I'm working on a spreadsheet to measure performance.
Target is 10% and below
If actual is below or equal to 10%, then 100% achievement
If actual is above 10%, From 11% to 20%, then achievement is 90% and so on down until 0%
If actual is beyond 20%, then achievement should not exceed 0%
i am needing to issue a dos command in excel? basically i need to send a target link to a file. i cant use a hyper link for several reasons, and this is the only way i know how to go about this.
View 2 Replies View Relatedim trying to sum the cells C20:F20 while having cell E20 multiplied by cell C4 without having the product exceed 50.
View 9 Replies View RelatedI have some alphanumeric mixed data which is from 15 digits to 18 digits. In each data there have 5 zeros in the middle. I want to keep all the alphanumeric to 15 digits only. It will delete the zeros not any other value which length is greater than 15 digits. If a length of a character is 17 digit it will delete 2 zeros & if it is 15 digit then keep it constant.
Like: AJSPP00000125467 change to AJSPP0000125467.
I have attached a portion of a schedule I have been asked to update to show when more hours are scheduled for a time period than are available on the schedule.
Each Dept.(Man. and DCC) has 16 hours available per day, M-F.
How can I chart or show somehow when a conflict arises? I need to outsource the excess time to another facility in a timely fashion.
Attached File: GKirbywork overload.xlsx
Each car has a value, and each car has odds.
I must choose 5 cars, and the value cannot exceed 100.
I typed in all my data, can Excel choose the best possible lineup for me?
In the end, I need the lowest result possible while only using 100 pts in
value.
I am using Excel 2003
Here is a sample of my data.
Car # Value Odds (#to1) (Result=Value x Odds)
123.5494.00
223.45117.00
322.85.75131.10
422.66.75152.55
522.212.5277.50
62315345.00
71523.5352.50
82217.5385.00
921.820436.00
1019.523.5458.25
1121.623.5507.60
122125525.00
1321.725542.50
141930570.00
1522.130663.00
1620.335710.50
1721.934744.60
182040800.00
1918.845846.00
2018.647.5883.50
I need to populate blanks in a column without exceeding the last row of data
View 5 Replies View RelatedThe code segment from "Get Around Excels 3 Criteria Limit in Conditional Formatting" works perfectly if I type the variable directly into the cell, but not in a range of cells. That is to say, if I copy the source cell to a range of cells I receive a "Run-time error 13: Type mismatch" error". Is there a way to get around this? This is the code segment I've tried in the worksheet.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer
If Not Intersect(Target, Range("b2:q53")) Is Nothing Then
Select Case Target
Case "IBBCH", "ibbch"
icolor = 36 'light yellow
Case "OBBCH", "obbch"
icolor = 34 'light turqoise
Case "OBBRDG", "obbrdg"
icolor = 35 'light green
Case "LNCH", "lnch".........................
I got an excel sheet were in column A i have listed a few names and in column B I got their respective results (numbers) with a background color.
I want to insert a function in such a way that when their numbers exceed a certain number the background color changes from for example blue to green.
so >1200 = blue background color
1200-1350 = red
< 1350 = green
I have main worksheet (target a) that I am trying to populate data from target(worksheet) b. The data I am trying to get from target b changes every month,(declining balance) based on a new month. So how can I get financial data from different cell each month from "b" into same cell in "a"? (so "A" # would be overwritten in same cell based on new # from "B". I have tried VLookup but can't be doing something correct.
View 2 Replies View RelatedI have a large dataset (24000 rows) that requires me to multiply two different columns of integers. In some cases, the two integers are both negative and multiplying them results in a product that is positive. I actually need that product to be negative rather than positive. I can't quite seem to figure out the best way to accomplish this.
View 5 Replies View RelatedI am using a piece of track changes VBA code mentioned on this site, which among other things creates a new column that reports the number of any cell that has been changed (e.g., $K$32). What I would like to do is, next to that cell, report the title of the row in which that cell appears. In other words, if someone changes cell $K$32, for easier reference I'd like others to be able to see that this cell appears in a row titled "New Sales". I'll be happy to clarify with more specifics if need be.
View 2 Replies View RelatedI have data that comes from a subsytem that places the negative sign at the right of the number, so it is recognized as text. I can get around this using find and replace and then a second step to multiply that by -1, but is there a formula that can do this for me?
I was trying if(right(A1,1)="-",TBD,A1)
I have data starting in E7. I want it to go down the column and find the negative numbers. If it finds one then I want it to change the number in the row to the left of it to a negative. So if E67 is a negative number, make D67 a negative and so forth down the line Sounds "simple" but how do I do it?
View 7 Replies View RelatedI have data in range J2:J365 , H368:H401 & J403:J827. i want to check wether this range have negative values or not if yes load all negative values in the listbox1 by clicking checkbox.
View 3 Replies View RelatedI want to create a chart that shows "Gap to Target. See attached Sample spreadsheet for more info.
Note how the yellow part of the chart is formulaic...is actually the chart...and the green bar over it is manually pasted. That green bar is supposed to be "result" and that yellow gap is supposed to represent the difference between Targeted sales and the actual Result.
How to actually build the green part into the chart? Every time I try, it just adds them together and doesn't show the gap.
Example.xlsx‎
Is it possible to add a value to a target cell without VBA Ie I have 3 worksheets and I would like to pull a varying cell value from each sheet to give me cumulative total on another sheet in a single cell.
View 2 Replies View RelatedI have a simple sub below (CopyData) to copy a cell value (I2) to next unused row in column O. If I run the sub from the VB editor, it runs fine doing exactly what I intend to do.
I've tried several macros to cause this sub to run when the value of cell I2 changes but they all behave the same way. I am initiating worksheet changes using the F9 function key. I2 changes every time I press F9 but the CopyData sub doesn't run.
Below is the latest attempt:
Code:
Sub CopyData()
Range("I2").Copy
Sheets("Calculations").Range("O" & Rows.Count).End(xlUp).Offset(1, 0).PasteSpecial xlPasteValues
End Sub
Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$I$2" Then
Call CopyStuff
End If
End Sub
Im tring to run the procedure called KeyEventsOn ONLY when a single cell in range E29:E30 changes.
The Intersect and Target are borrowed from a book , I dont fully understand how these work. I am assuming that 'Target' should simply reflect the currently selected range, and the 'intersect' function runs a check as to whether the target is in the range to be checked.
The problem Im having is the variable 'Target'. If the above is true, why for example when I type 'ABC' into the current selected cell does the variable 'Target' show as "ABC" and not "$E$29" (or whatever cell is selected)...
what the Taget.Address relates to in VBA. I cant figure it out, how can this be used?
View 9 Replies View Relatedin selection change event how to identify formula in target?
View 9 Replies View Relatedwhat i need to do to track daily sales with 10% growth from previous year total sales.
I have 12 separate sheets for each month.
On each sheet i have separate columns"date" "goal" "actual" "% from goal".
What function/formula is needed to calculate the daily target goal taking into account that weekends are busier
I am trying use target Bval in a sheet. Can I give conditions like if only the value is number then trigger the code else no. Is there a possibility???
View 6 Replies View RelatedBasically, I'm trying to do this:
View 11 Replies View RelatedHow would I set up a series of CASES depending on the Target.Value (a doubleclick code within spreadsheet) such that IF target value isblank, then change to Ö. If target value is Ö, then change to "NA". If target value is "NA" then clear contents
Would CASE be the best way to go or a series of IF's?
I am building a sheet of sales targets for 2009. With each month allocated a certain percentage of the annual target.
I wish to be able to take into account a change of target at some point in the year.
If i were to change the annual target in June, i need the spreadsheet to only change the monthly targets from June onwards, January - May are finished.
In the example attached there is a change in annual target in June. How do i calculate what the remaining month's targets need to be in order to meet the annual target while taking into account what has already been achieved and the shape of the budget as indicated by the percentages??
I have a row of data that holds dispatch values by week. I have a second row of data that holds stock levels by week. I simply want to create a third row that tells me how many weeks of demand a stock level will cover.
The data looks like this (comma deliminated):
Week, 1, 2, 3, 4, 5, 6, 7, 8, 9
Stock, 26490, 24490, 22490, 20490, 18490, 14239, 17898, 13646, 9393
Dispatch, 2000, 2000, 2000, 2000, 4251, 4251, 4252, 4253, 2350
In this example week 1 would have 9 weeks of stock cover, week 2 - 8 weeks and week 3 - 7 weeks of cover.
This is calculated by summing along the dispatch row until the cumulative sum of dispatch exceeds the current week stock level; then counting the number of weeks in the sum that cumulatively are less than (but closest to without being over) the total stock of that week.
Currently we manually create a massive array that sums along up to 26 weeks in advance and then have a manual formula that finds the maximum value below the target. This then outputs the column reference and then calculates the number of weeks based on the difference between the week column and the column highlighted.
How can I target just a "date" in any format?
=IF(A2>"any date",A2,B2)
I've been trying to configure my formula in Worksheet_Change to only run when targeted cells are being changed (by using Target). I don't get it to work properly.
A cell value is supposed to change in column AK when the equivalent cell in column H is changed. se my formula below.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Column = "H" Then
Dim LastRow As Long
[Code].....
Anyone used to work with Worksheet_Change Target who can see how I use Target wrong?
I need to be able to get the color of my target cell (the target could be in red green or blue - background or foreground color could be used) - I realize this requires the use VBA, which I know nothing about - I want to find the color NOT change it or manipulate it in any way
View 9 Replies View Related