Automatically Populate Data From Target B Worksheet Into Target A Worksheet
Dec 3, 2012
I have main worksheet (target a) that I am trying to populate data from target(worksheet) b. The data I am trying to get from target b changes every month,(declining balance) based on a new month. So how can I get financial data from different cell each month from "b" into same cell in "a"? (so "A" # would be overwritten in same cell based on new # from "B". I have tried VLookup but can't be doing something correct.
I've been trying to configure my formula in Worksheet_Change to only run when targeted cells are being changed (by using Target). I don't get it to work properly.
A cell value is supposed to change in column AK when the equivalent cell in column H is changed. se my formula below.
Code: Private Sub Worksheet_Change(ByVal Target As Range) If Target.Column = "H" Then Dim LastRow As Long
[Code].....
Anyone used to work with Worksheet_Change Target who can see how I use Target wrong?
I'm trying to run a macro anytime cells G2, J2, M2, O2, P2, S2, V2, Y2, AB2, AE2, AH2, AK2, AN2, AQ2 change.
Right now I have the below code which is working well, but I only have it set for G2. Do you know what the notation is to make the target range multiple cells?
Also, I use the xlDown command in my sorting code, but later on it reverts back to "A5:AT60"... is there any way I can remove these specific cell references? I want to avoid having to re-write the macro every time my selection shrinks or expands.
Code: Private Sub Worksheet_Change(ByVal Target As Range) If Not Intersect(Target, Range("G2")) Is Nothing Then Rows("5:5").Select
I need to hide/unhide a couple of rows based on the result of a formula in the Target Range. Basically, Cell D2 contains the results of a sum (a+ B), if this is greater than 10,000, unhide the next row.
Below is an example from the ozgrid forum illustrating the worksheet change event. Not sure of the meaning of 'Do nothing if more than one cell is changed" on the 2nd row of the code. Does it means that if a value is entered in other cells, the code will not fire?
Private Sub Worksheet_Change(ByVal Target As Range) 'Do nothing if more than one cell is changed or content deleted If Target.Cells.Count > 1 Or IsEmpty(Target) Then Exit Sub If Target.Address = "$A$1" Then 'Ensure target is a number before multiplying by 2 If IsNumeric(Target) Then 'Stop any possible runtime errors and halting code On Error Resume Next 'Turn off ALL events so the Target * 2 does not _ put the code into a loop. Application.EnableEvents = False Target = Target * 2 'Turn events back on Application.EnableEvents = True 'Allow run time errors again On Error Goto 0 End If End If End Sub
i am needing to issue a dos command in excel? basically i need to send a target link to a file. i cant use a hyper link for several reasons, and this is the only way i know how to go about this.
Is there a way to write a Worksheet_SelectionChange (ByVal Target As Range) event in module after creating a sheet in VBA? I constantly delete a sheet, then repopulate it with a new one that is empty, but I need to add some code that happens if they should change a particular cell. It worked when I ran it on a worksheet without refreshing, but as soon as I cleared and repopulated the sheet, it was gone. Is there a way to preserve this?
when I manually delete a row or column in my worksheet - the macro target addresses do not update.
For example, I have a Target.Address of B5 If I delete column A from the worksheet, I want the macro Target.Address to update to A5. Currently the Target.Address remains B5 even though the cell I am interested in has now moved to A5...
Here is my worksheet Sub Macro1()
If Range("B5") = "Yes" Then Rows("6:10").EntireRow.Hidden = False Else Rows("6:10").EntireRow.Hidden = True Range("C6:C10").ClearContents End If
End Sub
Here is my workbook Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address(False, False) = "B5" Then Call Macro1
I have emails automatically being sent based on what is entered in the attendance columns, but now I need emails being sent on what is entered in the comments columns. Because the target range changes, I do not know how to combine them.
Private Sub Worksheet_Change(ByVal Target As Range) If Intersect(Target, Range("A11:A50, F11:F50, K11:K50, P11:P50, A55:A94, F55:F94")) Is Nothing Then Exit Sub If LCase(Target) = "no" Then Call RouteActiveWorkbook(Target.Offset(, 1), Target.Offset(, 2), Target.Offset(, 3)) If LCase(Target) = "ex" Then Call RouteActiveWorkbook2(Target.Offset(, 1), Target.Offset(, 2), Target.Offset(, 3)) End Sub
This code results in two macros based on what it entered. Macro 1...........................
I am using a piece of track changes VBA code mentioned on this site, which among other things creates a new column that reports the number of any cell that has been changed (e.g., $K$32). What I would like to do is, next to that cell, report the title of the row in which that cell appears. In other words, if someone changes cell $K$32, for easier reference I'd like others to be able to see that this cell appears in a row titled "New Sales". I'll be happy to clarify with more specifics if need be.
I tried to search the forum for my unique problem but had no luck. As you will see attached, I have a series of excel buttons I need to duplicate and have target a different set of cells. I am hoping there is a way to avoid manually doing this.
The goal of the document is to push the button when both colours in the row and column interact (research on birds). There are two additional behaviours with an exact same set of buttons but they need to target "Body Rush" and "Food Displacement" tables underneath. I need all the buttons on one page since multiple behaviours happen simultaneously that need to be recorded.
I have something like 100+ modules in VBA I have created, I am hoping there is an easier way to do this so I don't have to create another ~200 modules in order to get the last two behaviours setup.
I am hoping there is either an easier button system or way to make buttons adjust somehow.
I have a macro that copies data from 6 different worksheets into one summary worksheet - based on certain criteria - I need a way to note on each row of the summary sheet which worksheet it was copied from. Each worksheet is specific to a salesperson, so ideally I would like that salespersons last name to populate in column on the summary page for each line of theirs that is copied over....here is my current macro I use to copy the data: (this scrpit is repeated for each sales persons sheet - "Blankenship", "Dew", etc...)
I have to complete information providing dates and names for a long number of individuals. Is it possible to set up the spreadsheet so that if you enter a date next a persons details in on worksheet their information is automatically updated in the relevant ones?
I am hoping to populate a column with data from another worksheet. Basically, I have a set of columns, one for Location, Zip Code, Longitude, and Latitude. I want a formula to say, if the location equals X, then pull the associated information from the other worksheet. -- I assume it would be an if or vlookup, or combination.
I'd like to create a macro such that when a person's name is typed in a cell, a separate set of cells populates with data pulled from a worksheet containing the person's data.
So, for example, I have created a scorecard template. Rather than have 50+ scorecards for each individual, I'd like to have one template upon which the individual's respective data can be pulled into the appropriate cells based on the name entered in another cell on the template (or a pop up in which the name is entered).
I'm trying to figure out a way to populate multiple cells automatically with certain information after entering info into a single cell on a separate worksheet in a separate workbook.
Our "master" sheet has 22 total columns (A-V), and our weekly "status" sheet only has 7 total columns (A, E, P, L, M, N, R).
Column A on both sheets is labeled "Sample Number". On the "status" sheet I want to be able to type, for instance, "2012-228" into A2 and have the corresponding values from Columns E, P, L, M, N, R on the "master" sheet automatically populate into B2-G2 on the status sheet if this is at all possible.
I have a userform that stores data (1 row record with 20 columns) to a worksheet.Is there a way to grab the data back in (other or the same)userform, ambent(correct) data and store them back in the same row in the worksheet?
I am fairly new to macros and have trouble with VBA. I have a file with multiple worksheets. Each worksheet contains the name of a specific location in cell A8. I want this name in cell A8 to be the name on the worksheet tab for each worksheet in my file but do not know how to accomplish this. Is that even possible?
I have inherited a number of databases in work (running Office 2003). It has quickly become apparant that a vast amount of work is duplicated and so i am trying to cut down the data input and therefore the possible errors.......
I have narrowed most of the work down and now have a major worksheet (is that what you call a complete Excel file) named "master database" and several over minor files....
Currently what i am trying to do is to get the minor files (68 seperate files) to auto populate an area of the master database. I will try to explain it below...
1. Minor database has 2 columns with data i require to auto populate the master database. (1 column (B) is called 'off', the 2nd column (C) is called 'on').
2. A number will be inputed manually into either 'B' only or 'B and C' columns, depending on the criteria of the job..
3. The criteria of the job is dictated by column (Z) where the text 'A' or 'ATL' is inputed
4. The master database i would like to add up the numbers inputed as a total from columns 'off' and 'on' and place them into seperate columns 'E' and 'G' of the master database.
5. IF column (Z) shows 'A' then only column (B) 'off' is to be calculated and put into the master database at column (E)
6. IF column (Z) shows 'ATL' then BOTH columns (B and C) 'on' AND 'off' are to be added together and column (G) populated on the master database.....
To make matters more complex. An expiry date is shown on the master database at columns (D) and (F). IF column (E) does not exceed 12 by the expiry date, i would like the cell (D) to turn red IF column (G) does not exceed 10 by the expiry date, I would like the cell (F) to turn red
I want to create a chart that shows "Gap to Target. See attached Sample spreadsheet for more info.
Note how the yellow part of the chart is formulaic...is actually the chart...and the green bar over it is manually pasted. That green bar is supposed to be "result" and that yellow gap is supposed to represent the difference between Targeted sales and the actual Result.
How to actually build the green part into the chart? Every time I try, it just adds them together and doesn't show the gap.
Is it possible to add a value to a target cell without VBA Ie I have 3 worksheets and I would like to pull a varying cell value from each sheet to give me cumulative total on another sheet in a single cell.
I have a simple sub below (CopyData) to copy a cell value (I2) to next unused row in column O. If I run the sub from the VB editor, it runs fine doing exactly what I intend to do.
I've tried several macros to cause this sub to run when the value of cell I2 changes but they all behave the same way. I am initiating worksheet changes using the F9 function key. I2 changes every time I press F9 but the CopyData sub doesn't run.
Below is the latest attempt:
Code: Sub CopyData() Range("I2").Copy Sheets("Calculations").Range("O" & Rows.Count).End(xlUp).Offset(1, 0).PasteSpecial xlPasteValues End Sub
Sub Worksheet_Change(ByVal Target As Range) If Target.Address = "$I$2" Then Call CopyStuff End If End Sub
Im tring to run the procedure called KeyEventsOn ONLY when a single cell in range E29:E30 changes.
The Intersect and Target are borrowed from a book , I dont fully understand how these work. I am assuming that 'Target' should simply reflect the currently selected range, and the 'intersect' function runs a check as to whether the target is in the range to be checked.
The problem Im having is the variable 'Target'. If the above is true, why for example when I type 'ABC' into the current selected cell does the variable 'Target' show as "ABC" and not "$E$29" (or whatever cell is selected)...
I am starting within a workbook with a standard invoice/form. During the course of a month this invoice will be copied 20 to 30 times within the workbook and the amounts changed each time. Is there a way that I can:
a) Have amounts from 2 of the cells (say E30 and E31) within each new invoice worksheet automatically included on a summary page? These cells are calculated by formula.
b) (This one would be nice but is not essential) Have each new invoice worksheet that is added (by copying) automatically numbered sequentially in a cell (say A2) and also re-named with this number. The first existing invoice would be manually numbered and each additional invoice would follow from there.
