I need to keep track of my salesmen's time. However, the company will not pay for the first 45 minutes so I need a formula that says, if the time entered in under "worked" is less than 45 minutes, no time will be deducted. If the time entered is equal to or greater than 45 minutes, 45 minutes will be deducted. These are the columns needed and the Daily Hours would be the total of all the previous columns. WORKED TRAVELED LUNCH DAILY HOURS
View 2 RepliesI keep getting the "You've entered too many arguments for this function" error.
Here is the formula:
=IF(B15=D40,E40,"",IF(B15=D41,E41,"",IF(B15=D42,E42,"","Invalid Shipping option")))
I am trying to create a nested IF function (has 5 IF statements), however,
every time I put the brackets at the end of the function, it puts a little .
next to the false answer, removes the brackets and comes up with an error
message?
This is only happening on one particular PC, when I create the same formula
on other pC's, it works fine so I know my formula is correct.
is there a setting on the PC that must be wrong?
I have an assignment in which I have to use nested, IF, AND and OR functions. Does anyone know the syntax for this kind of function? Basically I have to determine leave time based on years of service and whether the employee is full time or part time. Part-time with less than 1.5 years of service = 0 days of leave Part-time over 1.5 and full-time under 1year = 3 days of leave and full time over 1 year = 5 days of leave. I know how to do a nested function, but I have not worked with both an AND and OR together.
View 10 Replies View RelatedThis formula seems to work fine for the first two logical tests, but when it come to adding the third, I get an error.
=IF(E5="Hourly",C5*D5,IF(E5="Daily",(C5*D5)*8,IF(E5="Weekly",(C5*D5)*32,''"))
I am receiving an error using the following string as I am not using the OR request properly.
=IF((+$B7&$C7&$D7&$E7)="","",IF(+D7="",+I6,+D7) OR IF(+D7="(blank)","",+D7))
I am struck in using IF /AND in nested function as follows,
A1B1C1D1E1F1G1
1 3 5 7 9 32
=IF(AND(F2>G2,AND(IF(A2>1,A2,AND(IF(C2>5,C2,AND(IF(E2>9,E2),""))
(Above, A1 to >G1 are cell address , in exact rows are actual values)
I am trying to concatenate the text of a few cells in a specific worksheet. I'm not wanting to use the STRING & STRING type code because I already had a Concatenate formula nested with an index formula and needed to have this formula copied to a certain RANGE, Where the RANGE was specified by a Variable. T
he Code below does what I need if the CONCATENATE/INDEX formula is in the cell that im copying already. (BELOW) The Formula in the cell, for example, on row 19 of worksheet "COMMISSION", that needs to be copied and incremented down the VARIABLE RANGE is
=CONCATENATE(INDEX(OUTPUTS!J:J,(ROW(OUTPUTS!J2)-1)*2+1)," ",INDEX(OUTPUTS!K:K,(ROW(OUTPUTS!K2)-1)*2+1)).
VB:
Dim iInput_Rows As Integer
iInput_Rows = Worksheets("Workspace").Range("D3").Value
Dim iOutput_Rows As Integer
iOutput_Rows = Worksheets("Workspace").Range("D1").Value
Dim iAnalog_Rows As Integer
[Code] ....
My problem is when I use the following code to insert that concatenate/index formula, through vba, then I get errors because it evidently doesnt like the " " for the space i needed between texts. (The Formula is concatenating text in those cells but every other Row) Can I do this in VBA?
VB:
Worksheets("COMMISSION").Range("B19 + iOutputs_Rows").Formula = "=CONCATENATE(INDEX(OUTPUTS!J:J,(ROW(OUTPUTS!J2)-1)*2+1)," ",INDEX(OUTPUTS!K:K,(ROW(OUTPUTS!K2)-1)*2+1))"
I'm writing a spreadsheet where I need to calculate a nested IF function (I think), and I am unsure of how to do it.
The problem is this:
The total $ value of the quote is entered, then depending on two variables, a rebate may be deducted from this total value. The first variable is eligibility (a Y/N response), the second is the type of project - there are two types of project and each attract a different rebate amount.
So I have:
A: total quote $
B: Eligibility - 'Y' or 'N' (if 'Y', then value of 'C' is deducted from 'A'), (if 'N', then no value is deducted from 'A')
C: Type - '1' or '2' (if '1', then 'C' = $1000), (if '2', then 'C' = $1600)
D: final result
I have multiple sheets within one Excel file. Each sheet is structured the same way. Column B lists Client's last names, which differ from sheet to sheet, though some clients may be repeated in several tabs. I have a column K which displays either the number 1 or 0. This is consistent between sheets.
I have created a formula that will look at the last name in a specific cell in column B of sheet 2 (FY 07) and search sheet 1 (FY 06) column B for the same last name.
=IF(MATCH($B5,'FY 06'!$B$5:$B$24,0),1,0)
If the same last name exists and if column K of sheet 2 and sheet 1 display a "1", I want it to place a 0 in the formula cell.
So, if there is a client that is in both sheets and has a "1" in both columns K of each sheet, I want the formula to let me know.
following
i tried formula =IF(F$1
I amtrying to find a way to nest a formula in the Match function.
How can i make the following formula more dynamic so that I do not specify the colum "AY"?
=MATCH(11,Data!$AY:$AY,0)
The information is contained in column AY labeled "New-Rate" in the data sheet
i have several days trying to convert a If nested function in a automate macro, the problem is that i have a lot of formulas, and the machine becomes slow, so i have to apply this formula to "column G"
=IF(LEFT(F2;1)="J";"C";IF(LEFT(F2;1)="g";"C";(IF(ISERROR(VLOOKUP(F2;rifs;1;FALSE));"NC";"C"))))
I receive montly investment performance projections going out monthly for 10 years. I need to show the return annually for each year. I created a SUMIFS formula to sum the percentages between two date ranges (beginning of the year and the end of the year for each year). However, my SUMIFS formula does not take into considersation compounding. How can I modify the SUMIFS formula I created to take into consideration compounding?
I know how to convert monthly percentages to an annual percentage,using the PRODUCT formula =PRODUCT(1+T15,1+U15,1+V15,1+W15,1+X15,1+Y15,1+Z15,1+AA15,1+AB15,1+AC15,1+AD15)-1, whereas T15:AD15 is the monthly percentage gain. Is there a simplier/alternative way that I can incorporate into the SUMIFS formula?
If it is too complicated to utilize a SUMIFS formula, I would like to be able to select a range of cells and have Excel calculate the result vs typing "1+[select the cell]," for each month. It takes me forever and open to input errors. It would be much easier to be able to select a range of cells when creating the formula.
I am creating a worksheet and I have a formlua where the value is text. I can make it work standing alone but not with other variables. =IF(E11=S1,0)+(IF(E12=S1,0)+(IF(E13=S1,0.0025))+IF(E14=S1,"Call for Prciing"))
View 2 Replies View RelatedI want to substitute the following "special" characters for an underscore. i need to do 9 different characters!!! is there another way?
as you are limited to 7!!!
excel 2003!
=INDIRECT("_animal_"&SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(C2," ","_"),"/","_"),"-","_"),"&","_"),"~","_"), "(", "_"), ")", "_"), "$", "_"), ":", "_"))
is there a way to turn the following formula into a function ?
=IF( COUNTA(A1:A7)=SUMPRODUCT((A1:A7<>" ")/COUNTIF(A1:A7,A1:A7&"")),"No Duplicates","Duplicates")
I just have no idea where to start ?
I had more than 7 nested if statements so I attempted to formulate the named ranged formula. My 2 ranges are as follows: LDD1=IF(MONTH(P1)=MONTH(F2),C5-F5,IF(MONTH(P1)=MONTH(G2),C5-G5,IF(MONTH(P1)=MONTH(H2),C5-H5,IF(MONTH(P1)=MONTH(I2),C5-I5,IF(MONTH(P1)=MONTH(J2),C5-J5,IF(MONTH(P1)-MONTH(K2),C5-K5,IF(MONTH(P1)=MONTH(L2),C5-L5))))))) LDD2=IF(MONTH(P1)=MONTH(L2),C5-L5,IF(MONTH(P1)=MONTH(M2),C5-M5,IF(MONTH(P1)=MONTH(N2),C5-N5,IF(MONTH(P1)=MONTH(O2),C5-O5,IF(MONTH(P1)=MONTH(P2),C5-P5,IF(MONTH(P1)-MONTH(Q2),C5-Q5))))))
Basically what it's doing is comparing the current month with the month in the column heading and calculating appropriately. However, when i input the if statement (=if(LDD1,LDD1,LDD2), i get an error saying that it's an inconsistent formula and the result that it gives is wrong, too. Problem cell is e5
I am working on creating a simple Excel Database of an Engineering Tool Room Inventory for work. However I can not seem to get one particular 'NESTED IF Function' to do what I want it to do. (In advance warning, I may be going down the wrong route and might have used the wrong Formula in Excel but from my understanding the 'IF' function seemed the most plausible.
Issue: All I would like to do is for a NESTED IF Function to be able to say this:
1. When a user inputs data into one column, for example 'Column A', with the following data: 4" Square
2. Then the neighbouring column, for example 'Column B', would have a NESTED IF Function.
3. Which would output a logical response, "A, B, C, D, E, F etc...", depending on what is written in Column A.
If 'Column A' - 4" Square, Then 'Column B' - A
If 'Column A' - 5" Square, Then 'Column B' - B
& So on...
But the NESTED IF Function should only put a logical response if there is certain values within the cell, for example:
User types a value into 'Column A' which contain - 4 & S, Then 'Column B' - A
User types a value into 'Column B' which contain - 5 & S, Then 'Column B' - B
& So on...
Currently to do the above function, I have utilised the following Excel NESTED IF Function:
[Code] .....
& The following happens:
1. User inputs data into 'Column A'
2. The NESTED IF Function then provides an automatic response.
3. However it relies on the data being inputted without the ' " (Quotation Symbol)'
4. & With me defining the exact phrase that should be typed into the cell, for example, "4" Square"
Other: I have attached an example worksheet of the NESTED IF Function in practice, with two tables. One showing what is happening with the code above and one table showing what I would like to happen but with no function.
Example - IF Function.xlsx
I setup this function to pull my staff's schedule an auto generate the forms i need however the lookup function works properly sometimes and improperly others i checked the syntax and it is correct how ever the wrong data is continually returned. I have attached the file if anyone can help. the VISUAL PLAN tab is the one contaning the formula and it pulls data from PLAN, CURENT SCHEDULE, AND CATAGORY SUMMARY however the only formulas hat i have a problem with are the ones referencing CURENT SCHEDULE.
View 9 Replies View RelatedI am entering the following Nested IF(AND statement into a cell and getting a message stating "You've entered too many arguments for this function." Any idea on what formula I can use to get the needed information into this cell based on the fact that there are different inputs that can be entered into the related cell that will trigger the needed respons in the working cell?
=IF(AND(K1051="Down",L1051<2),"Yes","",IF(AND(K1051="Partially Down",L1051<2),"Yes",""))
I have two columns of data. for example:
Column A
1
3
4
0
2
0
0
3
Column B
Product A
Product A
Product B
Product B
Product A
Product A
Product B
Product B
What I need the function to return is:
Product A - 3
Product B - 2
This is what I thought the function should look like but it is not working:
=IF(A6:A50>0,COUNTIF(A6:A50,"Product A"),0)
If Product A or B did not have any values >0, it would return a zero.
This one should be a bit more simple, (vlookups I think)
I have a list of clients, and client codes
so:
CODE_____CLIENT
001 Mr. A
002 Mr. B
003 Mr. C
And on the time sheets, we must put the client, and the code.
So
0004 Mr D
But we have to type that in manually (code and client)
Can we use a formula, so that when we type the client, the code will appear? Granted that the name will have to be exactly perfect.
Also, how it it possible, to make a list of possibles to appear, when typinig?
eg, if I type Graem
a list will appear underneath saying the possibilities.
such as
Graem
-Graeme A
-Graeme B
-Graeme C
ETC.
See workbook attached.
I'm looking for help to detemine rates so it automates in the sheet.
Can you give me assistance and code perhaps ? I'm pretty basic at V-Lookup and If functions. Is this the best route to take ?
All is explained within the workbook.
Not sure where the best to ask this is so i'll do it here.
I have a h:mm time which i need to get converted into days/hours/minutes, creating an on the fly phrase of something like "2 days, 4 hours, 32 mins" for example.
eg: 26:45 (hours/minuts) to be converted to "1 day(s), 2 hours, 45 minutes"...
I am having trouble with this formula
=IF(E4-D4 < 1/24*7.1,E4-D4,E4-D4-1/24)*24
it works well unless the staff member works past midnight. I get a negative hours worked value returned.
for eg
E4=8AM and D4 is 5PM i get an answer of 9 hours in F4, this is all good but if the start time E4=4PM and the finish is D4=1AM then I get the result of -15 hours in F4
I have a system that enters the ID in the first column, the date and time in the second and third columns and the sense (IN/OUT) in the fourth column, for each employee that enters/exits the premises. Note that not only the in /out can occur over midnight, but also I have the situation of having two periods of the same employee in the same day.
The objective is to obtain in some way a daily report for each ID (employee).
we work 8hrs 30mns for 4 days 7hrs 30mns for 1 day this is monday to friday
using Excel i need a formula that will add the following:-
a1 8.30
a2 8.30
a3 8.30
a4 8.30
a5 7.30
total 41.30
I am trying to make a timesheet in Excel 2007 with a formula.
I want it to read:
IN = 8:30 AM, OUT = 11:30 AM, IN = 12:30 PM, OUT = 4:30 PM
The total hours will be 8 because there is an hour for lunch.
And if I work a few hours one day and leave before lunch, I want the calculation to be right. I found a formula but it wouldn't add the lunch hour and I added a +1 in the formula but it makes the calculations wrong for when I work for only 2 or 3.
When people enter their hours I get them to do it in 24hr format, fine. BUT my problem is coming when I'm working out wages etc. I can get the user to enter 09:00 (start time) and 17:30 (end time) but then the cell works out the hours (cell 2-cell1) gives 8.30 in time format when I need it to show 8.5 (total hours worked)
This means when it goes to work out wages, it takes 8.5*hourly rate not 8.3!!