I am struck in using IF /AND in nested function as follows,
A1B1C1D1E1F1G1
1 3 5 7 9 32
=IF(AND(F2>G2,AND(IF(A2>1,A2,AND(IF(C2>5,C2,AND(IF(E2>9,E2),""))
(Above, A1 to >G1 are cell address , in exact rows are actual values)
I keep getting the "You've entered too many arguments for this function" error.
Here is the formula:
=IF(B15=D40,E40,"",IF(B15=D41,E41,"",IF(B15=D42,E42,"","Invalid Shipping option")))
I am entering the following Nested IF(AND statement into a cell and getting a message stating "You've entered too many arguments for this function." Any idea on what formula I can use to get the needed information into this cell based on the fact that there are different inputs that can be entered into the related cell that will trigger the needed respons in the working cell?
=IF(AND(K1051="Down",L1051<2),"Yes","",IF(AND(K1051="Partially Down",L1051<2),"Yes",""))
I am receiving an error message for a nested if statement. Excel is telling me my statement contains too many variables.
I am using a VLOOKUP to look up data in a table based upon a result in the first table, however, the entry that is returned is different based upon a unique cell value.
Would anyone have any suggestions on how to shorten this down?
=IF(CR="AG",IF(ISBLANK(A7),"",IF(ISNA(VLOOKUP(A7,SI.xls!$A:$G,3,FALSE))=TRUE," ",VLOOKUP(A7,SI.xls!$A:$G,3,FALSE))),
IF(CR="G",IF(ISBLANK(A7),"",VLOOKUP(ISNA(VLOOKUP(A7,SI.xls!$A:$G,4,FALSE))=TRUE," ",VLOOKUP(A7,SI.xls!$A:$G,4,FALSE))),
IF(CR="MG",IF(ISBLANK(A7),"",VLOOKUP(ISNA(VLOOKUP(A7,SI.xls!$A:$G,5,FALSE))=TRUE," ",VLOOKUP(A7,SI.xls!$A:$G,5,FALSE))),
IF(CR="C",IF(ISBLANK(A7),"",VLOOKUP(ISNA(VLOOKUP(A7,SI.xls!$A:$G,6,FALSE))=TRUE," ",VLOOKUP(A7,SI.xls!$A:$G,6,FALSE)))),
IF(CR="UC",IF(ISBLANK(A7),"",VLOOKUP(ISNA(VLOOKUP(A7,SI.xls!$A:$G,7,FALSE))=TRUE," ",VLOOKUP(A7,SI.xls!$A:$G,7,FALSE)))))))
I have a student grade worksheet with this formula and it returns # DIV/0 which I need to solve the problem. I have tried many different ways and none seem to work. Con someone assist with this problem. Here is the formula:
= SUM(R13,R55,R97,R139,R181)/(COUNTIF(R13,">0")+(COUNTIF(R55,">0")+(COUNTIF(R97,">0")+(COUNTIF(R139,">0")+(COUNTIF(R181,">0"))))))
I am trying to create a nested IF function (has 5 IF statements), however,
every time I put the brackets at the end of the function, it puts a little .
next to the false answer, removes the brackets and comes up with an error
message?
This is only happening on one particular PC, when I create the same formula
on other pC's, it works fine so I know my formula is correct.
is there a setting on the PC that must be wrong?
I have an assignment in which I have to use nested, IF, AND and OR functions. Does anyone know the syntax for this kind of function? Basically I have to determine leave time based on years of service and whether the employee is full time or part time. Part-time with less than 1.5 years of service = 0 days of leave Part-time over 1.5 and full-time under 1year = 3 days of leave and full time over 1 year = 5 days of leave. I know how to do a nested function, but I have not worked with both an AND and OR together.
View 10 Replies View RelatedI am using VBA to put a formula into a cell. The formula is
VB: = IFERROR(VLOOKUP(LEFT(A5,11), 'New Quarterly Report'!A$11:E$37,3,FALSE), " - ")
But when I try to put this into a cell using the value option, I get a run time error 13: Type Mismatch. No problems while im compiling it but it comes up only during execution
VB: Sheets("Summation Table Template").range("B4").Value = "= IFERROR(VLOOKUP(LEFT(A5,11),'New Quarterly Report'!A$11:E$37,3,FALSE), " - ")"
When I try to put only the VLOOKUP, it works fine.
VB: Sheets("Summation Table Template").range("B4").Value = "= VLOOKUP(LEFT(A5,11),'New Quarterly Report'!A$11:E$37,3,FALSE)"
But I want the cell to not show #N/A when a value through vlookup is not found. Other formulas Iv tried are to use ISERROR with IF and also to store the formaula in a string and then put it into Range.Value but it still gives me a run time error 13.
I have a Userform which has 2 textboxes. User enter his employee id on textbox1 then enters a valid break time code which are 1,2 and 3 on textbox2. If User typed 1 then first breaktime start time will be pasted on the worksheet. When User returns after break he then enters his employee id again and then type 1 to end his first breaktime, the end time will be pasted on the worksheet. My program works fine however, I am trying to place a code which will prompt the user to end his first break time before entering another valid break code. Kindly check my code below as I am receiving an error message. 'Run-time error 9' Subscript out of range. This thing is driving me nuts. Any advise or can you tweak my coding vba experts.
View 14 Replies View RelatedThis formula seems to work fine for the first two logical tests, but when it come to adding the third, I get an error.
=IF(E5="Hourly",C5*D5,IF(E5="Daily",(C5*D5)*8,IF(E5="Weekly",(C5*D5)*32,''"))
I am receiving an error using the following string as I am not using the OR request properly.
=IF((+$B7&$C7&$D7&$E7)="","",IF(+D7="",+I6,+D7) OR IF(+D7="(blank)","",+D7))
I need to keep track of my salesmen's time. However, the company will not pay for the first 45 minutes so I need a formula that says, if the time entered in under "worked" is less than 45 minutes, no time will be deducted. If the time entered is equal to or greater than 45 minutes, 45 minutes will be deducted. These are the columns needed and the Daily Hours would be the total of all the previous columns. WORKED TRAVELED LUNCH DAILY HOURS
View 2 Replies View RelatedUsing Excel 2010.
I extracted data from .pdf to Excel using Able2Extract. Now I need to scrub the output a bit.
I see commonalities in the data for the start and stop of each set of data that I can key in on.
Once I find the start and stop points for each set of data I would like to fill all rows in-between the points and then discard anything that remains outside of these boundaries.
I have something wrong in my logic, way too many rows are deleted.
Code:
Option Explicit
Sub GetLineSets()
'Purpose: Identify relevant line sets, delete all other rows
Dim wbBook As Workbook
Dim wsData As Worksheet
Dim strFormula As String
Dim lngRows As Long
Dim C As Range
Dim blnFlag As Boolean
[Code] ......
I am trying to concatenate the text of a few cells in a specific worksheet. I'm not wanting to use the STRING & STRING type code because I already had a Concatenate formula nested with an index formula and needed to have this formula copied to a certain RANGE, Where the RANGE was specified by a Variable. T
he Code below does what I need if the CONCATENATE/INDEX formula is in the cell that im copying already. (BELOW) The Formula in the cell, for example, on row 19 of worksheet "COMMISSION", that needs to be copied and incremented down the VARIABLE RANGE is
=CONCATENATE(INDEX(OUTPUTS!J:J,(ROW(OUTPUTS!J2)-1)*2+1)," ",INDEX(OUTPUTS!K:K,(ROW(OUTPUTS!K2)-1)*2+1)).
VB:
Dim iInput_Rows As Integer
iInput_Rows = Worksheets("Workspace").Range("D3").Value
Dim iOutput_Rows As Integer
iOutput_Rows = Worksheets("Workspace").Range("D1").Value
Dim iAnalog_Rows As Integer
[Code] ....
My problem is when I use the following code to insert that concatenate/index formula, through vba, then I get errors because it evidently doesnt like the " " for the space i needed between texts. (The Formula is concatenating text in those cells but every other Row) Can I do this in VBA?
VB:
Worksheets("COMMISSION").Range("B19 + iOutputs_Rows").Formula = "=CONCATENATE(INDEX(OUTPUTS!J:J,(ROW(OUTPUTS!J2)-1)*2+1)," ",INDEX(OUTPUTS!K:K,(ROW(OUTPUTS!K2)-1)*2+1))"
I'm writing a spreadsheet where I need to calculate a nested IF function (I think), and I am unsure of how to do it.
The problem is this:
The total $ value of the quote is entered, then depending on two variables, a rebate may be deducted from this total value. The first variable is eligibility (a Y/N response), the second is the type of project - there are two types of project and each attract a different rebate amount.
So I have:
A: total quote $
B: Eligibility - 'Y' or 'N' (if 'Y', then value of 'C' is deducted from 'A'), (if 'N', then no value is deducted from 'A')
C: Type - '1' or '2' (if '1', then 'C' = $1000), (if '2', then 'C' = $1600)
D: final result
I have multiple sheets within one Excel file. Each sheet is structured the same way. Column B lists Client's last names, which differ from sheet to sheet, though some clients may be repeated in several tabs. I have a column K which displays either the number 1 or 0. This is consistent between sheets.
I have created a formula that will look at the last name in a specific cell in column B of sheet 2 (FY 07) and search sheet 1 (FY 06) column B for the same last name.
=IF(MATCH($B5,'FY 06'!$B$5:$B$24,0),1,0)
If the same last name exists and if column K of sheet 2 and sheet 1 display a "1", I want it to place a 0 in the formula cell.
So, if there is a client that is in both sheets and has a "1" in both columns K of each sheet, I want the formula to let me know.
following
i tried formula =IF(F$1
I amtrying to find a way to nest a formula in the Match function.
How can i make the following formula more dynamic so that I do not specify the colum "AY"?
=MATCH(11,Data!$AY:$AY,0)
The information is contained in column AY labeled "New-Rate" in the data sheet
i have several days trying to convert a If nested function in a automate macro, the problem is that i have a lot of formulas, and the machine becomes slow, so i have to apply this formula to "column G"
=IF(LEFT(F2;1)="J";"C";IF(LEFT(F2;1)="g";"C";(IF(ISERROR(VLOOKUP(F2;rifs;1;FALSE));"NC";"C"))))
I receive montly investment performance projections going out monthly for 10 years. I need to show the return annually for each year. I created a SUMIFS formula to sum the percentages between two date ranges (beginning of the year and the end of the year for each year). However, my SUMIFS formula does not take into considersation compounding. How can I modify the SUMIFS formula I created to take into consideration compounding?
I know how to convert monthly percentages to an annual percentage,using the PRODUCT formula =PRODUCT(1+T15,1+U15,1+V15,1+W15,1+X15,1+Y15,1+Z15,1+AA15,1+AB15,1+AC15,1+AD15)-1, whereas T15:AD15 is the monthly percentage gain. Is there a simplier/alternative way that I can incorporate into the SUMIFS formula?
If it is too complicated to utilize a SUMIFS formula, I would like to be able to select a range of cells and have Excel calculate the result vs typing "1+[select the cell]," for each month. It takes me forever and open to input errors. It would be much easier to be able to select a range of cells when creating the formula.
I am creating a worksheet and I have a formlua where the value is text. I can make it work standing alone but not with other variables. =IF(E11=S1,0)+(IF(E12=S1,0)+(IF(E13=S1,0.0025))+IF(E14=S1,"Call for Prciing"))
View 2 Replies View RelatedI want to substitute the following "special" characters for an underscore. i need to do 9 different characters!!! is there another way?
as you are limited to 7!!!
excel 2003!
=INDIRECT("_animal_"&SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(C2," ","_"),"/","_"),"-","_"),"&","_"),"~","_"), "(", "_"), ")", "_"), "$", "_"), ":", "_"))
is there a way to turn the following formula into a function ?
=IF( COUNTA(A1:A7)=SUMPRODUCT((A1:A7<>" ")/COUNTIF(A1:A7,A1:A7&"")),"No Duplicates","Duplicates")
I just have no idea where to start ?
I had more than 7 nested if statements so I attempted to formulate the named ranged formula. My 2 ranges are as follows: LDD1=IF(MONTH(P1)=MONTH(F2),C5-F5,IF(MONTH(P1)=MONTH(G2),C5-G5,IF(MONTH(P1)=MONTH(H2),C5-H5,IF(MONTH(P1)=MONTH(I2),C5-I5,IF(MONTH(P1)=MONTH(J2),C5-J5,IF(MONTH(P1)-MONTH(K2),C5-K5,IF(MONTH(P1)=MONTH(L2),C5-L5))))))) LDD2=IF(MONTH(P1)=MONTH(L2),C5-L5,IF(MONTH(P1)=MONTH(M2),C5-M5,IF(MONTH(P1)=MONTH(N2),C5-N5,IF(MONTH(P1)=MONTH(O2),C5-O5,IF(MONTH(P1)=MONTH(P2),C5-P5,IF(MONTH(P1)-MONTH(Q2),C5-Q5))))))
Basically what it's doing is comparing the current month with the month in the column heading and calculating appropriately. However, when i input the if statement (=if(LDD1,LDD1,LDD2), i get an error saying that it's an inconsistent formula and the result that it gives is wrong, too. Problem cell is e5
I am working on creating a simple Excel Database of an Engineering Tool Room Inventory for work. However I can not seem to get one particular 'NESTED IF Function' to do what I want it to do. (In advance warning, I may be going down the wrong route and might have used the wrong Formula in Excel but from my understanding the 'IF' function seemed the most plausible.
Issue: All I would like to do is for a NESTED IF Function to be able to say this:
1. When a user inputs data into one column, for example 'Column A', with the following data: 4" Square
2. Then the neighbouring column, for example 'Column B', would have a NESTED IF Function.
3. Which would output a logical response, "A, B, C, D, E, F etc...", depending on what is written in Column A.
If 'Column A' - 4" Square, Then 'Column B' - A
If 'Column A' - 5" Square, Then 'Column B' - B
& So on...
But the NESTED IF Function should only put a logical response if there is certain values within the cell, for example:
User types a value into 'Column A' which contain - 4 & S, Then 'Column B' - A
User types a value into 'Column B' which contain - 5 & S, Then 'Column B' - B
& So on...
Currently to do the above function, I have utilised the following Excel NESTED IF Function:
[Code] .....
& The following happens:
1. User inputs data into 'Column A'
2. The NESTED IF Function then provides an automatic response.
3. However it relies on the data being inputted without the ' " (Quotation Symbol)'
4. & With me defining the exact phrase that should be typed into the cell, for example, "4" Square"
Other: I have attached an example worksheet of the NESTED IF Function in practice, with two tables. One showing what is happening with the code above and one table showing what I would like to happen but with no function.
Example - IF Function.xlsx
I setup this function to pull my staff's schedule an auto generate the forms i need however the lookup function works properly sometimes and improperly others i checked the syntax and it is correct how ever the wrong data is continually returned. I have attached the file if anyone can help. the VISUAL PLAN tab is the one contaning the formula and it pulls data from PLAN, CURENT SCHEDULE, AND CATAGORY SUMMARY however the only formulas hat i have a problem with are the ones referencing CURENT SCHEDULE.
View 9 Replies View RelatedI am trying to run create a simple macro that copies and paste special values - something I have done 100's of times but for some reason I keep getting an error message - even though I recorded the macro and didnt write it by hand - see below:
Sub Macro6()
Cells.Select
selection.Copy
selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
End Sub
For which I get 'Compile Error - Expected Function or Variable'
my lookup isnt returning the correct data- already tried sorting it doesnt work im pretty sure ive put in the correct formula
View 6 Replies View RelatedI want a UDF; = OK (f1,f2) each argument being an alternative function. If f1 returns an error message then use f2. Should be easy but I cannot get it to work.
View 5 Replies View RelatedI have two columns of data. for example:
Column A
1
3
4
0
2
0
0
3
Column B
Product A
Product A
Product B
Product B
Product A
Product A
Product B
Product B
What I need the function to return is:
Product A - 3
Product B - 2
This is what I thought the function should look like but it is not working:
=IF(A6:A50>0,COUNTIF(A6:A50,"Product A"),0)
If Product A or B did not have any values >0, it would return a zero.
