I have about 5 nested if statements in 5 different cells. The problem is I need to combine all 5 nested if statements into 1 cell. Can someone show me how this is done. I don't want to try vlookup since the ifs are already written. I named all of the formulas as one, two, three, four, five to help me keep track of them. Need to figure out what I have to do to combine all of the if statements into 1 cell.
View 4 RepliesI have been asked to go through some information which has over 200 000 lines, what I need to do is as follows:
where order number is unique, revenue source = "Unique"
where order number appears more than once, check division to see if it appears in more than one division, if it does revenue source = "Cross Selling", if it does not then revenue source = "Divisional Package"
I need all of the above in formula line which will be inserted in the revenue source column
I have attached the file with a sample of the information I am using.
I am doing an export of info from one system and running an excel spreadsheet to manipulate the data. The problem is..That the exported data sometimes will export info into combined cells. Look at attachment
This is what I need...
I need the ability to search all the info on the POC tab and pull it into the info tab, by searching on a system and returning the POC info..
I have tried the vslookup formula and it will return the first row not the second row which is where the info is that I need (shown Highlighted)
=VLOOKUP(A4,POC!A2:b50,2,FALSE)
I have a spreadsheet that i want to create a part number that contains 4 parts. Ex 1rl9. The cell i want this to be in is blank. What formula do i use to make the second character in the blank cell = r?
View 9 Replies View RelatedIf I have text in B1 (Apples)
And text in C1 (Bananas)
How do I write a formula in cell A1 that will combine the text of both so that it reads 'Apples Bananas' in cell A1?
Everything I can think of gives me errors.
If the admins or you would like to change or recommend a change, I am trying to figure out what the code would look like for cells B22:B28. I need it to count the number of occurrences of the part number in A4:A17 and then combine the applications from the corresponding cells in column F (F4:F170 into a single cell (B22:B28).
On sheet 2 I would manually copy/paste the list of part #s from sheet 1 and remove duplicates. The add the formula that I can't figure out into column 2.
if Cell A1 is NOT blank then
If cell b1 is blank then show I in cell c1
If cell b1 has a date (any date) then show C in cell c1
If cell b1 says "ongoing" then show O in cell c1
If cell A1 IS blank then c1 should show nothing.
I am trying to do a nested if formula but I can't get it to work.
The condition is: If value in cell R5 >0 then get the value in cel X29 on power 4.
=IF(R5>0,POWER(X29,4)
One of my macros is a tied to a worksheet_change. The macro runs and gives me the result that i want, however excel flips to the sheet that the sub is running for.
example:
Sheet1, Change the cell
excel flips the visible to sheet2
macro runs
Its kinda of annoying. I would like excel to stay on sheet1 where i am trying to finish data entry. I suspect it is how i have writen the macro. Any help at all on how to clean it up.. or a better way to write the same thing would be very appreciated.
Sub TermPlacement()
' Term_Placement Macro
' Uses the Value of Term to insert a formula repeatedly in a colum.
Dim sNFormula As String
Dim rTerm As Range
Dim rStart_Cell As Range
Dim rNpayment As Range
'The reference cell located directly above the first cell in column
Set rStart_Cell = Worksheets("Floor Plan").Range("$B$13")
'Additional set values....................
I am trying to run 2 for each loops inside another loop, and I was wondering if there is a way to move to the next value for all loops at the same time.
So when it reaches "Next starting, final, scal", all ranges move to the next cell before performing the formula.
I have 5 cells that data will be entered into:
1. AA6 2.AJ6 3.AS6 4.BB6 5.BK6
I'd like a formula that will return the value in the cell that was at the furthest point in the sequence above that wasn't a blank, so
if aa6=1, aj6=2, as6 was blank,bb6=3 it would return 3
if aa6=1, aj6= 2 and the rest were blank it would return 2 (the value in aj6)
I want the range in the VLOOKUP below to display its actual value - ie "'6 June 08'!$A:$C" in the formula rather than the actual variable name 'strResult'.
Sub PreviousCount()
strDate = "6 June 08"
strColumnRange = "$A:$C"
strResult = "='" & strDate & "'!" & strColumnRange
Dim i As Long
i = Range("A2"). CurrentRegion.Rows.Count
Range("D2:D" & i).FormulaR1C1 = "=IF(RC[-3]="""", ""Column A blank!"", IF(ISNA(VLOOKUP(RC[-3],strResult,3,0)), ""NEW INSTALL"", VLOOKUP(RC[-3],strResult,3,0)))"
End Sub
Application. ScreenUpdating = False
For FormulaRemake = 2 To 2000
Worksheets("Data"). Range("D" & FormulaRemake).Formula = ""=If(ISERROR(Data!W"" & FormulaRemake - 1 & "")"" & ""=True,"",Data!W"" & FormulaRemake - 1 & "")""
Next
Application.ScreenUpdating = True
I'm having troubles with the syntax for the .Formula part. I read that when you do this you're supposed to double quote everything, except if you need a "" in it...?
Should look like this when done right: =IF(ISERROR(Data!W1)=TRUE,"",Data!W1) Also is there anything besides ScreenUpdating that will make this code run faster?
I am working on creating a simple Excel Database of an Engineering Tool Room Inventory for work. However I can not seem to get one particular 'NESTED IF Function' to do what I want it to do. (In advance warning, I may be going down the wrong route and might have used the wrong Formula in Excel but from my understanding the 'IF' function seemed the most plausible.
Issue: All I would like to do is for a NESTED IF Function to be able to say this:
1. When a user inputs data into one column, for example 'Column A', with the following data: 4" Square
2. Then the neighbouring column, for example 'Column B', would have a NESTED IF Function.
3. Which would output a logical response, "A, B, C, D, E, F etc...", depending on what is written in Column A.
If 'Column A' - 4" Square, Then 'Column B' - A
If 'Column A' - 5" Square, Then 'Column B' - B
& So on...
But the NESTED IF Function should only put a logical response if there is certain values within the cell, for example:
User types a value into 'Column A' which contain - 4 & S, Then 'Column B' - A
User types a value into 'Column B' which contain - 5 & S, Then 'Column B' - B
& So on...
Currently to do the above function, I have utilised the following Excel NESTED IF Function:
[Code] .....
& The following happens:
1. User inputs data into 'Column A'
2. The NESTED IF Function then provides an automatic response.
3. However it relies on the data being inputted without the ' " (Quotation Symbol)'
4. & With me defining the exact phrase that should be typed into the cell, for example, "4" Square"
Other: I have attached an example worksheet of the NESTED IF Function in practice, with two tables. One showing what is happening with the code above and one table showing what I would like to happen but with no function.
Example - IF Function.xlsx
I am trying to use an IF statment to look at 2 values, 1 from a defined range and the second based on offsetting the the first to Format a number of cells with a worksheet. Affectivley if the First Value is "E" and the value two columns to the left is a Sat or Sun I wish to format the row slightly differently from if it is a weekday. (There will be an M and a L as well)
View 5 Replies View RelatedI have a workbook with 17 sheets, is there a easy way to get all 17 sheets combined into one sheet?
View 9 Replies View RelatedI have a formula that uses the max function/formula (I am not sure of the terminology) to summarise the maximum value contained within a cumulative list of monthly expenditure in cells F12 to F60 (i.e MAX(Cashflow!F12:F60)) of a very old sheet I am working on, I was wondering if it was possible to have a cell that displays the profiled expenditure which is displayed in column E adjacent to the cell containing the maximum expenditure.
I have tried using the vlookup formula however combing formulas!
I have a nested if statement that doesn't give a blank cell when it is evaluated. The cell is general formatted but results in a '0' in the cell instead of a completely blank cell.
If statement is:
=IF('Sales info'!B16="",'Sales info'!B6,IF('Sales info'!B6="","",'Sales info'!B16))
Why is this giving me a 0?
Sample Excel with Frequency.xls.Attached a sample sheet with some data. What I'm trying to do is combine the frequency function and add another variable. Not sure how to do this. I'm using Excel 2003, so I don't think I can use "countifs".
View 2 Replies View RelatedI am having a list consisting of two columns. Column A describes a "product" and the currency directly below. In column B i have the quantity of the product and below the value. Now i have products in USD and EUR and would like to only sum up the quantity of all products which are in USD. A simple example is attached and i calculated the target valua manually. The values i would like to sum are market in red.
View 1 Replies View Relatedi would to combined these together
can this be done
I have hundreds of numbers in column A and I want to combined these numbers in call B1 with “ , ”
e.g.
column "A"
451
45
61
48
194
Call "B1"
451,45,61,48,194
I am using attached sheet for this thing but I can’t use any other new sheet, is there any another way to do this. I need formula. So I can use any sheets.
I have a Yes/No list that I use in two cells for data validation:
Cell A1 has the Yes/No list for data validation.
Cell A10 has the Yes/No list for data validation.
I want A10 to become No if the user selects "No" in the A1 pull-down list.
I am trying to combine 2 dates into the 1 cell separated by the word "TO:" So I have: =B2&" TO: "&C2
Which results in: 40211 TO: 40240
What I need is: 02/02/10 TO: 03/03/10
i'm trying to perform an operation that gets the standard deviation of all open status. See my formula.
=SUMPRODUCT(($D$4:$D$1591="open")*1,($H$4:$H$1591)*1,(STDEVA($H$4:$H$1591)))
I am trying to write a formula using IF, OR & AND combined together, but I can't see to get my formula in the correct order. I have tried moving several sections around but I still keep getting an error.
IF(OR((A2="1A",A2="2A",A3="3A",AND(IF(OR(B2="Q4 2013",B2="Q1 2014"),"Y","N")
The goal is to count up the number of rows in a database that have both properties:
1.) empty cell in Column B
2.) "XYZ" found somewhere in column D
I have a sumproduct function picking up data from a different worksheet. Because i have to much data it takes too much memory and it doesnt run that smoothly. Therefore i have hardcoded the function and tried to evaluate it using the EVAL() function from the morefunc add-in. However i don't get it to work. It continuously returns #VALUE.
This is the code i am trying to evaluate
SUMPRODUCT(--('Retrieve Depletions'!$A$4:$A$5000=$D4),--('Retrieve Depletions'!$B$4:$B$5000=$E4),--('Retrieve Depletions'!$C$4:$C$5000=$F4),--('Retrieve Depletions'!$D$4:$D$5000=$G4),--('Retrieve Depletions'!$E$4:$E$5000=$I4),--('Retrieve Depletions'!$F$4:$F$5000=$J4),'Retrieve Depletions'!H$4:H$5000)
I am attempting to create a vlookup formula that will count or sum a series of data so that I can pull it over into a summary sheet on a report. The vlookup formula that I am using is
=IF(ISNA(VLOOKUP($A34,'Jan 14'!$N$2:$AF$36,12,FALSE)),0,VLOOKUP($A34,'Jan 14'!$N$2:$AF$36,12,FALSE))
It seems to be working I just cant figure out how to incorporate the count or sum function into it where I need it.
Test Sample File.xlsx
I have attached a sample of the file I am working with.
I have two columns of data that I need to use SUMPRODUCT on. However, in one of the columns, there might be text after the number. The text can be several different characters. I only want to use the numbers, never the text. Also, there are usually blank cells within Column B and at the bottoms of both columns because this formula is going into a template for future worksheets that all have differing numbers of rows.
Example:
14T
16
40
20
150
97L
67
13
12
For the above example, I want the result to be 9879 (14*16 + 40*0 + 20*150 + 97*67 + 13*12 + 0*0 + 0*0 = 9879).
I've tried using the LEFT function to only get the numbers before any text, but I can't make it work with the blank cells at the bottoms of the columns.