I am trying to use an IF statment to look at 2 values, 1 from a defined range and the second based on offsetting the the first to Format a number of cells with a worksheet. Affectivley if the First Value is "E" and the value two columns to the left is a Sat or Sun I wish to format the row slightly differently from if it is a weekday. (There will be an M and a L as well)
View 5 RepliesI have code where the user inputs a date, the macro finds this cell and sets rngFound as the location of that cell. The macro then creates a new workbook with new worksheet. Using rngFound as a reference, I need to sum the cells one below and five to the right and put this sum into a cell on the new worksheet.
I did a little research and found the offset which takes care of the referencing, but I cannot figure out how to incorporate this into a sum function in vba.
Below is my attempt. Previous to this part of the code, I am active in the newly created worksheet so I am attempting to input a formula based on offsetting the found range. Another problem is that I am going to have to repeat this step for 50 rows going down. Is there a way to set a loop? Or would I have to write out this code, changing the ranges and offsets 50 times?
Code:
Range("D2").Select
ActiveCell.Formula = Sum[(OrigWks.Range(rngfound.Offset(1,0))):(OrigWks.Range(rngfound.offset(1,4)))]
how to code to specify a cell in which to enter data into a spreadhseet, when the heading contains only one row.
In the attached example the headings contain multiple rows with merged cells, is there any way of overcoming this so that the entries are placed in the correct cells?
I'm working in Excel 2010. I'm trying to create a dynamic range, using the OFFSET function. I've got it working beautifully but as soon as I save it and close the Name Manager the range stops working. When I go back into Name Manager I find all the cell references have changed (from C1:C600 to C1048572:C595 - or some other strange range).
P.S. What it's doing isn't so important as when the cell references are right it works. But just for full info: It's an OFFSET function, starting at A1. It will look at a list of companies and use a Match function to find out how many rows to offset (based on where the first instance of a particular company. And it uses the COUNTIF to make the range the same number of rows as there are entries for that company.
Here is my broken function:
=OFFSET('Map Point'!A1048572,MATCH("Company Name",'Sheet Name'!C1048572:C595)-COUNTIF('Sheet Name'!C1048572:C595,"Company Name"),0,COUNTIF('Sheet Name'!C1048572:C595,"Company Name"))
the actual output of the error message when I run my macro.
To repeat it, it says, "Regression - Having trouble offsetting input/output references"
The two button choices that appear on the bottom are "OK" or "Help." The OK button allows the macro to keep running (until it finds that it cannot find the regression output that was supposed to be created.
I have two lists ("fulllist" & "code" - A1:A20 is a data validated dropdown list of "fulllist". I want B2:B20 to return a list item offset one column to the item selected in A1:20
So, if A:1 drop down equals "asphalt paving" I want B:2 to insert a code from a list on cell right of asphalt paving.
Something like =IF(B31<>"fulllist",=OFFSET("fulllist",0,1,,),"") This returns an error. I have a feeling I need to use match. I can't seem to find an answer to this and I bet it is fairly simple.
It is suppose to be that if the employee is "FT" and has worked >=4 years the return is 15. But if the employee is FT and has worked 2 years but less than 4 years then it is suppose to return 10 (these are days off) Or if the employee is FT and has worked 1 year, but less than 2 then it should return 5 days off. And all the others in the column get no days off.
I have tried to do it with structured references and with cell references I get a column of zeros!
I am having some difficulties using a combination of IF and the OFFSET function to display a range of cell values from another column based on a simple condition. The values I need to display at the destination cells should be offset by 8 columns to the right and "X" rows down from the reference column. The value "X" is to be determined via the IF function to check for the row index number.
For example, if Index value "X" = 8, then display the value of B2 in cell I9. IF X = "9", display B2 in cell I10 etc.
I have attached a sample worksheet that provides some examples.
Ok ive been playing about with excel for the past week to get a spreadsheep up and running so i can see the totals of some things and now its getting a little complecated for me (ive done the easy stuff lol)
Ok here is the situation and i'll try and explain what im doing as best as i can. Im trying to make a spreadsheet that shows how much a resorce can be refined so lets say in a1 to c1 i have 400 in each but i can mix a with b and b with c at the ratio of every 20 of a and c to ever 10 of b
so somewhere in my spread sheet id have the result 20 and 20 as products ato c can make 20 of product d and e i hope that makes sence?
for every 20 + 10 of a(400)+b(400) = 20
and for every 20 + 10 of c(400)+b(400) = 20
so if i had 600 300 600 instead of 400 i can only make 30 of product d of e (id have to choose)
I need to format the background color of a row using an if statement or something similar. If have a certain cell has a specific value I want the entire row that the cell is on to have a specific background color.
View 9 Replies View RelatedHow can I write the equivelant of an if(and( statment in VB? What I would imaging it would look like is this...
If _________ = true
AndIf ________ = true Then
____________
End if
It seems like this should be simple, but after searching, and searching the help files, the internet, and this website, I am no closer to figuring this out.
I have another question with my red sox scores excel sheet. On my overview I want to be able to select any team, and view the indiviual stats against them. For the life of me I dont' know/can't find how to even do a simple yes no if statment to what the value in the drop down menu box is.
View 3 Replies View RelatedI don't even know if using the IF statement is the right function, but anyway. I am using VLOOKUP to complete a supply list, but of course if the supply name isn't on the first spreadsheet then the result is NA. Instead I want it to return 0.
View 3 Replies View RelatedI would like to check whether 2 conditions are satisfy in an if statement. One condition is of data type text and it is stored in a variable calls search1 whereas the other condition is of data type date and i intend to store into a variable calls search2. Could someone tell how to put search 2 into the below code. Basically, i want it to be like
if Cell A is equal to search1 and CellB is equal to search2 then
return value that is associated with the search in cell c
ActiveSheet.Cells(r, 13).FormulaArray = "=MIN(IF(Sheet1!$A$1:$A$20=""" & search1& """,Sheet1!$C$1:$C$20))"
why the code below is very slow with the extra if statment in it (marked with **) i have googled around and found that my for staments are correct i have tried screen updating etc. i have added a timer to see what diffrence it makes, what i have is 3 sheets 1st has about 100 rows with a number and time same as second but that only has 2 rows of the same the 3rd sheet has about 100 rows of just a number what the code does is loop through the 3rd sheet (build list) when it finds a number it looks on the first sheet to find the same number then gets the data in the second coloum and so on until it reaches a cell that says stop.
i have added a button to start this process, with the ** line in it takes 311 seconds with out it it takes 0.17 seconds
I have a list of codes. Some of them may be duplicated. I want to use the conditional formatting and the IF statement to highlight in a particular colour any codes that have appear twice or more. I used to know how to do this but now I cannot get it right.
View 2 Replies View RelatedI have been trying to get a formatting programme to work for well over a week and no matter what I try I seem destined to fail. I am trying to use an IF statement in VBA to format a cell if the result of the IF is true. The values in the cells being formatted have been generated from a VLOOKUP statment (looking at a table on another sheet of the workbook). I have tried to use conditional formatting but cannot get past the limit of 3 conditions.
Note in the code below I have values that may appear the same but to make them unique they have a single (or double) space before and after the character. Not sure if the code I have below is workable, if anyone has a better idea please let me know (its a little long winded). I am currently self learning VBA (through forums and the like) and below is the best I have come up with... however when I try to run it I only get a Run-time error 1004, application-defined or object defined error.
I would like for the If statment to hide multiple labels and buttons. How can I add more than one condition after Else:?
View 3 Replies View RelatedI have a number of statements within the Sheet Event Code (Excel 2007). Three times lately I have added a column and had to go back into the code and find all of the references that needed changing to reflect the new column.
I have been working on this for a couple of days and even tried EE, but to no success.
I have read that Defined Names / Constants should be used as often as possible, but even trying that, the VBA code errors out or "hangs up". Even within Bill Jalen's book (VBA and Macros 2007), there is nothing that addresses this, especially using Intersect.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rng As Range
On Error GoTo mEnd
Set rng = Sheets("Log").[F14:F10000]
If Not Intersect(rng, Target) Is Nothing Then
If Target = "" Then
With Sheets("Log")
If you look in the file you will see a records sheets and a form sheet. I want to see if a record has been broken. All the times are in seconds and the distances are in centimeters. How can I find a certain row, compare and act based on an if statment?
View 2 Replies View RelatedI set up formulas to count text characters in a range of cells. I'm tracking attendance and payments for a small yoga studio.
All I need to do is count "Y"s for prepaid attendance and "DI"s for drop-ins. I have the formulas working but they are absolute so inserting a row will break my sheet.
=COUNTIF(E14:Z14,"*Y*")
=COUNTIF(E11:Z11,"*DI*")
I have attached the .xls file.
The basic setup is as follows:
(1) the user inputs a number into cells B2:B6 (arbitrarily shown as 3,4,3 and 2)
(2) the user then inputs a series of values into the respective columns E, G, I or K (corresponding to examples A-D, respectively) with SPACING between each value corresponding to the value entered in B2:B6.
For example, the value "4" is chosen in B3, so values are entered in column G at time = 0,4,8,12,16,20....etc
As another example, the value "3" is chosen in B4, so values are entered into column I at time = 8,11,14,17,20,23...etc, ie. the starting point is not necessarily t = 0.
(3) once the values have been entered as described in point (2) above, a series of results are automatically calculated in columns F,H,J and L.
NOTE: I have omitted the formulae for the calculation and have just entered arbitrary (color coded for clarity only-i don't need color coding!) numbers alongside each inputted value for the 4 examples A-D.
OK, so what I want to extract from the table for each example is the paired time AND result values, and then show them in a new table.
I have used an OFFSET formula (originally suggested by "daddylonglegs") to do this, and the results i GET are shown in columns O-V.
HOWEVER, what i WANT is the output as shown in columns Y-AF.
So as you will notice, there are 2 problems:
(1) Example C in columns S/T: value in cell B4 = 3, but the first value entered in column I does not start at a multiple of 3, so no values are returned in columns S/T because the offset function only uses row 6 as a reference point. What i want is the result shown in columns AC/AD.
How do i write a formula which says, "look down a column, find the first cell that has a value in it, and then offset from that cell/row" ?
(2) Example D in columns U/V: since the first input in column K starts a t = 12 (ie, cell K18), then i have 5 rows of empty space in columns U/V. What i want is the result shown in columns AE/AF.
Lastly, i should add that i am not necessarily stuck on using OFFSET function, since i keep reading that it is quite volatile.
I am using the dsum formula to sum some values...the formula in B2 is:
=DSUM(BaseSistemasFebrero,"vlfinf",OFFSET('Planes Entidades'!B$1,0,0,COUNTA('Planes Entidades'!B$1:B$49),1))
The Planes Entidades sheet the data is layed out like this: ....
I'm trying to do a formula that references a cell and returns a different result dependant on the number in the cell being referenced.
For example I've said if A1 has a 3 in it then put the word TEST as the result, plus if it has a 4 put the word RESULT.
What I wrote as my formula is as follows-
=IF(A1=3,"TEST")+IF(A1=4,"RESULT")
It works fine when I only use one result but goes wrong when I add two. If I change the words I want to show to numbers it comes up fine but with words it just returns a Value error.
I have 2 inventory reports: what my store has and what my supplier has. I need to copy Tab1:K# to Tab2:T# provided that Tab1:A#'s contents match Tab2:A#'s contents. The A column represents the SKU of the item, but there is a difference in the amount of SKU's in each (my store sells ~6,000 items, supplier has ~10,000 items), so it's not as simple as sort by column A and copy pasting column K to column T.
For instance:
On Tab 1, A2's value is [1], K2's value is [9.38].
On Tab 2, A70's value is [1], K70's value is blank, but I need it to be [9.38], to match Tab 1's respective SKU.
I almost thought I had it figured out with VLOOKUP, but I cant seem to get it right... It doesn't reference the correct number.
Screenshots for reference
First tab, from the wholesaler: [URL]
Second tab, store's stock: [URL]
Assume I have a cell M24 with a formula like
=M10 + $H24 - $I24*0.35
As you can see B10 is a fix reference (due to omitted $) which should NOT be auto-adjusted but be kept.
Now I want to copy the formular to lots of cells below cell M24. therefore I mark cell M24 and click copy in context menu.
Then I drag/expand the blinking cell border to lets say the 20 cells below. As I result I expect e.g. in cell M25 a formula like
=M10 + $H25 - $I25*0.35
Unfortunately I got
=M11 + $H25 - $I25*0.35
So the fix reference is adjusted as well.
How can I tell Excel 2007 to NOT auto-adjust fix references in formulas?
I'm using Excel 2003 and I'm trying to make my LINEST function and the source cells for a scatter graph use the cell range specified in another cell in the document. I figured out that it was simple to do the following:
I250 contains: 10, shows: 10
I251 contains: ="I"&I250, shows I10
But I can't figure out how to do this in a larger function. I've tried a few things but none of them work. Here is an example where I want it to do a LINEST with y values in cells Ja - Jb and x values in cells Ia - Ib (where a and b are integers specified in cells I250 and J250 respectively):
Below is my code which isn't formatting the cells it's suppossed to. It looks like it isn't doing anything. I think the issue might be with the highlighted section of my code, but when I go to "Manage" my rules for conditional formatting, excel references the appropriate cell under the "Applies to" section. I am using relative cell references for for the majority of the rest of the code and this section follows a section that selects the correct cell for this conditional format.
Code:
Selection.FormatConditions.Add Type:=xlExpression, Formula1:="=""ABS()>.005"""
Selection.FormatConditions(Selection.FormatConditions.Count).SetFirstPriority[code].....
- Find a value on a sheet “ORM” in Column G5:G33
-Get the corresponding value of B5:B33 of that cell
-Place that corresponding value in a canned remark: “You have the number 2 in Block, 12, 14, 25 22.
-Place this canned remark in TextBox31
if Cell A1 is NOT blank then
If cell b1 is blank then show I in cell c1
If cell b1 has a date (any date) then show C in cell c1
If cell b1 says "ongoing" then show O in cell c1
If cell A1 IS blank then c1 should show nothing.