I have several phone numbers that I copy and paste from the web:
I.E:
(888) 456-7890
(333) 234-5678
I need to switch all of them to just standard numbers: They should look like this:
8884567890
3332345678
I go to "format" - "cells" - "numbers" but nothing works. I wonder if any formula can do it. It should work for ALL THE LIST, I want something else than change them one by one by hand.
I have a first & last name with a number in cell B2 which looks like the following;
939 Smith, Silvia
I would like to drop the numbers and just return 'Silvia Smith'.
I have the following part of the formula to drop the number and it works. =RIGHT(B2,LEN(B2)-FIND(" ",B2)) Need to know how to layer in the other part of the formula to switch first and last name.
I want to switch on Caps & Number lock on opening an Excel document. I'm using the following code;
View 10 Replies View RelatedI have created a very long switch statement, which is too long to be placed in one row in VBA. I have attempted to put a space and underscore at the end of one line and continue the statement on the row below by placing a comma at the start of the second line. VBA will accept my efforts, but when I run the statement in the immediate window, the following error appears.
"Invalid procedure call or argument"
I understand that there are certain rules where I can split a switch statement onto two lines, yet I do not know what they may be.
One of the reports I run provides me information on lengths of time. Such a field displays as |0:09:16| indicating 9 minutes and 16 seconds. However, when the report generates the excel spreadsheet it saves these cells in date/time format ([h]:mm:ss). If I were to convert this field to the number format (so I can manipulate and graph it) it displays as such |0.00643460648148148| Ideally I would be able to have the data in the field stored as |556| (556 seconds, or 9 minutes 16 seconds). I have thousands of fields that I need to manipulate where the data is stored in this format and I can not figure out how to fix it.
View 5 Replies View RelatedI have an Excel 2010 spreadsheet where the default number format keeps switching to the date format. I keep switching it back and it'll stay as a number format for a time, but then it'll switch back. This is also the case for any new worksheets in that one spreadsheet.
This only happens with this one file - everything else behaves according to my regional settings or to how the file had been previously formatted.
In order to export an excel table into another program I first need to save the excel file as .txt. The .txt file can then be imported by the other program.
First I however need to make excel understand that the value should be a text and not a value. I therefore format the number as text (0000150235) by adding "0000150235". After saving the file as .txt the format changes from "0000150235" to """0000150235""". I do however need the format in the .txt file to be "0000150235". Can anyone tell me how I can save "0000150235" as .txt and get the value "0000150235" in the .txt file.
How do I convert 11.20.00 in A1 to 11:20:00 in B1?
I've tried =TEXT(A1,"hh:mm:ss") to no avail.
I want to convert number format to text format, any formula ?
View 6 Replies View RelatedI'll get straight to the point: How can I change this text format from 474556788 to 0-47455678-8 (dash added after 0 and before the last number). I need to apply this to around 5000 rows (can't do that manualy). I want it to be int his format:
474556788 to 047-455678-8
Tks Auto Merged Post;474556788 to 047-455678-8 (This is the wanted format)
I have a problem that when I try to convert text to number and format the number without 2 decimal places as seen on the link I have given below, Instead of 1607.947, I get 1607947. I have Excel 2010 loaded. The details are in below picture.
[URL]
i am looking for excel custom number format for 0 (zero) number that make center alignment..
for example ;
sample (when type 0 (zero) number)
after custom number format
- (right alignment)
- (center alignment)
how make center alignment with custom number format for 0 (zero) number..
I received a request from a coworker regarding custom formatting some numbers in his spreadsheet. Those numbers are serial numbers of 20 characters long. Sometimes in my files I use this custom number formatting ###0 and its enough for the data I handle. But when I tried to use it in his spreadsheet, the following shows:
8456891070060510000
The cell must look like this: 08456891070060510302
The reason to have it like this is due to a Delivery Program requirement to deliver Set-top Units for repair. The Delivery Program do not recognize other format than the above. My coworker takes the data from a spreadsheet, and the spreadsheet needs a custom number format to display the correct number.
find a custom number format to be able to display as my coworker need it??
Text to Number or General.xlsx
The included, small database is formatted as text. It is a text feed from an outside source. I simply want to format the cells into either numbers or general format but not text... seems simple, and it should be, but the only way I can get this done is to go to each cell and access the formula bar and re-enter the number by pressing Enter.
I used to get data from a database (CorVu & MIMS) in this format "0122458/001". Due to changes in those Databases I now get the data as 2 columns " 0122458" and "1" .What I need to do is somehow get this back to the old format including the leading zeros.
View 8 Replies View RelatedI have a standard block of text with numbers in it pulled from various calculations in a financial model. I have done this through a formula
e.g. ="You gross profit percentage is " & D9 & "% and your gross profit is $" & D10 & "." Problem is i'd like to format the numbers that pull through so they are easier to read. At the moment in the above example D10 results in $-600000000. I'd like it to look like $(600,000,000).
how do you place 100/0 so the /0 stays static and the 100 can be used to operate? (ie: 100/00, 101/00, etc)
View 5 Replies View RelatedI have data in cell A1 that often changes its number format(from $ to %), can i have the number format change in cell B1 whenever the number format in cell A1 changes?
View 3 Replies View RelatedIn Excel 2003, I have a series of complex(ish) lookups which populate cells in Sheet 1 from other sheets in the same workbook. Some of these cells are %ges some are not, I need to display the resultant sheet values as %ges or not based on if the cell to the left (also populated by a complex(ish) lookup) contains the character "%".
I cannot just format the cell on its own, as the list in itself is volatile and can change according to the complex(ish) lookup,
The main problem with this is I need the result to be a numeric value and NOT text in ALL cases as further calculations will be undertaken on them.
In simple if it is a %ge I need to see the %ge and use it as a %ge or if it is just a number see it as a number and use it as a number.
e.g
A B Result Req
Satisfaction with telephone access (%) 0.900032390.0%
Ability to see boss within 48 hours () 0.889 0.889
I need an excel file to do this:
i have one column like this:
492
500
773
738
572
492 When I repeat this number I need that the first (492) be formatted with a color and continuous like this
200
572 format the first 572
492 format the next 492 but the actual number stays without formatting!
I have a user form that has several tab pages on it when the form opens it checks to see if the user has entered there default info if it is empty it needs to go to the default tab so the user can enter there info. How do I do this using vba in excel 2000 I have not been able to find any code that will do this if I use the set focus option for a text box on the tab page it comes up with an error saying the item is not visible! The user forme is names = UserDataInputForm. The tab pages I have are
1st = InputDailyTimesPage
2nd = OverTimePage
3rd = DataPage
4th = DefultDataPage
the form opens using the 1st tab page by default
in the user forms inisilisation code I have this check
I have created a database of names & addresses from a software program called "CLIP" into excel, which in turn will become a label mail merge in MS word consisting of 900-1000 customers (for a mass mailing).
The problem is, the names were created last, first and I would like to change them to first last. Is there a way to do that without manually typing them all in again?
The names are in one column, so I cannot just switch the columns around.
I try to code some vba here's my example
1 A B C D
2 3 5 1 2
3 1 2 0 1
4 1 3 0 1
5 1 0 0 0
I want to sum in line 2 all values below but i dont know how to switch to next collum in vba
have been using the simple formula below to determine between a friend and myself whos turn it is next.
=IF(Q22
The setup here is I have multiple codes for a product. Coding structure is as follows (options are contained in parantheses):
N -(T,P) - (5L,6,7,8) - (DFL,DJL,DBL,UEDF) - P - (1,6,9,16,19,1H,1H9) - (g,s,blank) - (a,blank)
Clearly, there are a ton of options. What I'm doing is screening those codes and breaking them down into their component parts.
ex) NT6UEDFP1a: N - T - 6 - UEDF - P - 1 - a
ex) NT6DFLP16: N - T - 6 - DFL - P - 16
I'm trying to do multiple if/then scenarios for each option. However, the way I have it now, I'm getting a FALSE when I switch between these two examples (the dfl works, the uedfp generates false). (there are other codes which is why the first line is there. I'm just having trouble with this particular "nt/np" group)
=IF(OR(LEFT($A$14,2)="np",LEFT($A$14,2)="nt"),
IF(OR(MID($A$14,4,3)="dfl",MID($A$14,4,3)="dbl",MID($A$14,4,3)="djl"),[code].....
I have made a little program for a customer at work which has 4 different worksheets.
Each worksheet works out a cost based on different prices.
I would like to make a 'Welcome' worksheet, with buttons on it so my customer can click the button which corresponds to the option he would like to cost, and then excel automatically selects that worksheet.
how to create buttons but don't know the code to but behind it. It would be nice to also hide the other 3 worksheets when they have not been selected by the welcome page.
Is there a way to use a switch statement with a default value, for when none of the expressions evaluate to TRUE?
View 5 Replies View RelatedI have written VBA code to open a separate file and then copy back and forth between the two files. However, when I recorded, I got commands like the following:
Windows("DestinationFile.XLS").Activate
then the copy/paste stuff then
Windows("SourceFile.XLS").Activate
The problem is that my "SourceFile" may have a different filename. I need the code to be robust enough to handle the possibility of a different filename. I tried the following, but it did not work:
Dim MarketProfileName As String
MarketProfileName = ThisWorkbook.FullName
Windows("DestinationFile.XLS").Activate
then the copy/paste stuff then
Windows(MarketProfileName).Activate
Im having trouble switching between windows that are open in separate instances of excel.
I used to be able to switch easily between these workbooks when they were both being being run in the same instance of excel.
But since having to change it so the workbooks are opened in seperate instances, i cannot get it to work, the code just fails when it trys to activate the first window.
I currently have the below code:
Code:
Sub CloseAndSave()
Application.EnableEvents = True
'//Activate InfoHub workbook and put a tick in the checkbox.
Workbooks("403 InfoHub.xls").Activate
Sheets("HOME PAGE").ToggleButton1.Value = True
[Code]..
Is there anyway to do this?
I am trying to set up a budget spreadsheet for a friend. The sheet will have the usual incoming and outgoings with a surplus at the end of each month. This surplus needs to be accumulated each month in a particular Account (Cell).
Once the amount in this cell reaches £5000 any surplus accumulated each month from that point needs to be deposited in another account (Cell).
