How To Display Custom Tooltips On Data Points
Jun 6, 2014
I have a line chart (multiple series) in which I am trying to display custom tooltips on the data points. The source for these custom tooltips are the Notes columns in the first worksheet. The code (which I've copied from an internet site) is working to some degree but I'm not sure how to modify it to pick up the notes column as the content for the tooltips. Also, the example I took this from only had one line whereas I will have 5 when the chart is complete.
View 6 Replies
ADVERTISEMENT
Jan 7, 2008
[url] and after some experimentation i realised that it's not actually as easy as it first appears to show a tooltip window for each item of a DropDown as you hover over the items with the mouse.
even moving and toggling the visible Property at run time of a lbl and/or a textbox and use them to mimic a tooltip didn't help as the latters get overlapped by the dropdown.
Maybe i am just complicating things and am missing an easier solution/workaround !
Anyway here is a workbook example : [url]
and here is the code for future reference:
This Code goes in the UserForm Module:
Option Explicit
Private Sub UserForm_Initialize()
Dim i As Byte
'poulate cmb and assign it to a global var
With ComboBox1
For i = 1 To 12
.AddItem i
Next
.ListIndex = 0
End With
Set oCmb = Me.ComboBox1
Call CreateStaticCtl
Call SubClassStaticCtl
End Sub
View 9 Replies
View Related
Nov 8, 2006
I am having trouble assigning a tooltip to a button on a custom toolbar. I have found an example in the forum, but it dont seem to work for me.
Sub Toolbartext()
With Toolbars("Field Tracking Tools")
.ToolbarButtons(1). Name = "Displays Field Officer Data Entry Form"
End With
End Sub
View 2 Replies
View Related
Sep 21, 2011
I ran across a great article on performing Drive Time Calculations between two addresses. The only problem is that I can not seem to get it to work properly. Here is a link to the article cause I want full credit to be given to the person that created it.
[URL]
Here are the steps I have taken so far.
1. Downloaded Microsoft Internet Transfer Control reference (msinet.ocx) per [URL]
2. Registered the msinet.ocx
3. Selected Microsoft Internet Transfer Control as a Reference in Visual Basic.
4. Copied the custom function for DriveTime into a module.
5. Went to sheet that contained addresses (Column A contains PointA, Column B contains PointB)
6. In C2 I entered the formula =DriveTime(A2,B2)
7. After entering the formula I get a error (#VALUE)
View 9 Replies
View Related
Feb 24, 2014
I have four cells c1 thru c4. The SUM of these cells must equal 1. I want to display an error message "sum of cells not equal to 1.0" but only when data has been entered in all four cells.
For instance =SUM(C1:C4, "<>1") should display the error message. Is there a way to write the formula with an IF statement and still use data validation with error message box?
Assumptions:
-Will ignore blanks
-Error message "Sum of cells are not equal to 1.0" until values in all four cells have been entered, not after a value is entered in a cell. (validate expression after all four cells have values or blank)
Scenarios:
c1 = .25, c2 is blank, c3 = .25, c4 = .50 TRUE no error message should displays
c1 = .25, c2 = .25, c3 = .25, c4 = .50 TRUE no error message should displays
c1 = .25, c2 = .30, c3 = .25, c4 = .50 FALSE error message should display after value is entered in c4
etc
What I don't want is for the error message box to display after .25 is entered in c1 because the user is still in the process of adding values. Can this be done using Data Validation in Excel 2010?
View 2 Replies
View Related
Jul 3, 2013
I have a few cells that contain decimals that do not appear as decimals. If the number is 50.1, it only shows up as 50 in the cell. I've tried formatting it to a number with 2 decimal places and to scientific and when I do that the number displays as ##. When I do general formatting it only appears as 50.
I used a formula to pull the number into a different cell, however, and in that cell it shows up as 50.1.
Is there anything I can do to make it show up as 50.1 in the original cell?
View 2 Replies
View Related
Jul 8, 2009
Is there a way to have a tooltip for each individual item in a listbox. I know how to have a tooltip for the overall list box object, but not for the individual line items.
View 9 Replies
View Related
Aug 5, 2008
In XL 2003, the w/b displays correctly the custom CommandBar on the w/s and it works fine.
The name of the CommandBar appears (and is checked) in the drop-down list if I right-click on the toolbar (list showing Standard, Formatting, Borders, Chart, ...., Customize).
In XL 2007, the w/b opens fine, but I couldn't get the custom CommandBar to display !!
I used F8 to step into the macro that creates the CommandBar. No errors, but still no display!
View 9 Replies
View Related
Feb 15, 2014
I'm trying to make a converter between about 8 various types of values. These are not units like Km or miles or something like that, but rather numbers that represent a specific "hardness value" on a variety of scales (to name a few: HRC, HRA, K)
What I've been doing so far is plotting the two types against eachother and then getting the best trendline I can so that I can use that formula to convert between the two with relative certainty. (for example, when plotting HV vs HRC my fourth order polynomial trendline with an Rsquared of 1 is y=0.0001x4 - 0.0188x3 + 1.0768x2 - 20.709x + 350.69)
My questions comes up where I was hoping to make a window or box of some sort allowing the user to input a numeric value, then selecting the Input units and the hopeful output calculated units, and have the box spit back to the user the conversion.
View 9 Replies
View Related
Aug 31, 2006
I have a userform with a combobox (cmbSearch) , a textbox (textbox1) and a listbox (listbox1)....and a commandbutton (cmbFind). This userform is used for searching records in my worksheet....where user selects a "Search By" category from the combobox and then enters relevent text search criteria in the textbox....and all the search results are shown in the listbox. This part works fine untill someone tries to search a "non-existent" record. e.g. a customer name thats not in the database and it gives an error. I would incorporate in my code to have a Message box pop up on these type of searches saying "textbox1.value Not Found!" insetad of error message.
Private Sub cmbFind_Click()
Set c = Range("a65536").End(xlUp).Offset(1, 0)
'write userform entries to database
Dim DataSH As Worksheet
Set DataSH = Sheets("ComplaintData")
With DataSH
.Range("L1").Value = cmbSearch.Value
.Range("L2").Value = TextBox1.Text
.Range("N1"). CurrentRegion.Clear
.Range("A1").CurrentRegion. AdvancedFilter Action:=xlFilterCopy, criteriarange:=.Range("L1:L2"), copytorange:=.Range("N1")
End With
lstSearch.RowSource = vbNullString
lstSearch.RowSource = "outdata"
End Sub
View 5 Replies
View Related
May 22, 2013
I can't figure out how to use the custom number formatting to get 20130522A to display as 2013 05 22A. I don't care if it has to be 2013 05 22 A, the extra space is fine.
I have been googling and trying different things and I cant get anything to work. All of the characters can be text, there will always be 4 characters, a space, 2 characters, a space, and the remaining 3 characters. It seems as though it should be so simple to add two spaces into a fixed length string, but I guess not.
View 8 Replies
View Related
Jul 2, 2014
I am formatting total dollars to millions using the custom format $0.0,,
It displays negative values such as $3,100,000 to -$3.1
How do I get the negative values to display in parenthesis such as $(3.1)
View 3 Replies
View Related
Feb 17, 2012
I have a range of cells with numeric values or blanks. I set up a Conditional Formatting rule with this range selected: New Rule > Format only cells that contain > Format only cells with: Blanks; then I set the formatting to a light green fill and on the Number tab > Category = Custom > Type: "blank"
The blank fields get the light green fill, but no text; that is, the value displayed is still blank.
I go back to edit the CF rule and change Blanks to No Blanks. The results are what I expect: the cells with numbers display the text blank and have a green fill; the blank cells have no fill (white).
This is my testing criteria. I eventually want the empty cells to display 0 (zero). I tried setting Custom > Type: 0 (the number placeholder zero) and Type: "0" (literally the number zero), and neither works.
I have tried this with Format only cells with Cell Value equal to [the address of a blank cell].
I tried to set the value as "" but kept getting =""""; and ="" became ="=""" ???
I have tried this with Use a Formula... using the len()=0, isblank(), and other approaches, all with the same results.
I also made sure the option [x] Show a zero in cells that have a zero value is checked.
With all approaches to identifying the blank cells, they ARE obviously being recognized as blank values: the fill color is being applied to the right cells; and when Not Blank is the criterion (or a negation of a formula), the blank ones are not formatted. But blank cells will not display the text as defined in the Custom Formatting.
And this isn't an issue of "If the cell displays 'blank' it's no longer blank, so the rule doesn't apply" - HERE'S WHY: I set up a second CF rule that sets the Font to red when the value is greater than zero and had this CF rule follow the CF rule for No Blanks (the test above that works). Cells with positive numbers displayed blank in red, cells with zeros or negative numbers displayed blank in black. This clarified that the actual value of the cell is being evaluated, not the displayed value after Custom formatting is applied.
View 2 Replies
View Related
May 2, 2007
Is there a way of amending the following line of code so that it selects multiple data points in a data series in a chart (e.g points 14,15,16)?
ActiveChart.SeriesCollection(2).Points(14).Select
View 2 Replies
View Related
Apr 14, 2008
I have a bar chart that was made from table 1 which has the value in it. I have another table, table 2 that has the name corresponding to the value in table 1. I want to color data points in a bar chart with a different color for each name I have in table 2. I also want to give a data label in the data points with the value I have in table 2 instead of the original data label from table 1. Is it possible to do it?
View 3 Replies
View Related
May 16, 2006
I have several files of data that are from a data logger. The data is broken up by day. Each day has roughly 43000 rows of data, at its sample rate. This has made charting the data a nuisance. Is there a way to resample the data so it fits in the 32000 points excel can chart? In the future I will set a sample rate that will keep the number of points below the 32K per series. I would like to be able to have the total number of points reduced by averaging the data not by simply deleting one of every four rows.
View 5 Replies
View Related
Jan 25, 2014
I have a data for sedimentation along a pipe. I measured sediment concentrations at different lengths of the pipe, after different intervals of time. So I have 35 concentration values, take at 5 different points along the pipe, at 7 different times. Is it possible to plot a chart with these 35 points, with depth on y-axis, time on x-axis? These 35 points are percent removals (0-100). .
View 4 Replies
View Related
Dec 14, 2008
What I have is a column (column A) that only has two data entries at any one time.
I need column B to fill in the trend of those two data points.
My problem is I don't know how to deal with the cells that say #N/A. Which is every cell other than the two cells with data.
If I replace the #N/As with say 1, then it messes up the trend data points.
It seems like I need to be using the trend command, but any solution would be welcome.
View 14 Replies
View Related
Jan 22, 2007
I'm running a query of 30 and 60 days worth of data but I don't want certain dates to be included in the queries. How do I exclude certain dates and at the same time pull in day 31 to include this in my 30 day high or average etc.?
For example:
1/19/2007 4.7
1/18/2007 4.5
1/17/2007 3.8
1/16/2007 4.9
1/15/2007 3.75
1/12/2007 3.75
I want to exclude 1/15 because it is a holiday and it just repeats the data from 1/12. So I want it to pull in the data for 1/12 if I were doing a 5 day query. As I said before I need to do a MAX, MIN, AVERAGE and STDEV of 30 and 60 days but my formulas are skewed because of the holidays.
View 9 Replies
View Related
Oct 11, 2007
I have a line chart that has 4 points. Is it possible to make the data points point to the next point? If so how can I do that?
View 9 Replies
View Related
Oct 12, 2009
I have created a series of charts in excel and the data sources for them are located on a hidden sheet. I need to keep all the charts active as I have set up macros that enable a viewer to automatically change the chart with a click of a button. However the data behind these charts is confidential and I cannot let the viewer have access to the individual data points.
My issue is that when you 'hover' your mouse over the lines on the charts, the various data points can be seen
Is there a way to make these data points hidden when you hover your mouse over the chart but at the same time keep the source data active behind the chart?
View 9 Replies
View Related
Sep 25, 2007
I need to map the names of the companies on the x axis (ANF, AEO, ARO, PSUN) and 5% to 30% on the y axis. Plotted for each company should be the min and max. So two points for each company. How can I plot this data. Underlying data as follows:
MINMAX
ANF18.6%19.8%
AEO7.8%21.0%
ARO6.2%9.0%
PSUN6.1%14.2%
View 3 Replies
View Related
Oct 25, 2013
I was creating a sales report: See below
Sales for Shook, Emily(131520) Total Sales $160.18
Sales for Clayton, Casandra(131008) Total Sales NO SALES FOR THE WEEK
Sales for Jofery, Rebecca(126310) Total SalesNO SALES FOR THE WEEK
Sales for Brea, Olga(124257) Total Sales$140.21
Sales for Mastro, Rachel(131521) Total SalesNO SALES FOR THE WEEK
Sales for Rodriguez, Blanca(111550) Total Sales $154.33
Sales for Katz, Mary Isabel(126840) Total Sales$269.87
Sales for Kitson, Mackenzie(130466) Total SalesNO SALES FOR THE WEEK
Sales for Blagniceanu, Adriana(126518) Total Sales$161.25
Sales for Best, Jessica(128350) Total SalesNO SALES FOR THE WEEK
Sales for Sanchez, Vanessa(126437) Total SalesNO SALES FOR THE WEEK
The Sales For (Last Name, First Name) was a concatenate I created to give everyone a unique identifier. Than I used a vlookup based on the the sales report to get there total sales
=IFERROR(VLOOKUP(D7,sales2,5,FALSE),"NO SALES FOR THE WEEK")
My problem is say for example: Sales for Sanchez, Vanessa shows up twice on the report stating she has total sales for $40 and $60 how can I get excel to calculate that within my VLOOKUP Function. If there a formula I can use to combine both values. I was think SUMIF is the most likely answer but I'm having problems.
View 2 Replies
View Related
May 11, 2007
How do i conditionally colour chart data points. This is an example of my data from which the chart is created from.
Salesman A 10
Salesman B 10
US Total 20
Salesman C 20
Salesman D 10
Philipines Total 30
When the chart is created, i would like the country total data points to be in orange while the rest of the data points should remain in white. I tried this code and it returned me an error.
ActiveChart.SeriesCollection("Average of Margin").Points("ID Total").Select
With Selection.Interior
.ColorIndex = 36
.Pattern = xlSolid
End With
I also tried the online F1 help it told me to use Points(Index). However i do not want to refer to the ponint with an index as the number of salesman or country could change. Therefore changing the index points.
View 4 Replies
View Related
Jun 12, 2014
Have Series 1 (to be a line chart) with 20 data points X values are 0 to 68. Have Series 2 (Bar chart) with 68 data points, again X values 0 to 68
Cant get series 1 to display beyond X value of 20
View 3 Replies
View Related
Nov 26, 2013
Attached is an excel file of my issue. I want to stretch the graph so it shows at least 3-4 months. at the moment is only shows 1 month.
Timeline format - Copy.xlsx
View 1 Replies
View Related
Dec 17, 2013
Is there any way I can use conditioning formatting on datapoints in a graph, so that if certain points meet the criteria they will appear with another symbol?
Suppose I would like to change symbol on the datapoints exceeding the value 200 in this graph: Graph.jpg
Can I do that?
View 3 Replies
View Related
Mar 2, 2009
I have a set of data. I know how to do linear regression over the whole set of data. How do I have another linear regression over the first 5 points in the set of data on the same graph ?? I am using Excel 2007
View 14 Replies
View Related
Feb 10, 2013
I have a set of data that represents points in a cycle. I would like a way to take a subsample of the data at discrete percentages (i.e., 0%, 5%, 10%......100%).
View 3 Replies
View Related
Jan 13, 2009
I have the following chart that displays average speed for my bike rides (Green line). The problem is that I don't want the line going to points with no value or zero value. So, the first month would just be the point then, when I enter in an avg speed in Feb then the line would connect to Feb. Is this possible?
View 9 Replies
View Related
