Offset Entire Row
Oct 9, 2008I have used the Selection x1Down code to select all rows to the next one with data in but now need some code to deselect the final row (I want to delete all of the blank rows above)
View 2 Replies
ADVERTISEMENT
Offset Function Not Capturing Entire Range
Feb 9, 2014My worksheet has 1096 rows of data including headers. I am trying to create dynamic named ranges using the OFFSET function but when I check to see if they are capturing the entire range I see they are not.
Here is my formula:
OFFSET(SiteTrac!$FA$1,0,0,COUNTA(SiteTrac!$FA:$FA),1)
OR
OFFSET(SiteTrac!$FA$1,0,0,COUNTA(SiteTrac!$FA:$FA)-1,1)
OR
OFFSET(SiteTrac!$FA$1,0,0,COUNTA(SiteTrac!$FA:$FA)-1)
OR
OFFSET(SiteTrac!$FA$1,0,0,COUNTA(SiteTrac!$FA:$FA))
I have tried all four but every time it continues to stop on row 409. I have tried to name different columns and they all stop short too.
Using OFFSET Function To Return The Value From Another Cell With Row And Column Offset
May 31, 2014I am having some difficulties using a combination of IF and the OFFSET function to display a range of cell values from another column based on a simple condition. The values I need to display at the destination cells should be offset by 8 columns to the right and "X" rows down from the reference column. The value "X" is to be determined via the IF function to check for the row index number.
For example, if Index value "X" = 8, then display the value of B2 in cell I9. IF X = "9", display B2 in cell I10 etc.
I have attached a sample worksheet that provides some examples.
Catch An Error And Reset The Entire Code To The Very Beginning And Skip That Entire Entry
Jun 5, 2008I want to catch an error and reset the entire code to the very beginning and skip that entire entry. When I use "Next fieldSheetName" I get "Next without For," error 1004. Searches tell me I have an open block somewhere, but that's not true. Removing that statement (and having the loop iterate as normal) has no error at all.
Dim employeeName As String
Dim fieldMax, x, y As Byte ' Counters mostly
Dim workedHours, fieldSheetName As Integer
fieldMax = 204 ' Row number to stop on in the field time sheet
row = 4 ' Row specification for field time sheet. Begin at row 4 to ignore headers
' and start on the first name. This should not be changed!
Col = 3 ' Start at column 3 then increase by one to start going to next time entry
' RESET HERE!
For fieldSheetName = 4 To fieldMax Step 8 ' This is our MAIN loop. It iterates from 0 to fieldMax, which is 204...........
Find Value, Offset & Return Offset To TextBox
Nov 1, 2006- Find a value on a sheet “ORM” in Column G5:G33
-Get the corresponding value of B5:B33 of that cell
-Place that corresponding value in a canned remark: “You have the number 2 in Block, 12, 14, 25 22.
-Place this canned remark in TextBox31
Autofill Entire Row With Data From Above Over Entire Spreadsheet
Jul 28, 2014I'm trying to autofill a series of rows (that are blank) with data from an above row. I want to autofill the row in its entirety, not just filling in blank cells.
For instance (assuming comma is a new column). Colors listed are just a data example. Space between commas indicates a blank cell:
142, RED, GREEN, , YELLOW, , BLACK, PURPLE
(blank row)
142, GREEN, RED, ,BLACK, , PINK, ,
(blank row)
(blank row)
(blank row)
154, YELLOW, BLACK, , GRAY, , PURPLE, RED
(blank row)
(blank row)
So rather than it just completing the task in one desired cell, it would complete the task over the entire spreadsheet. Data spread can be as far as row 500 and column BY, so you can see how a copy + paste or a drag would get monotonous.
Another small example data set:
1,1,1453,0,10,-35
(blank row)
(blank row)
0,0,1448,0, ,-35
(blank row)
1, ,1443,1,3,-36
1,2,1408,2,7, ,
(blank row)
(blank row)
(blank row)
1,2, ,2,7,-39
(blank row)
(blank row)
1,3,1344,1,10,31
And column A will always have data (unless the row is completely blank.
IF And OFFSET: How To OFFSET Only If Cell Has A Value In It
Oct 26, 2008I have attached the .xls file.
The basic setup is as follows:
(1) the user inputs a number into cells B2:B6 (arbitrarily shown as 3,4,3 and 2)
(2) the user then inputs a series of values into the respective columns E, G, I or K (corresponding to examples A-D, respectively) with SPACING between each value corresponding to the value entered in B2:B6.
For example, the value "4" is chosen in B3, so values are entered in column G at time = 0,4,8,12,16,20....etc
As another example, the value "3" is chosen in B4, so values are entered into column I at time = 8,11,14,17,20,23...etc, ie. the starting point is not necessarily t = 0.
(3) once the values have been entered as described in point (2) above, a series of results are automatically calculated in columns F,H,J and L.
NOTE: I have omitted the formulae for the calculation and have just entered arbitrary (color coded for clarity only-i don't need color coding!) numbers alongside each inputted value for the 4 examples A-D.
OK, so what I want to extract from the table for each example is the paired time AND result values, and then show them in a new table.
I have used an OFFSET formula (originally suggested by "daddylonglegs") to do this, and the results i GET are shown in columns O-V.
HOWEVER, what i WANT is the output as shown in columns Y-AF.
So as you will notice, there are 2 problems:
(1) Example C in columns S/T: value in cell B4 = 3, but the first value entered in column I does not start at a multiple of 3, so no values are returned in columns S/T because the offset function only uses row 6 as a reference point. What i want is the result shown in columns AC/AD.
How do i write a formula which says, "look down a column, find the first cell that has a value in it, and then offset from that cell/row" ?
(2) Example D in columns U/V: since the first input in column K starts a t = 12 (ie, cell K18), then i have 5 rows of empty space in columns U/V. What i want is the result shown in columns AE/AF.
Lastly, i should add that i am not necessarily stuck on using OFFSET function, since i keep reading that it is quite volatile.
VBA Search / Replace With Offset 1 Column And Offset 2 Column
Mar 22, 2013I am trying to work out how to nest offset in a code using search replace. The goal is to find a value from cell A1 (example) and replace the values in the cells next to the cell containing samuel and the cell containing samuel.
A sort of search and remove data tool if you like So for example:
[QUOTE]A1: "samuel" (the search criteria)
Search range is: B1:D400
(for example)
Cell B40 = samuel
C40 = Driver
D40 = year
So, the macro is activated and finds "samuel" in B40 and I would like C40 & D40 replaced with "" The code I'm using is below: (this is just replacing the cell containing the search criteria with "test". I would like to nest offset(0,2) & offset(0,3).Value = ""
Sub Macro1()
Range("B1:D400").Select
Selection.Replace What:=Sheets("Sheet1").Range("A1").Value, Replacement:="test", LookAt:=xlPart, _
SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _
ReplaceFormat:=False
End Sub
Using Offset
Feb 11, 2009Using Offset
My
Offset
Apr 1, 2007Private Sub OptionButton1_Click()
Set primary = Worksheets("Monitor Testing").Cells(20, 4)
For Counter = 1 To 3
If primary.Offset(0, 4)
Sum YTD Using VLookup And Offset
Oct 26, 2012Any way I could SUM a YTD using VLOOKUP and OFFSET? In another worksheet, I need to reference Account Income #, go to the worksheet shown below, find the Account Income number, Offset and sum of the columns in that row to the YTD figure.
Attached is a sample : EXAMPLE.xlsx
Account
Income
9/30/2012
8/31/2012
7/31/2012
6/30/2012
5/31/2012
[Code] ......
EXAMPLE.xlsx
Offset/match
Mar 2, 2009I'm trying to lookup a string in a column from another sheet and than return the row on which that string was found. I have two files, one in which my OFFSET/MATCH worked and another in which they didn't work properly.
My problem is this: I have multiple instances of a string in a column and i want to get all the info on that string (the rest of the columns). Let me explain in examples.
In column A on Sheet 2 i have
4 2 4
2 3 4
5 3 2
2 2 2
4 1 3
I need to have in Sheet 1:
4 2 4
4 1 3
Where the first 4 (bolded) is the reference value.
In sheet 1 i have a column A2 which is the reference. In column B2 i have
=MATCH(A2;'Sheet 2'!A1:A16051;1) - this worked on a file but returned a bad value on the other (donno why)
In the second file i used =MATCH(A2;'Sheet 2'!A2:A10552;0)+1 which returned the good value.
For the second value (row 4 1 3) i used =IF(OFFSET('Sheet 2'!A1;B2-2;0)=A2;OFFSET(Sheet 2'!A1;B2-2;0);0). This worked well on the first file but didn't work on the second.
I got the commands above from someone that used to update this file so i don't know exactly how they work
Using IF And Offset Formula
Jun 7, 2009I am trying to create a formula to determine if my students made a point in high standers, which means if they got a level 3 and about in 2009 verse the student's 2008. Now if they stayed on the same level did they make learning gains. So what I need to do is look at the grade level of the student (Colum C), then 2009 Math Developmental Score (Colum J), and Finally 2008 Math Developmental Score (Colum M). So if the student scored a level 2 in 2008 and a level 3 in 2009 he gets a point, but if he stayed on the same level. The formula needs to look see if he made learning gains. So if the student is in grade 4 and was a level 3 in 2008 and 2009 he would need to score 163 points higher in order to get a point. I have created a helper table with the information need to calculate the information. I have been working on this for about a week I can’t seem to get it right.
View 3 Replies View RelatedUsing OFFSET Function
Dec 1, 2009In row E10:Z10 I have a series of values and in row E6:Z10 I have dates associated with each of the values in row 10.
I would like to create a formula to look in E10:Z10 for the maximum value and then return the date associated with that value. For example, if the maximum value is in P10, I would like the formula to return the date in P6.
I have tried without success to use the OFFSET function as follows:
=OFFSET(MAX(E10:Z10),-4,0)
VBA Last Row With Offset And Resize
Feb 21, 2014I trying to out together a small script which performs the following:
-Select cell B7 and offset this by 12 columns and one row
-Resize this by 14 columns, then
-Apply the font format to the selected range from the first to the last row
The code below is what I've put together so far, and although this runs without issue, it's not applying the formatting.
[Code] .......
VBA Offset Cell Value
Mar 20, 2014I'm using the code below to perform the following:
Compare a column of project end dates (column G on the "In Flight Projects" sheet) with the dates in a row of column headers, and Where there is a match, count the number of projects which are being worked within that given month.
[Code] .....
The code works fine, but I'm having a little difficulty in making an amendment to the code:
In the following section of code I need to select the Range ("G8"), but then say if the value in the cell, offset minus 4 has the value of "C&R" then run the rest of the script :
[Code] .....
I've made the following changes, but I'm unable to get this to extract the figure despite not receiving any error message:
[Code] ....
Loop & Offset
Jun 15, 2007I have a number (>100) of excel workbooks (consistent format) on a server and I am trying to create a master spreadsheet with links to specific cells. I started using formulae based on Concatenate and Indirect functions but always had to use F2 & F9 to get a result. I am now working on a macro to build semi dynamic links, I am some way there but need some expert help please.
In Col A I have the path and file name for all my source files - I have used the Filename *.xls & FoundFiles for this.
In Col B is my specific file name(s) extracted from Col A using an If , Len and Text function.
My macro declares variables; File = Range (“B#”) and Data(21) - an array of 21 specific worksheet cell references
I then select C1 and with active.formula insert the consistent path, File and Data(1).
Then C2 with path name, File and Data(2). Then C3 path name, File and Data(3). & So on for the 21 variables in the array - not elegant but it works okay
I am now at the point where I need to move down the rows and repeat this for each source.
I am wondering (hoping ) there is a simple way of offsetting this for the 100 rows / source files. I would also like to be able to set the offset repeat by counting the number of populated rows in Col A.
The code (from memory so syntax may be a bit wonkey):
Cannot Gain Value Using Offset
May 27, 2008I have a rather details and complicated procedure that in effect is designed to find a value (>=) than a text box value inputed.
There are 2 other list boxes (5 & 6) that are also designed to narrow down the search.
The values available in list box 5 are a customers name in column C.
(Sample sheet highlighted value in Yellow)
The values available in list box6 are a product type.
(Sample sheet highlighted in blue)
When i select a value in list box5 and in listbox6, i enter a numerical value into text box111.
I then click on a command button, to populate listbox3 with all found values in column C that are greater than or equal to the value in the text box.
Now comes the part i cannot seem to be able to do.
I need to be able to click on a selected value in list box 3, and find the value that is between 2-22 rows above it in column A and place this value in text box 4.
(List box 3 values are ONLY ever
Using The OFFSET Function In VBA
Jan 16, 2009I am trying to write two different codes to copy a range of data. Basically I am trying to understand how the OFFSET function works in VBA. The first code listed works fine and is as follows:
View 5 Replies View RelatedOFFSET With Variables
May 15, 2009I am trying to OFFSET from cell A1 based upon a variable in cell A2. The cell I need to OFFSET to is also located in column A, but it could always differ based upon the variable in A2. Here is the piece of code performing this OFFSET.
View 7 Replies View RelatedSet Range And Offset
May 16, 2009I am having trouble with one line of this code that I can't figure out how to write correctly. I have set the range, but I need to offset by 10 rows up. My code fails at set rng.
View 6 Replies View RelatedOffset(counter, 0)
Jun 11, 2009I'm copying values from one workbook to another. Each value has to be checked, so I do this in two steps.
View 2 Replies View RelatedOffset For The Cells To The Row
Sep 9, 2009how to make offset for the cells to the row -3 in colum B
View 9 Replies View RelatedOffset And Resize
Jan 11, 2010I have 3 workbooks, the first one contains the data and the second is the “Table1” containing "Normal records" and the third is the “Table 2” containing only "900 Records". Tables 1 and 2 will be linked to Access…..
Here’s my issue….
From workbook 1, I would like to copy data from certain cells that contain data to Table 1
From workbook 1, I would like to copy data from certain cells that contain 900 service records data to Table 2
In workbook 1, I have identified which information i want to keep by using the following formula,
Offset A Vlookup
Feb 27, 2007i have a table with customers and the rentals they have made. in the table it has their customer number and then the item code of the item they have rented out.
i want to have a table that brings up the item codes of what they have rented but with a vlookup it only brings back the first item they have rented and not the ones after that.
Getting Rid Of #N/A With MATCH & OFFSET
Oct 24, 2008=IF(MATCH($A7,$BX$15:$BX$112,0)>150,"",OFFSET($BX$14,MATCH($A7,$BX$15:$BX$112,0),1))
If there is not match, I get #N/A in the cell. I would prefer to get a value of zero (or ""). I've been experimenting with ISNA and ISERROR.
Using Offset To Cut And Paste?
Sep 6, 2012i have an excel file that come from a michine i use at work
start
100 pos
101 neg
102 neg
103 neg
start
101 neg
102 neg
102 neg
start
101 pos
102 pos
103 pos
where the first column is one continous stream on data(of variable length). what i need to do is every time the word start occurs copy down to the next start-1 and paste it to the same row is first start but over to the right ie
start start start
100 pos 100 neg 100 pos
101 neg 101 neg 101 pos
102 neg 102 neg 102 pos
103 neg 102 neg 103 pos
How To Use Offset With Recordset
Feb 25, 2013i have a created a connection with Access table named Test, the table has 3 fields, ID,Firstname and LastName. The values in field firstName is filled in a Combox which is in Sheet1 of excel sheet.
so far i have done with the coding which create a connection with access table and fille all the firstname from the table to the Combobox using a recordset.
the code for filling combobox value from records set is like
Do Until RecordSet.EOF
shp.ControlFormat.AddItem RecordSet.Fields("Name").Value
RecordSet.MoveNext
Loop
Now what I need is whenever I select a name in a combobox the Cell A1 in excel should show me the LastName for that name.
I am not very sure if we can use offset in this.
Offset Using Variable Value?
Jun 24, 2013can i make offset with variable value, i am trying to make a code to Auto filter data then copy it to another sheet.
then take offset of number of rows of previous criteria and copy next set of data
my code is
Sub Test()
Dim rng1 As Range
Dim rng2 As Range
Dim rng3 As Range
[Code].....
When i use this Code it offsets second data paste place to be very far away, like at cell 69 while it should be only at cell 6 or 7 based on L value, is that right, there is another way to do it ?
Sum (Offset) With VLookUp?
Jul 8, 2013I have a data set that is laid out like this below:
Jan 12 Feb 12 Mar 12 Apr 12 May 12 Jun 12 Jul 12 Aug 12 Sep 12 Oct 12 Nov 12 Dec 12
Revenue $1000 $1000 $1000 $1000 $1000 $1000 $1000 $1000 $1000 $1000 $1000 $1000
On another sheet I want to find the Revenue and sum the Months Jan 12 to May 12.
So I would like to have my answer read $5000.
I am having a hard time doing the Vlookup and summing a range at the same time.