Catch An Error And Reset The Entire Code To The Very Beginning And Skip That Entire Entry

Jun 5, 2008

I want to catch an error and reset the entire code to the very beginning and skip that entire entry. When I use "Next fieldSheetName" I get "Next without For," error 1004. Searches tell me I have an open block somewhere, but that's not true. Removing that statement (and having the loop iterate as normal) has no error at all.


Dim employeeName As String
Dim fieldMax, x, y As Byte ' Counters mostly
Dim workedHours, fieldSheetName As Integer

fieldMax = 204 ' Row number to stop on in the field time sheet
row = 4 ' Row specification for field time sheet. Begin at row 4 to ignore headers
' and start on the first name. This should not be changed!
Col = 3 ' Start at column 3 then increase by one to start going to next time entry

' RESET HERE!
For fieldSheetName = 4 To fieldMax Step 8 ' This is our MAIN loop. It iterates from 0 to fieldMax, which is 204...........

View 9 Replies


ADVERTISEMENT

Deleting Entire Customer Entry If One Cell Is Blank?

Dec 24, 2008

I have a large database of customers. I would like to edit this database so that it only lists those customers that have an email address listed in that particular column. I can then save that as a separate list to upload to my marketing campaign.

Is there an easier way than just deleting entire rows at a time? About a 2,000 name list with maybe 30% having email addresses.

View 2 Replies View Related

Highlight Entire Rows In VBA Based On Entry In Column A

May 29, 2012

I am trying to write a procedure to highlight entire rows in VBA based on a entry in column A.

I have the below which works for say 1000 rows but breaksdown when I have 58,000 rows which is the usual amount of data I will have.

Below is the code I have so far. It appears when I debug it breaks on the red line with type mismatch.

Option Explicit
Sub RemoveBH()
Application.ScreenUpdating = False
Dim intcount As Long
For intcount = Cells(1, 1).CurrentRegion.Rows.Count To 1 Step -1

[code].....

View 7 Replies View Related

Autofill Entire Row With Data From Above Over Entire Spreadsheet

Jul 28, 2014

I'm trying to autofill a series of rows (that are blank) with data from an above row. I want to autofill the row in its entirety, not just filling in blank cells.

For instance (assuming comma is a new column). Colors listed are just a data example. Space between commas indicates a blank cell:

142, RED, GREEN, , YELLOW, , BLACK, PURPLE
(blank row)
142, GREEN, RED, ,BLACK, , PINK, ,
(blank row)
(blank row)
(blank row)
154, YELLOW, BLACK, , GRAY, , PURPLE, RED
(blank row)
(blank row)

So rather than it just completing the task in one desired cell, it would complete the task over the entire spreadsheet. Data spread can be as far as row 500 and column BY, so you can see how a copy + paste or a drag would get monotonous.

Another small example data set:

1,1,1453,0,10,-35
(blank row)
(blank row)
0,0,1448,0, ,-35
(blank row)
1, ,1443,1,3,-36
1,2,1408,2,7, ,
(blank row)
(blank row)
(blank row)
1,2, ,2,7,-39
(blank row)
(blank row)
1,3,1344,1,10,31

And column A will always have data (unless the row is completely blank.

View 1 Replies View Related

Macro To Delete An Entire Row If A Duplicate Entry Appears Only In A Certain Column.

Feb 20, 2009

Is there a macro to delete an entire row if a duplicate entry appears only in a certain column.

1. Look for the column header with the name "File Number"
2. Anytime the same number under the "File Number" column appears more than once in that column, keep the row that contains first occurrence of that number buy delete the entire row anytime that number is repeated in another row in that same column.

This is regardless of what is contained in the other columns. For example..let's say these cells contained this data...

B1 - UTE00225
B2 - UTE00546
B3 - UTE65513
B4 - UTE00225
B5 - UTE00225

In this case, I would want to keep rows 1, 2, and 3. But, I would want to delete rows 4 & 5 because the number "UTE00225" has already appeared first in B1. I'm using Excel 2003.

View 2 Replies View Related

Create Error Handler For Entire Workbook?

Mar 15, 2014

Is it possible to create an Error Handler for the entire workbook, or do you have to put one on every sub routine?

View 1 Replies View Related

Apply The Code For Entire Row 4?

Aug 2, 2014

I have amended the code but it's for columns. I want this formatting for entire row 4 only and not for columns. Because it's disturbing my program if there is any data using ':' sign then the same formatting is applied which I don't want.

[Code] .....

The ':' sign is not changing to bold. I want to bold ':' sign too.

How to amend the code for entire row 4?

View 5 Replies View Related

VB Code For Going To Next Entire Empty Row?

Jan 30, 2012

i was currently gave this code. Sheets("Sheet1").Cells(Rows.Count, "A").End(xlUp)(2) = Me.TextBox2.Text Is there away this can modified to go to the next completly empty row in stead of just "A"? Like maybe A thru L or the entire row would be ok.

View 5 Replies View Related

Copy Entire Row Into Newly Create Sheet Error?

Apr 2, 2014

This macro below is meant to search a sheet for a user selected value, select the entire row and copy it into a new sheet that has been created under the name of the user selected value. It will create said sheet, but isnt finding the value and/or copying the active cell row. Im not getting any errors so it has no issue with the coding itself, it just doesnt work, have i missed something obvious again?

[Code].....

View 2 Replies View Related

AVB Code To Copy Entire Row To Another Worksheet

Mar 31, 2014

So I have an option on my userform that the user input selected.

I need the data once written to the worksheet [Master] to move based on cell AD [Customer Divert / TBP Divert / Failed Delivery]

Example: Row 12 has Customer Divert in cell AD I need to keep a copy on the master sheet but also copy the entire row to the customer divert sheet.

Need code and here to input in the Code sheet?

View 7 Replies View Related

Macro Error In Workbook - Entire Ribbon & Icons Greyed Out

Mar 3, 2009

I ran a simple macro that I created in my workbook, got a run-time error, clicked debug, clicked reset to stop the macro running, and now all of the icons in my workbook are greyed out. I can select cells, change worksheets, enter information in cells etc....just I can't save the workbook, or select any of the icons on my ribbon / in the office menu. Would really like to avoid terminating the application as I made a number of changes that I didn't save (doh doh doh).

View 9 Replies View Related

Delete Entire Row Through Macro Button And VB Code

Aug 21, 2007

How can we delete entire row using VB Code.

say example i want to delete a row having name 'Anis' by clicking on a buttton

is this possible?

View 9 Replies View Related

Getting The Entire HTML Source Code From A Web Page

Feb 12, 2010

I am looking to read the source code for a website that keeps the stats for a hockey league in Sweden

For other sites i can use the code below and it works fine, but the site i am using to get the Sweden stats seem to keep the data in some type of a Java app (sorry still somewhat of a newbie) and doesn't work the same as the others

when i veiw the source code just by right clicking the page all the data i want shows up. When i try to use my code it doesn't get the stuff i want.

I have tried both objDoc.body.innerHTML and objDoc.body.outerHTML and i get different results but not the same as right clicking on the page and viewing the source, is there another command that i can use to get it all?

the website is

HTML [url]

Sub Get_Stats()
Const strURIpre As String = [url]
Set ie = CreateObject("internetexplorer.application")
ie.Navigate strURIpre
Do
If ie.ReadyState = 4 Then
ie.Visible = False
Exit Do
Else

View 9 Replies View Related

Conditional Format Via Code For Entire Workbook

Feb 17, 2008

I found code that I would like to use conditional formatting code as shown here. Here is the code just in case:

Private Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer

If Not Intersect(Target, Range("A1:A10")) Is Nothing Then
Select Case Target
Case 1 To 5
icolor = 6
Case 6 To 10
icolor = 12
Case 11 To 15
icolor = 7
Case 16 To 20

how can I get this code to work across the entire workbook and not just for the specific worksheet? I tried pasting the code into the This Workbook under VBA Project and changing the Private to Public but no go.

View 7 Replies View Related

Copy Entire Worksheet Including All Macros And VBA Code

Dec 16, 2008

I need to copy my worskheet multiple times to create about 10 of the same worksheets within a workbook. I know if you click in the very most top left hand corner of the worksheet, then click copy, go to the new worksheet and click paste, it copies the whole page, but it does not copy over the VBA Code.

Also, for some reason, it does copy over my macro buttons, but does not put some of them in the right spot?

View 6 Replies View Related

Macro Code To Delete Entire Row If Cell In Column Is Equal To Value

May 7, 2014

I need an easy code that searches all of column A and deletes the entire row if the cell has the value "-". It needs to find the last row of data using something like LastRow = Range("A" & Rows.Count).End(xlUp).Row

View 4 Replies View Related

VB Code To Find Instances Of Text In Worksheet And Colour Entire Row

Aug 21, 2012

I'm trying to develop code that will perform the function in the title. I want to use an if statement that looks at cells across the worksheet and where it finds certain text it should colour the entire row. I would also like to be able to input the text via a user box. I don't necessarily want the code

View 3 Replies View Related

Finding File: Catch Error Handler Out On The Web

Jan 19, 2009

I can not seem to find a good example of code for a try and catch error handler out on the web for something I am working on. Here is the code I am working with:

View 2 Replies View Related

Reset Dropdown List To First Entry

Feb 18, 2014

I am trying to reset various (data validation) drop down lists in a the dummy worksheet attached. Most of the code i have come across clears the cells completely, however i would like it to return to the 'select' option (first on the list) in the list.

I have come across this code, but it does not seem to work:

[Code] .........

I want the clearing code to run from the command button in the 'instructions' tab to clear the drop down lists in the '1. Inputs' tab.

Attached File: Reset drop down list.xlsm‎

View 4 Replies View Related

Add A Value In Entire Row

May 7, 2014

Is there a way to concatenate part of a formula into an entire row?

If I have a formula such as =(8.15*$D$1)*1.35 whereas each line in the row has a different value in the brackets. I need to add + 0.60 in the brackets. But don't want to do it manually for 1200 lines.

View 2 Replies View Related

Highlighting Entire Row

May 17, 2009

This problem has been driving me insane, as I thought it wasn't possible to do in excel however this morning I accidentally pressed a shortcut key on my keyboard and what I wanted, happened.. pity I can't remember how I did it.

How do I highlight an entire row, but remains highlighted when i enter info in the cells until i move down to the next cell? Eg. I click on row"1" so that all cells are highlighted, then while entering info in B:1 - the entire row is still highlighted? This will be very useful in my line of work.

I know there was some information on conditioning formatting, but surely there is a way to do it via keyboard shortcut since i accidentally did it just before.

View 6 Replies View Related

Offset Entire Row

Oct 9, 2008

I have used the Selection x1Down code to select all rows to the next one with data in but now need some code to deselect the final row (I want to delete all of the blank rows above)

View 2 Replies View Related

IF (entire Row Selected) ???

Oct 16, 2008

How do ask if a entire row has been selected in vba, e.g. from column 'a' to 'iv' with no specific row number.

View 5 Replies View Related

Deleting The Entire Row In VBA

Dec 24, 2007

I have a spreadsheet with thounsands of rows. Some of the rows I'd like to delete because thier values are below 5%. I wrote a VBA code, which primary function is to look for a cell and delete the row if the value is less than or equal to 5%. The code looks fine but I get an "Infinite Loop" anytime the first row value is not true. Below is the code,

-jungleman1

Sub Delete_Zero_Factors()

Dim i As Integer
Dim CUSIP As String

Sheets("Report").Select

Range("B5").Select
i = 0

While Not (IsEmpty(ActiveCell.Offset(i, 0).Value))
CUSIP = ActiveCell.Offset(i, 0).Value

Do While (ActiveCell.Offset(i, 1).Value

View 9 Replies View Related

Entire Row Empty

Jan 14, 2008

Looking for a formula to establish whether a whole row is empty or not

I try this:
=LOOKUP(2;1/(4:4"");4:4)=NA()
(XL 2007)
But, this works, except when one cell contains NA()

how to make a general expression?

View 9 Replies View Related

Delete Entire Row If

Oct 28, 2008

How would i search the entier worksheet im in, looking at column b only, and delete the entire row if i find the word Date in it.

View 9 Replies View Related

Copy Entire Row

Jan 19, 2009

Here is the code that I have so far and it works almost the way I want it to. I need to copy over more than just that cell that is being coppied over I need to copy over certain columns in that row.

Private Sub ListBox1_Click()
Dim wksData As Worksheet, wksPayment As Worksheet

'payment sheet
Set wksPayment = Sheet11
Set wksData = Sheet26
Dim LR As Long
LR = wksData.Cells(Rows.count, "A").End(xlUp).Row

Dim varField As Variant
varField = wksPayment.OLEObjects("Listbox1").Object.Value
Range("F6").Value = varField

View 9 Replies View Related

Copy Entire Row From One Ws To Another

May 3, 2006

I have looked through the forum at several different copy and Vlookup examples, but I cant seem to get them to work. I need to compare worksheet(1) (Portfollio) in column B against Worksheet(2) (PJS Cap) column B to find any items that the worksheet(2) has that Worksheet(1) does not. Then for these items copy the entire row to the end of worksheet(1). My code gives a runtime error on the copy line

Sub PJSUpdate()
Dim Found As Boolean
Dim I As Integer
Dim J As Integer
Dim LastRowE As Long
Dim LastRowP As Long
Dim InsterRow As Long
LastRowE = Worksheets("PJS Cap"). Range("b65536").End(xlUp).Row
LastRowP = Worksheets("Portfollio").Range("b65536").End(xlUp).Row
InsertRow = LastRowP
For J = 2 To LastRowE ' loops through the portfollio worksheet project list
Found = False 'flag intitated to not found........................

View 2 Replies View Related

Delete Entire Row

Sep 24, 2006

when i delete the entirerow, it shifts the rows up (which is what I want) but it skips that row when it does.

so if I have 2 blank cells together it will delete the 1st and leave the 2nd blank.

Sub ()
Dim myrange As Range
Set myrange = ("a:a")
For Each c In myrange
If c.Value = "" Or c.Value <= 5 Then
c.EntireRow.Delete
End If
Next

End Sub

View 5 Replies View Related

Vba Autofill Entire Row

Feb 12, 2007

I have recorded a Macro to AutoFill a row in my Excel spreadsheet. The VBA code is very simple and looks like this:

Selection.AutoFill Destination:= Range("D8460:T8460"), Type:=xlFillDefault
Range("D8460:T8460").Select

I thought I would simply be able to click on another row and re-use the Macro, but this doesn't seem to work, as I get the following error message: AutoFill method of Range class failed.

What do I need to change in my code, so that it will work in any row I choose?

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved