I have 3 workbooks, the first one contains the data and the second is the “Table1” containing "Normal records" and the third is the “Table 2” containing only "900 Records". Tables 1 and 2 will be linked to Access…..
Here’s my issue….
From workbook 1, I would like to copy data from certain cells that contain data to Table 1
From workbook 1, I would like to copy data from certain cells that contain 900 service records data to Table 2
In workbook 1, I have identified which information i want to keep by using the following formula,
I trying to out together a small script which performs the following:
-Select cell B7 and offset this by 12 columns and one row -Resize this by 14 columns, then -Apply the font format to the selected range from the first to the last row
The code below is what I've put together so far, and although this runs without issue, it's not applying the formatting.
I have a NAMED RANGE of data consisting of 4 columns and as many rows as is selected. Name it CompTable1.
I loop through all of the 4 columns of data to format it (as shown below). This snippet is for column 1 of CompTable1 (a public variable as string) and I basically have the same situation for each column of 4 but replacing each respective x in cells.(n,X) & offset(0,-x) to take into account of where I wish the data to go as I loop through. Ultimately 4 (For Next) loops.
[Code] ......
The new range with 5 columns is as follows: Column 1 from CompTable1 = Column 1 of new range Column 2 of new range is blank for something later Column 2 from CompTable1 = Column 3 of new range Column 3 from CompTable1 = Column 4 of new range Column 4 from CompTable1 is not used in the new range but is formatted Column 5 of new range is blank for something later
This certainly works very well and with my amateur VBA status am quite proud of how far I have come in a few months. Is it efficient? Is it free of possible errors? Likely not. I wish to rid myself of the "Select" each cell plaque though maybe using a resize, offset or copy destination operation but can't seem to get it working. Once I do get the data in the new range, I format everything without selecting quite well with my methods described above.
I am having some difficulties using a combination of IF and the OFFSET function to display a range of cell values from another column based on a simple condition. The values I need to display at the destination cells should be offset by 8 columns to the right and "X" rows down from the reference column. The value "X" is to be determined via the IF function to check for the row index number.
For example, if Index value "X" = 8, then display the value of B2 in cell I9. IF X = "9", display B2 in cell I10 etc.
I have attached a sample worksheet that provides some examples.
I am trying to write a code to resize every second row between the range of A5 and A500 (Starting at A5) to 12.75 but am unable to find a simple loop to do this.
Fa is a code that searches, once it's found something, it then puts that one cell.value into Cells(c,r). it then moves on until the next cell found with the required contence. I need it to put that one cell, and the next 4 columns along side it starting in Cells(r.c)
The problem is, I keep getting a global error. I am sure I have done something like this before, but cannot find it, or remember how i did it.
stretch" the userform to fit the height and width fo the screen. I dont want to simply change the height and width of the userform, i want the controls within the userform to stretch with the userform so that it looks the same, just fullscreen. this is what ive found by googling:
VB: With Application .WindowState = xlMaximized Zoom = Int(.Width / Me.Width * 100) Width = .Width Height = .Height End With
however, this just stretches it to match the width of my screen, but doestn consider the height, so that if i have a widescreen vs a square screen it will cut off the bottom of my userform. It would be great if there was a zoom type featur that zooms the vertical and horizontal dimensions seperately... more like a stretch than a zoom.
I need to make rows expand to fit the largest text box within that row. I found the code below online, it works perfectly on the spreadsheet it came on but it doesn't work on my spreadsheet.
Dim cr As Range Dim ht As Single Dim mht As Variant Dim cn As Integer
1.My macro code to insert picture from C:pictures to worksheet in colum B,but the insert pictue are very big. how can it is automatic resize with autofit in the height of the column B when i click the insert button.
2.I need some code for the delete button. if I need to delete some picture,when the delete button is clicked , the input box prompt for key in the picture name to delete. if i key in the pictue name , eg.pictue2 , so the name of pictue2 in the column A and the pictue2 in the column B is deleted.
i m sending image files via EMail attachment with VBA code. Though the images are 5Mb+ each and when sending 20+ on a 128k upload connection that takes a while. Is there a way that the images can be resized through vba and saved as a new folder. Or send the images to another program and pause the code until the resizing has been done.
I am trying to print a range that falls just outside of a normal A4 size. Is there a way of scaling this range to fit the page. Withough changing the column sizes before printing(each column is diffrent size). Or will i need to load the column sizes into a array and resize for the print then back to original size from array.
I'm trying to resize the data labels in my chart so that the word Institutional appears on 1 line (It's currently on 2 lines) like the pic below:
but clicking the corners of the data label and dragging it does not work for me. I click on the corners and nothing happens. How I can make the data labels bigger without getting the text cut off to the next line?
Before I will hand in my proposal I have to check if my ideas are achieveable in excel. To keep it simple, the idea is to use different moving averages and the Min/Max(t-1, t-n).
For example, a buy signal is given when a fast MA crosses the slow MA from below. Or a buy-signal is given when the price on t is greater than MAX(t-1:t-n). Due to the scientific aspect I have to analyse a lot of variations of these moving averages and breakouts.
My question: How can I change the range of a formula with an other cell.
For example: Range: B1=20
MAX(A1:A20) MAX(A2:A21)
How can I program it such that when I change the value in A1, the range of the formula will change with that value?
I have to refer to a named range in a macro, but in the beginning I don't know what size it will be. So, in the beginning myRange will always consist of a single cell, which later on will be the 1st cell of the correctly sized range. While the macro runs, the correct size of the range is calculated, and at that point the range has to be resized, say to 'n' rows by 'm' columns, with the original cell as 1st cell.
I use comments to supply various detail information on the value in the cell. This might take 10-12 lines of comments, but only the first five appear when you hover over the cell. In order to see the entire comment you have to right click and edit then manually resize.
Any tips on how to resize at the time the comment is loaded so no manual intervention is required?
I have a listbox filled automatically from some cells. I have to choose an item from this listbox, click a button, and then my macro will summarize some data. All it´s running, but a little problem, the size of the listbox is changing itself after some actions. For example, when i change the value of the cells from where i fill this listbox.
i have a dynamic pivot chart. It works well, except the chart area size, it remains the same. Is there any way how the chart area can be automatically adjusted/resized (see the example attached)? Maybe with VBA?
I have a (semi-inherited) macro that prints different pages of a workbook, based on whether and what their entries are. One of the pages contains a text box, where users will enter different lengths of text. When the macro runs, it prints right the first time but also "resizes" the text box so that future print attempts only print part of it.
I put "resize" in quotes because the text box does not appear to change shape. However, when I look at its properties it suddenly says it is much smaller than it was before (and still appears to be).
when i use a macro to add a comment to one of my cells, if i put in too much text the box doesn't resize itself and you can only read part of the comment. how to resize the comment box to the size of the text i put in?
I'm trying to copy a picture from one Worksheet to another and then resize it, when i select the picture after pasting it into the other worksheet i use the code ActiveSheet.Shapes("Picture 6").Select, the problem here is that i don't know the name of the picture because i use a loop that copys alot of pictures.
how can I resize a from my active cell to a specific cell (eg. L1) and select all the cells in between? I am using this code to select the last cell after my data (active cell is in column A).
I have a Userform that when opened shows the Excel spreadsheet sitting behind. Is it possible to write code such that when opened the Excel workbook has been sized and re-positioned such that it is effectively hidden under the Userform?
Is there a way to automate the resizing of a row to accomodate the text that is pulled into a cell as the result of a formula?
I have a merged cell which receives the result of a DGET formula. The result can be as few as 6 lines of text or as many as 24 lines.
I suspect I need to count the number of lines in the result and resize based on that count multiplied by 15 points.
I don't know how to write the VBA but it would be kind of Resize Row.Countlines x 15 pts. and be executed by the event of calculating the formula from its default setting.
Practically speaking, the default setting is sized per the result of the desired code: there is a blank formatted merged cell that can be manually overwritten that is sized by the typical number of bullet points.
