One Macro To Run Other Macros..

Oct 14, 2009

I have 5 macros that update/gather info from the net, and instead of running each of these individually, i would like to be able to create 1 super-macro that runs them all. How would i go about doing this?.. say they're called M1, M2.. M5..

View 2 Replies


ADVERTISEMENT

Macros Not Visible: End User To Be Able To Run The Report Multiple Times By Choosing The Name Of The Macro From The Macro Menu

Jul 16, 2007

I have written two VBA programs around the same time. Both run on open and pull external data and create graphs. My problem is that I want the end user to be able to run the report multiple times by choosing the name of the macro from the Excel macro menu (i.e. Tools>Macro>Macros) but only one of the workbook macros shows up on the menu. why the other macro is not visible on this menu???

View 2 Replies View Related

Macro To Run All Other Macros?

Feb 21, 2013

I have several commonly used macros saved in my personal.xlsm file so I can tap into the power of these macros on all spreadsheets without having to re-create the macros in every worksheet I do.

The problem I have is that it's slow to recall these macros by clicking on the Developer-->Macros button. I'd much rather assign a hotkey to each...but the Hotkeys only work with ctrl+letter and I find that I accidentally assign my macros to hotkeys that are already hotkeys (example: ctrl+z for undo).

How can I create a macro that gives me a pop-up box with buttons I can push to activate the macro I need and then the pop-up box goes away after selecting the macro (something like a message box pop-up)?

View 2 Replies View Related

Nested Macros Within Another Macro

Jan 28, 2010

Is there any way to nest a macro within another macro?

I have a macro inside of a module, and when the user clicks on a button to invoke that macro, it does some calculations, and then I need it to call another macro within the same module to do some calculations on another sheet.

View 2 Replies View Related

Run Macro That Applies To Other Macros

Apr 23, 2014

So I have a macro that sends an email of the active spread sheet. I want to add that macro to another macro. The tricky part is that i call other macros inside the macro. So is there a way i can add the send email macro and have it apply to all the macros i call. Here my code:

Code:
Sub Run_All_Billing()
'
' Run_All_Phones Macro
' Make sure you open "gateway.csv" "phone.csv" "ctiroutepoint.csv" and "Billing Contact.xls"
' Call Gateway Workbook and clean it up

Windows("gateway.csv").Activate
Call Clean_Up_Gateway

' Call Phone Workbook and clean it up

[Code] .........

Here's my send email Macro

Code:

Sub Send_Email()
'
' Send_Email Macro
'
Dim oApp, oMail As Object
Dim WB As Workbook
Dim ArchiveFolder As String, FileName As String

[Code] ........

So I want to add that send email macro into my Run all billing macro and it apply to all the macros I call.

View 2 Replies View Related

Macros That Should Activate Another Macro

Jul 24, 2007

I need to write a macros that will activate another macros whenever the cell "I4" is modified. So far it is not working the way it suppose to. Maybe anyone can spot a mistake? Here are both Macros that I have: ....

View 9 Replies View Related

Macro That Creates Many Macros

Jan 17, 2009

I am having a problem trying to create a macro that will loop in order to create several macros. I have a long macro (call it mainmacro) that needs to be able to create several simple macros to be used by the user of the workbook. Each macro has a variable that needs to be taken from mainmacro. Each macro is different based on the value of the 'i' loop variable that the macro is created in. i'm sure im making this sound more complicated than it really is...basically:

Sub mainmacro()

'lots of code not relavent to this issue here

For i = 1 to 10

'create 10 macros that, when run, would highlight A1, A2, etc.
Range("A" & i).Select

Next i
End Sub

This is just an example. But, basically, i just want to be able to automatically create a bunch of macros with a variable from mainmacro.!

View 11 Replies View Related

Macro To Enable Macros

Oct 23, 2006

I am trying to use the EnableMacros. zip script located here {url} But I am having a hard time making it work!

1. I have copied the module in EnableMacros.zip and imported it into my workbook.
2. I have placed identical code in my workbook's ThisWorkbook as is in the EnableMacros.zip's ThisWorkbook.
3. I have copied Sheet1 from EnableMacros.zip titled "Info Sheet". In MY workbook it is sheet7, but it is titled the "Info Sheet" in the EnableMacros.zip.
4. I have also copied sheet6 from EnableMacros.zip into my workbook and titled it "LoadScreen". In EnableMacros.zip the sheet is titled "Sheet1"
...

View 4 Replies View Related

Combine 5 Macros In A Sequence Into 1 Macro?

Nov 28, 2012

I have 5 macros to be run in sequence. I have copied them into the file attached with ----- line as separator between them.

How can I possibly combine them all into ONE MACRO?

View 5 Replies View Related

Warning Macro Message With No Macros

Apr 3, 2009

Everytime I open the excel file I am working on I get a message saying that the file contains macros.

I have deleted all the macros I could find under "Tools" and "Macros" but I still get Module1.sortie, sortie and sortie listed. I can delete Module1.sortie but for the other two, sortie and sortie, I only have the "cancel" and "create" options.

View 14 Replies View Related

Macro To Run Macros Without Referencing The Filename

Feb 2, 2012

I have several macros that import several files.

I'd like to create one macro that runs all the other macros. The sample below works by running Import_01 and Import_02

Code:
Application.Run "'FY13 Budget Worksheet - 400 Student Affairs - BACKUP.xlsm'!Import_01"
Application.Run "'FY13 Budget Worksheet - 400 Student Affairs - BACKUP.xlsm'!Import_02"

The problem is this filename may change. I'd like to remove the reference to 'FY13 Budget Worksheet - 400 Student Affairs - BACKUP.xlsm' so that the above code will work should the user change the filename.

View 2 Replies View Related

Edit Macro When Macros Disabled

Oct 23, 2006

I accidently put the Application.Quit command in the wrong place. Now Excel closes immediately when the macro executes. I can get into Excel if I disable the macro, but then it won't let me edit the macro. Is there a way to edit my macro without executing it?

View 7 Replies View Related

Macro: Remove Macros From Buttons

Dec 17, 2006

I am trying to come up with some code to loop through all worksheets in the workbook and remve assigned macros from any buttons on each sheet

My code below. I type btn. and reviewed the items offered by intellisense, but nothing seemed fitting.

Sub RemoveAssignedMacro()

Dim wb As Workbook
Dim btn As Shape
Dim sht As Worksheet

Set wb = ThisWorkbook

For Each sht In wb.Worksheets
For Each btn In sht.Shapes
btn.
Next btn
Next sht

End Sub

View 8 Replies View Related

Encourage Enabling Of Macros: Disable Macros When Opening Then The Worksheet Menu Bar And Other Command Bars Are Still Available

Aug 26, 2009

I have an Excel 2003 program that contains macros. One of the macros hides certain command bars and disables the worksheet menu bar. On close the opposite is true. The problem is, if a user uses the disable macros when opening then the worksheet menu bar and other command bars are still available. I would like to hide all of the data sheets and display another sheet that would normally be hidden displaying a message that the macros have to be enabled for the program to work correctly if disable macros is chosen. When the enable macros are used I would like the Error page to be hidden.

View 6 Replies View Related

Macros Running Twice: SaveAs Macro Stops

Jan 28, 2009

I have been working on some Macros. I am compiling a macro that runs other macros. I have two noticeable problems.

1 - My SaveAs macro runs fine by itself. But when called or ran by another macro, (which calls more than one macro) the SaveAs macro it stops.

2- Many of my macros, when ran by another macro (which runs more than one macro) cycles through twice.

My specific question is about no. 2 and the following are the individual macros and the macro that runs them.

View 2 Replies View Related

Macro To Run Macros In All Files In Specific Folder

Feb 9, 2012

I need creating a macro that i can use in a file that will open all workbooks in a specified folder. Each .xls file has a macro that is slightly different and i want to go to one book and run one macro that will make all macros run.

View 4 Replies View Related

Linking Macro Workbook To Other Workbooks That Use Macros

Jan 10, 2014

I am trying to implement the idea of creating an application with two workbooks: a hidden code workbook (CodeWb) that holds all of the forms and macros, and a separate visible data workbook (DataWb) that uses the macros in CodeWb. The DataWb houses a little bit of VBA code to open the CodeWb, which then supplies the programming power to handle click events, etc., performed by the user in the DataWb.

I have advanced to the point of being able to open CodeWb from DataWb and trigger execution of a macro named "DataFileOpen" in CodeWb. This macro initializes things in DataWb and creates buttons there on a particular sheet, using the line:

Application.Run "CodeWb.xlsm!DataFileOpen"

So far so good. This works fine. My problem is that nothing happens when I click on the buttons created in DataWb, with their event handling code residing in CodeWb. Obviously, I'm missing something that maintains a connection between the two workbooks.

How can I use the code in CodeWb to handle all events occurring in DataWb?

View 2 Replies View Related

1 Macro To Execute Multiple Macros On Different Worksheets

Nov 17, 2006

Is it possible to create 1 macro which will execute multiple macros on different sheets?

I have approx. 12 macros that I can run in order, and I would like to create 1 button on the first sheet of the workbook to execute all 12 macros, which are contained on various other sheets. Is this possible?

When I attempted to do this, the master macro ran an odd function on my first sheet.

View 9 Replies View Related

Running Multiple Macros With A Single Macro

Oct 5, 2007

I have 3 seperate macros (macro1, macro2, macro3) that have to be run in order. Is it possible to create a macro to run them in order and what would the code look like? I will have it assigned to a button on the worksheet.

View 9 Replies View Related

Stop Macros Showing In Macro Dialog

Dec 9, 2006

I've forgotten how to prevent the macros from showing in the macro dialogue box.

I'm sure it's got to be something with the VBA editor, but I can't figure it out.

I've got some files where the macro list is hidden and I'd like to do the same again, but for the life of me....I'm stumped. I'm sure it's something very simple.

I've protected the Worksheet & Workbook.

I've done some searching...."macro hide", "hide dialogue" etc. but can't seem to find what I'm looking for.

It's been a while since I had to amend code, as everythings been running very smoothly.

View 5 Replies View Related

Identifying Macro Starting Point & Combining Macros

Nov 24, 2009

I am using the following code to identify any blank rows in a sheet and delete them:

View 3 Replies View Related

Distribute Macros: Is Possibility That There Is A Macro In The Workbook Even When There Is No Worksheet

Dec 13, 2006

Is there a possibility that there is a macro in the workbook even when there is no worksheet? I do not want a personal macro, instead, when I open a workbook(with no worksheet), goto tools->macro->open, I should see the macro. This would be helpful so that I can passover the macro to all my team mates and they can open any worksheet from there and work on the macro.

View 2 Replies View Related

Excel 2010 :: Current Macros Not Running When Recording A New Macro?

Apr 6, 2013

I have a workbook with numerous macros in it and they are assigned to buttons in the different worksheets. I am trying to record a new macro and when I start recording and click on one of the other macros nothing happens. This wasn't a problem in excel 2003.

View 2 Replies View Related

Excel 2007 :: Macros Enabled But Record Macro Grayed Out

Apr 14, 2008

I have excel 2007 and I want to record a macro. I have enabled all macros via the Trust Center settings and have even saved the current workbook (created from scratch in 2007) to a macro-enabled version.

But when I click on the 'developer' toolbar, 'record macro' is grayed out.

View 9 Replies View Related

Assign 2 Macros To 1 Button (or Adding VBA Code To The Existing Macro)

Dec 23, 2009

I'm verrry new to editing VBA code and I've been trying to figure out how to send a column of data ("Min Data" AB3:AB21 from "Sheet1") to a worksheet ("F4" - Min) and sending another column of data ("Max Data" AC3:AC21 from "Sheet1") to a different worksheet ("F4" - Max) by using only the one button ("Record Data" from "Sheet1"

I've been trying to figure out ways to edit the VBA in "Module 1" to make this work

Can anyone help me out here? If what i'm asking for isn't clear enough, just let me know and i'll try to explain in more detail.

View 6 Replies View Related

Enable/Disable Macros When No Macros Are Present

Jul 28, 2008

I have a user that keeps a maintenance log in an Excel worksheet and sends an updated copy once a week to a board member. Two weeks ago, the board member started complaining that he was prompted to enable/disable macros on opening and became worried when my user stated that no macros were used in the book. He is now concerned that we have sent him a virus.

I know the file is clean because I've scanned it, and when I look at the file in VB, there are no modules or classes present just the Sheets 1-3 and the ThisWorkbook file. None of these objects have any code in them. My user does have some macros in PERSONAL.XLS but they are not used in the workbook in question.

No one else gets the prompt for enabling/disabling macros. Even if I set my security to prompt for any macros, I get no message. I'm convinced that there must be some setting in his Excel that is causing this individual to get this message. Is there anything else other than a macro that would cause this?

View 9 Replies View Related

Excel 2007 :: Create A Main Macro To Control Other Macros Within A Workbook?

Nov 7, 2012

"How to create a 'main' macro to control other macros within a workbook". I have my individual macros created. There's one macro for each sheet that searches online data and returns the information. I have one of these per sheet (a total of 20 sheets) since I couldn't find a way to have all 20 macros be on one sheet and still work. My trouble is that whenever I'm on my 'main' sheet and try to run the macro which applies to a 'secondary' sheet, I get an error. I have to select the sheet first, then run the macro and it works. Below is the macro on each sheet.

VB:
Sub Holding1()
Dim DataSheet As Worksheet
Dim EndDate As Date [code].....

View 8 Replies View Related

If Macro Is Disabled: Place A Message On The Sheet Saying This Will Only Work With Macros Enabled

Aug 17, 2006

When you enable macros the sheets 2, 3, 4 ect are visible but if you disable macros, you only see sheet 1 and and you can place a message on the sheet saying this will only work with macros enabled.

View 2 Replies View Related

How To Delete Another WorkBook Macros Using Macros

Jul 23, 2005

What is the commands or script for deleting a macro automatically using
another workbook macro.

View 9 Replies View Related

Hiding Macros From The Run Macros List

Jul 14, 2008

Is there a way to hide a macro from the list where you choose which to run, but not in the VBA editor? The userbox I just created calls upon 2 different macros, and has a macro to bring up the userbox. I need a way to hide the macros in Module3 from selection, but keep the macros in Module4 available to choose to run.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved