Open Files With Number Extensions
Feb 22, 2007
I have a workbook that will need data from another which will be located in the same directory. I need to open this workbook however the filename will be imported daily and be different each time (i.e. 010707.xls, 010807.xls, etc.) The only two files residing in the directory will be the active file and the one that needs to be opened. Is there a way to assign a variable for the 010707? Currently I have the following and need to manually modify the file name: Workbooks.Open Filename:="C:My Documents emplate10707.xls"
View 4 Replies
ADVERTISEMENT
Jan 8, 2010
What im trying to do is have a macro that will open a file called Blue 1.xls in location "I:SchedulesBlue" and then copy data from cells N13:034. Then paste it into another excel file (Press.xls)on worksheet "Press Break" cell G14.
The data that is copied not always fills up the cells N13:O34 so I need it to go to the next blank cell in column N and paste the information from file Blue 2, and so on for Yellow 1, Yellow 2, YellNR, and Green.
So to summarise I need a macro to open 6 files copy data from the same location on each of the files(N13:O34) then close and paste it into a master document(Press.xls) worksheet "Press Break".
View 9 Replies
View Related
Jul 5, 2007
I want to allow users to place files (.jpg, .tif, .pdf, .pps etc) into a network folder and then have my program open each file and display it for 30 seconds then close the file and the application before opening the next file.
1. Set up a loop to get a directory listing of the folder and write the listing to a text file.
2. Open up the text file and get the next filename in it
3. Open the file in the associated application
4. Wait for 30 seconds (or some period of time) and then close the file
5. Repeat steps 2-4
DoIt = 1
While DoIt = 1
Open "C:TempList.txt" for output as #1
Print #1, Files In Folder
Close #1
Open "C:TempList.txt" for input as #2
while not eof(2)
Line input #2, MyFile
Display MyFile on screen
Wait for 30 seconds
Close MyFile and MyApplication that opened it
wend
Close #2
I can get the directory listing just fine with no problems
I can open the files in the associated application just fine with no problems.
with closing the application after 30 seconds or some period of time.
I need some code that will allow me to easily send it a filename and it will know how to close the file and the application that opened it.
View 9 Replies
View Related
Feb 8, 2009
I have an Excel application (Excel 2003) which is stored in the default Program Files folder by the Installer; for example: c:program fileszxchello.xls. The problem I am running into is this file opens as Read Only in Vista and this is interfering with the running of the application. There is no problem opening the file normally in Windows XP.
I have been able to narrow down the cause of this to the User Account Control system in Vista - if I turn OFF User Account Control, the Excel file opens normally and my application functions normally. Is there another option to open the Excel file without turning OFF User Account Control because some users may find it unacceptable to turn OFF this security feature. Ofcourse, one option is to install the application in another location, outside the Program Folder, and the file would open normally, but the Packaging Wizard that I am using to package the application does not allow me to install the application in any other location and thus, the application installs in the Program Folder and I am running into this problem of the Exel file opening as Read Only. Is there a way out of this situation where I can open the file normally (not as Read Only)?
View 5 Replies
View Related
Sep 15, 2014
I'm trying to open multiple files based on an array of WBnames that are on a 'Dashboard' tab, but I only want to open them if they are not already opened. The code below doesn't seem to check if they are open and just opens everything....
VB:
Sub OpenWorkbooks()
Dim WorkbookOpen()
Dim WBnames() As String 'Array of WorkBooks to be Open
Dim WorkbookCnt As Integer
[Code] .....
View 4 Replies
View Related
Jul 3, 2007
I'm doing the following:
Dim myname As String
myname = Application. GetOpenFilename
I use it to attempt to open first a QuickBooks file and then an excel workbook.
The Quickbooks file opens fine. The Excel workbook never appears to open but
I do get the full file pathname to my excel workbook returned which I then
parse off to get just the workbook name.
Why would it behave this way? I open both these files manually all the time.
Also, I'm trying to use a filter as follows:
myname = Application.GetOpenFilename("*.QBW")
I get a compile error saying that I'm calling the function wrong.
View 5 Replies
View Related
Aug 23, 2013
The macro should...
1. Autofill dates from the Start Date ("D5") for x amount of years. Autofill begins in Range("C10")
2. Point out the THIRD 'wednesday' of every month with a "1" in column D.
3. Point out the second last 'weekday' of every month with a "1"in column E.
View 3 Replies
View Related
Mar 25, 2007
I want to automate the download process of these scan files we use. I can figure out how to do that if not for the two wildcards I'm about to throw out.
What I can't seem to figure out is how to use VBA to determine which files to import. I was thinking about possibly having VBA look for the time stamps on these files in the scan file directory, and then only import those ones which created in less than an hour from current time.
I have only a few days of VBA experience, so I don't have a clue where to start. If anyone could provide assistance/point me in the right direction.
By the way, the files that I am importing will be a comma delimited file. However, for some reason, the files are all extensionless (without .xxx)
View 9 Replies
View Related
Apr 21, 2009
I have the code below. It openes all csv files within a folder, then delete rows depending on the value of a cell. Now it needs to save the file as a xls file ....
View 9 Replies
View Related
Apr 18, 2013
I have a phone list and I am trying to add a search box to it that when you type in the Employee name, it will return the value of the cell adjacent to the search result so the extension can show up.
I am a VBA Novice, but I have found plenty of code for the searching aspect of it. I am having trouble figuring out how to have the search occur and then return a different value then what was originally searched for.
Ideally I would like the msg box to show both the employee's full name and extension.
View 4 Replies
View Related
Mar 7, 2012
When I open some csv files with this code : "Workbooks.Open myDir & "" & strFilename" it will open all messy.
View 1 Replies
View Related
Aug 2, 2006
I quite often bring spreadsheets home to work on, but in the last few days it seems that any sheet with a macro produces an error message when I try to open it on my home pc.
(Excel has encountered a problem and needs to close) The files are created with excel 2003 and my home version is 2002. Previously this has not been a problem. I can still load versions of the same spreadsheet from a week ago, but not any recent sheets containing macros. Macro security is set to medium - always was.
Is there a setting somewhere that could have inadvertantly been changed that is causing this problem?
View 9 Replies
View Related
Aug 10, 2008
I was trying to read BMP file. But when ever there are NULL char in File Left,Right doesn't work. Does any one have any alternative for this. For Eg. here are first 10 bytes of a BMP file. 42 4D 4E 01 00 00 00 00 00 00 3E
Open [C2].Value For Input As #BMP_Src 'Read BMP As Input File
While EOF(BMP_Src) = 0
Line Input #BMP_Src, sTemp
While Len(sTemp)
ActiveSheet. Cells(iRow, iCol).Value = Left(sTemp, 1) 'Update readed Char
x = Left(sTemp, 1) 'Temp Var to see Char
sTemp = Right(sTemp, Len(sTemp) - 1) 'Remove Updatd Char
iCol = iCol + 1 'Update Col Count
If iCol > 10 Then 'Init Col Count
iCol = 1 '
iRow = iRow + 1 'Inc Row Count
End If
Wend
Wend
In this code after reading 4th Byte Code jump to 10th Byte. because Left, Right consider NULL as endof string. I asked this Question to know if there is any alternative way to read NULL char in VBA.
View 2 Replies
View Related
Dec 16, 2008
I receive excel reports every day. But the last couple of days when downloading the reports I get them as csv. Also older reports I have saved on the hard disk open as csv.
Well, the ones I have saved have are now csv files and I haven't done anything (knowingly) to change them to csv.
View 9 Replies
View Related
Nov 3, 2008
I would like to create a button that will open a file in a location based on the date of the file. So if I click the button the file with the latest date is activated as read only. The file name is always the same except, the date is added to the file name each day.
View 14 Replies
View Related
Jan 7, 2009
I am trying to create a template application where the user will use buttons to show the open file dialog box and select two files, and I want these files to open in the same workbook, in different sheets.
View 6 Replies
View Related
Jan 10, 2009
What I am trying to do is set up a few command buttons on my userform that will allow the user to open a specific folder, browse, and then open the file of their choice.
Is this possible?
View 14 Replies
View Related
Aug 4, 2009
I have created a Spreadsheet that does all of the calculations, analysis, graphs, etc. that i need; however every time I wish to use this spreadsheet I need to first open up a spreadsheet with data, copy it and then paste it into the original spreadsheet. While this is not horrible, it is quite tedious to do several thousand times.
Thus, I was wondering if it were possible to create a Macro that would open up all files in a specific folder, then select each one and paste the relevant data into my original spreadsheet. I know this possible for specific files; for example, I have created a Macro that will select files data.xls, dats1.xls, data2.xls, and paste these into the spreadsheet, but I was wondering if there was a way to generalize this so that it will simply open every file regardless of the name or how many files there are in the specific folder.
View 14 Replies
View Related
Jul 9, 2012
I have files stored at C:KLQ1. Some with .xls and some with .xlsm. Now I want to same all the files under C:KLQ2 with .xlsm extension. Then replace all the 2005 with 2006 in the saved-as file. Then close all the files in Q1 without saving and all the files in Q2 with saving. The following code is modified from somewhere but does not work.
Code:
Sub OpenCloseFile()
Dim i As Integer
Dim wbResults As Workbook
Dim ws As Worksheet
[Code]....
View 7 Replies
View Related
Mar 11, 2014
I have a prompt for the user to select a folder and then assign the path a variable. I would then like the VBA macro to open all files within that folder (no sub folders) that end in .xls.
View 3 Replies
View Related
Nov 28, 2006
I want open excel files in a folder with ascending order how can I do this,
Eg:- In C:6-11-28 folder there are files as F1.xls, F2.xls , F3.xls......
I want to open above files and get some data from each excel file
Folder name change as System date
View 9 Replies
View Related
Apr 30, 2007
If i have a folder with multiple csv files in it, all with different names can i get a macro to open all these files.
I know that i can if they are always the same name each time i run the macro but what i would like to do is to change the name of the csv files daily.
The reason is because i could have upto 50 different files a day.
So basically i'd like to click a button and open all the contents of the folder regardless of the name of the files inside.
View 9 Replies
View Related
May 16, 2007
What is the code to oepn notepad files?
Get error if uses code below:
Dim noteApp As Object
Set noteApp = CreateObject("notepad.Application")
View 9 Replies
View Related
Jul 25, 2007
The background is that I only use macros for a few limited files to save me some time spent on monotonous clicking. Well, yesterday I made three little macros that clear the info in three weekly files and save each with a new date (in preparation for me adding the new info). When I left yesterday, the macros worked as intended. I come in to work this morning, and each of those files now open automatically whenever I open any other file in Excel (just for the first one, nothing happens if I open a second).
View 3 Replies
View Related
Nov 28, 2007
I am writing to see if this can be done. I have a master file that I want to open up to 80 files in a directory. For example, if I select Janauary as the Master file month to process for it to open up all files lastname_firstname_Jan01_15 and lastname_firstname_Jan16_Jan31.
I want it to populate the Master file based on criteria set in column A for that file.
Also, two of the fields need to be a sum from all of the files.
View 9 Replies
View Related
May 8, 2007
i have this code below that opens a prn file. What i want it to do now is to open the next prn file within the folder. I want it to continue until it opens all of them in the folder.
Sub Macro1()
Dir ("D:FTP dataOrder Assessment*.prn")
Workbooks.OpenText Filename:="D:FTP dataOrder Assessment*.prn", _
Origin:=xlWindows, StartRow:=1, DataType:=xlFixedWidth, FieldInfo:= _
Array(Array(0, 1), Array(8, 1), Array(12, 1), Array(31, 1), Array(44, 1), Array(59, 1), _ Array(72, 1), Array(84, 1), Array(93, 1), Array(103, 1), Array(114, 1), Array(123, 1))
End Sub
View 9 Replies
View Related
Jul 28, 2007
How can I code a Macro in Excel to search in a preset directory and pull out, aka open/run a certain Adobe Acrobat .pdf file automatically? Is this even possible to code in Excel Macro or is it out of its scope of what Excel VB code can do?
Right now I have a very repetitive task where depending on the value of a certain field in Excel I have to search for the right/corresponding .pdf file and open it up do work in the .pdf as well as the Excel worksheet... I have to do like hundreds of this. So is there a quick way to code in Excel that a certain value will open a certain file named .pdf acrobat file? Can other programs/files be called upon and ran/started/opened from within Excel Macro?
View 2 Replies
View Related
Oct 2, 2007
i have a master file which needs to be updated by several other sourcefiles. I did a macro running from the master file which opens all of the sourcefiles one by one, copies the relevant info from the sourcefile to the masterfile, and closes the sourcefile, then moves to the other one. i know this is probably not the case, but the code below seems to behave randomly: sometimes it works, sometimes it bugs by saying file not found runtime error 1004:
Dim masterfile As String
masterfile = "Master.xls"
Dim sourcefile As String
CurrentWeek = InputBox("Enter current week number")
CountWk = 35
sourcefile = "Source" & CountWk
Workbooks.Open (sourcefile)
....
The last statement causes the error. Both master.xls and source35.xls are in the same folder.
View 5 Replies
View Related
Oct 12, 2007
I have a folder with several downloaded payroll files. I want to write a macro in my "excel payroll converter" file which will selects and opens the last file downloaded. (So I can copy and paste it into my payroll converter.)
View 9 Replies
View Related
Sep 6, 2008
On a daily basis I open about 35 text files in Excel at one time, and then must responde to 35 dialog boxes:
"This file is not in a recognizable format" - I click OK
"Delimited or Fixed Width (default)" - I change to Delimited
"Delimiters listed with Tab as default" - I change to Space
I go through that 35 times. I don't save these files that I have opened, but once they are all open I paste each one in a separate worksheet in one workbook.
Can I at least change the defaults on these text boxes to Delimited, Space? That way I would just need to click on OK, then Finish for each file.
I am using Excel 2000.
View 9 Replies
View Related
