Macro To Open Specific Files And Copy Data From Week Number Sheets
Jan 8, 2010
What im trying to do is have a macro that will open a file called Blue 1.xls in location "I:SchedulesBlue" and then copy data from cells N13:034. Then paste it into another excel file (Press.xls)on worksheet "Press Break" cell G14.
The data that is copied not always fills up the cells N13:O34 so I need it to go to the next blank cell in column N and paste the information from file Blue 2, and so on for Yellow 1, Yellow 2, YellNR, and Green.
So to summarise I need a macro to open 6 files copy data from the same location on each of the files(N13:O34) then close and paste it into a master document(Press.xls) worksheet "Press Break".
There's one sheet that has a list of customers (this is updated very frequently). These customers are either ‘New’ or ‘Existing (as listed in a corresponding column) - would it be possible to have a macro that, when run, will place a copy of existing customers into a second worksheet (“view list – new”), and a copy of new customers into a third worksheet (“view list – existing”), with the main worksheet still listing both existing and new customers.
As the main sheet that lists all customers is updated very frequently (with customers being added and removed throughout the day), would it be possible to clear all contents of the other two sheets that each list of 'existing' and 'new' customers will be copied into, before the two lists are copied into each of the two sheets (just to ensure there isn’t any data in there from the previous time each list was copied in).
I’ve given this a go via the ‘record macro’ function - some users of this WB use excel 2000, and others use excel 2007, but it only seems to work on excel 2007 (which is what it was recorded on)…
I am new to VBA & not sure of the full understanding of code copied from a workbook which worked on the same principle but with Monthly (12) tabs. I thought if modified to show weeks, the macro would be able to locate the current week tab & day/date within - but upon opening, the cell stops at WK19 & column O - rather than WK43, Column N (which changes daily).
I am trying to write a macro to open a specific file (i.e site 1) and copy a range and paste that data into another workbook (Comparisons).
I can manage to write the macro to do this one by one, but ideally I would like to write some sort of loop macro that will go down a specific range of files (column A), listing the copy range (column B), and where to paste (column C) until it hits a blank row.
That way I do not have to keep re-programming my comparison spreadsheet every time a new site opens.
Simply trying to copy data from one worksheet to another. The source sheet is an excel file exported from an Access table. I recorded the macro using the recorder in Excel because I am no programmer, but when I try to run the code, I get this error:
"Code execution has been interrupted" ...and the Range I tried to select in the source file is highlighted by the Editor.
Is the source file protected somehow?
My ______________________________________________________________________________
The are two types of workbooks in C:Parts & SVC Sales "Parts Sales" and "service Sales" . The branch name is at the beginning of the file name
Instead of opening up each file individually in C:Parts & SVC Sales and selecting the appropriate csv file in C:/extract using the Update_Macro, I would like the macro to open up all the files in the directory C:Parts & SVC Sales and update each of these with the appropriate csv file in C:extract
The name and description type must match the csv files and then updated eg Br1 Parts Sales to be updated with csv file Br1 Salesperson 01-07-2014 (the date in the file is not important for match the parts file -the branch name for eg BR1 and "salesperson is) i.e Br1 Parts Sales must select BR1 Salesperson 01-07-2014
BR1 Service Sales Must be updated with Br1 Service order repair register.csv (branch name for eg Br1 in this instance name and Service order repair register (pertain to Service Sales) is important)
Br2 Parts Sales to be updated with Br2 Salesperson Br2 Service Sales must be updated with Br2 Service order repair register etc
I am trying to create a macro that will copy data from one sheet to four other sheets depending on some requirments in the data. I have a main worksheet that will store the data, the name on this sheet will change daily, so you cannot use a "named" sheet in your macro. The other three names of the sheets are "Esky", "Indy", "Gfld", and "Other". When copying the data, I need to copy the entire row of data to the required sheet. The data comes in such as:
Based on the FIRST TWO characters in the first column, I need to copy the data to the specific sheet. I would assume a simple LEFT() function would work for this. Here are the requirments for each sheet:
Esky - "MZ" or "51" Indy - "IZ" or "Z" or "21" Gfld - "PZ" or "22" Other - Anything else
I have a requirement to search workbooks in a particular folder with specific string in file name. For example, let us assume I need to find a file which contains the name 'RR' in it. The position of 'RR' will vary with files i.e. 'RR' might be present either in the beginning, middle or at the end of file name. All I wanted is to search for file with 'RR' and do some activity and close the file and then goto next file. Similarly, the next search has to be performed with the files containing the name 'BB' in it.
I have a workbook with the following sheets i do not want to hide called "Detailed Template", "INTERFACES", "STATUS".
I then have a number of worksheets which have their names as cell addresses i.e. "E4", "E5", "D4", "F4", "G7" and so on.
I would like to hide all worksheets (except the 3 mentioned at the top [which are sheets 1-3]) and any which contain say the value of '4'. This value is defined by a cell in the "INTERFACES" worksheet say 'A1' for example.
I want the macro to be able to automatically do this for which ever value is in 'A1'. So if it were to change to '7' it would hide every sheet that doesn't contain '7' in the name.
VB: Sub openfiles()Dim Path As String Dim ExcelFile As String ' Path = GetFolder("C:UsersKinteshDesktop") Path = "C:UsersKinteshDesktopVBA programmingMaps" ExcelFile = Dir(Path & "*.xls")
[Code] ....
NextCode: GetFolder = sitem Set fldr = Nothing End Function
My problem is that the code all actually works (including the function and when I use the commented part), but pointing to this one specific directory (the one I'm using right now), literally nothing happens.
I'm trying to find a way to use a macro to extract data from a specific column from Sheet1 based on the columns header/title and copied into Sheet2 into the respective column with matching header/title.
For instance, in Sheet1:
Chicken Cow Donkey Pig
[Code]....
So the above table would be the result i'm aiming for.
NOTE, its not different workbooks. I'm looking for sheet to sheet macro.
I've attached a file as well if someone wants to have a go at it. There are no codes in it.
I have a work book with many sheets and staff continue to mess this up so I would like to know how I can have a specific sheet called Instructions open when this workbook is opened preferably no macro's is this possible
I have a workbook that will need data from another which will be located in the same directory. I need to open this workbook however the filename will be imported daily and be different each time (i.e. 010707.xls, 010807.xls, etc.) The only two files residing in the directory will be the active file and the one that needs to be opened. Is there a way to assign a variable for the 010707? Currently I have the following and need to manually modify the file name: Workbooks.Open Filename:="C:My Documents emplate10707.xls"
I've come across the post by Dangelor but can't reply to it directly so have started a new thread quoting the code. I'm trying to select entire rows of data based on specific values in a column and then paste those rows to a new worksheet. This code loops 10 times and creates 10 new sheets. Any chance someone could explain some of the code to me and adapt it to suit my situation?: Data will be in sheet 1 ("Data List"). I want search down the rows and if the value in column 2 is "1" copy that row to the sheet named "Heat 1", if the value is "2" then copy that row intt the sheet "Heat 2", etc.
Sub FindandCopyRows() Dim Data As Variant Dim DataFound() As Variant Dim iValue As Integer Dim j As Long Dim i As Integer Application. ScreenUpdating = False For iValue = 1 To 10 With Worksheets("Main") 'change name as needed .Select Data = .UsedRange.Value End With Redim DataFound(1 To UBound(Data)) For j = 1 To UBound(Data, 1) On Error Resume Next......................
I'm just starting out on my journey into VBA and this forum has been a valuable resource for picking up hints and tricks
I've decided to cut some corners and ask for help for the final piece of my current jigsaw - effectively this comes in two bits.
Part one:
I want to copy a sheet from two open workbooks and paste them into my active wookbook. Both source workbooks only have one sheet. I want a dialogue box to select the desired workbook, select and copy all data and then paste to a specified sheet (replacing the current data) in the destination workbook. I then want to select the other source workbook from the dialogue box and copy all data to a separate sheet in the destination workbook. I would like the dialogue box to have two options - Ok to select, copy and paste data, Cancel to end the macro.
Part two:
I want to copy a sheet from my source workbook and paste it as a separate sheet in a new workbook (a one page workbook would be ideal). I then want to save the new workbook in a specified location as "Data - Date" in the format 2009 02 12.
I want to know if its possible to write a macro that will prompt me to open a document, then once open it will copy data and paste it into the working spreadsheet. I have a mini macro that cuts and pastes data elsewhere in the sheet but at present I am manually opening a file then copying all and then pasteing the data which is rather slow.
I have 3 workbooks open. 1 is my working file and I name it as "Final[date].xlsm". The other 2 files are my source files which are also open are named as source1.xlsx and source2.xlsx. Both the source files has only one tab/sheet as "Sheet1". My objective is to bring the contents of the source file to my working file in 2 different sheets. all the contents in Sheet1 of "Source1.xlsx" should be paste.values only to the "Final[date].xlsm" with a sheet name "BankDetails". This will enable the user also to replace the old data in "BankDetails" tab. The "source2.xlsx" sheet1 has a different situation. I need to copy only the cells with values, not the entire cells, because it has to be pasted (values only) to range C2:L. I have formulas in the other columns before C and after L.
Take note that my working file name is changing every based on the date while my source file has always same file name.
Can a cell have a calendar button - for user to choose a date, and also have data validation? (so far I've played with validation, haven't found how to include calendar).
I would like to validate that the chosen date is at least TODAY+14, but also is a Saturday - is there any validation which will provide this?
I’m wondering if this is possible, if I have a folder with say 30 excel spreadsheets (.xls) all named differently (number of files will always change), can I easily write something in VBA to Open all the spreadsheets and copy each sheet over to an existing Excel spreadsheet? For example, have a ‘template’ spreadsheet where the VBA would exist, then have the first sheet, (Sheet1) of each 30 sheets be copied back over to the template.xls? Even better, could I rename each Sheet1 to the name of the file before copying it over? This would basically be the first step in my process of getting the spreadsheet made.
I found this code in a similar question, so how can I rename the Sheet to the opened file name, then copy that over to template.xls?
I am interested in modifying the below code so that instead of a text output of "Assignment A (20), Assignment B (5)" it would output only the sum of the numbers "25" for the corresponding week. I believe that this will be more clear with an example, so I'm attaching a small sample which shows what my current output is and what I'd like it to be.
Private Sub RestructureHrs() 'Start of Restructure Dim l As Long ' loop through rows Dim m As Long 'loop through rows to find last occurrance of person Dim lLastRow As Long Dim sPerson As String Dim sOffice As String Dim j As Long 'loop through person Dim k As Long 'loop through weeks Dim sOutput As String Dim sOutputPerPerson As String Dim lNextRow As Long lLastRow = Range("A" & Rows.Count).End(xlUp).Row lNextRow = 2 For l = 2 To lLastRow sPerson = Range("B" & l).Value sOffice = Range("A" & l).Value sOutputPerPerson = ""......................
I have found out how to creat a new folder, and now what to copy specific files over to this file from a different Directory. Does anyone know how to do this?
&
How to place todays Date at the end of this New Folder?
I have two workbook having 8 worksheet each. Every day I need to copy data from previous day worksheet and paste it on new workbook with same sheet name.
For example :- Workbook1 is having sheet named aa, gg, tk ..... Workbook2 is having sheet named as same as Workbook 1
Now, I want macro to copy data from Workbook1, sheetname 'aa' and paste the same in workbook2 in sheet name 'aa' and likewise
how I might 'trigger' a macro to run when a certain cell was filled with any value at all. I have the macro working fine (it's a simple copy and paste special) but I want it to run automatically when the cell A20 has a value in it.
How can I code a Macro in Excel to search in a preset directory and pull out, aka open/run a certain Adobe Acrobat .pdf file automatically? Is this even possible to code in Excel Macro or is it out of its scope of what Excel VB code can do?
Right now I have a very repetitive task where depending on the value of a certain field in Excel I have to search for the right/corresponding .pdf file and open it up do work in the .pdf as well as the Excel worksheet... I have to do like hundreds of this. So is there a quick way to code in Excel that a certain value will open a certain file named .pdf acrobat file? Can other programs/files be called upon and ran/started/opened from within Excel Macro?
I have a requirement to create a master spreadsheet using a macro to copy set cells from several other spreadsheets and paste them into the master one in a list for accounting purposes.
So far the macro reads in the spreadsheet filename(s) and copy/pastes the cells to the master one - I need to be able to paste the values onto subsequent rows for each input sheet which is where my problems lies. Currently the row just pasted in is overwritten over by the following one, I need to go to the next row down but am stuck on how to do it.
Sub EmployeeExp() ' ' EmployeeExp Macro ' Macro recorded 12/02/2008 by eugene.cross ' Dim i As Integer Dim f As String
I've attached an example master output sheet to show what I want to produce, albeit this has only one row!
