I want to open the workbook "Invoice.xls" from the path: D:2008DecemberWorkflow
After opening this workbook, I would like to go to the sheet "Raw Data" and then copy the entire Raw 10. And close the workbook.
I have created a spreadsheet some time ago and have been asked to improve on it but I'm rusty with VBA.
I have an automated ordering system that saves each sent order as the date e.g "05-04-2013.xls" but the management team want a graph with the data for the last 4 weeks compared. I have created a seperate workbook called "consumables report.xls" which has a column with the products listed followed by columns "Quantity" and "cost" which is repeated for the 4 weeks of the month.
I want to add a button to prompt the user to choose the saved order e.g "05-04-2013.xls" (all orders saved in same directory) to copy and paste the quantity and cost columns (c8,D69) into "consumables report.xls". I got this to work earlier but it would only paste the formulas and not the values. So I need
A prompt to open workbook
Copy range (c8,d69)
Close work sheet
Paste special .value (c8,D69)
I dont care if it has to open the workbook to copy the data as this will only be used once a month so it dosnt matter how slow the code is.
week 1 week 2 week 3 week 4
Product
quantity
cost
quantity
cost
cost
quantity
cost
1
2
3
4
5
6
7
8
I am trying to AVERAGE an Open-Ended (entire) column, while keeping the first 4 cells, "Out of the loop!"
Example:
=AVERAGE(E:E) less cells E1 through to E4, inclusive.
I want to copy entire sheet from one workbook to another, my code is failing in this line.
Workbooks(Path).Sheets(i).Copy Destination:=Workbooks(Original).Sheets(i + 1).Range("a2")
Create a full copy of an open workbook (eg. activeworkbook MyFile.xls) using VBA, with the new copy (eg Book1.xls) open as well ,without having to save a copy first then open it ?
View 9 Replies View RelatedI need the macro to look at cells B9:B84 on the Sheet1 tab of the Cost Template. If it finds an x I need it to copy the 3 cells to the right of the x and paste them in a template. For example if it sees an x in cell B9 it would copy cells C9, D9 and E9, open the Purchase Order to the Detail tab, then paste it to cells B3, C3 and D3. It would continue looking for an x down to B84. So if it found 5 cells with x, it would give me 5 instances of the Purchase Order with 3 cells pasted into each.
I've attached my Cost Template and the Purchase Order it needs to copy to. In the Cost Template is a macro called Create_PO. This is what I was trying to alter to make this happen. I can't seem to get it right! FYI in case it matters, I had to change the Cost Template from .xltm to .xlsm in order to upload it on this site.
I need a code that will search column A over multiple sheets for a user specified value through an input box. I then need this code to copy and paste the entire row to a new workbook titled "Batch Report" Anyone have any ideas? I have a code that will copy and paste only a few rows but no where near all of them, and I cant figure out why.
View 10 Replies View Relatedway to copy the entire row of data from one worksheet into another, within the same workbook, based on the criteria "Responsible." Here is a sample of the data: ..
View 9 Replies View RelatedI've created an Excel 2007 workbook with about a dozen worksheets that are full of formulas and links to other workbooks, as well as conditional formatting that isn't backwardly compatible with Excel 2003. However, many people who want to see this workbook are still on Excel 2003. I need to recreate an Excel 2003 compatible workbook with the appearance and formatting of the original and have all the formulas and links converted to values. So, the final product will "look" just like the original without the conditional formatting, links or formulas. It will just have the look, colors and values displayed for all cells.
Essentially, I want a macro that will copy however many worksheets (1-n) are in an Excel 2007 workbook to a new Excel 2003 workbook. I'd like the worksheets to retain their label names as well.
Copy data from workbook, open existing workbook, select range and paste. But my copied data is lost.
Sub Select_Copy_Paste()
'
'
Windows("ElektroFunctiesDatabase.xlsm").Activate
Sheets("PowerSupply's").Select
Range("A2:I6").Select
Selection.Copy
[Code] .........
' Here i need to do something to paste data into r.address?
I have 2 workbooks, one is my source of data and the other is the destination workbook. What I need to do is to copy the row data when the checkbox is marked and the criteria was met to the destination workbook. I have the code below:
VB:
Sub CheckBox5_Click()
'uses formulas in an empty column to spot all appropriate rows at once
Dim LR As Long, NR As Long, wbMASTER As Workbook, wbNAME As String
wbNAME = "C:UsersPublicDocumentsSPOT_MB.xls"
[Code] .....
What I want to do now is to :
1. Create a checkbox that will run the code to copy the row when the criteria is met to the next empty row of a master file.
2. Keep the master file open while the data is updating.
I run a model in Excel that automatically saves my file every xx iterations. After saving the file I want to make a backup of the file. Tried
[Code] .....
but get a permission denied error message.
I don't want to use .SaveAs as it is a huge file that takes a while to save and SaveAs has a tendency to break links that should not be broken..
Here's my macro:
Code:
Sub CopyRow()'
'Copies row to new sheet, highlights it, marks column 'A' as copied.
'
Dim cCell As Range
Set cCell = Selection.Cells(1, 1)
Selection.Copy
Sheets("Sheet2").Select
Rows("2:2").Select
[Code] .....
Is it possible to modify it to paste into a different workbook called c:filesDestination.xlsm, instead of the existing workbook (Source.xlsm)? The destination sheet name is the same (Sheet2). It's OK if both workbooks are open at the same time.
I'm trying to write a macro that accomplishes the following:
" Book 1" is already open. The user runs a macro that lists all .xls files in directory "d:measurements" The user selects the desired file from the list or box the macro copies from this "book 2" " sheet 3", " range A6:I107 and pastes (values only) into "book 1", "sheet 5", "range A6" End of macro.
I want to accomplish this without opening the selected file (book 2)
way to search for a value in a cell (an unique one) using an input box and then if the value is found copying the whole row of the cell onto a new worksheet in the next available row within a table.
I am currently using the following archaic codes:
x$ = InputBox("Please Enter Catalogue Number")
For i = 4 To 500
If Sheet2.Cells(i, 1) = x$ Or Sheet2.Cells(i, 7) = x$ Or Sheet2.Cells(i, 8) = x$ Or Sheet2.Cells(i, 9) = x$ Then
Sheet1.Cells(6, 1) = Sheet2.Cells(i, 1)
Sheet1.Cells(6, 2) = Sheet2.Cells(i, 2)
Sheet1.Cells(6, 3) = Sheet2.Cells(i, 3)
Sheet1.Cells(6, 4) = Sheet2.Cells(i, 4)
Sheet1.Cells(6, 5) = Sheet2.Cells(i, 5)
Sheet1.Cells(6, 6) = Sheet2.Cells(i, 6)
End If
Next i
End Sub
this has the problem that i can't fit it to the next available row and have to be specific for each row.
it would also be great if i could put a messagebox in cases where the data is not found, basically saying that the item does not exist and if a simple excel Ctrl+F button or something similar could be attached to the msgbox so that the item can be searched and then added to the next available row.
I have a spreadsheet that contains data that needs to be copied over to a new worksheet if it contains a Date. For instance, if a Date exists in column F on worksheet1, I want to copy the entire row's contents from worksheet1 to the next empty row on worksheet2.
As it stands now, the data ends on row 67 in worksheet1 and ends on row 221 in worksheet2. So, if there is a date in F30, I would like to copy all of row 30 and past it into row 222 on worksheet2.
I need a formula to check sheet 1 column N and to copy the entire row if the cell in column has the word NO.
The row has to be extract in sheet 3.
I am trying to write a piece of vb code that opens a workbook and enters some data into it, saves it as a different file name and closes it.
Basically, I have a worksheet with two sheets. One is a list of a few values (order number, description, date), the other has three cells which the user enters the values into, and a command button. When pressed it transfers the data into the table on the first sheet.
I then need it to open a workbook C:/ewr.xls and put these values into this, rename it as ewr180.xls, (where 180 is the order number) and save it
I'm almost there but just cant seem to get the values into it
I know i must be missing something so simple, any help would be much appreciated.
Private Sub createEWR_Click()
Dim ewnnum As Integer
Dim descr As String
Dim ewndate As String
' enter new row with data
I am trying to copy the entire row based on values in column A. I have 13237 rows of data. Column A is grouped into about 200 categories with corresponding data in B-F. I would like this to automatically copy the data into new tabs based on the groups in column A. I would also like the tab to be renamed to the value in column A.
M195_-_Subinventory_Item_Locato ABCDEF1LocatorItemSERIAL_NUMBERLOT_NUMBERON_HANDUOM201
.REEF..22700300100 228136EA301.REEF..22643400000 331122EA401
.REEF..K20-745-000 531124EA501.REEF..K20-618-000 531132EA601
.REEF..22747300000 1122111EA701
[Code] .........
i need a macro that will allow an entire row from one sheet be copied into a new sheet.
so basically here is what needs to be done:
1. from my active sheet, look in Column 'D', select all rows in in column D if it has the word "Confirmed" in it
2. create a new sheet and paste all those selected rows to this sheet
3. delete this transfered data from sheet 1
4. in the new sheet, i need to add in titles as follows in columns A - O:
Ticket
OrgCode
Event
Event Status
Project Type
Project Status
Start Date
End Date,.....................
I know that the line in my code Worksheets.Copy is NOT what I need to have to make this work, but with it it's the closest I could get to what I want.
I want the user to be able to click the SAVE command button, be allowed to either accept or change the default save options, save the current workbook and then go right back to the form that has the SAVE command button. Sounds simple, I know, but when you don't know the right commands to save the WORKBOOK, not just the WORKSHEETS, it becomes a P.I.A.
I know there's a lot there, but here's my code, which is just a slightly altered version of the code by Ron de Bruin:
Private Sub SaveData_Click()
'If no date has been selected then don't allow SAVE
If PubDateLabel.Caption = "" Then
MsgBox "Publication Date not set. You must select a date before saving.", vbCritical, "No Publication Date!"
Exit Sub
End If
I am trying to find a way to copy the contents of an entire row to a new sheet in a workbook based on the value of a column, specifically column K with the value of "good". There are 3 sheets that im searching. This is where I run into problems. Im looking to start with sheet1, and copy all rows deemed "good" into entries on sheet 4. Then search sheet2 and copy all relevant entries into the next available row on sheet4, and then repeat on sheet3.
View 2 Replies View RelatedHow to copy an entire column having numbers and words on every single cell into another column but only copying numbers, not words.
View 9 Replies View Related I would like to copy all the items below the ITEM row and paste it to cell A2 of another saved workbook (say, Saved.xls).
If Saved.xls is closed, the macro would open it and paste. If it is open then it will just paste.
I'm trying to do something which I believe is simple but my lack of VBA knowledge is getting in the way. How do I open 2 workbooks then copy a sheet from 1 workbook to another?
I can get the workbooks open just can't copy the sheet across? I get a run time error 9, subscript out of range message on copy sheets code
Code:
Private Sub CommandButton1_Click()
'locate file via range and open the document'
[Code]......
how to go about taking data from a closed workbook with a range say A1 to A100, and place it in the work book i have open. I have 3 different sheets in the open work book but all the data is coming from the one sheet in the closed workbook.
View 9 Replies View RelatedI have a VBA-coded macro in an Excel workbook that is to open another existing workbook -- a .xls file, not .csv -- copy data from it, paste that into the original workbook where the macro resides, then close the source workbook.
If I use the debugger to step through the macro -- putting a breakpoint at its first executable line, run the macro, then F8 step through it, it works fine. (With delays at the open, close statements.) Free running, it doesn't. I suspect it's a timing issue, that the macro runs full tilt even though the new workbook isn't yet open -- but I don't know how to remedy that.
Here is the situation and the simplified code (the actual macro does a lot more, of course):
Main workbook: Two sheets, "Parameters" that has the fully-qualified filename for the desired source .xls in A1; and "Data", into which I want to paste data from that source.
Source workbook: Single sheet, "Sheet1"
Macro code. For simplicity, it is trying to copy/paste all of the source worksheet's content:
Sub Go()
'
' Go Macro
' Test of getting data from another spreadsheet
'
' Keyboard Shortcut: Ctrl+Shift+G
'
Dim SourceFile As String
Dim HomeBook As String
Dim OtherBook As String
Sheets("Parameters").Select
SourceFile = Range("A1").Value
HomeBook = ActiveWorkbook.Name
right after the open, hoping that might cause a dwell for the open to complete.
When I step through it, the Locals view has all the parameters, getting set properly. If I try to simply run it, it stalls at the opened source workbook, the Locals view is empty, no data has been transferred into the initiating workbook.
If I place the breakpoint after the open, it is not reached. (I have the VBA open.) Hitting F8 then yields a VB error window, "Compile Error" "Expected: To"
I have an Excel database of department contracts with a Master worksheet. I have created a worksheet tab for each of the departments. Column G has a dropdown list for each department. When I enter a new contract onto the Master I want it to auto copy to the coordinating worksheet based on the selected department.
If possible I would also like it to enter the newest contract would enter into the coordinating Contract Party entered into column D. (ie... If Hospital A is entered in column D on master, the new entry on the worksheet being copied to will be entered under the last Hospital A, if Hospital B is entered on Master it copies under Hospital B). If this isn't possible then I am not too worried about that part.
I have attached a blank version of the file. Current Master 5-15-14.xlsx
I have 3 workbooks open. 1 is my working file and I name it as "Final[date].xlsm". The other 2 files are my source files which are also open are named as source1.xlsx and source2.xlsx. Both the source files has only one tab/sheet as "Sheet1". My objective is to bring the contents of the source file to my working file in 2 different sheets. all the contents in Sheet1 of "Source1.xlsx" should be paste.values only to the "Final[date].xlsm" with a sheet name "BankDetails". This will enable the user also to replace the old data in "BankDetails" tab. The "source2.xlsx" sheet1 has a different situation. I need to copy only the cells with values, not the entire cells, because it has to be pasted (values only) to range C2:L. I have formulas in the other columns before C and after L.
Take note that my working file name is changing every based on the date while my source file has always same file name.
Code, couldn't make it work with VB HTML Maker. I'm new with VBA Basically my idea is when someone open default file, insert data, try to save file, macros save workbook with inserted data as another file (*.xlsx) and make pdf in another folder. Pdf part is working fine, but with second part just can't find right option.
Pdf part
Private Sub Workbook_AfterSave(ByVal Success As Boolean)
Dim Name As String
Dim i As Integer, j As Integer
Name = ThisWorkbook.Path & "PDF Archive" & ActiveSheet.Range("F6") & " Invoice " & ActiveSheet.Range("B11")
[Code]...
Excel part
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)
Dim ActSheet As Worksheet
Dim ActBook As Workbook
Dim CurrentFile As String
Dim NewFileType As String
Dim NewFile As String
[Code]...