Match Criteria And Then Copy Entire Row To Another Workbook Using Checkboxes
May 22, 2013
I have 2 workbooks, one is my source of data and the other is the destination workbook. What I need to do is to copy the row data when the checkbox is marked and the criteria was met to the destination workbook. I have the code below:
VB:
Sub CheckBox5_Click()
'uses formulas in an empty column to spot all appropriate rows at once
Dim LR As Long, NR As Long, wbMASTER As Workbook, wbNAME As String
wbNAME = "C:UsersPublicDocumentsSPOT_MB.xls"
[Code] .....
What I want to do now is to :
1. Create a checkbox that will run the code to copy the row when the criteria is met to the next empty row of a master file.
2. Keep the master file open while the data is updating.
My sample.xls have 11 columns and 6 rows ("for now" as the user might update this.) first row is the header, column G,I,K are the option if the data is to be copied to new workbook. there are 2 command buttons (1) Copy to New Workbook (2) Clear Columns G,I,K. what i want is to analyze each row using Macro, if there is/are selected cell in that row then copy the header, columns A-E, the selected cell and the unselected in that row must have a value "0" in new workbook. if one row have no selected cell then skip it. "Sheet2" in sample.xls is the sample output that i want to see in new workbook.
Random values will be pasted into sheet1. I a looking for a macro that will look for a match to the values in sheet1 column A in Sheet2 Column A. When a match is found it will paste the entire row from Sheet2 to sheet#3
See the example. Note: the match will always be an exact match.
I need a code that will search column A over multiple sheets for a user specified value through an input box. I then need this code to copy and paste the entire row to a new workbook titled "Batch Report" Anyone have any ideas? I have a code that will copy and paste only a few rows but no where near all of them, and I cant figure out why.
way to copy the entire row of data from one worksheet into another, within the same workbook, based on the criteria "Responsible." Here is a sample of the data: ..
I've created an Excel 2007 workbook with about a dozen worksheets that are full of formulas and links to other workbooks, as well as conditional formatting that isn't backwardly compatible with Excel 2003. However, many people who want to see this workbook are still on Excel 2003. I need to recreate an Excel 2003 compatible workbook with the appearance and formatting of the original and have all the formulas and links converted to values. So, the final product will "look" just like the original without the conditional formatting, links or formulas. It will just have the look, colors and values displayed for all cells.
Essentially, I want a macro that will copy however many worksheets (1-n) are in an Excel 2007 workbook to a new Excel 2003 workbook. I'd like the worksheets to retain their label names as well.
I am trying to write a code to copy rows from sheet 1 to sheet 3 if cell of column A "account #" on sheet 1 are matching cell of column A (account #) on Sheet 2. If multiple entries find on sheet 1, (e.g. acct # 101c shows twice) copy all matched rows to sheet 3 as well.
I'm trying to make a macro that would match the text in a cell of a Workbook #1 to the name of a worksheet in Workbook #2 and if so would copy that worksheet to Workbook #1.
So if cell A1 was named "red" in Workbook #1 And there was a worksheet in Workbook #2 named "red"
Then it would copy all of worksheet "red" to workbook #1.
I did a search to find a question similar to mine and I found this: Copying data matching a criteria into another spreadsheet
This is exactly the same concept I am trying to accomplish, but don't know how to...at all. I couldn't follow the thread either.
I have a schedule which is constantly being updated (simplier version attached). I want to create a schedule, which will: 1) First ask which region to display the information for (I would like to create the same pop up menu to choose from) 2) Then, it will select only that region's information (all rows & columns) and copy them into a new worksheet and lists it all -if you go back to the Master List, you can again choose another Region and it will create another new worksheet with that region's information 3) Don't know if this is making things more complicated, but at the bottom of the attached file, there are 3 lines under "Land".
Is it possible to list these under the same spreadsheet as the region it is pertaining to but classify it separately under "Land" (ie leaving space, so it is clear this is separate
I have two workbooks.masterdata.xls (M: estmasterdata.xls)emp1.xls (M: estempFilesemp1.xls) Workbook emp1.xls has one worksheet- same name as workbook(emp1). In first (masterdata.xls) workbook I also have worksheet name (emp1). What I am trying to do is transfer all data from (emp1.xls, worksheet "emp1") to worksheet "emp1", which is in masterdata.xls workbook.
I have been struggling to setup these two workbooks for a bit now, and I can't for the life of me figure out a formula to do what I need to do. Essentially, I have one workbook that contains a list of purchase records for my company, sortable by Date, Vendor, Price, etc. and one workbook that has a sheet for every vendor. What I need is a formula that will search column B for a vendor, Allied Waste for example, and transfer all the information within the rows for every instance that vendor is found to the new workbook.
This is basically just a way where I can input information once in one workbook, where the sheets are divided by month, and the info will automatically transfer to another workbook, where the sheets are divided by vendor.
i need a macro that will copy data according to criteria to another sheet within the workbook,
Raw data is in Sheet "Workings" from range A1:L,???? (not fixed), i need the macro to filter Col b and look for string CBA, CITIAIMS, MIR ASIA, STATE STREET, CITIBANK, REG then copy all data relating to these string to Sheet- " Cash_To_External_Custodian"
When pasting data to "Cash_To_External_Custodian", i would like the macro to paste to the required columns as per my screen dump below, as you can see i want the macro to skip Col b ,Starting Range is A6
Cash_To_External_CustodianAccount Code Case RefCustodianSourceValue DateBreak DateAgeSideCCYLedger AmountStatement AmountAmount DifferenceError TypeQLGACITIAIMSDES21-Oct-0821-Oct-08-6SCRAUD0.0063,115.1163115.115647366QLGSBQLGACITIAIMSDES22-Oct-0822-Oct-08-7SCRAUD0.0011,665.0311665.035649060QLGSBQLGACITIAIMSDERIV28-Oct-0828-Oct-08-13LCRAUD100,000.000.00-1000005661452QLGACITIAIMSDES28-Oct-0828-Oct-08-13LCRAUD18,274.880.00-18274.885655105
I have a workbook that is used to track job estimates.
What I would like to have is a macro that would search through column N on the original file and if any of the cells have "No RFE" in them - generate a new workbook with only this list that would include any data from columns C-U copied from the original file.
I've been seaching the forum, but so far have had little luck finding something that suits my needs.
I have a workbook with many (25) worksheets which all have the same structure, column headings, etc. but vary as to the number of rows. I would like to search all worksheets in workbook and copy to worksheet "120" only those rows where column C is "120" and column E is "1-00053-".
Ideally, input boxes would be used to enter these criteria so that it can be used for different scenarios in which these values will vary.
The project is the create checkboxes out of the tab names in a workbook. After that, create a new workbook with the selections made. It is at the point where I pass the array of sheets to be copied that the error occurs. The only thing I can figure is that my variable curWB is not what I think but I declare it to be the original workbook before that point. All of the code is below.
Another possibility is that this code with some other code sits in the worksheet called index. This sheet is being copied to the new workbook also.
VB: Private Sub CommandButton2_Click() Dim oleObj As OLEObject, ole As Object Dim sheetSelection() As String
how to insert a checkbox into cell I4. I'd like to drag/copy the cell all the way down the column, but it doesn't work this way. How can I do that without individually copy/pasting into each cell?
Better yet, is there a way to make a check box appear only if there is content in the row? This is a spread sheet where I add one or two rows per day. For example, if there is content in B25, make a check box appear in I25? That would help keep the spreadsheet clean.
I have checkboxes in N85:N100 and O85:O100. When I use the following code, it gives the same link in N85 and O85. How can I put a specific rannge so that it will only do N85: N100 and then do O85:O100.
Sub change_forms_checkbox_links() Dim mychkbox As CheckBox Dim wks As Worksheet Set wks = ActiveSheet
I am working on a form that has 150 lines with address and then a check box in the row to indicate that something has been done. I have linked that to another cell so that I get a true false. I will then be setting it up to count the true false so that it will keep counts for me. The problem that I am having is when I copy the row down all the check boxes in the column are linked. I check one and the rest become checked. I don't want to have to individual add check boxes in for each 150 lines.
I'm developing a workbook containing 121 sheets. Sheet 1 is effectively an index, and uses 120 form control checkboxes to unhide and display the selected sheets individually.
The code I'm using for each checkbox is below and is in a module.
I am trying to use cells.find to find a cell containing "Date". However, it also finds cells with "Start Date" and "End Date" and any other instance of the word date. Is there anyway to make it match ONLY IF the cell contains EXACTLY "Date" and nothing else?
I written one code to delete Entirerow if value match. It's working fine .the code delete all match except one match.!
------------------------------------------------- Option Compare Text Sub delete_duplicate() Cells(Rows.Count, 1).End(xlUp).Select Range(ActiveCell, Range("A1")).Select For Each cell In Selection If cell.Value = "Already updated" Then cell.EntireRow.Delete End If Next End Sub -----------------------------------
I am using checkboxes in column A to allow customers to select inventory items. If the box is checked I want the data in columns B thru R to be copied and pasted to a new workbook for the corresponding row. The data should be pasted as values, but with all the same formatting. The column headers also need to be copied and pasted, they can be found in B8 thru R8. Before pasting to a new workbook a popup box should ask the user to click "yes" or "no" to paste the data to a new workbook.
Dim Bcell As Range For Each Bcell In Range("A10:A" & Cells(Rows.Count, 1).End(xlUp).Row. If Bcell.Value <> "False" Then Sheets("sheet3").Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Resize(1, 18).Value = Range(Bcell, Bcell.Offset(0, 8)).Value End If Next Bcell
The problem with the code above is 1. It is copying all columns A thru R (should be B thru R) 2. It is pasting all formulas (should only be pasting values) 3. It is not carrying over the formatting (cell formats should remain the same) 4. It is pasting the data to a new sheet (Should be pasting to a new workbook)
I have a multi-worksheet workbook that has many forms control checkboxes throughout it. I'm looking for some VBA that will change the background (fill) color of ALL the checkbox when it is checked (True). I've seen code for a single checkbox, but not multiple/all boxes. I know just enough VBA to be dangerous, but I'm up to learning anything new.
I'm trying to put together a script which on the sheet "Resource" compares every cell in the range B:U, starting at row 8, and where all cells match, keep the first row, but delete the duplicate proceeding rows.
I've found the code below here: [URL] ...., which I thought I may be able to adapt, but for me to include all the columns in the 'If.Evaluate' section of code seems to perhaps not the most efficient way of doing this.
I am trying to figure out how to write a program that will: Match the date in cell H3 (which will show the current date) with a range of dates in column A then once this date is found the entire row will UNLOCK or allow me to update cells with data from another excel worksheet. If this is unclear or I need to post additional information let me know.
I need the macro to look at cells B9:B84 on the Sheet1 tab of the Cost Template. If it finds an x I need it to copy the 3 cells to the right of the x and paste them in a template. For example if it sees an x in cell B9 it would copy cells C9, D9 and E9, open the Purchase Order to the Detail tab, then paste it to cells B3, C3 and D3. It would continue looking for an x down to B84. So if it found 5 cells with x, it would give me 5 instances of the Purchase Order with 3 cells pasted into each.
I've attached my Cost Template and the Purchase Order it needs to copy to. In the Cost Template is a macro called Create_PO. This is what I was trying to alter to make this happen. I can't seem to get it right! FYI in case it matters, I had to change the Cost Template from .xltm to .xlsm in order to upload it on this site.
Here is what I have. 4 Worksheets. The first worksheet is a summary page. I have 350 personnel that are broken down into three different groups. So each group has it's own sheet. Here is what I need to accomplish. Results need to be posted on the summary sheet.
I need to compare cells B2 & D3 for each row on a worksheet and display the number of times they match on a worksheet. For example how many times does EP & EP match on a certain row. I need to compare cells B2 & D3 for each row on a worksheeet and display the number of times they don't match on a worksheet. For example how many times does EP & MP occur. I've attached an example for reference
