way to search for a value in a cell (an unique one) using an input box and then if the value is found copying the whole row of the cell onto a new worksheet in the next available row within a table.
I am currently using the following archaic codes:
x$ = InputBox("Please Enter Catalogue Number")
For i = 4 To 500
If Sheet2.Cells(i, 1) = x$ Or Sheet2.Cells(i, 7) = x$ Or Sheet2.Cells(i, 8) = x$ Or Sheet2.Cells(i, 9) = x$ Then
this has the problem that i can't fit it to the next available row and have to be specific for each row.
it would also be great if i could put a messagebox in cases where the data is not found, basically saying that the item does not exist and if a simple excel Ctrl+F button or something similar could be attached to the msgbox so that the item can be searched and then added to the next available row.
Random values will be pasted into sheet1. I a looking for a macro that will look for a match to the values in sheet1 column A in Sheet2 Column A. When a match is found it will paste the entire row from Sheet2 to sheet#3
See the example. Note: the match will always be an exact match.
I tried to writer my code myself but I have a long way to go. Here is what I must do for my case:
I want a macro to find the row that include a specific text (For example "SMSC") in a range (A1:A100) then copy this entire row below the cell which has the value "OTHERS". That is, if there are 10 pieces of "SMSC" so these rows including "SMSC" should be listed below the cell "OTHERS"
I need the macro to look at cells B9:B84 on the Sheet1 tab of the Cost Template. If it finds an x I need it to copy the 3 cells to the right of the x and paste them in a template. For example if it sees an x in cell B9 it would copy cells C9, D9 and E9, open the Purchase Order to the Detail tab, then paste it to cells B3, C3 and D3. It would continue looking for an x down to B84. So if it found 5 cells with x, it would give me 5 instances of the Purchase Order with 3 cells pasted into each.
I've attached my Cost Template and the Purchase Order it needs to copy to. In the Cost Template is a macro called Create_PO. This is what I was trying to alter to make this happen. I can't seem to get it right! FYI in case it matters, I had to change the Cost Template from .xltm to .xlsm in order to upload it on this site.
I have a file that has simple stats for multiple days. At the end of each day is a "Summary" line. I can't figure out how to find the lines that have the word Summary in them and copy all the values in that line to another sheet. I've made a mock up of my data. I have minimal experience with Macros, but am learning quickly.
I have a macro that searches in all the excel files contained in a folder (weather files are opened or not) and returns the information (File name, Sheet name , Cell Address, and contents of the cell). I just want to amend the said code so that it copies not just the cell alone but" the entire row in which the cell is present".
My worksheet has two sheets which has daily continued data. I want to copy two entire columns E and F from Sheet 1 and then in Sheet 2 I want to find a particular word "80 Percent" and then insert two new Entire columns before that word. And after that I want to paste that copied columns of sheet1 in those newly created columns of sheet 2. Is it really possible because the cell reference of the word "80 Percent" in Sheet 2 will change daily. How to create the macro codes for this.
I have a spreadsheet that contains data that needs to be copied over to a new worksheet if it contains a Date. For instance, if a Date exists in column F on worksheet1, I want to copy the entire row's contents from worksheet1 to the next empty row on worksheet2.
As it stands now, the data ends on row 67 in worksheet1 and ends on row 221 in worksheet2. So, if there is a date in F30, I would like to copy all of row 30 and past it into row 222 on worksheet2.
I am trying to copy the entire row based on values in column A. I have 13237 rows of data. Column A is grouped into about 200 categories with corresponding data in B-F. I would like this to automatically copy the data into new tabs based on the groups in column A. I would also like the tab to be renamed to the value in column A.
I am trying to find a way to copy the contents of an entire row to a new sheet in a workbook based on the value of a column, specifically column K with the value of "good". There are 3 sheets that im searching. This is where I run into problems. Im looking to start with sheet1, and copy all rows deemed "good" into entries on sheet 4. Then search sheet2 and copy all relevant entries into the next available row on sheet4, and then repeat on sheet3.
I'm using the following code to delete select rows one at a time. I need the last row in the range to remain therefore I prevented the user from deleting the row one up from the row that contains "Total Hours" (which is always in Column B). The code works great as long at the user clicks into a cell in column B. If the user clicks into a cell in column A, C, D, E, F, G, H, or I then the code allows the user to delete the last row.
I believe I need to search entire rows to determine if the row contains "Total Hours" .
I have an Excel database of department contracts with a Master worksheet. I have created a worksheet tab for each of the departments. Column G has a dropdown list for each department. When I enter a new contract onto the Master I want it to auto copy to the coordinating worksheet based on the selected department.
If possible I would also like it to enter the newest contract would enter into the coordinating Contract Party entered into column D. (ie... If Hospital A is entered in column D on master, the new entry on the worksheet being copied to will be entered under the last Hospital A, if Hospital B is entered on Master it copies under Hospital B). If this isn't possible then I am not too worried about that part.
I have attached a blank version of the file. Current Master 5-15-14.xlsx
Each Worksheet has a unique identifying label - "Requirement Number"
Within each worksheet is free form text data of the following categories:
Requirement: 10358 Title: Customer requirement 1 Text: This describes the requirements for a product for the customer[code].....
The text of the categories may begin in column A or B
What I need is a macro that will search each worksheet for a category, e.g., "Configuration:", copy the row where the keyword "Configuration" is found, and then have that row transposed and pasted to another WorkSheet (e.g., "Extracted Data") cell.
Data extracted from the next Worksheet would begin a new row in "Extracted Data"
Example: Requirement1 Title Text Verification Method-Level ... Requirement2 Title Text Verification Method-Level ... Requirement3 Title Text Verification Method-Level ...
The Requirement# is best extracted from the WorkSheet tab since some of the worksheets are missing this information. I can provide an example spreadsheet, however, I was not able to figure out how do that in this post.
I found a thread similar to this problem:
find and copy row
However, it only finds, copies and pastes for one keyword.
I have 2 worksheets, "Data Dump" and "Target List"
I'm trying to cycle through the "Target List" in column "A", find the same value in column "B" in the "Data Dump" sheet. When I find it, I want to copy several other cells from the found row into cells on the "Target List" (though probably to a different column). Here is the code I'm trying to use. How to correct it to get the result I'm looking for.
I need to go down column C and find the word "Canada" and the find the word "Total", there are some blank spaces between, and select from "Canada" to "Total" in column C and the cells in the same rows from column C to column H.
So if Canada is in C15 and Total is in C29, select C15:H29.
I have the text value "Ball, Red" somewhere in column A. I don't know which row it's in because it will never be in the same row twice. I need a macro to find this value, then, copy that whole row and "insert copied cells" right below that row and change the value in the newly created cell from "Ball, Red" to "Red, Ball".
I tried macro recorder to do this and had no luck...
Cells.Find(what:="Ball, Red", After:=ActiveCell, LookIn:=xlFormulas, _ LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _ MatchCase:=False, SearchFormat:=False).Activate Range(Selection, Selection.End(xlToRight)).Select Range(Selection, Selection.End(xlToRight)).Select Selection.Copy Range("A21").Select Selection.Insert Shift:=xlDown Range(Selection, Selection.End(xlToLeft)).Select Range(Selection, Selection.End(xlToLeft)).Select Application.CutCopyMode = False ActiveCell.FormulaR1C1 = "Red, Ball" Range("A22").Select That's is all there is to it on this one.
I have a macro that was working fine until I added a new column to my active sheet. Now it fails with a run time error 1004, insert method of class failed. The code is as follows:
Private Sub UpdatePart_Click() Dim S As String Dim r As Excel. Range Range("A2").Activate S = InputBox("Enter the part no. you wish to update") On Error Resume Next If S = "" Then 'Exit Sub 'If StrPtr(S) = 0 Then MsgBox "Update Cancelled" Else Set r = Columns(1). Find(What:=S, After:=ActiveCell, LookIn:=xlFormulas, _ LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _ MatchCase:=False, SearchFormat:=False)...............
I am attempting to do is have a macro (Via Command button) go through column A to find the word "TOTAL". Once that is found I want it to offset by 3 rows (from the word "TOTAL") to grab the number and place it into column B.
I have a spread sheet with bunch of rows and columns. Columns goes all the way from A ... BB and rows from 1 to 40,000
The main focus is column Y and AC
If there is a value of FALSE found in column Y then macro should go to previous row and copy the value that contains in column AC and then move down to the next row, , where the value FALSE was found and that's in column Y and paste that value in column AC the NUMERIC VALUE
I have created (pieced) together a macro to search through a list and paste the results in another worksheet it works fine but i can't get it to loop through the list.
Sub Findall() Dim y As Long Dim starta As String Dim tr As Long, tc As Long Dim sr As Long, sc As Long Dim s As Worksheet, t As Worksheet Dim SourceCell As Range 'Setup Application. ScreenUpdating = False Set t = Sheets("Target Sheet") Set s = Sheets("Search sheet") Set SourceCell = ActiveCell Do While IsEmpty(ActiveCell) = False Counter = 1 'Get last used row in Target Sheet t.Select..........................
see attached spreadsheet. In sheet 1 I would like to look up each word in column D, seeing if they are in column B at all. Note if the word "Jill" is in D and "jilly" in a surname in B I would like it to get picked up. I have highlighted manually those that would get picked up. Those that do get picked up I would like to be copied into column C as per sheet 2 (this is what I would like it to end up like). There is a very long winded way of doing this using a find function and 1 column per word but as the actual sheet i'm using has thousands of different words this isn't really viable!
1. Search a specific column (Column 21/U) for non-blank values in Worksheet 1 2. Copy the entire row containing the non-blank values 3. Paste these rows into Worksheet 2.
Repeat steps 1-3 an additional 2 times, where Worksheet 1 is always searched but one more column to the right (ex. Column 22/V) is the target column for the search, then the rows are pasted into the next Worksheet (for ex. Worksheet 3)
I have a worksheet where columns C, F, I, L, O record scores within a league. Each row records a persons score in that league and there are two rows per person recording their score and their handicap score. So Person A would be on rows 3, 4, Person B on 5, 6 etc. The persons name is recorded in Column B.
What I would like to do is to have a cell(s) elsewhere in the worksheet which show the highest score in that league and display that score and the name of the person who achieved it. This ideally would need to be done for the highest score and the highest handicap score.
For the life of me I can't even begin to work out how to do that or even know if it is possible in Excel.
So to clarify, lets say the highest score is in cell L7 and the highest handicap score was in M3. The cell(s) containing this formula should then show the name in B7 and the score in L7 and below it the name in B3 and the score in M3.