Alter Existing Formula To Copy Specific Cells In Row Instead Of Copy Entire Column?
May 1, 2014
I need the macro to look at cells B9:B84 on the Sheet1 tab of the Cost Template. If it finds an x I need it to copy the 3 cells to the right of the x and paste them in a template. For example if it sees an x in cell B9 it would copy cells C9, D9 and E9, open the Purchase Order to the Detail tab, then paste it to cells B3, C3 and D3. It would continue looking for an x down to B84. So if it found 5 cells with x, it would give me 5 instances of the Purchase Order with 3 cells pasted into each.
I've attached my Cost Template and the Purchase Order it needs to copy to. In the Cost Template is a macro called Create_PO. This is what I was trying to alter to make this happen. I can't seem to get it right! FYI in case it matters, I had to change the Cost Template from .xltm to .xlsm in order to upload it on this site.
I'm trying to copy entire row from sheet "source" to sheet "output".
Condition: If cell or cells in range (E7: lastcoll, lastrow) value is "A" then copy entire row.
Find the excel template in attachment.
My problem is that my macro is copying particular row, as many times as many "A" finds.
I want to copy entire row just once doesn't matter how many cells with "A" are in particular row.
VB: 'function to find last column a change letter of column to number Private Function ColLetter(LastCol) ColLetter = Split(Cells(1, LastCol).Address, "$")(1) End Function
I tried to writer my code myself but I have a long way to go. Here is what I must do for my case:
I want a macro to find the row that include a specific text (For example "SMSC") in a range (A1:A100) then copy this entire row below the cell which has the value "OTHERS". That is, if there are 10 pieces of "SMSC" so these rows including "SMSC" should be listed below the cell "OTHERS"
I have dates in Column I (for the whole year) and i would like to paste them into specific cells in three different Columns A,B,C (ie A2, A5, A8, A11 etc) Same Numbers different letter for each respective column. I can get it to go from one cell to another but when i try to specify specific cells
This is what i have so far:
Sub Test() Range("I1").Select Selection.Copy Range("A2").Select ActiveSheet.Paste End Sub
I have a workbook with multiple sheets named by month and year that I use to keep track of loans I work with at a bank. In these sheets I have info such as:
Column B = due date Column D = loan# A Column E = loan# B Column F = status Column H = followup needed (Columns A,C, and G aren't important for the current need)
What I am trying to do is create a main sheet (TRACKER) that all I will have to do is press a macro button and it will pull info for each loan that is in a pending status.
I need a macro that will search column F (Status) on all sheets and find each instance of "Pending" and once that is done, copy rows B,D,E, and H in each "Pending" instance and copy them to their designated area on my TRACKER sheet. After that is done I need it to continue to the next "pending" instance and do the same on the next available line on my TRACKER sheet.
The overall goal would be that everyday I can press the macro and it will repopulate the sheet with the current pending items (as each day I will change pending status' to complete and no longer need to track it the next day).
I already have the tracker sheet set up and ready to go with the spaces as follows: Column G&H = Merged cells where due date will need to go Column I&J = Merged cells where loan# A will need to go Column K&L = Merged cells where loan# B will need to go Column M thru S = Merged cells where followup needed will need to go
I have a very simple lookup formula (eg: ='data'!C1) that I need to copy down about 4000 rows. The difficulty is that I need to miss out 5 rows in between each paste but no matter what I try when copying it down, it throws itself out of numerical order. I have tried to type the formula manually for every row but its taking forever and is bound to go wrong at some point. I have attached a very small example to show what I mean - Imagin this example needing the formula to run down in order up to row 4000?
Sub Test() For Each Cell In Sheets(1).Range("J:J") If Cell.Value = "131125" Then
[Code]....
This works great except that it pastes formulas. I would like to paste values only. I've tried " PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False" and it gives me an error.
I am trying to write a macro that should be able to copy existing row and insert values and formula into a new row just below the row. As an example below:
A B C D E
001 ADESF 500.00 1001210 EMF
The values in column C and D for the new row will be the same.
I am currently working on a data analysis project (data mining) and need to collect and later analyze statistics for the inputs which control a series of calculations. These statistics are shown in the Statistics 1, Statistics 2 and Statistics 3 cells in the workbook that I attached. The inputs are X,Y; all possible values for these inputs are listed in the N,O columns. Basically I need a macro which would take the values from these two columns and place them pair after pair into the controlling cells (K3, L3), then it would copy cells H2 through L3 (updated stats) to a new sheet after each copy operation - so that I will finally have a list of statistics for all of the input pairs.
way to search for a value in a cell (an unique one) using an input box and then if the value is found copying the whole row of the cell onto a new worksheet in the next available row within a table.
I am currently using the following archaic codes:
x$ = InputBox("Please Enter Catalogue Number")
For i = 4 To 500
If Sheet2.Cells(i, 1) = x$ Or Sheet2.Cells(i, 7) = x$ Or Sheet2.Cells(i, 8) = x$ Or Sheet2.Cells(i, 9) = x$ Then
this has the problem that i can't fit it to the next available row and have to be specific for each row.
it would also be great if i could put a messagebox in cases where the data is not found, basically saying that the item does not exist and if a simple excel Ctrl+F button or something similar could be attached to the msgbox so that the item can be searched and then added to the next available row.
I have a spreadsheet that contains data that needs to be copied over to a new worksheet if it contains a Date. For instance, if a Date exists in column F on worksheet1, I want to copy the entire row's contents from worksheet1 to the next empty row on worksheet2.
As it stands now, the data ends on row 67 in worksheet1 and ends on row 221 in worksheet2. So, if there is a date in F30, I would like to copy all of row 30 and past it into row 222 on worksheet2.
I am trying to copy the entire row based on values in column A. I have 13237 rows of data. Column A is grouped into about 200 categories with corresponding data in B-F. I would like this to automatically copy the data into new tabs based on the groups in column A. I would also like the tab to be renamed to the value in column A.
I am trying to find a way to copy the contents of an entire row to a new sheet in a workbook based on the value of a column, specifically column K with the value of "good". There are 3 sheets that im searching. This is where I run into problems. Im looking to start with sheet1, and copy all rows deemed "good" into entries on sheet 4. Then search sheet2 and copy all relevant entries into the next available row on sheet4, and then repeat on sheet3.
Is there a way of copying an entire sheet, but pasting only the cells that don't contain an equation?
I have a number of populated templates that need to be copied into a master document, both formatted and laid out the same. However, I have some instances where the templates have been fiddled around with so the formulas have been corrupted. So, I'd like to pick up the raw data without the corrupted equations.
I have a protected template and unprotected source worksheets - - - what I would like to happen is for the macro to start and if the source worksheet cell B3 equals "Report Total" then stop - otherwise copy template worksheet then copy 6 specific cells from the source to paste values to specific cells on the newly created worksheet (B_ to C7, D_ to I7, E_ to C9, F_ to K9, A_ to C11, M_ to K11 and then K13=F13-30)
After that then start all over again unless the next row’s cell (B4, B5, B6, . . .) is "Report Total" then stop - - - the row count could be from one to a couple hundred.
Here is what I have so far but I know that with each copy the name will change and as it goes down the source file each row will change and I also need help with that.
I have an Excel database of department contracts with a Master worksheet. I have created a worksheet tab for each of the departments. Column G has a dropdown list for each department. When I enter a new contract onto the Master I want it to auto copy to the coordinating worksheet based on the selected department.
If possible I would also like it to enter the newest contract would enter into the coordinating Contract Party entered into column D. (ie... If Hospital A is entered in column D on master, the new entry on the worksheet being copied to will be entered under the last Hospital A, if Hospital B is entered on Master it copies under Hospital B). If this isn't possible then I am not too worried about that part.
I have attached a blank version of the file. Current Master 5-15-14.xlsx‎
I have a huge data set as given follow and want to Copy a the value of treatment from the cell having Treatment description at some other sheet through VBA
'UPDATE [XYZ 1213] SET TreatmentDescription = '000' WHERE ( ("Abc" < 00) );' 'UPDATE [XYZ 1111] SET TreatmentDescription = '093' WHERE ( ("wer" < 00) );'
Like in upper code I want the output sheet 2 as Cell A1 = '000' and A2 = '093' and so on
I have these specific rows (2,3,4,6,43,44,45,63) which I would like to copy and paste it on a designated sheet. But my problem is, the column varies depending on the YEARS.
I do have codes for it, the one I got from the recording. I just do it for all of the rows (formula pasted here) until all of it copied on the summary sheet. However, when I finally finished it and I run it. I could see the movement form One Sheet to another and its not good.
A code that I could use for my better understanding of MACRO.
I have some specific procucts in coloum A in sheet (data), If that product was found in Sheets("allproducts"), copy all the rows and create a new sheet on the product name and save the excel.
Sub SearchForString()
Dim LSearchRow As Integer Dim LCopyToRow As Integer
I have some specific procucts in coloum A(a2, a3, a4, till a50) in sheet (data), If that product was found in Sheets("allproducts"), copy all the rows and create a new sheet on the product name and save the excel.
I have the attached a workbook (& the code) which merges the worksheets from 7 different workbooks together into a 'Raw data' worksheet in my master workbook. It is driven off a parameters table which allows you to select which workbooks/worksheets you want to include in the merge. - The code works fine however when it is copying the data from each worksheets it is just copying all the data as a 'block' copy where I need it do do it row by row becuase I dont want to copy the row if colum C in each row contains no data, ie. it is blank.
So in my code I need another loop which will: Copy data from column A - E for each row if column C is not blank. Paste into Column B - F in Raw Data worksheet (as column A contains the source filename) Loop until it reaches no more data. I adeeally just want to copy the specific range as above, not the whole row but either will do. This is my code, refer to attachment too which includes master workbook and an data entry workbook where the data comes from.
Sub OpenWorkbooks() Dim Book_Name As range ' List of available books Dim Sheet_Name As range ' List of available sheets Dim dLastRow As Long Dim oLastRow As Long Dim sLastRow As Long Dim DestinationSheet As Worksheet Dim SourceSheet As Worksheet Dim WorkBookList As range Dim WorkSheetList As range Dim WorkbookPath As String With Application . ScreenUpdating = False .DisplayAlerts = False .EnableEvents = False End With 'set source and destination sheet Set DestinationSheet = Sheets("Raw Data") Set SourceSheet = Sheets("Parameters")........................
I'm creating a simple program that copy one or more specific cell values and place it on a specific cell in another sheet using loop to make it easier... I'm having a difficult time trying to figure it out..
Example
from sheet1 A1:A5 Sheet1 A | B | C 1 P45 2 P46 3 P47 4 P48 5 P49
and place P45, P47 and P48 on another cell, to be specific in C1,C2 and C3, in a different sheet
Column A lists an account code on the summary line of each invoice. I'd like to copy this account code upwards for each individual line of the invoice so that I can summarise each type of charge by account code in a pivot table.
I'm a bit stumped as to how to do it. If possible I don't want to have to modify the data itself in any way so that I can paste new data in the each day without altering it.
I've started on the right with a CountA function for each row, which I was intending as a means to identifying the blanks rows and discount them, but it also showed up that each line requiring an account code to be copied returns a 4 and each invoice summary line returns a 9. I'm just not sure how to reflect this in a function.
Sheet linked from external file, new data coming daily. How to copy Values of cells from B4 till B-empty to C column? The attached file has a properly displayed data.
