Is it possible to open a file on an FTP site using VBA?
I've tried using the code below but it asks for a username and password even though it is in the code.
Workbooks.OpenText Filename:="ftp://username:password@ipaddress/ste1.txt", Origin:=xlWindows, StartRow:=1, DataType:=xlFixedWidth, FieldInfo:=Array(0, 1)
I have tried to search these forms for some information on how to have VBA code check a file saved in an FTP site. I am hoping to use this file to contain version information where the workbook code will compare the version of the workbook to the version log saved in a text file on an FTP server. If they are different, I would like a pop up window to appear that notifies the user that there is a new file available, and perhaps a prompt to save that new file to the user's computer (it does not need to update and replace current workbook).
Is it possible to have VBA check an FTP site for this if I put the username and password in the code?
I've got a basic spreadsheet that I edit at home and at work, and I am always forgetting to either email it to myself or copy it to a flash drive. So I figure I'll use my ISPs webspace given to me, and then just edit it on the ftp site from home and work so there is just one copy. I can add the ftp site and my name and password in Excel fine. BUT when I open it, it is always read only. How do I open it with write access? I have specified my ftp username and password in Excel.
View 2 Replies View RelatedI'm trying to build a hyperlink using text formulas in Excel but I get the following error message: "Unable to open [link]. The internet site reports that the item you requested could not be found. (HTTP/1.0 404)". The strange thing is that if I copy-paste the link in the web browser, the page opens normally (which proves the link is correct).
View 4 Replies View RelatedI have a tool file which contains Excel VBA codes. When I click button it asks to select a file. I want that anytime I click the button the dialogue box should open in the folder containg the tool.,
View 1 Replies View RelatedI want to create a macro that will “open the look in list” and stop so I can pick a file to open. I’ve tried to use “record a macro” and “ctrl-o”, but the record a macro won’t stop until I pick a file or cancel the file list. I also tried to use “o” in the short cut key box
View 5 Replies View RelatedI have two workbooks. One is a no-nonsense form interface that my bosses will use to enter safety information. I'll call this workbook "Form". This file is stored locally on each of their computers. The other workbook is stored on a common drive. I'll call it "Master".
When my bosses fill out the Form and click "Submit", the Master file is opened, and certain cells are populated based on information entered in the Form. This is the code I am using to make this happen:
I'm doing the following:
Dim myname As String
myname = Application. GetOpenFilename
I use it to attempt to open first a QuickBooks file and then an excel workbook.
The Quickbooks file opens fine. The Excel workbook never appears to open but
I do get the full file pathname to my excel workbook returned which I then
parse off to get just the workbook name.
Why would it behave this way? I open both these files manually all the time.
Also, I'm trying to use a filter as follows:
myname = Application.GetOpenFilename("*.QBW")
I get a compile error saying that I'm calling the function wrong.
I am trying to open a website, then for excel to download the csv file, then for it to save it in a specific folder under a specific name and file format (excel).
I am successful at opening the website with the following code, but how to do the rest.
Sub Searchez()
Dim IE As Object
Set IE = CreateObject("InternetExplorer.Application")
IE.Navigate "http://quote.morningstar.ca/Quicktakes/stock/keyratios.aspx?t=clwr®ion=USA&culture=en-CA&ops=clear" 'load web page google.com
IE.Visible = True
While IE.Busy
DoEvents
Wend
'IE.Navigate2 "javascript:SRT_keystuts.exportcsv()"
'this is the name of the download link as from when i hover my pointer over download link.
End Sub
I'm working on the following
Workbooks.Open Filename:= _
"D:CommondataIBMmainBRANCHBURG-PRODUCTS-BOM-ALUMINUM-UPDATE-" & Ucase(Format(DateAdd("y", 0, Date)), "YYYY-MM-DD")&".XLS"
ChDir "D:CommondataIBMmain"
ActiveWorkbook.SaveAs Filename:= _
"D:CommondataIBMmainBRANCHBURG-PRODUCTS-BOM-ALUMINUM-UPDATE-NAFTA.XLS", _
FileFormat:=xlNormal, Password:="", WriteResPassword:="", _
ReadOnlyRecommended:=False, CreateBackup:=False
ActiveWindow.Close
Date: 2009-06-03
What I'm trying too do is open a file, make an exact copy and save it under a new file name.
My problem is in the date formula the day is not always the same. In the sample case it's 03 at other times the day will change.
is there a way too get this too work irregardles of what the day might be?
I want to open a specific sheet and refresh only said sheet when i open another sheet for example x.xls
So opening x.xls will automatically open y.xls
I've tried this in the workbook code area but it doesn't do anything.
[Code] .....
Actually i've downloaded Tracking report of my SPO and this report is on 4-5 csv files (1 file per week). I have to gather data from these 4 files into one Worksheet. I have to do this with command button on my worksheet; with Open file dialogue box (i want to locate the csv files).
CSV files are something like that (I need only first 4 columns):
ABCDE1Name MSISDN Date Location MapLink 2M. Younus Safi "923***550577" "2011-10-07 20:36:18" "ACB Tower Badragah Chakwal. Badraga" "http://asdf.com" 3M. Younus Safi "923***550577" "2011-10-07 19:36:26" "ACB Tower Badragah Chakwal. Badraga" "http://asdf.com" 4M. Younus Safi "923***550577" "2011-10-07 16:39:58" "ACB Tower Badragah Chakwal. Badraga" "http://asdf.com" 5M. Younus Safi "923***550577" "2011-10-07 15:37:23" "ACB Tower Badragah Chakwal. Badraga" "http://asdf.com" 6M. Younus Safi "923***550577" "2011-10-07 14:37:05" "ACB Tower Badragah Chakwal. Badraga" "http://asdf.com"
and my Worksheet is like that (With a command Button):
I want to import first 3 columns of csv file on first 3 columns on my worksheet; leave 2 columns blank and then import the 4th column... now for example i have done importing data from 1st csv file and the data is on 50 rows.. i click the command button again, locate the 2nd csv file.. do the same thing (import 1st 3 columns, 2 blank, then 4th) --from 51st Row-- and so on...
ABCDEF1NameMSISDN DatedBlankBlank Location2
3
4
5
6
7
I need a VB code to open excel files located in a path (fixed path) by providing a part of file name through a input box
for ex: I have some files located in my local drive as below
1. colurgreen.xls
2. colurred.xls
3. colurblue.xls
I need a input box asking for file name and I input "green" or "red" or"blue" and it should open the resp file.
I have the need to be able to open a closed file to archive some data from a
current file.
what coding i need to be able to kick the "open file" bit off?
I do routine tasks every day which involves opening 3 different files and pasting data into my main file. The data is always in the same format, and the 3 files are saved in the same location (3 different folders through). The 3 files are saved each day and the naming convention is constant, with only the date changing. For example, the files are always saved in C:My Documents and the files are called test_05.02.2013.xls. Tomorrow the file will be called test_06.02.2013.xls and so on.
So each day I will be rolling a file forward and I want to bring in the info from each of these files based on the new day.
How to do 1, and I will do the others (because the concept will be the same).
I need to open an excel file based on a date mentioned in the file name, but minus 1 day. The file name is composed with Statistics_date_time.xls
Example: statistics_20140423_142754.xls
Once I need to open the file (only in the mornings), it has to be the one from the previous day to see the yesterdays performance. How can I create a macro that will look at the date in the file and take the one from yesterday?
This will be a part of a macro I'm making. The rest of the macro will just format the file and combine a few ones from different departments.
I've got a couple of formulas in a workbook which lookup values in another workbook. When I reopen the initial workbook the formulas results come back as errors (i.e. #VALUE!) unless the workbook it is looking at is also open. This is not desirable, does anyway know how I can lookup values in another workbook which are not open? The formula which is causing me problems is as follows:
= SUMIF( 'H:Infozoom[2006-01_assy.xls]New Table1'!$F:$F,$A8,'H:Infozoom[2006-01_assy.xls]New Table1'!$AH:$AH)/60
I've encountered a bit of an odd one. I am opening a tab delimited file, which has been sved as an xls. When I open from file manager, it opens correctly. When I open from Excel, I have to go through 3 screen dictating how the data is set up, and the end result is that a couple of the numbers come through as text, rather than numbers.
Failing an explanation - how do you open workbooks as file system objects - currently I am opening them using
Workbooks.Open Filename:=wb.Path & "/" & ws. Range("B1").Value
If I open them by mimicking the FM, perhaps it will work OK.
When it opens the desired file, it increments the file name by 1 each time it is opened (via the macro).
Example;
The first time it is opened you see the file name in the header read "P'Binder L&T Pages" for a moment, then it changes to "P'Binder L&T Pages1"...
I close the file and open it again (via the macro), and see the file name in the header read "P'Binder L&T Pages" for a moment, then it changes to "P'Binder L&T Pages2"...
The file name continues to increment on every opening until the PC is rebooted, then it starts at 1 again.
Sub OpnLTpages()
Dim wb As Workbook
Dim AlreadyOpen As Boolean
AlreadyOpen = False
For Each wb In Workbooks 'Scan open workbooks
If wb.Name = "P'Binder L&T Pages.xls" Then ........................
Looking for a macro, to run upon opening file, that opens a linked file and if the file is already open does nothing.
View 2 Replies View RelatedI have a workbook were a user will write down some info. Then I need to copy that data to a second workbook located anywere in the Hard drive. i used the function "GetOpenFilename" or the "Application.dialogs(xlopenfile) to ask the user where is the file (and open it). Now I need to get the name of that file. How can I get it?(the name of the file the user selected to open). P.S. I saw there is somewhere a "Print" function to copy data from a workbook to another closed workbook. I was planning to have both workbooks open and then just use several lines like:
View 4 Replies View RelatedI need a code to open a file automatically based on file name, for example if the active file name is "trial", then it need to open another file named "trial1" based on which the macro will run, because I have two set of files and I want to compere daily with two users. for example the file names in Set a- iron, cement, stone, sand where as the set b-iron1, cement1, stone1, sand1
View 1 Replies View RelatedWhat I would like to do is to open an excel workbook from a bat file in dos with one arguement.
so something like
start c:lacklist.xls 2315t
Once the blacklist.xls is opened I would like to have the macro to save the excel file as a csv file ignoring all the prompts and use the argurement 2315t as the directory to save it to on the j drive ie save to j:2315tlacklist.csv. Then close the workbook and continue with the rest of the commands in the bat file.
I'm guessing I have to use GetCommandLineA to read in the arguement but I can't find anything on the net that gives a clear explanation of how to use it.
I have the following code, saving created files to a local network. I need to change the save location to an FTP site (with username and password). Is this possible/How do I do this?
Sub Filter()
Dim name As Object
Application. ScreenUpdating = False
Application.DisplayAlerts = False
ActiveSheet. Unprotect Password:="letmein"
MYCOUNTER = 100
I have a master workbook called "BoM count" which I would like to have capture all the materials used on site. This info has already been captured on the workbook "Survey of materials used on site" (There are losts of these, 1 per site)
I want to open the survey within the BoM count workbook and pull out the relivant numbers of materials used and also list the site ID to show that, that survey has been completed.
I have a some problem with connecting between VBA Excel and web site.
I wrote a macro to insert the data from excel but there is one problem with displaying the correct view.
I use this site to get the price of the bonds:
[url]
it is the site of russian exchange
First of all I write the ISIN code, for example RU000A0E6X12, in the "Quote Search" field and then press Enter for getting the data. After it I can choose the History information or Online from the last field in the left margin. I want to chose "History" and after it the dates from and till are appearing automatically. The automatization of it is my task. And I have only one problem in the end.
The program:
I have the vacation sheet so I can track my vacation hours used and available. The last thing I need is a way to count the number of days I'm not at my site. It doesn't matter why (Training, Holiday, Travel or Vacation) I need to track total days of site.
View 4 Replies View RelatedI am working on a spreadsheet that hits an external site. My questions is, I need to hit the site about 80 times becuase I search for different info. It there a way to get the vba to go down a list 80 of names rather than me entering the vba code 80 times with the different names?
i have 306 web pages listed in sheet 1, A1:A306
how can i get a macro to open each and scrape a piece of info from each, and then store in a row in sheet 2?
I am trying to create a spreadsheet to record the amount of cars in a car park at any one time.
I have created a basic sheet with columns for car/reg/visiting and a drop down box for time in and time out (both done using validation lists) and a duration column that calculates the time between in and out.
What I am looking to do is create something that tells me how many cars are onsite at any one time, taking into consideration what time cars come and go.
Then from this I am looking to produce a chart with axis of to time/cars.