Is there any way of opening a workbook via VBA that will set the calculation to xlCalculationManual BEFORE the workbook calculates anything on opening.
The purpose: I'm opening the workbook remotely from an Access document and there are quite a few formulas in the workbook that take a few seconds to calculate. I have a modeless UserForm that displays from the Workbook_Open event which I want to get displayed before all the calculations take place so the user has something pretty to look at while he/she is waiting. But it seems that the workbook performs a calculation before running the Open event code.
I want a specific workbook to be always on manual but when I open other workbooks I want them to remain on automatic even though the first workbook is set on manual through vba code. Is that possible to be done?
This is the code I run:
Private Sub Workbook_Activate() With Application .Calculation = xlManual .MaxChange = 0.001 .CalculateBeforeSave = False
[Code] .....
I know that Application. Calculation refers to all open workbooks but I don't know the code to specify the manual calculation to this workbook only while others are open.
I have created a spreadsheet some time ago and have been asked to improve on it but I'm rusty with VBA.
I have an automated ordering system that saves each sent order as the date e.g "05-04-2013.xls" but the management team want a graph with the data for the last 4 weeks compared. I have created a seperate workbook called "consumables report.xls" which has a column with the products listed followed by columns "Quantity" and "cost" which is repeated for the 4 weeks of the month.
I want to add a button to prompt the user to choose the saved order e.g "05-04-2013.xls" (all orders saved in same directory) to copy and paste the quantity and cost columns (c8,D69) into "consumables report.xls". I got this to work earlier but it would only paste the formulas and not the values. So I need
A prompt to open workbook Copy range (c8,d69) Close work sheet Paste special .value (c8,D69)
I dont care if it has to open the workbook to copy the data as this will only be used once a month so it dosnt matter how slow the code is.
I have Monthly sales sheets that import my cash register data into them. I wanted to set them up to do everything without being there. So I have my task manager open excel at 9:30pm everyday and it runs the macro to import the data into the correct day of the month. Here is the workbook
open macro-
Private Sub Workbook_Open() Dim dTime As Date dTime = Time If dTime >= TimeValue("9:30 PM") And _ dTime < TimeValue("9:40 PM") Then ImportData End If End Sub
This is in my July spreadsheet only. So is there a way to make it know which month spreadsheet to open on the 1st of the month? So come August 1st it will automatically open the August workbook and input the data for the first day? By using the date?
I have a presentation that I open from a short-cut. After the "Welcome Page" is opened, I want to open a second workbook in a new instance of Excel after 4 seconds.
I think that I can open the new instance of excel, but I don't know how to activate the macro after 4 seconds.
I'm sure there is a function someplace for this that can be used in a macro.
Then, after the second Workbook is opened, I want the Welcome Page "Workbook" closed, leaving the second Worbook open.
My Splash screen opens a few seconds after the workbook has loaded. Is there a way to make the workbook open minimzed until the the splash screen closes then open properly? What I trying to say is that only the splash screen is visible until it closes.
I would like to write a Sub that will see if a workbook is open and if it is not then open it. I know how to have a macro automatically open a workbook, but I run into problems when the macro runs and tries to open an already opened workbook.
The issue is.. I have a locked spreadsheet and one of the column has a formula in it i.e column H +column I - column J for each particular row.
wen the user inserts a new row the formula is not entered automatically to the new cell in the column which has the formula.
could someone tel me how to write a code for calculating the cell when they click on the button.. basically i have thought of having a button which the user clicks to populate the whole column. But i am not getting the syntax right..
Create a full copy of an open workbook (eg. activeworkbook MyFile.xls) using VBA, with the new copy (eg Book1.xls) open as well ,without having to save a copy first then open it ?
I did a macro on my mac to transfer a sheet from one workbook to another worbook. It works very well when the destination workbook is open. Therefore I wanted to add some piece of code to check if the destination workbook is open. If not then I wanted the macro to open it before tranfering the sheet. Here is the code I´m using for tranfering the sheet
Sub Transfer_Sluttet() If ActiveSheet.Index <> Sheets.Count Then Application.DisplayAlerts = False Set ws = ActiveSheet Sheets(ws.Index + 1).Delete ws.Move Before:=Workbooks("Sluttet.xls").Sheets("sheet2") 'Moves active sheet to beginning of named workbook. 'Replace Test.xls with the full name of the target workbook you want. Application.DisplayAlerts = True End If End Sub
This is the type of macro I useually use on my pc to check if a workbook is open and if not then open it
If IsWorkbookOpened("Filename.xls", "C:Documents and ..................
Column E has the amount of time each day. Column G is where I want the Sum to be displayed.
I need Column G to do a =Sum(E4:E33), but if anywhere in between E4 and E33 there is a period of 5 days where it totals 0 then I want column G to re-add from the first day where there is a amount in it.
Ex: E4 to E10 totals 7 (1 per day), from E11 to E15 totals 0, from E16 to E33 totals 18 (1 per day again).
In Column G at G10 it should total 7, at G11 it should be 6, G12 5 etc until it hits G15 where it sees the 5 previous days nothing was entered so it enters a value of 0, because G15 is set to 0, G16 will start adding from E16 till E33, until somewhere down the line it sees another period of 5 days where it adds up to 0 again.
Spreadsheet tracks race times for cross country races and needs to be able to calculate improvement time in mm:ss (or zero if less than previous race).
Also,it would be nice to be able to enter times without using colons or have to reference the field as h:mm:ss. The race result will always be mm:ss and the last two digits will always be seconds, the result will never be more than 60 minutes so hours are a real bother.
How to calculate ANI in one cell? The only way I can currently find the result is to build an amortisation schedule and then divide the sum of the outstandings by the payment frequency.
I have data that daily needs to be refreshed and printed to pdf.
I figure the simplest way to do this would be to task schedule the workbook to open daily. Then on open it will refresh the data, print it after all data has been refreshed and close the workbook.
I set it up originally without the need to print so I have all the queries set to refresh when opening the file, however when I now try and put the code to print to pdf on the workbook open event it runs before the queries are finished running. (Query notes: queries were created through Microsoft query, and are accessing a MySQL database queries set to refresh when opening the file queries set to enable background refresh).
I want to find out how many hours, in total, relate to "consolidation 1, 2, 3; Lease Renewal 1,2 3 etc. What formula can I use. I am working on a "sumif" but it's not working out for me. Hours 1 Consolidation 4.75 3 External Sublea 3 Consolidation 2 3 Special Project 2 External Sublea 1 Lease Renewal w 1 New Lease w/o T 4 1 New Lease w/o T 1 1 External Sublea 3 Lease Renewal w 1 2 Lease Renewal w .5
Code: Sub CopyRow()' 'Copies row to new sheet, highlights it, marks column 'A' as copied. ' Dim cCell As Range Set cCell = Selection.Cells(1, 1) Selection.Copy Sheets("Sheet2").Select Rows("2:2").Select
[Code] .....
Is it possible to modify it to paste into a different workbook called c:filesDestination.xlsm, instead of the existing workbook (Source.xlsm)? The destination sheet name is the same (Sheet2). It's OK if both workbooks are open at the same time.
I'm trying to figure out a way to find a specific sheet in a workbook that does not contain the macro. Within the macro I have a cell which holds the name of the specific sheet I would like to find but I can't get it to work for some reason...
'Dim officen As Integer 'Dim thiswb As Workbook
officen = Range("A2").Value Set thiswb = ActiveWorkbook ' Open the Active Info file Workbooks.Open "C:My DcoumentsActive 20080616.xls", , , , "xxxxxx" ' Dim sourcewb As Workbook Set sourcewb = Workbooks.Open"Active 20080616.xls"
is it possible to write vb code to open the workbook, scroll through everysheet? extract the values from each worksheet?
let's just say, I only know the workbook name, but not the sheets of the name inside. So the vb code could scroll through every worksheet without knowing the worksheet name, only the workbook name(workbook.xls)
This is pretty basic I just don't know what command to use. I have a macro that's supposed to copy data from one workbook to another, it works fine but In the macro it open the other workbook then closes it. I would like the macro to not reopen the second workbook if it is already open (since reopening causes it to lose the newly updated info). I think it can be done with a If command but I don't know which tried the following: If workbooks("M:/database") Is Open but of course 'is open' doesn't work, but can anyone tell me what to use instead.
i have a problem that i have been trying to get over for about a week now. i need to calculate a lease commission, with an extensive amount of variables. first i need to find the length of the total term which should be anywhere between 1 to 10 years. then on a annual basis i need to define how many months are billable in that year. which gives me to variables to account for there, which are A= initial free months, non paying B = the last month of last year may only be a half year
i think i have worked that out pretty successfully, so next i need to calculate the rent for each year period. with several variables a= the rent can be caculated : -by per month basis - by annual basis - by a per square foot basis b= next in relation to annual rent operating expenses may also be calculated in the annual rent number also by the same variables, however it may or not be calcuated into the number depending on the lease.
c. this is where i am at now, and its killing me. i need to account for rent adjustments for each year. rent adjustments can start from either the lease start date or the date that rent starts which would be after the lease start if free rent is granted. then the adjustments will continue through the end of the term and be implimented every x number of months. the value of the adjustments will either be a percentage of the first years rent usually 3-5 % or per sf, per month, or just flat rate per year. but it will escalate each year. for example year 5 is x amount of ajustment from year 4.
i am finding difficulty in finding an annual value of the original lease term in relation to this date series. expecially if the adjustment periods leave a remainder carring over to the next year, or if their are several adjustments in one given year. any help would be appriciated on this.... i know its pretty complicated, and i have rewritten this code about 30 different ways , i am at a loss right now. if you think you may want to see my file let me know and i can post it
