Re-Calc From New Cell If So Many Cells Are Blank
Nov 11, 2008
I have 2 columns.
Column E has the amount of time each day.
Column G is where I want the Sum to be displayed.
I need Column G to do a =Sum(E4:E33), but if anywhere in between E4 and E33 there is a period of 5 days where it totals 0 then I want column G to re-add from the first day where there is a amount in it.
Ex: E4 to E10 totals 7 (1 per day), from E11 to E15 totals 0, from E16 to E33 totals 18 (1 per day again).
In Column G at G10 it should total 7, at G11 it should be 6, G12 5 etc until it hits G15 where it sees the 5 previous days nothing was entered so it enters a value of 0, because G15 is set to 0, G16 will start adding from E16 till E33, until somewhere down the line it sees another period of 5 days where it adds up to 0 again.
View 14 Replies
ADVERTISEMENT
Sep 29, 2008
How to calculate ANI in one cell? The only way I can currently find the result is to build an amortisation schedule and then divide the sum of the outstandings by the payment frequency.
I'd like to avoid building the amort.
View 9 Replies
View Related
Aug 2, 2014
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies
View Related
Mar 12, 2014
I am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.
View 8 Replies
View Related
Mar 22, 2014
I presume this is fairly simple to do, since it's certainly easy enough to do manually by filling in a couple of rows and dragging them down, but I need it to be performed in a macro that I can run before other macros run.
What I need specifically is for the macro to go to G1 and insert the number .01... Then go to G2 and insert .02... Then G3 and insert .03... And repeat this until it finds the first non-blank cell ( row number this occurs at varies), at which point it ends and does nothing to that populated cell or any other cell in the column thereafter (including other blanks farther down).
This all needs to be done in Arial, 10pt, white.
View 10 Replies
View Related
Feb 27, 2013
I have a list that looks something like this:
Column B
Row 4 Item 1
Row 5 Item 2
Row 6
Row 7
Row 8 Item 3
Row 9
Row 10 Item 4
Row 11
Row 12
Row 13
Row 14 Item 5
The range of cells in column B containing the items has a name "ColStreams"
I need to go through the list, filling in each blank cells with the value contained in the first non-blank cell above it - so, in this case, rows 6 and 7 would contain "Item 2", row 9 would contain "Item 3", rows 11-13 would contain "Item 4" and so on.
View 2 Replies
View Related
Nov 17, 2008
The formula below calculates appropriately, however, if any of the cells (E12,E14, E21, E22, E28, E29) are blank, it returns a #VALUE! error. I would like the cell to remain blank. How can I do this? The formula is listed below.
=(SUM(E34-E6)-(SUM((E12)+E14)-(SUM((E21)+E22)-(SUM(E28)+E29))))
View 9 Replies
View Related
May 5, 2008
The issue is.. I have a locked spreadsheet and one of the column has a formula in it i.e column H +column I - column J for each particular row.
wen the user inserts a new row the formula is not entered automatically to the new cell in the column which has the formula.
could someone tel me how to write a code for calculating the cell when they click on the button..
basically i have thought of having a button which the user clicks to populate the whole column. But i am not getting the syntax right..
View 9 Replies
View Related
Jul 2, 2014
I need to combined all non blank cells in a given row into 1 cell. But within each row i have 5 phases that the values fall into, which is denoted by the 1st charter 1, 2, 3, 4, or 5. for example, in a given row i have 1-a, 1-c, 2-d, and 1-f and these values occurs in non consecutive columns starting from G to ALR. I need a macro that sorts these values in one of the 5 phases. So in another sheet the macro would combined [1-a 1-c 1-f] in Phase 1 and [2-d] in phase 2. and if there are other phases it would put them in the appropriate cell.
See attached workbook : Work Order Summary Sheet.xlsx
View 3 Replies
View Related
Jul 17, 2014
However, in addition to what the macro already does, it is possible to add another work sheet in the same work book that outputs the values in separate cells? It also has to output the data in order: for example, in the first work sheet the data is inputted at random and has spaces but the macro will have to remove all the blank cells and output them in order based on the first value in the test string, 1, 2, 3, 4, and then 5;
input:
blank 3-x Blank 1-y blank 2-z 1-k
output:
1-k 1-x 2-z 3-y
View 4 Replies
View Related
May 27, 2006
Spreadsheet tracks race times for cross country races and needs to be able to
calculate improvement time in mm:ss (or zero if less than previous race).
Also,it would be nice to be able to enter times without using colons or have
to reference the field as h:mm:ss. The race result will always be mm:ss and
the last two digits will always be seconds, the result will never be more
than 60 minutes so hours are a real bother.
A1 (8:52, m:ss) - A2 (8:40, mm:ss) should = 0.12 (12 seconds)
Presently I am using the following: =TEXT(A2-A1,"h:mm:ss"), I only want to
display m:ss, hours are meanlingless
View 12 Replies
View Related
Aug 10, 2006
I have 3 columns of dates (A1, B1, C1).
Several different scenarios:
1. If A1 is blank, but B1 & C1 are populated, I want to put the result in
D1.
2. If B1 is blank, but A1 & C1 are populated, I want to put the result in
D1.
3. If C1 is blank, but A1 & B1 are populated, I want to put the result in
D1.
4. If A1 & B1 are blank, I want to put "N/A" in D1.
5. If A1 & C1 are blank, I want to put "N/A" in D1.
6. If B1 & C1 are blank, I want to put "N/A" in D1.
Why are there 3 date fields you ask, the powers that be want it that way,
View 14 Replies
View Related
Jan 30, 2007
I am wanting to calc the yrs of serv in different age ranges for example
Start Age = 17
Yrs in Serv = 25
Age to date = 43
Band 1 (21 yrs) IF(start age is =41,age to date - 41,0) =2
Band 1 = worked 4yrs from an age of 17 to 21
Band 2 = worked 18yrs from an age of 22 to 40
Band 3 = worked 2yrs from an age of 41+
I am stuggling with the formula to calc Band 2.
View 9 Replies
View Related
Nov 17, 2008
Is there any way of opening a workbook via VBA that will set the calculation to xlCalculationManual BEFORE the workbook calculates anything on opening.
The purpose: I'm opening the workbook remotely from an Access document and there are quite a few formulas in the workbook that take a few seconds to calculate. I have a modeless UserForm that displays from the Workbook_Open event which I want to get displayed before all the calculations take place so the user has something pretty to look at while he/she is waiting. But it seems that the workbook performs a calculation before running the Open event code.
View 9 Replies
View Related
Jan 28, 2007
I want to find out how many hours, in total, relate to "consolidation 1, 2, 3; Lease Renewal 1,2 3 etc. What formula can I use. I am working on a "sumif" but it's not working out for me.
Hours
1 Consolidation 4.75
3 External Sublea
3 Consolidation 2
3 Special Project
2 External Sublea
1 Lease Renewal w
1 New Lease w/o T 4
1 New Lease w/o T 1
1 External Sublea
3 Lease Renewal w 1
2 Lease Renewal w .5
View 9 Replies
View Related
Aug 6, 2006
i have a problem that i have been trying to get over for about a week now.
i need to calculate a lease commission, with an extensive amount of variables.
first i need to find the length of the total term which should be anywhere between 1 to 10 years.
then on a annual basis i need to define how many months are billable in that year.
which gives me to variables to account for there, which are
A= initial free months, non paying
B = the last month of last year may only be a half year
i think i have worked that out pretty successfully, so next i need to calculate the rent for each year period. with several variables
a= the rent can be caculated :
-by per month basis
- by annual basis
- by a per square foot basis
b= next in relation to annual rent operating expenses may also be calculated in the annual rent number also by the same variables, however it may or not be calcuated into the number depending on the lease.
c. this is where i am at now, and its killing me. i need to account for rent adjustments for each year.
rent adjustments can start from either the lease start date or the date that rent starts which would be after the lease start if free rent is granted.
then the adjustments will continue through the end of the term and be implimented every x number of months.
the value of the adjustments will either be a percentage of the first years rent usually 3-5 %
or per sf, per month, or just flat rate per year. but it will escalate each year.
for example year 5 is x amount of ajustment from year 4.
i am finding difficulty in finding an annual value of the original lease term in relation to this date series. expecially if the adjustment periods leave a remainder carring over to the next year, or if their are several adjustments in one given year.
any help would be appriciated on this.... i know its pretty complicated, and i have rewritten this code about 30 different ways , i am at a loss right now.
if you think you may want to see my file let me know and i can post it
View 9 Replies
View Related
Jan 13, 2014
Ok so my named range looks like this:
[Code]....
However, I want to ignore the "" cells and the truly blank cells... However, I think all of them will have "" since I have this formula in all of the ones I'm putting in the range:
[Code]....
How do I go about getting these results into a named range so I can use it on validation since validation only seems to ignore truly blank cells and not the "" ones.
View 4 Replies
View Related
Apr 15, 2008
I need a formula that will give a zero amount if cell C14 is blank AND add cells C14 & C13 if cell C14 & C13 are not blank AND add Cells C14 & C12 if Cell C13 is blank but cell C14 is not.
I tried this formula but it will not work: ....
View 10 Replies
View Related
Mar 8, 2014
i have a situation where i want cells c13:e13 to be locked if cell g5 is blank. and same cells will be unlocked only if g5 contains text only.
View 4 Replies
View Related
Feb 15, 2009
So what I have is an unknown number of rows, starting at row 2. The first row (row 2) contains information from A2:M2 but all rows after this in column M will be blank up to a particular row. What I want to do, is count how many rows are blank in the column M up to the last blank cell and fill this with a specific word. I have attached a basic layout workbook to show what I want. There is a comment on cell M3.
View 2 Replies
View Related
Apr 9, 2009
What I would like to do is to take the name values in column B and fill that into the region of blank cells below. I know that a special cells function could probably do this paired with a looping structure. I'm new to VBA and am trying to learn it so that I can use it comfortably.
View 8 Replies
View Related
Dec 13, 2011
I have a spreadsheet and need to ignore one of the cells (P29) if cell value is Zero or Blank and display a blank cell which in this case is (Q2
My current formula is
=SUM($P$19:P29)/2
View 1 Replies
View Related
Nov 12, 2012
I'm trying to select the same cell and a blank cell multiple with a UNION(). Is this possible?
Here's a summary of my code:
Code:
Dim c
Dim Rng As Range
Dim blankC As Range
Set blankC = Range("XFD1048576")
Code] ......
Ultimately, I'm trying to copy various cells and reorganize them including blank cells to conveniently use UNION for a quick copy and paste as opposed to explicitly defining where to paste everything.
View 9 Replies
View Related
Nov 30, 2006
I am trying to fill down data in columns A:C but only if there is data in column D. I have butchered VBA into this working bit but the fill down stops too early.
Sub fillall()
Set x = Worksheets("Paste"). Range("A3", "c3")
Do
Range(x, x.End(xlDown).Offset(-1, 0)).filldown
Set x = Range(x.End(xlDown), x.End(xlDown).Offset(0, 2))
Loop Until x.End(xlDown).Offset(0, 3) = 0
End Sub
View 8 Replies
View Related
Mar 6, 2008
The attached picture shows the problem. I want to automatically fill the blank cells in column A with the value immediatey above them. I want to do the same for column B and C. I have never worked with VB except to copy key strokes.
View 3 Replies
View Related
Apr 6, 2014
Referenced cells returning zeros: can these be made blank or string data?
But why I still get the value 0 instead of blank cell when I press ctrl+shift+enter?
My formula = IF(U15="Bank", PROPER(E15),"")
and E15 = VLOOKUP(B15,'Customer Data'!$D$6:$K$100,3,FALSE)
View 5 Replies
View Related
May 9, 2009
I'm using a formula that I got from a previously made excel sheet. The formula does what I need it to do and looks like this: =INT((D10-10)/2)
The problem is, if I don't enter a number in the cell D10, all the cells with this formula show -5.
If I don't want data entered into D10 yet, I'd like all the cells with that formula to be blank until I actually enter a number in D10.
I think it has to do with using an IF statement followed with ""? Am I on the right track?
Also, if I have other formulas like =SUM(AP3:AQ6), but the cells it refers to are blank, how can I make the cell with the formula also be blank rather than show a 0?
I know I can turn off the "Show a zero in cells that have zero value" option, but I was wondering how to do it with the formula instead.
View 9 Replies
View Related
Oct 21, 2013
I have a spreadsheet that can do more than one calculation on each row
ITEM
FLOW
(l/s)
[Code]....
The values in row A can only be selected from a named range drop down. If no entry is there (i.e. blank) then i'd ideally like the cells to return from black to white.
View 9 Replies
View Related
May 9, 2009
I have 2 similar question.
I'm using a formula that I got from a previously made excel sheet. The formula does what I need it to do and looks like this:
=INT((D10-10)/2)
The problem is, if I don't enter a number in the cell D10, all the cells with this formula show -5.
If I don't want data entered into D10 yet, I'd like all the cells with that formula to be blank until I actually enter a number in D10.
I think it has to do with using an IF statement followed with ""? Am I on the right track?
Also, if I have other formulas like =SUM(AP3:AQ6), but the cells it refers to are blank, how can I make the cell with the formula also be blank rather than show a 0?
I know I can turn off the "Show a zero in cells that have zero value" option, but I was wondering how to do it with the formula instead.
View 9 Replies
View Related
Aug 25, 2008
I need to put an extra "spacer" cell in each row that contains either 8 or 9 blank spacer cells in columns A through H or A through I, respectively, so that everything in those rows shifts to the right by one column. The problem is that all the other rows don't need any extra spacer cells. There is no pattern to the rows that need the extra spacer cell (such as every 5th row, or something).
View 3 Replies
View Related
