Ive got about 300 different excel files all with the exact same format the only thing that is different is the values in the columns but they are all raw reports dumped into excel.
because I had to run them all seperate for certain reasons is there a way to combine all these files into one file without copy pasteing them all into one sheet.
I'm using Excel 2007. I didn't change a single option but for some reason this problem came up. When I open an already saved Excel file it opens up in a newly created file. For example, if I open a file saved as "Monthly Sales" it will open it up and rename it as "Monthly Sales1." When I go to save it again, which would normally just save it where it currently sits, it basically acts as if I hit Save As and pops up the box asking me where I want to save it. This is extremely annoying as most of the places where these files are saved are several folders deep which makes it time consuming every time I open and alter a file. I can't find any options that looks something like this and it only happens in Excel.
View 9 Replies View RelatedI am trying to open excel files in a file path which includes folders which also have excel folders i wish to open there are quite a few.
At the moment i am working with this code but it fails to open excel files which are within the folders in the specified file path. Its fine for excel workbooks in the folder specified by file path.
This is the code
Sub RunCodeOnAllXLSFiles()
Dim lCount As Long
Dim wbResults As Workbook
[Code].....
I have a lot of files with data that i need to copy into a master file.
I could open each file copy the data i need and paste it into the file. But I know there must be a way to do a loop macro.
All the files are labled "Sauce Data "Date"". all the data is in the same place in each file. I can easy have a list of all these file names in a tab in a main file "Main Data".
I what to be able to open each file copy from tab "Sauce info" A1:B65, and paste into "Main Data", tab "main" and then create a long list of data.
Have not been at VBA long so am prety much "junior" I suppose
What I have so far is folder for each Client! - maximum of 4 files in each folder and could all be open at same time
Have "central" VBA well set out control page with Client Files option and command buttons but files open at "last page saved"
Added worksheet select which opens perfect - after the "macro" yes/no open box opens with "last page saved"
Working with "office 2000 SB" and have tried various ways
workbook open / beforeclose / beforesave - matbe not 2000 objects
Just want client to see file opening with his name nicely shown on worksheet
Would really appreciate suggestions to get file open at client worksheet page from start
I have 50 files each with 1000 numbers in column A.
I need to compare every list with every other list and calculate the Pearson function.
I am ok with the vb code to compare every file with everyother.
I can do this by opening each file then closing but it takes too long.
Each of the 50 csv file names is in my destination workbook
I would like to define an array using the file name, then extract 2 lists without opening the files then perform the pearson function and place the value in the destination workbook. (The pearson function just measures the strength of correlation between 2 sets of numbers)
I was to combine 130 files into one file without having to open all the files, if it's possible if not, then I guess I'll have to open them up. All Files have the same number of columns but difference number of rows.
View 9 Replies View RelatedI have a department of around 20 ppl, each have excel files that can contain upto 10 tabs with those in turn possibly containing upto 500 lines each.
I now need to take totals from each person, linking it back to my one 'master' file.
Now i could do this with various VLookups but speed would be an issue here. I will be working off company servers too, so shared drives are involved.
to separate a very large excel file into multiple files based on what's in a single column.
I am an intern at my district school board and I'd love to know if there is a way to do this.
In the attached file the first tab is an example of some of the information I have in my file. My file is thousands of rows larger. The next few tabs are examples of new files (not just new tabs) That I would like separated and saved somewhere on my hard drive.
Notice the files are split up based on the student.
Is there a way to parse out this information into new files? The file is huge and I need it to do this automatically. If it isn't possible to save new files, is it possible to parse out the students into new tabs? But I have too many students I think. How many Sheet Tabs can you have in 1 file?
I have about 100 csv files of the same format that I would like to append into a single master file. Order is not important for appending (I can do a column sort later) I can do copying and pasting, but this will take a long time especially because I will creating more master files from completely different CSVs in the future. Is there a faster way to append CSV files?
I am trying to combine 60 separate excel files into one main file. I've been opening each file copying it then pasting it into the main file.However, this is getting tiresome.
View 1 Replies View RelatedMy associates have saved about 2,000 .zip files in a single repository. Each zip file contains a .pdf, and a file called "metadata.xml" - the metadata files are small, only 1-2Kb.
What I'd like to do is import the contents of each metadata.xml file into a single workbook so I can build an inventory of the pdf files.
The full path looks like this:
Z:PrincetonGlobal DataFinancial DataFinancial DataWCFNDL_PRODUCTION128650_TH1X0_ProTechLLC_A_Eng_BBOT__20140317132245.195_bbot.zip
Everything up to and including FNDL_PRODUCTION is exactly the same for each file. Everything after, varies, and is not predictable.
I'm thinking there is some way to say "for each file in repository, import metadata.xml content..."
i would like to use the application.getopenfilename to select multiple files, then with these file's would like to be able to use them to create a email with these files as the attachment. then move the files to a new location and delete the originals.
View 2 Replies View Relatedmerging the multiple *.xls files into one single *.xls file but each *.xls file com in separate worksheet.
Say i have 30 xls files in datewise i.e., 01.10.10, 02.10.10, 03.10.10 so on....
I want to merge all the above 30 xls files in single file master workbook - in that master workbook file the above 30 xls should come in separate work sheets.
adapt the code write by TURBO at [URL]....
I'm trying to add more sheets to consolidate the data from different worksheets
What I want it to do is to consolidate each worksheet in every excel file into one workbook that will have the same worksheet structures as the child files
If every excel file has {Sheet1,Sheet2,Sheet3} structure The Master Consolidated workbook should have the same structure but with all the date copied from the child excel files.
Attache it's also an example
Test xls files2.zip
I have situation which needs expert advice. I have about 22 Excel files of different branches with similar data. I have to link some calculated cells from each of these files into one file to show the consolidated data. There are about 18 calculated cells in each file, so linking each one is practically impossible.
View 10 Replies View RelatedI'm trying to build a macro to open multiple files at one time that will always be saved in a consistent drive. The problem is that sometimes there will only be one file for a month (ie only at month-end) and other times, there may also be additional files for different dates throughout the month. I wont know ahead of time how many files there will be, but they will always be saved in the same file name type that is "FILE DESCRIPTION MM-DD-YYYY". How can I build a loop that looks for a file on each possible day but doesn't error out if the file doesn't exist?
View 1 Replies View RelatedI have a bunch of workbooks in a folder and I'm basically trying to take the average of the same specific range for each file. I have somewhat of a method for doing this where I separate it into several steps and grab bits of code for each step (there's descriptions on the code). How I can improve or streamline it?
Code:
'STEP 1
'run this first to combine multiple files/workbooks into one file
'Change MyPath to the folder location
Sub Merge2MultiSheets()
[Code]....
How do I write a vb macro that copies everything from multiple files, including sheets within files, and puts them into one master file. Here's what I have so far. I used a script from gnaga that worked great but it didn't copy seperate sheets. If you can help me out, I would greatly appreciate it.
Sub MergeSheets()
Dim SrcBook As Workbook
Dim fso As Object, f As Object, ff As Object, f1 As Object
Application.ScreenUpdating = False
Set fso = CreateObject("Scripting.FileSystemObject")
Set f = fso.Getfolder("C:Temp")
Set ff = f.Files
For Each f1 In ff..........
Set
On this forum, a script is provided to break a large Excel file into smaller 500-line files:
Split Worksheet Into Multiple Files By Every Nth Row
I copied the code and pasted it into the VBA editor in Excel 2007, but when I run the macro, it generates an error message:
Runtime error 91: Object variable or With block variable not set.
The line the debugger identifies as the one with the error is this one:
For lLoop = 1 To rLastCell.Row Step 500
Here is the full code from the previous thread: ...
I have about a thousand Excel timesheets that all contain 'hours worked' data in a column. Each row contains the area of the project they have worked on and therefore the amount of time they have spent on it. The timesheets also contain the person's name and a w/e date.
I want to sequentially work through each timesheet held locally in a single folder and copy the person's name, w/e date and the hours held in the column into a single new spreadsheet. I need to transpose the data so each amount of time spent on an activity ends up in a column.
I have attempted to record a macro for this but each time I try and run it after the intitial run, it moves to a completely different cell or set of cells to the ones I have directed it and consequently there is no data copied to the new sheet.
I believe this is the first problem..! The second is working through a high number of spreadsheets held in a single locattion but whilst browsing this site I saw the "Excel VBA Loop Through a Folder of Excel Workbooks" page and think this should work fine.
I have a need to open a file from my companies intranet. My current method was to open said file via the method that the recorder gave me. However, I would like ot be able to open a said file without having to start open another workbook.
This is the path:
[url]
So the command is this:
Workbooks.Open [url]
Links are not actual links
So what I need to know. Is how can I open this file without opening a workbook. I haven't been able to use the VB "Open Statement" to open a file and I don't believe that I've been successfull using the Filesystem object either.
Trying to learn the basics of how to pull data, from the same formatted excel spreadsheets, combined into one consolidated spreadsheet. I created a few examples below of what I am trying to do. Eventually, I want to be gathering data from over 200 spreadsheets at one time. I believe that a MACRO is needed to do such a thing. I am not sure of the complexity of the MACRO, so hopefully I will be able to mimic whatever needs to be done in my actual file. I have almost ZERO experience with MACROS, so if this is way above entry level MACRO.
Below I have 3 spreadsheets, and I want to collect the data from those 3 spreadsheets into the consolidated spreadsheet.
Here is a project I can’t seem to do on my own if you can point me in the right direction I would be grateful! here is the best suedo code to describe the needs of the script:
In the open workbook named MASTER, on Worksheet named -MASTER- ( Let’s refer to this all as just MASTER)
(In production, the name of this workbook will be an account #_ date, and the worksheet will be a date)
For each numeric value in row 6 (we’ll call these values AD###) of MASTER
'*****Part one of routine*****
Search directory "H:AccountingAdvertising Accounts" for workbook named AD### AX.xls
(Note the AX suffix of the file name)
If match is found open workbook and proceed to Part two
If match is not found, goto Private Sub AD_MISSING
'*****Part two of routine*****
I have approx 11 files in one folder and one master file with same format. 11 files are split user wise and user inuputting the remarks against the invoice in coloum Y and Z in their respective files. I want macro/forumul to collect all the remarks coloum from all users to master files against the respective invoice no.
user file format :
file name temp-1.xlsx
A B Y Z
USER
INVOICE
Remark
Follow-up Date
[Code]......
I have around 50 text files with similar design per attached file. I need to import the text files with criteria below:-
1. include file name
2. let user choose the folder
3. exclude data from "work in process summary" to "work in process cost totals"
4. only have one title in the excel files which all text files is combined "Item, Line ....."
5. If the text files do not have title like "Item, Line, ..." do not import
Is it possible to have all criteria listed above by running a macro?
A.txt
How can I use VBA to open a .chm file. I tried using many different methods but with no success, i.e. openfilename.
View 6 Replies View Relatedi wish my vba program to enable the user to select a file to open from the regular 'open file' dialog box.
in addition, I wish to be able to list the filenames in a user form that have already been saved in a specific directory.
I am trying to view a csv file that has string data, some of them like '395E02'. Excel automatically converts this string into an exponential number. Is there any way to stop Excel from performing the conversion so I can read the number as is?
View 8 Replies View Relatedloop and range function to apply in the below code through which I can avoid writing code for all the rows.
I am trying to open excel files located in single folder from files name (along with the path) in single worksheet (Column B and Row 1 to 500).
I have created follwing code which opens the file and then runs a macro in it.
a Sub Test()
Dim strFName As String
strFName = Sheet1.Range("B2").Value
[Code].....
