Out Of Memory Error Using A User Form
Jan 22, 2007
I have a userform with about 20 multipage tabs, each of which has quite a few text and combo boxes. My problem is I think I have reached some physical limits for the number of controls on the userform. When I try and add code for the userform I get an "out of memory" error.
I thought I have seen some limits on the length of macro code before, but couldn't find them again. If anyone could let me know the limits on userform controls and the number of VBA lines allowed behind the userform, that would be great.
I have tried to put as much of the code as possible in public subs, but there is still a fair amount of code that is associated with things like the AfterUpdate function and I don't know of any other place to put this code. Please let me know if there is another way to put this code in so I don't run out of room.
View 3 Replies
ADVERTISEMENT
Jun 3, 2009
I have recently just encountered a problem where whenever I try and run / edit any part of my user-form code i get the following error:
Compile Error:
Out of memory
The help document then lists about 12 things that could cause this.
My user form code is very small, however the form itself is large, it has a multipage with 12 tabs, each tab then contains between 50 and 100 labels which populate with data from the spreadsheet in the background.
Do you think this size could be causing the error? If not, does anyone have any solutions / ideas?
My hardware / software setup is all ok.
View 9 Replies
View Related
Mar 28, 2007
I have a user form that builds a workbook from one template sheet and information in a SQL Server database. The template sheet contains 4 charts that are copied to every new sheet in the workbook, then their data ranges are set through VBA code. For a while the code was working wonderfully. All the necessary sheets were being generated and correctly populated.
Yesterday I added a new module to generate another sheet and pull data from the same SQL Server tables. Now if I run the userform it will work fine once and create all the needed sheets, and set all the charts to the proper ranges. However, if I delete all the created sheets and run the form again, I get:
Runtime Error '-2147417848 (80010108)'
Automation Error
The Object Invoked has disconnected from its clients
The error consistantly occurs for the following line of Selection.Copy Destination:=Worksheets("Master").Range("D1")
After the error the selected range still shows up as surrounded by a selection box, but if I change sheets, the box moves to the new sheet. Also I cannot select any new cells in the work book. In order to get Excel to work again I have to End Task from the Task Manager just to get it to close. When I restart Excel and go back to my work book I get the same results, i.e. The form works great once, then Excel dies.
I have tried qualifing all of the objects that can be qualified. I have tried setting all possible varriables to Nothing before exiting my macros. Nothing I have tried, or found suggested so far in the forum works.
View 9 Replies
View Related
Jun 24, 2009
If cell K6= "ERROR" I need a message to pop up on screen with the message "Wrong Entry click OKAY to find, Click CANCEL to ignore". Clicking OKAY would simply go to worksheet named "MONITOR". Clicking Cancel would just clear the pop up from on screen.
View 5 Replies
View Related
Feb 16, 2010
Is there a way to save items into memory to be recalled in userforms.
Let's assume that I have a userform called UserForm1 and three textboxes named TextBox1, TextBox2 and TextBox3.
View 9 Replies
View Related
Jun 3, 2006
find the attached workbook
I have a Database and user form, in the user form i have a field named “Vehicle No” this is a combo box from which a user needs to select the Vehicle numbers, and all these are working fine now, I need your help in the following:
When user selects the second field named "Select Vendor name" i need a pop up window which shows all the Vehicles belongs to the vendor which they have selected, and with the popup window user selects the vehicle number then the Vehicle number combo box should be filled.
Currently users have to select by scrolling through Combo box which takes long time and difficult to find by scrolling.
View 7 Replies
View Related
Feb 9, 2010
I have a user form that has a combo box "City" two text boxes one called "Flight" and the other "Date". What I'm trying to do is to prevent the user from saving the data input from the user form if any of those three fields is left blank. The code that I have so far checks all of the required fields, if any are left blank a message notifys which field(s) is left blank and return the focus back to that field. But the rest of code also fires.
What I really need is either to stop the code if any fields are blank and return the focus back to the blank field, the user completes the field(s) and clicks the save again, or better yet, pause the code until all the required fields are completed and then complete the save. (There is actually another 200+ lines of code in this sub, but I deleted it to keep the post a little shorter.)
View 2 Replies
View Related
Jan 14, 2009
I have created a registration workbook for this year's youth sports league. All of the information is entered into a User Form and separated onto it's appropriate sheet designated by the child's age. Next year, I would like to use this year's workbook to look up returning players.
Will it be possible to add a "lookup" button into my form, or create a lookup program, that once the registrar clicks on the correct player, the information is plugged into the User Form, the registrar adjusts the age and any necessary info, presses enter, and the information is copied into the appropriate category in the new workbook? I haven't worked with User Forms long enough to know if they can be filled in that way, but if this can be done, you are the people who would know.
View 3 Replies
View Related
Dec 2, 2008
I'm using a series of user forms for data entry to a workbook, some of them open next stage user form on completion (OK cmd button).
All that is working fine, but I'd like the initial form to close on showing the next one. I've tried adding Unload and Hide commands following the frmInsertEntry.Show (Next stage form), to no avail, but I'd like this user form to close or hide at the end of the sub.
Private Sub cmdContinueType_Click()
ActiveWorkbook.Sheets("Records").Activate 'Select starting cell in record sheet
Range("N3").Select
Do
If IsEmpty(ActiveCell) = False Then ' Search for next empty cell
ActiveCell.Offset(1, 0).Select
End If
Loop Until IsEmpty(ActiveCell) = True
If optDrillType = True Then
frmDrillEntry.Show
Else
frmInsertEntry.Show
End If
End Sub
View 9 Replies
View Related
Feb 27, 2014
I am using the below macro to copy the rows (Starting from Row 2 excluding header row) to another sheet (Starting from Row 2 excluding the header row). I have a huge number of rows which i need to copy to the new sheet (crossing 1.5 Lakh records) which is probably causing "Out of Memory Error: 7" to occur when i execute the below code.
[Code].....
View 14 Replies
View Related
Mar 8, 2014
I experience "out of memory" error after previous vba code is successfully finished. So quick "solution" is to restart Excel.
My current PC configuration:
HP Compaq dx7300 Microtower
Intel(R) Core(TM)2 CPU
6320 @ 1.86GHz
1.58 GHz, 1,99 GB of RAM
View 3 Replies
View Related
Jul 5, 2009
I am trying to convert cells (all in column D) which are separated by "~" into columns. Unfortunately, running the text to columns command on several rows at a time can cause Excel to panic with an out of memory error (error #7 etc.).
The file is ~100mb and contains 500k-700k rows (I have 4GB of RAM so I know this is more a limit of Excel's 2GB RAM constraint).
Can you please help me write a macro to text to column convert each cell in column D?
I tried a macro which started with a for loop, and called the function for each cell individually, but even this led to an out of memory exception after 156,000 rows (although the same macro worked fine on a similar sheet with 700,000 rows).
Are there any other ways of clearing the Excel buffer/temporary space during the function calls to avoid causing Excel to crash?
View 9 Replies
View Related
Aug 20, 2009
I create and delete a conditional formatting rule programmatically. The issue I am facing is when I try to delete the conditional formatting rule that I programmatically created, I ran into the following errors:
1. Exception from HRESULT: 0x800A03EC
2. Attempted to read or write protected memory. this is often indication that other memory is corrupt.
I get these errors only when I have user created conditional formatting rules prior to deleting – I don’t want to delete all conditional formatting rules using FormatConditions.Delete(). Further, I can’t use FormatConditions[index].Delete() because I don’t have a index reference for the one that was created from the application.
Note: I have checked the Trust access to the VBA project object model.
View 8 Replies
View Related
May 24, 2005
i have a macro which is executing some cleaning up and then copying information from project sheets to a summary sheet. the individual project sheets are (currently still manually) copied/moved into the big(ger) overview workbook. to support the work with the individual project sheets they contain a macro that is assigned to some (three) shapes. one part of the cleanup is stripping the macros off the individual project sheets:
' remove the traffic-light macros of the project sheets from all sheets in case of unwanted or uncontrolled "infection"
For CurrentWS = 1 To SheetCount
Worksheets(CurrentWS).Select
ActiveSheet.Shapes.SelectAll
Selection.OnAction = ""
Worksheets(CurrentWS). Range("A1").Select
Next CurrentWS
on the line "ActiveSheet.Shapes.SelectAll" i get frequently (not always... ) a run time error '7': out of memory. it happens on at least two computers. i closed all other SW. according to the windows task manager information there should be plenty of memory free.
questions:
- how to get rid of the error message? OR:
- is there another (more smart) way to strip the ("imported") macros, while keeping the "main" marco alive that does not lead to an error message?
View 2 Replies
View Related
Dec 29, 2006
I have a macro that does a solver routine. I have another macro that runs this solver, then copies and pastes new inputs, then runs the solver, then copies the results and pastes them somewhere, then copies new inputs, etc. It is a long process and it worked fine a few days ago. Now when I run it, about 90% of the way through and then excel crashes. The error says:
Solver: An expected internal error occurred, or available memory was exhausted.
What can I do?
View 9 Replies
View Related
Oct 19, 2006
I'm having trouble releasing a String variable from Memory...
View 9 Replies
View Related
Jun 16, 2009
Fatal error: Allowed memory size of 33554432 bytes exhausted (tried to allocate 71 bytes) in /home/eforum/public_html/search.php on line 1155. I have following macro, what worked just fine in 2003. Now I'm working with 2007 and I can't set up the Microsoft Visual Basic for Applications Extensibility library. Here's the
View 2 Replies
View Related
Oct 25, 2007
I have a spreadsheet with the following headings:
A
Claims Number
B
Name
C
Scheme
D
Admin
E
Date
I need to create a user form that will "pop up" and ask the administrator to enter the above details.
A - should be created automatically (ie last claim number + 1)
B - user enters manually
C - data retrieved from a list
D - data retrieved from a list
E - date is the date the information is entered
View 9 Replies
View Related
Feb 24, 2009
I have a user form that I want to take the information and have it input on the worksheet. I want it to start at A3 and check to see if that cell is "" and if it is not then enter the data from the from horizontally. If A3 is not "" then continue down column A untill the first nonblank cell is and then select that cell and have the data entered horizontally.
I have this code so far but it is not working.
Private Sub cmdSubmit_Click()
Dim Month As Variant
Month = Me.cmbMonth.Value
ActiveWorkbook.Sheets(Month).Activate
I have done a bit of excel programming last year but have not done any for the last 4 months so I am a bit rusty.
View 9 Replies
View Related
Aug 30, 2007
I've written a workbook that enables my workmates to enter sample information easily (workbook attached). What i need help on i cant get the combobox 's on the user form to pick up the related info in worksheet named "data" and insert it into the relavant coloumn in tab named "Results". I can get it to work without using combobox's and just typing the info into a textbox but i wanted to use combobox's.
Another thing i wanted to do was pick invidual results and send them the "Report" for printing. how would i do that.
View 14 Replies
View Related
May 25, 2008
I have a project, i want to create a user form, basically i have a work book that contains dinner menu's on column A and ingredients in column b.
I would like to create a user form that have a drop down box that would show all the possible menu's referencing my workbook sheet1 column A values. and by selecting a item, i would like to be able to show all ingredients needed, is there a way to do this?.
I hope so, it would be so cool to do this.
View 11 Replies
View Related
Jun 22, 2009
I have created a multi utility user form that user can initialize by a shortcut key. The problem if user want to see the content on sheet or want to change the active cell, he has to close the form and then do any action. This form is initialized by a command and default included in excel as a Add-in. Is there is any way to make the form floating i.e. user can manipulate the data and can see the form as well.
View 4 Replies
View Related
Jul 8, 2009
On a userform, I have 5 paragraphs of text that the user needs to read. The problem is the user can't see all 5 paragraphs, the user is only able to see about two paragraphs. I don't want to make the userform larger but I would like to add some type of scroll bar that would allow the user to scroll up and down to view all of the text.
View 7 Replies
View Related
Dec 20, 2009
Can anybody help me with a code that shows a comment within the user form when specific a checkbox is selected?
I am attaching a sample file with user form containing 6 checkboxes. I need when Name6 is selected, a comment "Test" to appear inside the user form beside the checkbox.
View 6 Replies
View Related
Apr 6, 2007
I have created a user form (thanks Datsmart), and now need to place the data that will be inserted in that userfom onto my spreadsheet.
The spreadsheet will have 50 rows, each containing a different project. There will be a button on each row to activate the user form for that specific row. They click the button on the spreadsheet, and the user form opens. They enter the data on the user form, and once they click the "add comment" button on the user form, the data should be entered in the last cell of the row on which the button is located.
Now the complicated part:
The users will use that for to update the project from week to week, but each week's comment needs to go in the same cell, but above the previous comment.
IE:
Week 1
Jan 1: Project lauched
Week 2
Jan 6: Project budget submitted
Jan 1: Project lauched
Week 3
Jan 22: Budget approved
Jan 6: Project budget submitted
Jan 1: Project lauched
The date being the date from the user form, and the comment being the comment from the user form. If the latest date can be bolded that would be a bonus.
They each have to go in the same cell cause all relate to the same project. This same thing will be repeated 50 times for each different project.
View 9 Replies
View Related
May 24, 2007
I came here yesterday asking for help and was helped immediatly, but I have another question/problem. I got my user form up and running, however I've just been informed that the form has to be able to be printed out. So basically I need this user form with all the data on it and I need it to be printed.
Is there a way to add a command button perhaps that prints out the form with the data on it? (Ex: Imput Data, hit Print command button, have an electronic and hard copy of the information)
View 9 Replies
View Related
Oct 16, 2007
I have a user form with 2 textboxes (used as parameters for an ODBC query). The entry should be a period, as yyyymm. How can I check, for instance when clicking the Ok button after entry, that both textboxes are of the "000000" format and the last 2 numbers are between 01 and 12?
View 9 Replies
View Related
May 10, 2009
I have the following code in a user form....
Private Sub cbSearch_Click()
Dim Product As Range
Set Product = Sheets("Master").Range("A1:A300").Find(Val(tbLookFor), lookat:=xlWhole, LookIn:=xlValues)
If Product Is Nothing Then
MsgBox "Incorrect Product code, try again"
Else
'Populate the userform with data
Dim counter
counter = (0) + 1
Label35 = counter
tbData1 = Product.Offset(0, 1) 'Down 1 row, over 1 column
tbData2 = Product.Offset(0, 2)
tbData3 = Product.Offset(0, 3)
tbData4 = Product.Offset(0, 4)
etc, etc, etc
I need the counter to increase every time a search is performed, at the moment it only does one count, no matter how many searches are performed.
What do I need to add to the counter part of the code for it to increase by 1 every time?
View 9 Replies
View Related
Nov 23, 2009
I have a user form that places data in the proper place, although I don’t have a way to update this data at a later time, other than going to the row and scrolling through the columns that need to be updated, of course my boss really doesn’t want to look at row and columns.
What would be cool is if the user could select a row by double clicking the row number so as to highlight the row, I have a search function that they could use to find the proper row of data. Then have the data go back into the user form to either be changed or to fill in other textboxes that were left blank the first time. For instance, this example is about automobiles, the user wants to populate fields about MPG or repairs made at EOY.
Private Sub cmdAdd_Click()
Dim iRow As Long
Dim ws As Worksheet
Set ws = Worksheets("Sheet1")
'find first empty row in database
iRow = ws.Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Row
'check for a Make
If Trim(Me.txtComboBox1.Value) = "" Then
Me.txtComboBox1.SetFocus
MsgBox "Please enter a Vehical"
Exit Sub..........
View 9 Replies
View Related
May 27, 2006
I am trying to put an image on a user form for the first time and am unsure how to do this. Is there a way to cut and paste to the userform?
View 2 Replies
View Related
