Output Used Range To Text File
Oct 9, 2007
I would like to output the text I perpared in " sheet 1" into a text file, "output.txt"
The imformation I like to output start from coulmn C, and column D then column E.....
The numbers of rows in each column could be different, and also there may be some single empty column in between. The totals numbers of coulmn is unknow.
the text in the output.txt should contant all the imformation in the sheet started from column C, coulmn D, column F.... (if coulmn E is empty). and the text in the output.txt file is continues with no gap in it.
To make it even more powerful for later use, The column that begin with NOT should not be output.
Example:
Excel Data-
A____B____C____D____E____F____G____H____I____J
1a....1b.....1c.....1d............Not.....1g
................2c.....2d............2f......2g
........................3d............3f......3g
........................4d
output.txt-
1c
2c
1d
2d
3d
4d
1g
2g
3g
View 4 Replies
ADVERTISEMENT
Jun 26, 2014
I am working on a VBA routine that calc and verifies hash files for a series of folders and sub directories, using a command line prog called exactfile.exe (exactfile.com). It is very similar to M$'s FCIV utility, but it is actually supported on Win7/Win8. The issue I am having is that I cannot get the standard output/error/console stream to redirect to a text file. I've written the routine multiple ways, trying to figure out redirection. I was using this site
HTML Code:Â [URL]....
as a reference.
Here is my VBS approach. This code is dependent on another sub passing folder_name as a string
[Code] .....
The VBS then executes using wscript, however, since exf.exe does not return an exit code the same way FCIV.exe does, I need the results redirected to a text file. The results vary from a single line saying "No errors." or multiple lines indicating which files do not match their original hash.
Here are a couple iterations of my BAT approach, where i use the BAT to call the VBS. I really thought I would be able to use the standard redirect > here, since the executable is launched using cmd.exe, but I've not gotten the results I want.
[Code] .....
I've scoured more pages than I can count, but no approach seems to work, so far.
View 4 Replies
View Related
Feb 7, 2009
I use excel to read in an ASCII data file in which every line beginning with H is a header line and lines beginning with S are data line.
I want excel to filter out the header lines and output the file with the data lines only then outputs these in a new file.
I also want it to read the values from column 72 to 75 and subtract 6 from them then output them again to the same new file.
Sub read()
Open "d:/intouch/0502SPSS.LOG" For Input As #1
Dim i As Integer
Dim lines(9999) As String
i = 0
Do While Not EOF(1)
Line Input #1, z
i = i + 1
If Mid(z, 1, 1) = "H" Then
i = i - 1
ElseIf Mid(z, 1, 1) = "S" Then.................................
the problem is that the new file is generated but it is always empty
View 9 Replies
View Related
May 21, 2008
I'm outputting some cells to a CSV. At first I tried using the SaveAs function but that renamed my worksheet and didn't work for ranges (as far as I know)
Sub Export()
'Set myADPFile = "C:ADPPCPWADPDATAPRSHWEPI.CSV"
Dim myADPFile As String
myADPFile = "C:PRSHWEPI.CSV"
Dim x As Byte
x = 5
Open myADPFile For Output As 1
While (Not (Sheet3.Range("A" & x).Value = NA))
Print #1, Trim(Sheet3.Range("B" & x).Value), ",", _
Trim(Sheet3.Range("C" & x).Value), ",", _
Sheet3.Range("D" & x).Value, ",", _ ..........................
The values are correct. However, the excess amount of spaces is not. Using the Write function just encases everything in quotation marks. Replacing spaces isn't a good solution because the first row MUST be in that format, and removing all spaces would require more code to put spaces back in. Is there a way to get rid of all the excess spaces surrounding each value?
View 2 Replies
View Related
May 19, 2014
See attached image.
So what I am looking for is to put a macro behind button 1 which will do the following
Enter A Default Value Of 123 In The Yellow Boxes (B7:K7)
If They Are Blank When The User Clicks The Button
Performs A Search And Replace To Replace The Values 01-01-1990 With B8, 02-01-1990 With C8 Etc Until K8
Output The Contents Of Sheet 2 To A Text File (In XAI Format) In The Following Order A1:A100, B1:B100, C1:C100
[Code] .........
View 1 Replies
View Related
Apr 23, 2013
Excel 2010, I have the following list (showing part of it):
Name
T-Shirt Sizes
Nathan
S
[Code]....
The aim of the list is to see what Sizes each and every person needs and then count how many T-Shirts are required for that particular size. The list is over a 100 entries long so counting it manually isn't really an option as it's time consuming as well as errors might arise.
Thus, I've been trying to use the IF statement with the following logic but to as no avail
IF Size in Column is XS
Add 1 to a particular Cell
IF Size in Colum is S
Add 1 to a particular Different Cell
and so on for the other sizes...kind of like a counter for a for-do-loop.
View 2 Replies
View Related
Aug 12, 2008
I am making a report that puts out a CSV file my trouble is that some of the numbers are converted to date when they are opened in excel. This report is sent out company wide and I need a way to keep the numbers from changing to date. I have added a tic(') mark to the front of the number but it comes over as '12308. What can I do.
View 9 Replies
View Related
Jul 1, 2006
I'm wondering if it's possible to use a button in excel where I can output a cvs file (from another sheet in the file) with just a click on that button.
View 3 Replies
View Related
Apr 23, 2006
I have a text file output from a program that is named “ABC123.exp”. I open up the file with Excel and after manipulating the data with VBA code which includes identifying the Source Path directory(strSourcePath As String ) and the File name (strFileName As String) I want to be able to open up a 'Save As' Window and save the manipulated data into the same Source Path directory(strSourcePath) with the File Name being the prefix of the original with a suffix .txt extension. Ex: “ABC123.txt” instead of “ABC123.exp” and the Save as type: Text (Tab delimited)(*.txt). This way my original data won’t be overwritten.
View 5 Replies
View Related
Dec 3, 2009
Table 1:
I like to go to Berlin.
You like to move to Amsterdam.
They want to see Chicago.
When will the reach San Francisco.
Table 2:
Amsterdam
Chicago
San Francisco
Berlin
What I want to do:
I want my function to see if the text in Table 1 contains a value in Table 2, and if yes, output that value.
Desired Result:
Row A1:
I like to go to Berlin.
Row A2:
Berlin
Row B1:
You like to move to Amsterdam.
Row B2:
Amsterdam
View 9 Replies
View Related
Jun 5, 2006
I'm trying to display some result in my sheet and I don't go further of the MsgBOx use. see my vba code
Dim xslt As New MSXML2.XSLTemplate40
Dim xslDoc As New MSXML2.FreeThreadedDOMDocument40
Dim xmlDoc As New MSXML2.DOMDocument40
Dim xslProc As IXSLProcessor
Dim paramxml As MSXML2.DOMDocument40
xslDoc.async = False
xslDoc.Load "c:compara.xsl"
If (xslDoc.parseError.errorCode <> 0) Then
Dim myErr
Set myErr = xslDoc.parseError
MsgBox ("Ha um erro " & myErr.reason)
Else
Set xslt.stylesheet = xslDoc
xmlDoc.async = False
xmlDoc.Load "C:Instructional_program.xml".................
View 2 Replies
View Related
Jul 10, 2006
I'm trying to parse an output file from x-12-arima using vba. The file is in this format
.....
invalidate the results of this test For the last three year period.
ICMETI, Total Inventories Communications Equipment PAGE 9, SERIES foo
D 12 Final trend cycle
From 2002.Jan To 2005.Dec
Observations 48
Trend filter 13-term Henderson moving average
I/C ratio 1.08 .............
View 5 Replies
View Related
Apr 9, 2014
I have developed a user form in VBA which is used for entry into an excel worksheet. From this data, I need to do the following:
1) Create 2 output files for Job data entitled "J" and another file entitled "S". The "J" and "S" is captured in a field in the data. I need to hit a button that allows these 2 output files to be produced, so I need to 'loop' through rows of the data to do this/
2) In addition to 1), the user needs to be able to 'select' the date range they would like to see 'J' and 'S' data over. This will be based on a field called "Startdate'. How could I do this with the button above-can I parse an input value to a form and select the 'J' and 'S' files on this.
View 1 Replies
View Related
Feb 3, 2014
I have a spreadsheet that I drop data into and it updates a set range on the sheet. I than have to copy that range in to notepad and save it under the name "Hourly Team Stats - 2-2-14" on our companies shared drive. If the file is already there, I have to add the data to that file rather than create a new one.
I am looking for macro that check to see if the file has already been created, if not create a new one. If it does exist, add the range to the file. If you need the path its F:Team Stats.
View 6 Replies
View Related
Sep 18, 2009
I have an existing spreadsheet with a column of strings (actually VIN numbers). These numbers correllate to a bunch of text files, that can exist in one of three folders (UsernameDesktop1, 2, or 3) on my desktop. What I need the macro to do is:
1) get the filename from A2 (A1 is a heading row)
2) Find the appropriate text file in one of the three folders
3) Put the folder name into I2
4) Scan the text file for some strings, and copy some data that follows those strings into J2:O2 (I can handle programming this)
5) Close the text file
6) repeat above for the remainder of filenames (about 1800 files)
View 3 Replies
View Related
Oct 30, 2008
I'm trying to automate the process of exporting a range of cells to a text file. I think the Print# command will work because I don't want the quotes at the end of each line. Each range of cells will be a separate text file, and I want to save and name the file according to the column it's in. This bit of code from dominicb seems to be what I'm looking for, in principle.
View 5 Replies
View Related
Nov 12, 2012
I do have the below code to safe a file and close it:
Sub Save_Close()
'
' Save_Close Macro
'
'
ActiveWorkbook.Save
Application.Quit
End Sub
I would like to do additionally something else. I need a macro to do the above, but it should first check if cells A2:C9 do contain text. The text could be anything.
If there is text in ALL the cells, then the macro should save and close the file. If there is text missing in at least one of the cells, a message box should appear saying 'Please fill out all cells'.
View 3 Replies
View Related
Mar 4, 2010
I also use VBA in a terminal emulation program that I use the following command to 'screen scrape' the current display memory and quickly Save it to a .txt file:
.SaveDisplayMemory "C:File1.txt", rcOverwrite
What I want to do in Excel is, Copy the current selected Range() and Save it to a .txt file.
I know how Save the current Sheet to a .txt file, but can't figure out how to Save just a Range() of cells.
View 9 Replies
View Related
Nov 15, 2008
I'm trying to have it output certain symbols such as "Ó" and I can't quite figure out how to do it, i want it to basically write in the selected cell:
"Ó of " & a & "'s = " & b
where a and b are strings... my problem is i cant figure out how to have it output the sigma but keep the letters from going into symbol or windings...
View 6 Replies
View Related
Aug 18, 2006
i am currently working on a macro that will make an average number of days. my problem is that when the macro runs it works fine and does what is is supposed to but becuse some fields do not have numbers in it returns the #value! back in the output box. I need some way of getting rid of this, or changing the boxes without numbers to 0 automatically.
View 3 Replies
View Related
Jul 19, 2013
I am trying to write the code to;
1) change to a different sheet
2) select a specific cell range
3) save that range as a text / xml file with a filename derived from a cell outside the given range
Here is where I have got to so far, but it fails
Private Sub Export_Click()
Sheets("Parsed Data").Select
ThisFile = Range("B1").Value
ActiveWindow.SmallScroll Down:=-15
Range("A1:A41").Copy
SaveAs Filename:=ThisFile, _
FileFormat:=xlTextMSDOS
Application.WindowState = xlMinimized
End Sub
View 2 Replies
View Related
Nov 8, 2008
That does allow me to filter the output in Master, but ideally what I would want to do is not have to set aside 300 lines in the Master file for each of the Staff files. Conceptually, I'd like to have the spreadsheets Staff A, Staff B, etc. look for and export only lines which have data in them and then have Master bring those lines in automatically. This may not be possible, in which case your suggested solution is the best approach.
View 9 Replies
View Related
May 30, 2009
Need coding of command button to output text based on the contents of combobox1 and combobox2. The text should be placed in the next available cell starting in cell b3 for combobox1 and starting in cell c3 for combobox2. Each time submit is clicked the name and number associated with that name should go in the next free cell in the spreadsheet.
So for example the user choses name1 and number6 cell b3 would read name1 and cell c3 would read number6 after submit is clicked. The user then choses name58 and number12 and presses submit again cell b4 would read name58 and cell c4 would read number12.
View 4 Replies
View Related
Feb 11, 2010
I want to set my output range to start at row 25 Set Findit starts counting cells from row1.
View 2 Replies
View Related
Oct 9, 2007
I'm trying to output a couple columns (and 300 rows) to a csv file. This code works wonderfully, save for the fact that it doesn't igore any cells in the range that are empty.
how I can get it to ignore empty cells?
Public Sub textFileDelim()
Const DELIMITER = ","
Const MYFILE = "E:EricTesting Folder2_Thurs.csv"
Dim Last_Column As Integer
Dim Last_Row As Long
Dim Row_Loop As Long
Dim Column_Loop As Integer
Dim FileNum As Integer
FileNum = FreeFile
View 4 Replies
View Related
Apr 8, 2013
After organizing my data I now need to export to a simple txt file. But I need to control to final format better then the simple "save as" allows. What I need is a simple list of in a single column, separated by a carriage return. I am working with a "small" list of addresses, and by small I mean 27,188.
Every format I try ends up with quotation marks and a strange box like symbol. What I have is a full name and 2 line address per field in .xlsx format. I also have the data separated into fields by line.
Is there any way to better control the output when exporting to a .txt file?
View 2 Replies
View Related
Jan 8, 2010
i am trying to create an Array that will print the stock number as a title on row A. e.g. "Stock 1" in A2 "Stock 2" in A3...etc. here is what i have attempted:
View 2 Replies
View Related
Oct 2, 2012
I've in cell A1 an entry like this: 123*456*7890
=SUBSTITUTE(A1) in cell 'A2' gives me: 1234567890
=ISTEXT(A2) in cell 'A3' gives me: TRUE
BUT, =A3+1 gives me: 1234567891
Hows that happening? Substitute function gives me the output which is a TEXT, and how is it that when I add 1 to it, I get an answer? Shouldn't I get a #VALUE! error instead?
View 2 Replies
View Related
Dec 24, 2013
I have a column with lots of tube station names. I have a look up table with the tube station name, and the possible lines that pass by that tube station.
One tube station may be covered by more than one tube line.
I am looking for a formula that will output every tube line that caters that one tube station.
first question, what is the best way to organise the data in my look up table.
Second, is a vlookup the best formula to achieve the output I want? i.e. Reflect how many tube lines cover each station
see table below: If the station name has only one tube line, Vlookup works fine. When the station, such as Canno Street, has two tube lines, Vlookup only picks up one tube line. If I duplicate Cannot street under the station name, the Vlookup picks only one tube line.
LOOK UP TABLE A1 - station name
B1 Tube line name
Cannon Street
District
[Code].....
Is there a formula that will output the data of the second tube line name in column D1?
View 3 Replies
View Related
Oct 9, 2006
I have a spreadsheet with Approx 900 rows of information that has been entered incorrectly.
Spreadsheet has 6 columns.
Contact Name
Contact Number
Company Name
Company Account Number
Order Date
Order Numbers
Every Order should have its own line - However I have approx 900 rows where the order numbers have multiple entries instead of single entries.
All the order numbers end "LO" and there all 8 digits long.
I wanted to know if its possible to use excel to look for all instances of "LO" in the column Order Numbers and delete the original Row and replace it with 3 rows with the same information.
Example:
Attached to this post!
I have 15 historic files each approx 35000 rows and I suspect there are more errors
View 9 Replies
View Related
