Output Range To CSV With No Blanks

Oct 9, 2007

I'm trying to output a couple columns (and 300 rows) to a csv file. This code works wonderfully, save for the fact that it doesn't igore any cells in the range that are empty.

how I can get it to ignore empty cells?

Public Sub textFileDelim()

Const DELIMITER = ","
Const MYFILE = "E:EricTesting Folder2_Thurs.csv"

Dim Last_Column As Integer
Dim Last_Row As Long
Dim Row_Loop As Long
Dim Column_Loop As Integer
Dim FileNum As Integer

FileNum = FreeFile

View 4 Replies


ADVERTISEMENT

Convert Row Range With Blanks Into Continuous Row Range

May 16, 2008

How would you turn

A | B | C | D | E | F | G

1 2 3

into

A | B | C |

1 2 3


A | B | C | D | E | F | G

1 2 3

A | B | C |

1 2 3

View 9 Replies View Related

Set Data Output Range

Feb 11, 2010

I want to set my output range to start at row 25 Set Findit starts counting cells from row1.

View 2 Replies View Related

Output Used Range To Text File

Oct 9, 2007

I would like to output the text I perpared in " sheet 1" into a text file, "output.txt"

The imformation I like to output start from coulmn C, and column D then column E.....
The numbers of rows in each column could be different, and also there may be some single empty column in between. The totals numbers of coulmn is unknow.

the text in the output.txt should contant all the imformation in the sheet started from column C, coulmn D, column F.... (if coulmn E is empty). and the text in the output.txt file is continues with no gap in it.

To make it even more powerful for later use, The column that begin with NOT should not be output.

Example:
Excel Data-
A____B____C____D____E____F____G____H____I____J
1a....1b.....1c.....1d............Not.....1g
................2c.....2d............2f......2g
........................3d............3f......3g
........................4d

output.txt-
1c
2c
1d
2d
3d
4d
1g
2g
3g

View 4 Replies View Related

Sum Range And Ignore Blanks?

Jun 25, 2012

I need to perform the following calculation:

=FTEST($A$2:$A$30,$B$2:$B$30)

The problem is that this statistical test needs to have pairs and sometimes the ranges won't all be filled or paired. For example, column A may have 15 rows while column B may have 20. So in this case I would need to only add A2 through A15 and B2 through B15.

Is there any any that can be done?

View 4 Replies View Related

How To Work With A Range That Has Blanks

May 28, 2007

Using the following bit of code that will Select the whole range of A2:C2 all the way down to the last row:

ws2.Range("A2:C" & ws2.Range("A2:C2").End(xlDown).Row).Select
How do I get around it if there happens to be a Blank cell(s) within the range.

I still need to work with the range even though there may be blank cells.

View 9 Replies View Related

Count Non Blanks In A Range

Jan 26, 2009

I have use for this function on varying ranges. I pasted my function as well as my call to it. PhasesActive is just a named range of 5 cells. I get an error... by ref argument type error. Something with the argument, do I have to name the worksheet the range is on?

Function RangeValueCount(Rng As range)
'The function to check if a range has more than one value marked for 'selection, ex: The phases choices

For Each cell In Rng
If Not IsEmpty(cell) Then
RangeValueCount = RangeValueCount + 1
End If
Next cell
End Function

Call RangeValueCount(PhasesActive)
If RangeValueCount > 1 Then
msg = "There appears to be multiple phases selected. Please select only" & vbNewLine
msg = msg & "one phase at a time"
MsgBox msg
End If

View 9 Replies View Related

Output One Instance Of Smallest AND Largest Value In A Range

Dec 5, 2013

I am looking for a formula that will output the highest and lowest value in a range. Column A contains a range of numbers, some of which repeat and in column B i'd like to extract ONE instance of the highest and lowest value in Column A, preferable the last instance.

See example below and in column B the desired output.

Column A
160
90
120
90
120
160

Column B
blank
blank
blank
90
blank
160

View 5 Replies View Related

VBA Function: One Range As Input, Two Ranges As Output

May 10, 2006

I want to pass an array to a function, and am unclear how to do it. For example, the following declaration does not work:

Public Function xyz(a() as Variant) as Double

There is an additional requirement that I would like the output also to be a range of the same dimensions, typically one column and 100 rows. Is this possible?

A further twist is that the function I am writing calculates two values for every element in the input array and I need the output of them both.

An inelegant solution would be to write two separate functions, but I was wondering if it is possible to get two array outputs from a single function.

View 7 Replies View Related

Summing A Range - Omitting Blanks

Apr 30, 2009

Trying to do the following. Look at a range of cells in a row, say A1- H1. Sum the last three cells that have a number in them versus being blank. So, let's say the last numbers in row 1 are in cells B1, F1 and H1, but in row 2 they may be in cells E2, F2 and G2.

View 3 Replies View Related

Select All The Blanks In A Range And Delete Them?

Feb 25, 2014

I have data that gets seperated into different cells and what i need is for all the data to line up from left to right with no empty cells in between.. so basically shift delete on each cell and shift the data left.

So i thought i know, ill simply f5, select the blanks, delete and shift left... however that option doesnt come up.. it simple says delete row?

What is the best way to select all the blanks in a range and delete them and have the cells that contain data move to the left so all data is next to each other.

View 1 Replies View Related

Concatenate A Range Skip Blanks

May 22, 2009

I have copied the following codes to create a Function of "Concatenate a Range Skip Blanks". However, I humbly seek help to add "," in between every word and also take away the empty space when there is only 2 words are concatenated. Pls refer to my attachement for easy understanding.

View 6 Replies View Related

VBA To Fill Blanks In A Range With A Formula

Mar 16, 2008

I am in need of a solution (probably VBA) that can fill a range of cells with a formula IF they are blank. Ideally that range is a named range I can define in Excel. If that is too hard, then a hard coded column I hand-edit the script for is tolerable. Also, ideally, this script auto-executes whenever data changes on the sheet.

You formula I will populate is:
=IF(ISNA((VLOOKUP(B33,$A$32:$L$43,12,FALSE))+1),"",(VLOOKUP(B33,$A$32:$L$43,12,FALSE))+1)
..but a simpler formula can be stubbed in.

NOte that it does have relative references, so the script needs to adhere to normal EXCEL conventions of enumerating cell references.

If the script points to a refernce cell that contains the formula that is uber.
Maybe it should do copy and paste instead of a string replacement in order to leverage EXCEL's referencing?

I'm stuck on this, and this would be VERY useful for many of my sheets to be able to point to a refernce cell containing a formula to fill in.

View 9 Replies View Related

Count How Many Blanks (false) In The Range

Jul 15, 2008

i have a sheet with many formulas on it some in a range are if statements which output a blank ("") if the condition is not met i.e. false.

i need to be able to count how many blanks (false) in the range

View 9 Replies View Related

AVERAGE Without Range Ignoring Blanks

Jan 4, 2009

Trying to determine the best way to do this. I understand that the standard AVERAGE function will ignore blanks if given a range; the function I'm using does a search for a particular value to determine if a value is to be included in the averaging: ...

View 9 Replies View Related

Count Blanks In Dynamic Range

Feb 25, 2010

I want to count blanks in a horizontal range (all in one row) that will change (dynamic range). The values in the range could be numbers or words. Some values may be added to the end, but there may still be some empty cells to the right of the last value. My goal is to count blanks in the range up to the last entered value, but no beyond that. As an example:

A6 = 2
B6 = empty cell
C6 = 2
D6 = empty cell
E6 = tt
F6 = empty cell

The range for the count blanks would be A6:E6. F6 is not included because the last entered value is in cell E6.

The answer (count blanks in dynamic range) should be 2.

I have got these 3 formulas to work, but it seems that there must be a better (shorter, faster calculating, more elegant) formula than these:

=COUNTBLANK(OFFSET(A6,,,,MATCH(9.9E+307,MATCH(A6:F6,A6:F6)+TRANSPOSE(ROW(INDIRECT(""1:""&COLUMNS(A6:F6)))))))

=COUNTBLANK(OFFSET(A6,,,,MATCH(9.9E+307,MATCH(A6:F6,A6:F6)+{1,2,3,4,5,6})))

=COUNTBLANK(A6:INDEX(A6:F6,MATCH(9.9E+307,MATCH(A6:F6,A6:F6)+TRANSPOSE(ROW(INDIRECT(""1:""&COLUMNS(A6:F6)))))))

View 9 Replies View Related

Display Last Cell In Range With Blanks

Sep 26, 2006

How can I get the last cell with data, show in other cell? For example last cell populated info in total cell.

Date Cases Within 30 Days
01-Sep-0622.83
02-Sep-0622.78
03-Sep-06
04-Sep-0622.86
05-Sep-0622.82
06-Sep-06
07-Sep-06

Total22.82

View 3 Replies View Related

Stop Blanks In Entry Range

Nov 1, 2006

I have created a worksheet with different validation rules for different columns for users to enter data. Is there a way I can make it so each cell must be filled in? I don't want any blank cells. Is it possible to create some so that the user must fill in the cell before moving on to the next cell.

View 9 Replies View Related

Sort Range By Column Containing Blanks

Aug 14, 2007

I have some trouble to find a solution to sort blocks of data, the blocks have multiple headers and i would like to sort by the user column C.

I have attached a sample to easier understand my ramblings.

View 4 Replies View Related

Dynamic Named Range Without Blanks

Jun 17, 2008

I need to populate a cell with a dropdown list via data validation. The source is a list that contains blanks both in between data and at the end of the list. Like this:

John
Peter
(BLANK)
Ann
(BLANK)
Carol
(BLANK)
(BLANK)
(BLANK)
etc.

The blank cells are actually not empty, but contains formulas (and I therefore assume I cannot use COUNTA for leaving them out).

Anyone knows how to create a source list for the data validation dropdown list that leaves out any blanks (containing formulas) in the middle and the end of the range?

View 4 Replies View Related

Loop Formula To Search Through Range To Get Expected Output?

Feb 14, 2014

Trying to look for formula for searching through Range and search through Data to achieve expected res

Data Output ExpectedRange
Pune 123 is city Pune 123 Mumbai 999
Maharashtra 345 is state Maharashtra 345Pune 123
India 678 is Country India 678 Nagpur 666
Maharashtra 666 is state OthersPune 555

Below is the query i used for manual search however need formula to see through Range and achieve output expected

=IF(ISNUMBER(SEARCH("Pune 123",A5)),C5,
IF(ISNUMBER(SEARCH("Maharashtra 345",A6)),C6,
IF(ISNUMBER(SEARCH("India 678",A7)),C7,"Others")))

View 5 Replies View Related

VBA To Output Column Of Dates Within A Range For Multiple Ranges

May 21, 2014

I need a 'simple' vba that outputs all the dates in a range that correspond to a particular ID in a column as well as that same ID in a column beside the dates.

So basically using the data in columns A to B as input, to get columns E and F as output.

Also, for a lot more than just 3 IDs.

View 3 Replies View Related

Custom Code To Output Cell Range As String

Nov 19, 2013

I have come across this wonderful piece of code that kind of accomplishes what I am after, to a point. Though I would like the output string to be displayed with a few extra characters.

Code:
Function Concat(rng As Range, Optional sep As String = " , ") As String
Dim rngCell As Range
Dim strResult As String
For Each rngCell In rng
If rngCell.Value "" Then
strResult = strResult & sep & rngCell.Value
End If

[code].....

I want the output to be:

["cell1" , "cell2" , "cell3" , "cell4" , "cell5"]

View 2 Replies View Related

Ignoring Blanks In A Dynamic Named Range

Oct 7, 2008

I used each of the following codes for dynamic name ranges.

View 4 Replies View Related

Count Blanks In Range With Another Dynamic Conditions

Mar 15, 2013

Assume this Data in a spreadsheet

I want to count blank "PI" based on "Product name" & "Product date" occurence together

So I created intermediate field "IS Blank", and I dunno what formula can give me the below results

My obective to get this result
CountBlank for PI = 3

--------------------------------------------------------------------------------
Product Name..... Product Date.... PI...... IsBlank "PI" [Desired Formula output]
xxx .......................ddd ...............Blank.................. 1
xxx .......................ddd ...............Blank.................. 0 (counted above for same xxx&ddd)
xxx .......................ddd222 ..........Blank.................. 1 (PD changed to ddd222)
yyy ......................ttt............... Blank....................1 (another product,yyy)
yyy .....................ttt ...............Blank......................0 (same product and date, so not counting again)

View 9 Replies View Related

Have Output Cell Of ActiveX Combobox Link To Named Range?

Apr 22, 2013

=AVERAGEIFS(MFI,DATE,">="&JanStart,DATE,"<="&JanEnd)

MFI is the named ranged that is referencing a column of data. This works, but I want to be able to change the MFI to a different named ranged.

So what I am trying to do is using an ActiveX Combo box so I can reference the named ranges that I have set, for example MFI, so each time a user chooses MFI or another named range, it will output to a linked cell (A1). Then the linked cell will be referenced into this forumla.

=AVERAGEIFS(A1,DATE,">="&JanStart,DATE,"<="&JanEnd)

Is it possible for A1 to be linked to the named range, so if the user choses MFI in the combo box, it will change all AverageIFS formulas to look at a different named range.

View 3 Replies View Related

Load Only Non-Blanks From Range Into Data Validation Dropdown

Dec 12, 2013

On the Control Panel sheet of the attached book, I need to load only the non blank cells from BQ3:BQ9 into a data validation drop down.

View 8 Replies View Related

Filter Named Range Excluding Zeros Blanks

Sep 29, 2011

Im trying to filter a name range of 12 columns in vba. However im able to emit ZEROS but NOT blanks when i usse AutoFilter Field:=12, Criteria1:="0" it stil contains some blanks in the filtered data

View 1 Replies View Related

IF Formula - Get Average Of Only Values In That Range Not Including Blanks

Nov 21, 2011

I am looking for a formula for the following:

If there is nothing is U6:W6 return blank

Otherwise sum the contents of Bf6:BH6 and divide by the number of cells that are not empty in the range U6:W6 (to get an average of only the values in that range not including blanks).

View 3 Replies View Related

Drop-Down List With Variable Range And Hiding Blanks

May 4, 2007

I currently have a list on a worksheet named "Options". It is a named range entitled "Type" with rows A2:A500. Another worksheet uses "Type" as a drop-down list. Currently there are only five entries in the list - cells A2:A6. Other items will periodically be added to the list. That is the reason for the long range - up to A500.

In the drop-down list, all of the unused cells in the named range show up as blanks. Is there any way to not have the blanks show up in the drop-down list?

Or...

Is there a way to define the named range as a variable range to enable users to add items without redefining the range and have the added items automatically show up in the drop-down list?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved