I have a userform that has a number of cascading comboboxes, however i wish to use the same cascading feature in a number of other userforms. So what i am trying to achive is calling the cascading element from a public macro, to do this i need to pass the userform name to the procedure. The snippet of code i am using is:
Private Sub ComboBox1_Change()
If ComboBox1.Value <> "" Then
myform = Me.Name
myform.Label2.Visible = True
myform.ComboBox2.Visible = True
myform.ComboBox2.RowSource = Range(myform.ComboBox1.RowSource).Cells(myform. ComboBox1.ListIndex + 1, 1)
how is the best method to link up forms to "talk" to my modules? (aka set variables inside my module script)
the way i understand it with my C++ background, it seems like separate forms and modules act much like private declarations do inside class calls.
I know that in C++ i can declare a friend class to grant access to communication between classes... and i'm wondering if such a procedure is possible in VBA as well...
or to break it down for those not familiar with C++, quite simply, is there a method of code i can implement to have different user forms and modules to talk to eachother? as it seems that any variable declaration is all inclusive to that one object.
The only way i can think of passing variables is by having my code create a worksheet, paste variables one by one into cells, bounce to the destination module, and import those declarations one by one through the cell contents, and remove the sheet after use...
I know i can do it that way, but i really dont want to as that is pretty darn sloppy, and a mickey mouse way to tie my program together.
I am trying to set public variables from an event handling procedure based in a worksheet so I can use that variable in a userform. Nothing I have tried works no matter where I declare the variable. I am using a msgbox to display the variable (a range) but it shows as blank regardless of whether I place the variable in a module, this workbook object or in the sheet object where the event code is placed.
I am sure there is a simple way to transfer variables from the sheet's code (where it must remain as the variable depends on the target cell's position that triggers the event).
I have a procedure that I want to pass two arrays to. When I pass a single array it works fine but as soon as I try to pass two arrays I get a syntax error. Both arrays are declared exactly the same way and are used in the same way. Am I limited to passing only one array per procedure?
I want to put some colour in the cells B2, B3, B4, B5, etc and a put black the edge of every box. For do that i make a subrutime that put some color in the range that i want (only if i write "B2" or "B2:B5"), but if i want to put a black edge in all the box i can't do "B2:B5". Then i tried to do something like:
For i=2 To 5 Step 1 Call Boxcute(ActiveSheet.Cells(i,2)) Next i
Sub Boxcute (Box As String) Range(Box).Selection etc. End Sub
I need to pass range information (eg. WorkSheets("abc").Range("A1") as text or ??) from a cell (ie the above text is in a cell on some worksheet, say "XYZ") to a VBA procedure or could directly use it in the procedure, similar to...
Sub MyProc(RngInfo as string [or?]) dim RRng as range Set RRng= RngInfo ??? it is this part I'm really not sure how to do
where RngInfo is a worksheet that has a "named" cell that contains the above cell with the indicated range in it.
eg. RngInfo is worksheets("XYZ").Range("D1") where D1 contains the text (or ?)WorkSheets("abc").Range("A1")
I've only indicated these as text items because I'm not sure what/how you would do this. The end purpose of this is to pass variable Range information from a cell on a WS either into (or use within directly) a VBA Sub. I guess I could pass the WS and Range Address as a single string separated by a "Char" and use Split to separate them and then recombine using Worksheets(Parm(0)).Range(Parm(1)) but it seems like it should be easier than that.
Have a spreadsheet for creating employee schedules (any number of employees, 3 rows per employee, 5 columns for each day). I want to move all employees' info for one day (5 columns and XX rows) to another area and then clear the employees' data for that day. I have the code working for Monday but I don't want to duplicate it 6 more times for Tue -Sun. I have set up named ranges (i.e. MonFT, TueFT, etc.
I would like to call one subprocedure to do this and pass parameters for each day so the ranges can be changed to reflect the desired day?
I am doing this for holidays; i.e. if there is a Wed. holiday, store all of Wednesday's data and clear Wed. Then restore all Wed data when preparing the schedule for the following week.
I have a userform that is called within a sub in module. I declared a public string, "divisonb", in the module. When the userform's ok button is clicked, I define the public string through a "select case" method.
At the end of the private sub for the ok button click I have this:
a message box comes up with the correct string for divisonb. After the sub ends and it returns to the module I have the following:
When this message box pops up, it is blank. Somehow, divisonb was redifined as blank within that 2 lines of code. All my other public strings are returned to the module with their correct values.
I have an Excel 07 spreadsheet containing multiple tabs, modules, and userforms. In Module1, I have a public variable declared as boolean - will call it X. When X is selected from a combo box in Userform 1, X is set to TRUE. However I've noticed that when the user enters Userform 2, X is somehow set to FALSE.
I can't set it back to TRUE at that point because more often than not, it SHOULD be FALSE, thereby sending the macro down a different path. Any idea how I can retain the "TRUE" value for X. I've tried changing the Public Variables to Global, but am still having the problem.
i'm trying to develop an array that is populated when a userform is activated. The userform has a command button that when pressed, will cross check the information filled out in the userform with the entries in the array. If there are no matches then the array is ReDim and the new information is added to the array. Once all the entries have been made. The array is then transposed to a sheet titled "Database". My problem is that vba is not allowing me declare a public array.Below is the first part of the code. Which is when the userform is activated.
Private Sub UserForm_Activate() With Sheets("Resources") cbZIP.List = .Range("A2", .Range("A" & Rows.Count).End(xlUp)).Value cbBED.List = .Range("B2", .Range("B" & Rows.Count).End(xlUp)).Value cbBATH.List = .Range("C2", .Range("C" & Rows.Count).End(xlUp)).Value cbSTABRV.List = .Range("G2", .Range("G" & Rows.Count).End(xlUp)).Value End With
I have a procedure that opens workbooks from a list and then searchs for a phrase given by user. If nothing is found it closes workbook and opens next one. If phrase is found it highlights it on workbook. I wanted to give user some options when phrase is found: to search further in next workbook and to search further, but leaving current workbook open. Here my misery starts.
The only way i made up to perform it was to use Userform and code: userform.ActiveControl.Name. But it seems that Userform called in other workbook than one where the module is, interrupts somehow the procedure. When workbook, where the userform was used, closes the procedure doesn't go on. Evidently Userform is the issue here as without it, macro works.
I have a Userform that has 4 Textboxes (named TextBox1, TextBox2, TextBox3 and Textbox4) and 7 Option Buttons (named OptionButton1, OptionButton2, OptionButton3, OptionButton4, OptionButton5, OptionButton6 and OptionButton7). I need to validate that the following criteria is met:
TextBox1.Value Does not = "" TextBox2.Value Does not = "" TextBox3.Value Does not = "" TextBox4.Value Does not = ""
One Option Button is selected. (It can be any one of them 1-7, Just one needs to be selected).
Is there an easy way to check this data before executing a sub procedure to move the data?? Here is my try at it:
Code: Sub CheckData()
'Is this the correct way to check data ? If TextBox1.Value = "" Then TextBox1.SetFocus MsgBox "Please enter a Batch Date", vbCritical
I have code in a userform that shows another userform with a text box. When the user types text there and presses OK, I want that userform to close (which it does fine), and return back to the original userform (which it does fine), but I want the typed text to be stored in a variable that the code in the original userform can use.
I tried declaring a public variable, "Rresponse1", in each userform's procedure, but that doesn't work. I test for the content of the variable afterward in the original userform and it is empty.
In the original userform I have:
SaveList.Show '(this is the second userform) MsgBox "This is response1: " & Response1 '(to test if the variable is being passed)
In the userform SaveList, in the Private Sub CommandButton1_Click() procedure, I have:
Response1 = SaveList.ListName.Text Application.ScreenUpdating = True MsgBox Response1 '(to test the variable, here it shows the text fine) Unload SaveList
How do I get the Response1 variable to keep its content when control is passed back to the original userform?
I am trying to pass two variables RARD and CARD from Sheet1 'change selection' subroutine to the 'Set ARD Command button click' subroutine. The variable value remain empty and it gives me a 1004 error when I try to execute this line of code:
What I am trying to do is put the text value 'ARD' in the cell on sheet1 which was the original cell I clicked on to open the userform2. To do this I click on the 'Set ARD' button on the userform2 which is then suppose to hide the userform2 and put the 'ARD' text in the selected cell on Sheet1.
I have attached the workbook for review : Therapy Tracker - Tester V2.10 - deleted logo.xlsm
I have two userforms (for simplicity we'll call them UserForm1 and UserForm2). When pulling up data on UserForm1 and selecting CommandButton1 is Unloads the current form and passes the ComboBox1 on the form to a public variable called lSection_Choice. When CommandButton1 on UserForm2 is selected, it uses the public variable lSection_Choice to determine the ListObject on a worksheet and then locate the last row in the first column of the listobject and input the value of the TextBox1 on UserForm2. It runs through without any errors but the worksheets do not update? I am guessing it's because the modal UserForm2 is set and not focused on the worksheet.
Here is the code to pass the public variable
Code: Private Sub AddTeam_Click() lSection_Choice = Me.ComboBox1.Value Unload Me
I have a macro that when it runs presents a form that gives the user an option to skip the calculations or continue. If they click Skip then it continues the 'Next CE' . My problem is I can't get the Boolean value to pass from the form to the macro. Here is what I have
The main macro
Sub Dividend_MF() For Each sh In ActiveWorkbook.Worksheets( Array("G&I", "Growth")) For Each ce In sh. Range("a5:a" & sh.Range("a65536").End(xlUp).Row) If Not IsEmpty(ce) And Not (IsError(ce.Offset(0, 56))) Then If ce.Offset(0, 56) = "X" Then
I am looking at using forms, as in the Userform... Not used them before, but would like to know, if you create a text box on it, is the value global, so any module can use the var? or how can I, so that value entered can be used on the whole book ?
I am trying to bring up a form after clicking the "ok" button on another form. Both forms are defined in my public sub, so basically, the module creates both forms, calls the first form, and hides the second form. Then the first form hides itself and shows the second form. However, when second form is defined using "dim", the first form can't find it to show it, and when I make the second form "public" in my public sub, I get the error that it is an invalid attribute or function.
Here is the code from my sub that applies to this error:
Code: Public Sub PutInEngine() Dim InputForm As New FrmInputs InputForm.Show
Per the attached, I have a set of questions which must be answered by true or false. the answer to all is true. I need a pass/fail indicator on the userform to give a user realtime view based on percentage of true answers. threshold can be assumed as 80% where below it is reflected as fail
I have been trying to use a multi-select listbox as the argument for a subroutine. For some reason, I keep getting a run time error, type mismatch. I'm baffled because when I define the specific listbox, it works fine, but when I attempt to pass the listbox I get an error.
Public Sub OtherDirectTotal(Expense As ComboBox, CostCat As ComboBox, _ Cost As TextBox, Years As Msforms.listbox) Dim IDC As Double Dim IDCt As Double IDC = Val(UserForm2.txtIDC) / 100 If Years.Selected(0) = True Then If Expense = "Sponsored" Then If UserForm2.ChkODC = False Then Select Case CostCat......................
I want to display a string to users. Normally I would do that using message boxes. But that would not give me enough control over the font size, and I want to display using font size 48.
I could have used global variables, but that is not a good coding way. The other way of doing that is using property procedures. I could pass a string variable to a Label control on the form and then could format it.