Paste A Picture In A Cell, From A Sperate Location
I have basically 2 columns on sheet 4
A = Item #, B= Picture
I have a macro the fills in a form on sheet 3, what i want to do is "lookup" or "referance" sheet 4 and paste it in sheet3 based on the item #
At a certain size if I can.. if not ill have sheet 4 match size. I have about 200 pictures.
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Browse For Picture File And Put Location In Cell
I am trying to code where when someone hits the command button it will popup with the browse form and they find the location of the file and it puts there choice in a cell. don't know if it matters but the location would always be a picture. Here is what I have but it shows -1 in the cell HTML Dim strFilePath As Variant strFilePath = Application.FileDialog(msoFileDialogFolderPicker).Show shUserInformation.Range("D12").Value = strFilePath
View Replies!
View Related
Copy A Picture From On Location To Another On The Same HD
First of all, I would like to thank all Excel Forum Moderators and Members especially Andy Pope for the great effort they exert to help all members. Lately, I viewed the thread available on the following link and I admired the great perfect work and codes provided by Andy Pope so much, http://www.excelforum.com/excel-prog...-userform.html My request is similar to the points discussed in the above mentioned thread, but, it is a little bit different .. Instead of inserting the picture to the worksheet, I want the picture to be copied from one folder on the HD to another folder called (Employees photos), which is located in workbook's path. In other words, I need a code to copy one jpg picture from one location to another.
View Replies!
View Related
Paste Data In Outlook As A Picture
I am trying to paste Excel Picture in to Outlook. But couldn't get any Success. I hold down the shift key, and go to the edit menu, Which allow me to 'copy picture'. But when i Paste this Picture in Outlook2003 the Paste Options is grey.
View Replies!
View Related
Interpolation Given A Variable Table Location & Location Of Data Within
I am trying to develop a spreadsheet that will calculate a cost based on a matrix. I am attaching a sample of the calculation created so far. The end result is in cell M13 and is highlighted in yellow. I kind of layed the formula out in a few different cells, so hopefully it would be easy to follow. simplify this process with maybe another formula that I might not be aware of, or maybe show me how to get this done in VB code. I think VB code would be the correct way to go just not sure.
View Replies!
View Related
Use Picture Name From A Cell
I have recorded a macro for inserting, sizing and positioning a product photo into a report. The photo file is in a directory containing many files. Filenames are alpha numeric codes with a .jpg extensions. I wish to be able to enter a different code into a spreadsheet cell which will be named and let the macro insert the proper photo from the files in the subdirectory. Here is the code which was recorded and which brings up the photo for file "HGGA134.jpg ". Range("B10").Select ActiveSheet.Pictures.Insert( _ "C:Documents and SettingsRichard WrightDesktopNUEVOProduct PhotosHGGA134.jpg" _ ).Select Selection.ShapeRange.LockAspectRatio = msoTrue Selection.ShapeRange.Height = 195# Selection.ShapeRange.Width = 180# Selection.ShapeRange.Rotation = 0# End Sub I need a way to change the "HGGA134" part of the code by having it reference a named cell in the report.
View Replies!
View Related
Picture Based On A Value In A Cell
I have found a few solutions here in the message boards but I don't see one that totally matches what I need. Basically I want it to look up the clients logos. We only have a few clients but when sending the report to a client we don't want them to be able to see or find who our other clients are or their logos. So I need it to display a picture based on a value but to also have the pictures on a seperate sheet that I can delete before distributing. A variation of this would work but this stores all the pics on the report sheet and just hides the non active ones. [url]
View Replies!
View Related
Unhide Picture If Cell Contains Value
I have attached a simplified version of the xls I am using. On the attached xls there are two tabs. The first tab (BUYS) has linked pictures of cells on the second tab (Warehousing). I would like some code which would display the pictures only when the corresponding cells in Column F have a number in it. (This number could be anything) e.g. If cell F4 has a number in it show Picture 1 If cells F4 and F5 have a number in them show Picture 1 and 2 My full xls (not attached) has another tab called SELLS. These two tabs (BUYS and SELLS) have 15 pictures each (1 for each row 4:18). Ideally an exception would be written into the code so that if the xls was named "yymmdd Asian Executions" or "yymmdd Europe Executions" none of the pictures would show up. I hope I have been clear but it's very difficult to be objective so please let me know if you need any more information.
View Replies!
View Related
Inserting A Picture Into A Cell
I am looking for a way to insert a picture into a cell BUT the picture should not float. It should change its size whenever the cells size changes - as if it was inserted into a rectangle drawn from the "PAINT" Bar. An example (but it floats) can be seen in the attached picture/
View Replies!
View Related
Finding The Location Of A Cell
i am trying to find the location of the current cell and use the information to print it to screen. For example, if the cell A1 is selected, i need to get the location A1 and use this value for a vlookup. is there a method that returns the current cell location "A1"?? activecell.address
View Replies!
View Related
Changing Picture Aording To Cell Value
I've a sheet with vba code and many pictures the code's function is to display the picture which i write its name in cell (A1). it works well. the problem that the code stop to work after adding number of pictures that makes me conclude that excel has limit number of picture or pictures size or there is aproblem so i hope to find any one who can expaline this form me or solve the problem.
View Replies!
View Related
Add Picture To Cell Comment
i need to have a way to link a small picture/thumbnail to a cell. so that there is a way to preveiw it. Idealy like what happens with the comments where you hover over the cell and the comment would pop up. or failing that mabe a cell linking to the image.
View Replies!
View Related
Copy Picture Dependant On Cell
I am trying to make an Excel sheet with a frontpage sheet and a data sheet. In the data sheet I have several columns with data and then in the end a cloumn with pictures. On the front page sheet I can easily with VLOOKUP formulas transfer the desired data from the data sheet to the front page sheet but I cannot seem to figure out how to copy the picture. When I try to copy the cell with the picture in it, the formula only copies the cell value, which is "0" because the only thing which is in the cell is the picture. how to copy a given picture from one sheet to another based on the information in another cell like a "Vlookup" formula?
View Replies!
View Related
Show Picture Based On Cell
I have folder with 5 photos on c (c:Pictures). Photos are named a, b, c, d, and e. In Excel workbook sheet1 (c:Photos.xls), how to display the photos in cell range (B1:F10) in response to change in cell A1 (i.e., when A1 cell value is “a”, the photo “a” is displayed in the range B1:F10, and so on when the A1 value changes)
View Replies!
View Related
Increment Cell Location Up By One Cell For A Column
Increment all cells located in Column H up by one (the one above it) cell Except for the header cell (since its the header)(H1), H2 will always be a blank due to the make up of my database so that will not cause the header to be re-written. Column H is not an entirely filled column and some cells are empty (if this info was needed in optimizing the code), Im seeking the quickest and easiest way of implementing this since the database is very large.
View Replies!
View Related
Move/Cut Cell To Another Location
I would like to how I can move the words "Total List Price" over to column "C" rather than have it displayed in column "A". If someone can please advise me as to what part of the code I must change in order to have these changes take place Private Sub CommandButton1_Click() Selection.SpecialCells(xlCellTypeFormulas, 16).Select Selection.ClearContents Range("A8").Select Selection. Subtotal GroupBy:=1, Function:=xlSum, TotalList:=Array(6, 9), _ Replace:=False, PageBreaks:=False, SummaryBelowData:=True Application.Goto Reference:="models2" ....................
View Replies!
View Related
Save To Specific Location As Cell Name
I've been searching for ages trying to work out how to do this but have so far only managed to confuse myself. i have office 2007 and I have found some code to convert an excel sheet to PDF, however I need it to saveas the contents of cell (e6) and save to a location on our network drives (C:TEMP).
View Replies!
View Related
Formula To Calculate Cell Location
i'm not sure how to describe this. i've never had to do this before. here is what i'm trying to do. and it's not working. =MIN(B2:B(G2-G3)) basically instead of saying =MIN(B2:Bx)....i want the "x" to be variable based upong the G2-G3 condition. can this be done some other way?
View Replies!
View Related
Store Cell Location In Variable
way to store a cell's location to variables. Something like: int a, b Cell(a, b) = ActiveCell I'm currently working with a fairly large worksheet, and I'm using Cells. Find to look for a specific cell. Then I want to Filter that column, but I can't figure out what column Selection.AutoFilter Field:=? should be.
View Replies!
View Related
Cell Value Based On Mouse Location
Is there a way to have excel track where my mouse is hovering(say if I have it hovering over cell A4) and have it return the value of A4 in a different cell (e.g B7)? This would occur in real time - that is, as my mouse moved over the spreadsheet, B7 would update in real time. Note I would also accept someone selecting the cell - hovering (no select) would be ideal but selecting is OK.
View Replies!
View Related
Copy Cell Values While Id Value Is Same To New Location Then Repeat For New Id Value
what I need to do is , while an id value is constant copy 2 adjacent cells to a new location on the same row as the first occourance of the id value, then if the id is the same on the next row repeat the copy and add these 2 values to the cells next to the ones previously copied. Once the Id value changes then the copy restarts on a new row which is the same as the first occourance as the new id value and repeats the same sequence as described in the first statement. I have attached a sample spreadsheet showing an example of the source and how I would like it to end up, the colour is only there to seperate the outcome from the source and is not required in the code.
View Replies!
View Related
Find MIN Location, Show Cell Next To It
I imagine this is pretty simple but for the life of me I can't figure it out. Here's what I want to do... Find MIN in Column F After finding the MIN in F (let's pretend F222 is the current min) Show the text in the field next to it (in this case display text from E222)
View Replies!
View Related
Creating Variables Based On Cell Location
if Row i Column j is activated then a corresponding variable Aij, Bij, Cij or Dij would be created (if not already existing), or cumulated by 1. The problem as I see it - completely generalised - is to create a variable where the variable name itself is formulaic, as well as its value. I know SAS would have no problem with this due to the order in which it parses data steps, but I'm pretty amateur with other programming languages so I don't know if this is blindingly obvious or downright impossible!
View Replies!
View Related
Add Position Shape To Cell Location
i need to loop through a column of values and get each value Dim LastRow2 As Long Windows("SCFOutput.xlsm").Activate Sheets("Q2SCNeg").Select Columns("A:B").Select ActiveSheet. Range("A65536").End(xlUp).Offset(1, 0).Select LastRow2 = ActiveCell.Row - 1 For Each c In Worksheets("Q2SCNeg").Range("A2:A" & LastRow2).Cells MsgBox ActiveCell.Value Next c i did this but it selects the first blank row (row 15) and gives me an empty message box 14 times (which is right, but i need 14 values) the reason i need the loop is because the number ov values will always change
View Replies!
View Related
Return Active Cell's Location/row
I'm having trouble identifing a way to return a location for the position of the active cell. I've searched Excel help with "Position, location, return, activecell, etc." and I can't seem to figure this out. I know that it's possible, so that's why I'm on here! ... Ok, say the active cell is currently "F1", and I need the location "F1" to identify the ROW to be used in a formula later, how would I go about that? The current contents of cell "F1"' will be "REPLACE", but I need to change the words "REPLACE" in "F1" and other cells labeled "REPLACE" in column F to the following formula (where the "1" in "A1" is is the current row):
View Replies!
View Related
Search Multiple Columns To Provide Cell Location
I have text (eg. 1-* or 10-* or 11-*) being entered in the following columns Q21:Q128 R21:R128 V21:V128 W21:W128 AA21:AA128 AB21:AB128 AF21:AF128 AG21:AG128 AK21:AK128 AL21:AL128 AP21:AP128 AQ21:AQ128 AU21:AU128 AV21:AV128 AZ21:AZ128 BA21:BA128 BE21:BE128 BF21:BF128 BJ21:BJ128 BK21:BK128 I would like Excel to search the above columns provide the cell location (eg. 1-10-*) is located in cell BF26
View Replies!
View Related
Select A Range Based On Active Cell Location?
I'm trying to select a range of cells whereby the range is dependent on the currently active cell. I know you can use the "Activesheet.Range("A1:D2").select" method to select a range where the cells are always the same, but I'm after a dynamic selection where the values can be programmatically altered depending on some other result. For example, let's say that I make a certain cell active (based on the result of some other formula), and I want to select the range of cells in the adjacent column that is X rows deep. Putting this into context, imagine the resultant active cell is B2, I then want to select the range C2:C10, but if the active cell is E10, the range selected would be F10:F18 (if active cell is X, then range would be Y:Z). The Offset function would allow me to position the cell based on the current active one, but it doesn't let me select a range. The Range function only lets you choose either hard coded or index cells, e.g. "Range(cells(y,z), cells(y,z)).select", but this is still no good because I'd need to know the index value of the active cell (can this be done?).
View Replies!
View Related
Circular Reference - Value Of That Variable Changes Depending On The Location Of The Cell
Excel 2003 > Attached is a small model of what I am trying to accomplish. Cells B2 and B4 contain the same formula … a formula that calls a simple function. The function has a variable passed to it … and the value of that variable changes depending on the location of the cell. Now, see the function in Module1 … it is called CellCalc. If the variable passed = Jim then value = 3. If the variable passed = Jack then value = 8. That is straightforward. Note also that when Sheet1 is activated, I calculate the cells from left to right and top to bottom … that is important. Here is the challenge. If B2 > 1 then I want to add B2 to B4 and set B2 to 1. I can set B4 properly but I cannot reset B2. You can see my 2 attempts that are commented out. Is there some way of accomplishing this … or am I simply stuck in a circular reference? The alternative to this is to write a function that operates externally on these cells. That will work for sure but then the values of the calculations will overwrite the functions in those cells, thereby taking away the dynamic nature of this application.
View Replies!
View Related
Flashing Cell & Picture Load Additional Code
At the moment I have two macros. One loads up a background picture into my work sheet when I start it up, the other two are called ‘StartBlinking’ and ‘StopBlinking’. This is the macro code I have to load up the picture: Sheets("CASHFLOW + FUNDSFLOW").SetBackgroundPicture Filename:= _ "G:EH_Background.JPG" What I hope to achieve is: 1. Get the picture to ONLY load up if it actually exists on the G: drive, otherwise do nothing. 2. If value 1 to 13 is input in Cell C3, run the macro StopBlinking. 3. If Cell C3 is left blank again, run the macro StartBlinking.
View Replies!
View Related
Macro To Change Linked Picture (Camera) Cell Reference
I am a complete newbie with the camera tool. Is there any way to make the camera tool dynamic so that the cells the tool is referencing can change upon the click of a button or some other form of switch? I am creating my first dashboard and this is the last step for my report to be completely dynamic. ----------------------------------------------------------------------- Never mind, I apologize i just figured this one out... Create a user defined formulaIn the UDF Create an if statementThe if statement's condition is the logistics in the shift mechanismThe value if true is the first group of cells you want in the snap shotThe value if false is the second group of cells you want in the snap shot, The range you want to toggle betweenRename the cell reference of any snap shot you have taken with the UDF name. In my example my UDF is "Dude" so when you select the camera tool it shows =Dude as the cell referenceReference a scroll bar to the conditional cell you selected in the if statement or choose statement. This is the shift mechanism If you want to toggle between more than 2 sets of data use =Choose instead of =if
View Replies!
View Related
Current Cell Location In A Cell
I need a function(s) that can indicate the current cell column and row in two different cells. e.g. Let's say in Cell A1 should indicate the column of current selected cell and B1 indicates the row of current selected cell. A1 would read - 7 and B1 would read X if the current cell is at X7. I do not know VBA. If you give VBA solution, please give me link on how to activate the codes.
View Replies!
View Related
Insert Picture & Auto Size To Active Cell Dimmensions
What I am trying to do is to give the user the ability to insert a photo and have it autosize into a range of cells--so far I can only get it to work with a single cell and a predefined file. Can this be refined so that rng references a group of cells and pic somehow lets the user input a file name or pick its name and location? Sub test() On Error Resume Next Set pic = ActiveSheet.Pictures.Insert("C: ange.gif") On Error Goto 0 If Not pic Is Nothing Then 'Found it!' Set rng = ActiveCell With pic .Height = rng.Height .Width = rng.Width .Left = rng.Left .Top = rng.Top End With End If End Sub
View Replies!
View Related
Reference Cell Based On Button Location & Determine Button Used
I received this code from an example I found once upon a time that was originally submitted by someone else. Right now the code enters the current date in a cell of the same row as the checkbox when it's checked. I need to revise it, or come up with something similar, that will reference the value of a cell when it is in the same row as the button (from the Forms toolbar) that is clicked to activate the macro. First of all, I don't know how to reference a Forms button in VBA. Sub Process_CheckBox() Dim cBox As CheckBox Dim LRow As Integer Dim LRange As String LName = Application.Caller Set cBox = ActiveSheet.CheckBoxes(LName) ' Find row that checkbox resides in LRow = cBox.TopLeftCell.Row LRange = "B" & CStr(LRow) 'Change date in column B, if checkbox is checked If cBox.Value > 0 Then ActiveSheet.Range(LRange).Value = Date 'Clear date in column B, if checkbox is unchecked Else ActiveSheet.Range(LRange).Value = Null End If End Sub Here is some other code I already created. Unfortunately, because I don't know how to do the row reference, I had to create 25 different macros, which just bulks up the size of my file and slows it down. But here is what I'm trying to accomplish in my macro:.............
View Replies!
View Related
Function To Mirroring Cell Relative To Function's Location
I have created a List in excel of various tasks. (See attached example.) Each row contains one cell with a function which equals the cell above it and to the right. So the function for cell C3 would be D2. The only importance is that the cell mirrored is always the cell one above and to the right. However, now I would like to be able to rearrange this List, but the “one up and to the right” function will now be all over the place. Is someone aware of a function which will target a relative location instead of an exact cell?
View Replies!
View Related
|
TRACKER
