I would appreciate some ones help to correct a macro I'm trying to write. The macro copies 3 columns from Sheet1 to Sheet2 in a selected location. The 3rd column copied needs to be pasted in a different column in Sheet2.
This Macro is supposed to get certain totals for me from diffrent pages. Instead of selecting an entire row I want to select specific cells, so when it finds the word total on the sheet, whose location can change often it will return the value two cells away.
My problem is as such; each month I receive an application for payment. This will contain around 20-30 worksheets. However I only need to interrogate around 3-4 specific ones. The worksheets I require contain data describing the plant/equipment a company has purchased, or materials purchased over a period of time. Each month the worksheets are updated with the previous months data appended to the bottom. I am required to established if the equipments have been purchased at the correct rate.
The worksheets are all protected thus in order to interrogate them I am required to copy an paste their contents into a new work book in order to format them and insert my new "assessment" columns. I need to keep the work sheets separate in the new work book as they have different layouts however they have the same layout and work sheet names each month.
I needs a macro which would allow me to open up a new book them copy the specific worksheets from a specific file into the new work book. I then have a separate macro which re-formats them into the layout I require.
Essentially I need to copy the first 8 cells in a row in one sheet (for example: A3:I3) when the word "Actuals" is entered into A3 from a drop down list. Then the copied data needs to be pasted to a another existing worksheet in the same workbook in the next available row. The data includes mostly values, but there is a formula in column H that creates a hyperlink out of the content in column G, friendly name in column I.
I am not stuck on the idea of having "Actuals" entered in column A as the trigger or change event and there will be times when a new copy/paste of the same data will need to be done more than once at a later date.
For further information, column B contains a serial number/productID number.
There's one sheet that has a list of customers (this is updated very frequently). These customers are either ‘New’ or ‘Existing (as listed in a corresponding column) - would it be possible to have a macro that, when run, will place a copy of existing customers into a second worksheet (“view list – new”), and a copy of new customers into a third worksheet (“view list – existing”), with the main worksheet still listing both existing and new customers.
As the main sheet that lists all customers is updated very frequently (with customers being added and removed throughout the day), would it be possible to clear all contents of the other two sheets that each list of 'existing' and 'new' customers will be copied into, before the two lists are copied into each of the two sheets (just to ensure there isn’t any data in there from the previous time each list was copied in).
I’ve given this a go via the ‘record macro’ function - some users of this WB use excel 2000, and others use excel 2007, but it only seems to work on excel 2007 (which is what it was recorded on)…
I have a current macro that saves each sheet as their own file. The first 10-15 sheets are not really necessary, so I typically delete them once the macro has run. I am looking to add two things to my current code:
1. Add a tab called Start. Make the macro look for 'Start' tab and then just save each sheet to the right of that as its own file.
2. Save each sheet in the macro as just a copy/paste value. They current have a lot of links and it makes each file close to 3MB. That makes it incredibily difficult to paste all in one email.
Here is the current code:
Sub CreateWorkbooks() 'Creates an individual workbook for each worksheet in the active workbook. Dim wbDest As Workbook Dim wbSource As Workbook Dim sht As Object Dim strSavePath As String On Error GoTo ErrorHandler
I have about 10 rows of data that have columns of information describing computer hardware and pricing. There are 10 rows, because each row represents a different country and different tax rates and pricing changes per country. So each column of a row has a specific formula to calculate information for that row's country information. All these 10 rows of formulas are kept as a reference at the bottom of the sheet.
At the top of the sheet I need to have a drop down menu to choose a country and then it will automatically copy and paste the row of that country to the current row at the top.
Is there any easy copy/paste macro for such a thing?
I'm trying to get my code to work by trying to copy from a visible tab into a hidden tab. Currently I have it able to function when the tabs are hidden, and i've been trying to get it to work.
My code is below. I have a variable section because there are different sheets that will be hidden, and this is a way that i found works to get the variable tabs selected.
the above information have following header ie. Location, P.O.Box, Address, Tel, Fax and Category.
every time one of the header inforamtion is missing ie. Address or P.O.Box, Or Fax, due to this problem every time cell address of information aganist header is change. supose in first copy/paste Tel inforamtion is in A15, but second time it may be on A13, and 3rd time it may be on A17 and so on.
I want to make a macro which search header ("Location", "P.O.Box", "Address", "Tel", "Fax", "Category" ) from a Range A1:A30. than down two steps to copy header information (75325412) and paste in fixed cell location C1:C5 (C1=Name, C2=Location, C3: P.O.Box, C4=Address, C5=Tel, C6=Fax, C7=Category) in same sheet. and repeat the steps to copy information aganist header from all header in Range A1:A30.
I have rather large Excel file that spans around 245 columns & has multiple users responsible for certain columns. Columns are chunked to provide data about a specific group. Every 72 hours, I need to provide to managers what’s currently on this file in a specific summary format.
I’ve recorded a macro that gets me half way there. Here’s where I’m clueless. After my macro deletes unnecessary columns, what remains are the columns for “Main Data” group + each of the 5 “Business” groups (Investors, Lawyers, Credit, Finance, and Support) which would have identical column headings.
(1) Name (2) Address (3) ID# (4) Control#
Furthermore, for each of the 5 “Business” groups, there are 9 slots (ie- a user can enter up to 9 unique entries for a particular group.)
Example- The Investor group contains 9 slots. Each slot will contain the 4 columns mentioned above. So there are 46 slots in total – 1 for Main Data, 45 (5 groups x 9 slots) for Business groups.
MY PROBLEM: I need a macro to now cut & paste all data from each of the 45 Business groups slots & then paste at the bottom of the MAIN DATA slot.
The final file would be 4 columns (as listed above) wide. Data from each of the 45 business group slots would be one below the other- all of it underneath the data in the Main Data group.
I attempted to record a macro where I’m copying a section’s data range starting from row2 to row4000 (I know there will never be 4000 entries. I did this just to ensure that all future data would be captured) then pasting that after the last entry in the Main Data.
Example- I’d copy data from Investor1 slot(starting at column E2-H2) & go about 4000 rows down. Then I’d press CTRL+Down Arrow key in column A & then click the down arrow one time to take me into 1st empty cell where I would paste my copied data. I was going to repeat this process for the remaining 44 slots.
I’ve added some extra entries to test the macro & the problem is that the recorded macro is pasting data in specific cell location in column A instead for looking for the 1st empty cell in column A & then pasting the copied data.
So far I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work. Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A. I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work.
Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A.
Sub transposedata() Sheets("ConsolidatedYTDReport").Select Range("E2:H4202").Select Selection.Copy XXXXXXXXXXXX ActiveSheet.Paste End Sub
I am having a problem with hidden columns when creating a new sheet via VBA.
The source sheet has (4) columns that are hidden when this data is pasted to the destination sheet it ignores the four columns.
I need the destination sheet to be identical to the source sheet with the hidden columns.
As you can see in the code I have been able to hide the columns however the data is now in the wrong columns because the copied data excluded these columns. I tried hiding the columns before and after the paste with no success I'm thinking the issue lies in the actual copy portion of this task.
Code:
Sub E_MAIL() ' ' E_MAIL Macro ' ' Multiple_emails_and_Sheets Macro 'This is used for one sheet with multiple e-mails. ' ThisWorkbook.Sheets("NO").Copy
Have a slightly unique issue that I can't seem to find the specific solution for. I am wanting to filter a range, using row 1, then copy the visible cells (Excluding the title row 1) and paste into the same location, so over the data as Values.
I can do the filtering part and the selection of the visible row. Only trouble is pasting it to the same location.
this is the code so far - anything better would be great
Sub Macro2() Sheets("GF_Scoring Database").Activate Dim extvalue As String Dim rng As Range
I have searched all over and read many solutions for selecting only visible cells and copy pasting them or formatting them by doing Ctrl + G and selecting visible cells only. However the problem is once I select visible cells only, it seems that every time I do Ctrl + C on filtered Range it only selects visible cells. I want a way to toggle this setting in Excel. I'm using Office 2007. For example: if I want to select the entire range, both hidden and visible cells within the selected table array, is there anyway to reverse or toggle the setting that causes Excel to refresh the "visible cells only" setting back to default or all cells?
It would be a much faster way than to remove all filters, select & copy entire range, and then re-apply all filters again.
I have a macro that allows me to copy the value of a dedicated cell (I4) and paste it at the start of a range (N4:S4) via a Form Button. When the cell (I4) value changes, I can run the Macro again and it will enter the new value in the next cell along in the range.
This works well across one row. What I would like to do is use this arrangement on more rows. The ranges would be directly underneath eachother.
Is there an easy way of doing it? Or will I have to write out a new Macro for every row?
I have a macro that copies and pastes into another sheet. When I add a row of data into my spreadsheet I want the macro to be able to change the range size and copy and paste the add row with the prior data.
I am trying to write a very basic macro to copy and paste, but when I record the keystrokes, step 4 (see below) seems to be recording absolute cells and not relative (?). At any rate, I can't seem to figure out how to get it to select the text the way I want it to. These are the keystrokes I want:
1. Ctrl-c in the current cell <copy the current cell>
2. DownArrow <move down one cell>
3. Shift(hold)-End-Down <select the blank spaces from here down until the next occupied cell>
4. Shift(hold)-Up <move the selection up one from the bottom to exclude the occupied cell>
5. Ctrl-v <paste>
6. End-Down <move down to the last occupied cell>
I have set the record tool to record "relative" references.
Below is the code that was recorded. It's line 5 that's not working - how do I fix it? What is the command to tell the program to press the shift key and an up arrow?? Such a simple thing, and yet I can't find the answer anywhere! Things sure have gotten complicated since the old Lotus 1-2-3 macro language...
Sub Fill() Selection.Copy ActiveCell.Offset(1, 0).Range("A1").Select Range(Selection, Selection.End(xlDown)).Select ActiveCell.Range("A1:A17").Select ActiveSheet.Paste Selection.End(xlDown).Select End Sub
I would appreciate if someone can help me figure out a macro that will copy range (A3:T112) from "Step 1" sheet to next available row in "Step 2" sheet.
I have a macro that takes info/data from multiple sheets in the Basin workbook and summarizes it into the Median Database workbook. I need to copy the values in range B5:EM5 in every sheet (each sheet name is site #) in the Basin workbook and paste that range into the median database workbook row with the corresponding site.
Here is what I have so far
VB: Sub Median_Database() 'This Macro takes the median from each station tab in the current Basin workbook 'And inserts it into the Median Database workbook
[Code]....
how to grab the sheet name and insert it in the median database. The problem is the copy/paste of the range in each sheet. The macro locks up every time.
I have data in E6-E67 on Sheet 1. Based on the date in A2 on that sheet, I need to paste to a column in Sheet 2. In excel, I am able to get the cell location through vlookup and get the correct column number/cell reference. When it gets to the paste location, I am stumped on how to format that line of code? Do I need sometime of variable? I tried to use the address/lookup code but it does not work.
copy range of data from "sheet1" to sheets named A-Z i.e A,B,C,D,E..... in the same location as it was on sheet1 e.g. if on sheet1 data was in B1:C10. i want to copy this onto the sheets named from A to Z in the lacation.
I'm trying to write a set of macros and one of the macros needs to move a folder with subfolders from P:CJ to P:WO
Now I've been using the CopyFile State. Is there something similar because in my search they talk about using FileSystemObjects and I have now clue how to use those.
