I've been updating charts from different workbooks to a destination workbook manually & it's getting a little too much recently. Need to writing a macro which prompts for the source & destination workbooks and to copy charts from source to destination workbooks?
View 5 RepliesI am trying to rebuilt a chartsheet without using copy/paste. I have chartsheets with 2 or more charts on it. I add a new chartsheet, then add a new chartobject and then I want to copy the same series ( name, xyvalues, values). Unfortunately it doesn't work.
Sub ReplicateCharts()
Dim Cht As Chart
Dim NewCht As Chart
Dim ChtObj, NewChtobj As ChartObject
Dim SrSerie As Series
Dim ns As Series
Dim x As Variant
If ActiveWorkbook.Charts.Count > 0 Then
For Each Cht In .Charts
Set NewCht = .Charts.Add()
NewCht.PageSetup.Orientation = Cht.PageSetup.Orientation
For Each ChtObj In Cht.ChartObjects...........................
I’m simply trying to copy all the data on one sheet, open up a new excel application:
Set objExcel = CreateObject("Excel.Application")
objExcel.Workbooks.Add
and then paste all the information to the new workbook. When I try, the charts don’t paste, only the values and formats.
I have this workbook of an AR summary.
I would like Charts in there that pull from 'Sheet 1' and what i am trying to achieve is the chart always shows the most current data, as the data is entered weekly. Is it possible to have the graph constantly showing the data that is the most current?
The X & Y are
Total AR
10/22/06 10/29/06 ect.. 13 weeks of most recent data.
There are about 15 different graphs, and it is time consuming to have to go into each one of them and update all the series.
We have a worksheet, which contains charts and data which requires updating by different department.
However, when I have this work- book as a Shared workbook (Tools - share workbook), The charting and macro has all been deactivated.
Would anyone have any idea on how do I share a workbook - while being able to also update the Excel Charts within it ?
(Different user will be updating different charts, and there will be no conflict in between them)
I'm trying to go through a workbook and, based on some user inputs, hide certain sheets and charts (these charts are their own tab, i.e. a chart object). Here's a sample code I wrote for a dummy workbook I have. Unfortunately it doesn't work, I think because the loops are nested. However if I can figure out how to fix this code I can easily adapt it to my other real problem.
View 2 Replies View RelatedIm looking for a way to check all charts in a workbook, and resize them.
There are two charts per tab, and i would like the first one to sit on cell A1, and the second to start from a25.
So each chart about 25 rows, by 15 columns if possible.
I will attempt to describe my problem the best I can. Thank you in advance:
I have a series of charts (and the tables in which the data for the charts is stored) located in a worksheet. I copied and pasted each one of these charts next to its original. I then moved each one of the new, pasted charts into a single chart sheet at the end of the workbook. Is there a way, via macro or otherwise, to update the charts now located in chart sheet if any changes are made to the original charts?
I have a workbook that has 52 weeks representing all the weeks in the year for a trainning plan. I plug in various stats like heart rate, energy expended, power, time, ect. Then, some other fitness markers are calculated from these values. So i want to take the data from each week (each sheet) and plot it in a chart on another sheet dedicated to just charts. I'm not really sure if i should reference the different cells into the sheet then make a chart from those, or can i grab the data from the same cells in all 52 sheets at once?
View 9 Replies View RelatedI have a Reporting workbook I designed. There is a "Parent" workbook with the following design.
It has 6 Pivot Tables on a Sheet called "Data"
It has 6 Pivot Charts that were created from these tables on a page called "Summary"
These 6 Pivot Charts are all linked through a pair of slicers.
There is a "control" page which has instructions and buttons that trigger "Refresh All" and "Create Child Workbok".
This design is so that someone unfamiliar with excel could conceivably create the final product.
Essentially I have written/put together VBA to Create a new workbook "child" which has should be a funcitoning copy of the "parent".
The problem is the copiedmoved (I have tried both) Pivot Charts no longer update/refresh when the pivot tables change. I have script that reconnects the Pivot Tables to the Slicers. Slicers are fully funcitonal. Links in cells are fully functional.
Some of this code might look familiar.
Code:
Sub createWB()
' Copies VBA modules, Calls
Dim wbNew As Workbook, wbT As Workbook
Set wbT = ActiveWorkbook
On Error Resume Next
Kill ("PATHmod1.bas")
Kill ("PATHmod2.bas")
[code].....
This macro works fine on my machine but not with other users:
This should copy/paste certain cells then paste 3 sheets into a new work book.
ON other computers it seems to paste in a picture? works OK for me?
Sub ValidationTests()
'
' ValidationTests Macro
' Macro recorded 21/12/2011 by '
'
Sheets("Score Sheet").Select
Range("A8:M18").Select
Range("H18").Activate
Selection.Copy
[Code] ..........
Consider two instances of Excel - one with a workbook containing a chart and some VBA code, the other containing a blank workbook. When I paste a chart from the first instance of Excel to the other, all the VBA code from the original workbook is also pasted into a new third hidden workbook in the second instance of Excel! If that weren't weird enough ON WINDOWS XP (but not Windows 2000) if the VBA code included WorkbookOpen or AutoOpen this code is executed in the second instance of Excel, which of course fails if it references sheets that only existed in the workbook open in the first instance of Excel! This is the first time I've seen the same version of Excel do different things on different versions of Windows! Example attached - What's going on!? Auto Merged Post Until 24 Hrs Passes;...note: this does not happen when pasting charts between workbooks open in the SAME instance of Excel
View 6 Replies View RelatedCopy data from workbook, open existing workbook, select range and paste. But my copied data is lost.
Sub Select_Copy_Paste()
'
'
Windows("ElektroFunctiesDatabase.xlsm").Activate
Sheets("PowerSupply's").Select
Range("A2:I6").Select
Selection.Copy
[Code] .........
' Here i need to do something to paste data into r.address?
My DB is in table format . I use this table as source data for 2 barcharts and 1 pie chart.Following are my table headers
Costs|exp heads|Month1|Month2|...|Month n|Spark lines|Average
When i add a month coloumn,Sparklines and Average coloumn should get updated automaticaly.Now this is not happening even if the data is in table format.I also want the graphs to be automaticaly updated.
I've been doing various searches for past few hours and can't seem to find out if one its even possible, the closet I've found on here is to copy row to another workbook.
My question is I have one excel book called level1.xls and another excel book level2.xls, now in level1.xls I have a row of fields filled in and in level2.xls I have a blank form which for example I would like to try programme in VBA from the level2.xls file to click a button and open automatically level1.xls then grab field "A2" value from level1.xls and place it in level2.xls field "L4" then continue using level1.xls "B2" to level2.xls in field "C3" and then continue down when I add more values A3, A4 so on in level1.xls to the same field in level2.xls L4.
Steve.
How can i copy paste a set of data from a workbook to another workbook. for example i will copy cell D10:I10 of workbook1 to cell B2:F2 of workbook2.
I am trying to put some charts into a report that is pivot table based. I have some code that will work if the pivot tables stay stagnic but the users may change the tables around so that could be an issue of new data. I have the following code where I changed the source to the pivot table name (general name because of numberous report possibilites). I have taken out the other charts because they are just a variation of the chart 1. I am crashing on the line with the * on it.
Sub UWTierChart()
Dim oCell As Range
Dim oChart As Chart
Set ws_data = ActiveSheet
'Chart 1
Sheets(wsPT).Select
Range("B21").Select
[code]....
I have created a spreadsheet some time ago and have been asked to improve on it but I'm rusty with VBA.
I have an automated ordering system that saves each sent order as the date e.g "05-04-2013.xls" but the management team want a graph with the data for the last 4 weeks compared. I have created a seperate workbook called "consumables report.xls" which has a column with the products listed followed by columns "Quantity" and "cost" which is repeated for the 4 weeks of the month.
I want to add a button to prompt the user to choose the saved order e.g "05-04-2013.xls" (all orders saved in same directory) to copy and paste the quantity and cost columns (c8,D69) into "consumables report.xls". I got this to work earlier but it would only paste the formulas and not the values. So I need
A prompt to open workbook
Copy range (c8,d69)
Close work sheet
Paste special .value (c8,D69)
I dont care if it has to open the workbook to copy the data as this will only be used once a month so it dosnt matter how slow the code is.
week 1 week 2 week 3 week 4
Product
quantity
cost
quantity
cost
cost
quantity
cost
1
2
3
4
5
6
7
8
I've created a chart in sheet 1 in a workbook. I want to copy and paste that chart into another sheet (lets take sheet 2) of the same workbook. I am using Excel 2010 version.
Whenever, I try to copy a graph and want to do "Paste Special as Link picture". The problem I am facing as "Paste Link" option is inactive.
I am attaching the Excel for your reference.
I have to gather a LOT of information from different files, into 1. To do so I want to automate this.
1. I will make a new, target file
2. I want to have a file with the macro in it
3. i want to open a (various) number of files to copy the info from
Now for my questions:
* How can I determine which other files are open (apart from the new and macro file)?
* How can I access each individual file, copy the information, paste it in the target file and close the "copy-file" after this
* Within the previous *): how can I determine how many worksheets there are in each file and do the copying sheets by sheet?
I need to paste a worksheet into a different workbook. Can I paste it over a different sheet? For instance, I want to take a sheet and paste it as "Old Data" (sheet name) into a different workbook. The code I am trying is:
View 2 Replies View Relatedit was possible to disable pasting in an Excel workbook. He didn't want Copy disabled, as he needed to paste data out of this tool into other workbooks, but just wanted Paste and Paste Special disabled while viewing this particular workbook.
Public Sub TogglePaste(booPaste As Boolean)
Dim cmb As CommandBar, cbc As CommandBarControl, cbp As CommandBarPopup
Dim cbpEdit As CommandBarPopup, cbcPaste As CommandBarControl
Set cmb = Application.CommandBars(1)
For Each cbp In cmb.Controls
If cbp.ID = 30003 Then Set cbpEdit = cbp
Next cbp
For Each cbc In cbpEdit.Controls
If cbc.ID = 22 Or cbc.ID = 755 Then
Set cbcPaste = cbc
cbcPaste.Enabled = booPaste
End If............................
I am trying to come up with some VBA to paste special value an entire workbook.
View 9 Replies View RelatedNeed code that would copy range "A1:J1" to another workbook in the next available blank row.
Im trying to copy from one notebook to another and paste but to not paste over the information thats already there. I need to just paste my new info below whats already there. I have attempted this by filtering when I copy but its not working. My attempt is below. Right now Im filtering by column a but i need to be filtering by column c in the future.
ertyMerge()
ActiveSheet.Select
Range("a2:t65000").Select
Selection.Copy
Windows("Disc Pivots Template.xls").Activate
Sheets("Sheet1").Activate
Range("a1").Select
ActiveSheet.Paste
Sheets("Sheet1").Activate
Range("a1:t65000").Select
Selection.Copy.........................
i'm trying to copy a selection from one workbork to another workbook but i have an error when attemting the paste bit.
here's what i've got: ...
For example i have workbook1,2&3, i want to copy the sheet(grade2&3) in workbook2&3 and paste to workbook1. But the data in workbook2&3 sheet(grade2&3) will automatically paste in workbook1 sheet(record grade 1 - grade 3) in column grade 2..
View 6 Replies View RelatedNormally when a code copies a cell value from Workbook-A, closes Workbook-A and then pastes the value into Workbook-B it works flawlessly. However, i noticed that this doesn't work in all case, for example when a code repeats itself with the "For - Next" function then when the code copies from one workbook to the other it causes an error.
Here is my code and i made the part of the code that is red is where the issue lies.
[Code] .....
Here is the file rCell.xlsm, in order for the code to execute you need to select the green cell. When you hit the macro a copy of the workbook is placed on your desktop. The code then tries to copy a range from the copied workbook and paste it in the original macro workbook. The pasting part is crashing. In the code i marked the issue in red.
View 1 Replies View RelatedI am coping form "SAC May'14 workfile" sheets "Top 20 FM" & "FM Major Inc&Dec" to "SAC Register Analysi Template" sheet "Top 20 FM" work perfectly but if i copy from e.g "SAC Feb'14 workfile, March'14 workfile" etc..
I have attached the file for ease of reference.