I’m simply trying to copy all the data on one sheet, open up a new excel application:
Set objExcel = CreateObject("Excel.Application")
objExcel.Workbooks.Add
and then paste all the information to the new workbook. When I try, the charts don’t paste, only the values and formats.
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
I am trying to rebuilt a chartsheet without using copy/paste. I have chartsheets with 2 or more charts on it. I add a new chartsheet, then add a new chartobject and then I want to copy the same series ( name, xyvalues, values). Unfortunately it doesn't work.
Sub ReplicateCharts()
Dim Cht As Chart
Dim NewCht As Chart
Dim ChtObj, NewChtobj As ChartObject
Dim SrSerie As Series
Dim ns As Series
Dim x As Variant
If ActiveWorkbook.Charts.Count > 0 Then
For Each Cht In .Charts
Set NewCht = .Charts.Add()
NewCht.PageSetup.Orientation = Cht.PageSetup.Orientation
For Each ChtObj In Cht.ChartObjects...........................
I have a simple excel sheet with columns A (name1) B (name2) C (name3) D (name4) E (name5) F (text). A given name can only appear once in any given row.
I am looking for a vba code (Excel 2003) that would loop through cells in A1:E?? (number of rows varies, loop needs to find last non-empty row in column A) and look for a particular name (e.g. "Stefan Thomas"):
1) create new unnamed word doc
2) Put "New Annex" as a header (top right) in the new word doc
3) Insert text "List for Stefan Thomas" centered and underlined as the first line of the new word doc. The document will have two sections:
4) Insert text "Items in Column A" bolded and aligned to the left
5) Insert text "Items in Column B to E" bolded and aligned to the left below the section in 4
6) if "Stefan Thomas" is in column A, copy text in column F and paste in word doc as first bullet (below title "Items in Column A")
7) repeat step 6 for all other instances of "Stefan Thomas" in column A (append text as next bullet in section "Items in Column A")
8) If "Stefan Thomas" is in column B or C or D or E (can only appear once per row), copy text in column F and paste in word doc as first bullet (below title "Items in Column B to E")
9) repeat step 8 for all other instances of "Stefan Thomas" in column B or C or D or E (append text as next bullet in section "Items in Column B to E")
if you could indicate in the code how I can choose the type of bullet as well as space between bullets and font type
I have on sheet "Charts" in cell "B20" a "date from" and in cell "C20" a "date to" (these will be input manually).
What I need is to check Column "F" on sheet "Report" for any cells within those dates, I then want to copy the entire row(s) that contain these dates and paste them into sheet "Weekly" starting at cell "A2".
Using excel 2010
I am using code to filter my 4 sheets Greater then 0 (zero)
After apply above filter now i need to copy multiple rows and paste on another specific workbook for paste i m using below code:
for 1st sheet with the name ("V2")
for 2nd sheet with the name("LV")
For 3rd sheet with the name ("F2")
and 4th sheet with the name("L2")
If I play above code one by one all is going very well,,,,,,or if use in this way all is going very well
But here is a big problem..........if any sheet have no value greater then 0(zero)....then code paste all data... e.g shssts("LV") .Range("C5:C54").Copy but C5:C54 have no data greater then 0(zero) and it will paste on another sheet c5:c54 and again new sheets data will paste below the c54 while c5:c54 have no data.
So I want if any sheet have no data with range is greater then 0(Zero) then skip the copy paste code or use like SpecialCells(xlCellTypeVisible) .
I have data in some of the cells within range A26:A39
These cells are populated via an IF function on another worksheet. Even though the cells appear blank (as in the value returned is ""), there is a formula in these cells. I think it's called formula blank?
I am looking for a way to copy the data from the cells within the range which are not blank (ie: not = "") and paste this data elsewhere on the sheet in a list with no blank spaces in between.
I anticipate that there will be 4 non blank cells within this range.
Ideally I would have data from the nonblank cells copied and pasted to cells
A40
A41
A42
A43
I need to find the last instance of "IO" in column E and copy cells in columns B to E for the row below to another tab called "OP" cell O9.
I need the VBA code for Excel 2003.
I just copied a table from the web which contains numbers in the last column.
I pasted the data into Excel, but when I try to run any type of calculation i receive a #VALUE! error.
The annoying 'workaround' is to re-type the same numerical text into it's own cell, which allows for calculation.
I've tried changing the cell formatting to 'general', and 'text', but I still receive the #VALUE! error, when trying to calculate.
Copy and paste the data from different excel sheets to one main sheet.
I will get a file which may contain 10 sheets or 15 sheets depends on data and rows also not sure it varies from sheet to sheet. Now, I would like to consolidate all the sheet data except first row (heading) for first instance I need heading and second sheet onwards not required the headings hence, macro should copy from second row onwards.
The data should get paste one by one if first sheet contains rows till A100 then in main sheet for second sheet data paste should happen from A101.
I am trying to copy and paste values from one column to another on the same sheet
E.g Column A
A1-Red
A2-Blue
A3-Green
A4-Red
If i filter to red and copy cells A1 and A4 and paste into column B, instead of pasting it into cells B1 and B4 it pastes it into B1 and B2...
How do i get it to paste on the same row?
My sheet im working with has thousands of rows, some need to be pasted, others need to be left as they are
I want to prevent copying and pasting over cells with data validation as this means the validation is overwritten. To get around this I've selected all the cells with data validation and unlocked them, then protected the worksheet with all boxes ticked apart from format cells, columns and rows.
This prevents copy/pasting from overwriting data validation but it doesn't prevent data being pasted in that doesn't meet the validation criteria.
So for example, say -1 is in cell A1, with no data validation. In B1 there is data validation, which doesn't allow negative numbers to be entered. If I copy and paste A1 into B1, the data validation isn't overwritten, but it doesn't stop the non validated data (-1) from being entered! If I then double click on B1 and press enter it recognises the validation criteria is not met.
I have a chart and a data table (please see attached file named "delete_1.xls).
I need to present these 2 items in a single slide of PowerPoint.
I have done like this.
-First copied the chart from Excel.
-Then pasted it in PowerPoint using "Paste special".
-Then clicked "picture (windows metafile)" this is to reduce memory consumption
Then repeated the above steps for the excel table too.
The PowerPoint slide that I got cannot be attached as system doesn't allow me.
Question: I wanted to a give a paper copy of the PowerPoint slide to my Director who needs a PowerPoint slide and not an Excel chart. But in the slide, the numbers of the table look much juggled and as if the numbers are too closely typed.
I tried with various different fonts in Excel and then copy and pasted in PowerPoint but the problem persists.
What things I should do in Excel table so that cell values are clear in the Table presented in PowerPoint ?
Attached File : Delete_1.xls‎
I would like to have a macro, to copy the cells and paste it 6 times in a column. below are the format required.
Column A
Input
abc
ert
uty
Column B
Output
abc
ert
uty
abc
ert
uty
[Code] ......
I have a range of cells with data from one day. This range is "C36:K63"
Each day, the prior day's range needs to be copied and pasted into a new range that begins two rows below where the prior day's range ends.
Thus, day two should copy "C36:K63" into a new range: "C65:K92"
As you can tell, the rows will change each day, but the columns will always remain the same.
How can I create a macro that allows a user to copy data from the most recent range and paste it into a new range?
i.e. if there is no data in C65:K92, the macro should copy the data from C36:K63 and paste it into C65:K92. Then, the next day, the macro would copy the data from C65:K92 and paste into C94:K121.
Need a code using application.inputbox to get a range, then use that range to copy and paste the range's link and format to a different sheet? The specifics don't matter, I just can't figure out the syntax. Here is what I have currently:
View 2 Replies View RelatedThe sheet I have attached has three tabs one is a master sheet another is the production input and the last is an engineering input section, I have coded the production input section to input into cells and email the engineers when they have a new job, the issue i have is with the engineering input.
The engineers can currently go into this sheet and input the job number onto the engineering input section and it will show them the current issue from the master sheet (I have already entered 1002 in it), what I want them to be able to do is input into the white sections below the description and when they click on update entry a macro takes the job number entered into B3 and saves the information onto the mastersheet in the correct column/row which corresponds to the job they are updating.
However the engineers may need to go into the same job several times and update different information therefore the fields need to not paste into the cells if the input sections are blank.
Masterfile.xlsm
I'm trying to paste data from a website. It's in the format:
abcd abc abcd abc
abc abcdef abc abc
The data is separated by SPACES. There is a different number of spaces between the data on each line (not sure if that matters)
When I paste it into excel, each line comes through as one cell. Is there a way to tell excel to recognize the spaces as new cells?
Figured it out. Data --> Text to columns
I have an excel which creates PPT from the excel. but the graph pasted in PPT are not aligned and formatted.
By aligned, i mean re-size the graph and paste in a formatted fashion (currently they are overlapping each other)
My entire PPT created is off alignment and formatting. E.g heading are not properly aligned (they are touching the line below) and so on.
I have a filtered worksheet -WB1 (filtered by Column "B"). I want to count the number of cells or rows in column "B"(Only the filtered ones) of WB1. Copy out that exact number of cells from another workbook(WB2) from the bottom moving up(Column "A") and paste it into WB1 column "I".
WB1 - Count Filtered Cell/Row with reference to Column "B"
WB2 - copy Cell count bottom to top of Column "A"
WB1 - Paste into Column "I"
I have data from (row 1, column 1) to (row 53, column 5) on 283 consecutive worksheets in a singular excel file that I would like to be presented on a singular worksheet starting from the data on worksheet 1 and descending to the data on worksheet 283.
I am looking for a copy and paste loop solution that will copy the data from each page and sequentially paste the results on a singular output page in descending order (worksheet 1 data, worksheet 2 data... etc) so that I can sort the data.
I have two spreadsheets in Excel 2003.
Spreadsheet 1 has 10 columns of data (A-J). I want to copy a variable number of rows from spreadsheet 1 to spreadsheet 2.
When I paste into spreadsheet 2, I'd like to automatically insert blank cells in three places, taking the total number of columns to 13. I'd like columns C, F and I to be blank, and the last column with data to be M.
I will perform this task regularly, and add the copied cells to the bottom of spreadsheet 2, so I'd only like to insert blank cells within the range that I'm copying, not the entire spreadsheet.
I will then populate the blank cells with a VLOOKUP function. Do I need another macro to automatically add the formula to the cells, or is there a way to include this in the cell-inserting macro?
I have a spreadsheet witht the following design:
Column A = Date
Column B = Value 1
Column C = Value 2
I have a folder with excel files named by date (e.g. 081212 = 8th December 12). Within each of those files is Value 1 and Value 2. They are always in the same cell (B6= Value 1, B16= Value 2).
How can i create a macro/script where the Values in Column B and Column C in my spreadsheet are automatically updated where there is a Date in Column A but no values in Column B or C?
In other words, i need the script to read the date in Column A and if Column B and Column C are blank, then it needs to find the corresponding date excel file and copy Value 1 and Value 2 into the cells in my spreadsheet.
This macro works fine on my machine but not with other users:
This should copy/paste certain cells then paste 3 sheets into a new work book.
ON other computers it seems to paste in a picture? works OK for me?
Sub ValidationTests()
'
' ValidationTests Macro
' Macro recorded 21/12/2011 by '
'
Sheets("Score Sheet").Select
Range("A8:M18").Select
Range("H18").Activate
Selection.Copy
[Code] ..........
I'm currently working on a spreadsheet for my husbands work in a school environment. All was going well until I hit a wall with the alphanumeric data of the current uk stats system. Is there any way of getting my 4c...4b...4a...etc. to chart?
View 1 Replies View RelatedI need to transfer data to powerpoint from my '4 box' reports in excel.
Essentially copying everything in the range A40:U74 inc charts and paste them into a slide as a picture on the click of a macro button.
I have to do alot of reports like this for my project and it takes up alot of time copying and pasting etc.
I have seen different codes for this but they are either for charts only or text... the one i did see for both, didnt work at all.
Sheet1 contains a chart using a dynamic name in Source Data: Values. The dynamic name data is controlled by another cell. When I copy the sheet - i.e. Sheet1 (2) - and change the control cell, the Source Data: Values in the copied sheet still refers to the original Sheet1.
View 3 Replies View RelatedI am building automated solutions where graphs source data is based on outcome of formulas. In case of line graphs I use #N/A as result if no data is available or formula results into an error - this way the data point and data label will not be shown in the graph.
However this does not work for bar graphs - with #N/A, #DIV/0, 0 or "" the bar itself is not shown but the data label is shown (as #N/A or 0). How can I set-up my formulas so that if result is 0 or formula is in error that the graph does not display the data label.
Attached excel file shows same data in 2 charts - 1 line chart (=OK) and 1 bar chart (=not ok). The data for chart is pulled from 2 other tabs (week&month) and merged into 1 data source for graphs.
I am looking for a way to manipulate xy data graphically by moving points in an excel scatter plot. This functionality was present in older versions of excel, but I can't seem to do it in the MS office 2010 version.
View 1 Replies View RelatedHTML Code:
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
Range Pear
A B C D E
4 1 3 5
5 1 1 1
6 2
7 2 2
8 5 7
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6