Macro: Copy And Pasting Variable Ranges On Seperate Sheets
Nov 4, 2009
I have attached the xls. I have an input sheet with 3 columns to enter data. Each column is linked to a separate worksheet with a formula (Carrys 1000 rows long). I need to be able to pull the populated data from those 3 worksheets and paste into 1 column continuously on another worksheet so all data is on top of another without any spaces.
I made an if statement so that if there isn't data pulling from the input sheet the a blank cell is left to indicate the last row to copy data from and paste on the final sheet.
View 5 Replies
ADVERTISEMENT
Aug 24, 2009
I copy a workbook from a master workbook once copied the modules are not copied but sheet modules exist after copying.
Can I have in a sheet module that will prompt a message box to open and ask to copy the amount of worksheets from the number in cell M5 in Sheet 1 Sheet 2 cell M5 will also contain a number also the other sheets will to Print that qty. of sheets from the workbook. these sheets are name sheet1, sheet2, sheet3 and etc.
But, there are other sheets I would only need 1 or 2 print outs these sheets have names in the tabs.
View 9 Replies
View Related
May 12, 2008
I need to copy all the work sheets into one single work sheet (mastersheet). The source work sheets are having same column structure. The condition which i need to take care of is that after column 3 if at all there is any data till column 10 then in the destination mastersheet these should be copied in different rows with first two columns repeated. I need to do this using VBA macro.
View 9 Replies
View Related
Sep 27, 2013
Code:
Sub Copy_and_Layout()
Dim ws As Worksheet
ThisWorkbook.Activate
For Each ws In ActiveWorkbook.Worksheets
ws.Activate
If Left(ws.Name, 5) = "Sheet" Then
Range("B2:G" & ws.UsedRange.Rows.count).Copy
Sheets("Rev New").Range("B1").Insert xlDown
End If
Next ws
End Sub
So far I have this as a code but it seems to only paste the last sheet at the top ....
View 3 Replies
View Related
Jun 17, 2007
There is a file that contains multiple worksheets. Each worksheet contains a template.
I'm trying to create a macro that will go to each worksheet and gather the information on one line in a master sheet. Then go to the next work sheet and do the same but return the data for that on the next row. And continue to do so until all the worksheets have returned data.
So far I have recorded the macro for the first sheet. How do I get it to now go to the next sheet, do the same thing, but return the data on the next line so it doesn't over write the data from the first sheet?
View 9 Replies
View Related
Nov 3, 2006
I cannot seem to get the worksheet function sum to work with varables in this module. It is placing zeros where the summed data should be. The variable are showing proper start and end ranges for summation....
View 5 Replies
View Related
Jul 11, 2008
Need to pull data from Sheet4 to sheet1 by Sales Person based on a validation list cell on sheet1.
Each Sales person has a different number of accounts listed on Sheet4. The data is setup like this (my apologies for not knowing how to copy and paste the data)
Will Use Jane Doe and John Smith As examples-
A1, Jane Doe, Customer Name, Data, Data, Data, etc.
A2, Jane Doe, Customer Name, Data, Data, Data, etc.
A3, John Smith, Customer Name, Data, Data, Data, etc.
So Jane Doe has 2 customers total, and John Smith has 1 customer.
I am dealing with a total of 300+ Sales People and over 4,000 customers, all with a different number of customers per sales person.
How in the world can I write a code that will pull all of Jane Doe's customers when she is chosen from the validation list, and paste those customers and their coinciding data where I need it to paste?
I have the validation list working, so all I need at this point is help with the copy/paste code.
View 9 Replies
View Related
Oct 9, 2009
I am having trouble with IF, ELSE and END IF statements. In Column H I am trying to copy over rows to sheets based on value according to ranges. I am trying to use the code below but everything seems to get copied in to the first sheet "0-500". d= worksheet name.
View 6 Replies
View Related
Nov 16, 2009
I have VBA code that copies over several sheets from a workbook, but I'd rather not have all the named ranges come through. Whenever I run the macro it gives me this notice: "A formula or sheet you want to move or copy contains the name 'rngRegion2', which already exists on the destination worksheet..." The destination sheet doesn't originally have this range already, it runs into problems because the sheets I'm copying have rngRegion2 defined on different sheets. I'd like to try and avoid this problem all together by not copying named ranges if possible.
If thats not a viable option, is there code that I can use to tell it to automatically select "Yes - To use the name as defined in the destination sheet" as opposed to prompting the user to select yes/no?
View 2 Replies
View Related
Feb 8, 2010
I'm working on a quality control project (for products with Model #'s "1098", "1190", & "1220") for the company I work for and I'm having an issue with a macro.
I have data coming from worksheet "Sheet1" AB6:AB21, that's getting "sent" to worksheets "1098", "1190", & "1220" E86:E101, and "Sheet1" AC6:AC21 -> worksheets in E151:E166
In "Sheet1" cell F4, you enter the Model # ("1098" "1190" "1220"). I'd like this data above to ONLY go to the corresponding worksheet as cell F4 and not ALL model # worksheets. Is there a way that I can do this?
View 8 Replies
View Related
Feb 18, 2010
I'm working on a quality control project (for products with Model #'s "1098", "1190", & "1220") for the company I work for and I'm having an issue with a macro.
I have data coming from worksheet "Sheet1" AB6:AB21, that's getting "sent" to worksheets "1098", "1190", & "1220" E86:E101, and "Sheet1" AC6:AC21 -> worksheets in E151:E166
In "Sheet1" cell F4, you enter the Model # ("1098" "1190" "1220"). I'd like this data above to ONLY go to the corresponding worksheet as cell F4 and not ALL model # worksheets. Is there a way that I can do this?
View 2 Replies
View Related
Nov 19, 2008
to assign a variable to equal a Constant variable, then I need to find the last unused row on the worksheet, then paste that variable down the column (1-12200 or so rows). I also need to assign Strings for the first two Rows in the target column.
View 14 Replies
View Related
Oct 21, 2012
How to accomplish the goal described below.
A , Method of Range Object "_Global" Failed , error occurred upon running the code below at the emboldened statement.
Code:
Sub copytosheet2()
Dim Lastrow As Long, CopyRng As Range, DestRng As Variant, i&
Worksheets("Sheet1").Activate
Lastrow = Worksheets("Sheet1").[A65536].End(xlUp).Row
'
For i = Lastrow To 2 Step -1
[Code] ......
The goal is to loop through columns of data on sheet1 and copy values of cells B-C to the lowest rows on sheet2 column B-C.
Here are the screen shots of sheet1 and sheet2.
View 3 Replies
View Related
Apr 17, 2014
I am relatively new to VBA macros. I am having two sheets, in one sheet I have a non-contiguous 20 rows range and in the other sheet I have a 20 row contiguous range. I need a macro which will compare data between the two ranges(one to one compare) meaning 1st row of the first range should compare with 1st row of the second range and if it matches then it should populate the adjacent column in the second sheet with true or false accordingly.
View 2 Replies
View Related
Dec 6, 2006
I am trying to write what I thought would be a simple macro to print out specific areas of my worksheets. I have shown the code below; the line causing the problem I have highlighted in RED. I am getting the following error message: "Select method of range class failed".
Reading other posts here. I think this may have something to do with the macro being assigned to a command button in one worksheet (AY114) and I am trying to get the macro to run on both the worksheet that the command button is in (AY114) as well as another worksheet (AY062).
Sub CommandButton1_Click()
Range("J2").Select
Sheets("AY114").Select
Range("A4:J53").Select
ActiveSheet.PageSetup.PrintArea = "$A$4:$J$53"
ActiveWindow.SelectedSheets.PrintOut Copies:=1, Collate:=True
ActiveWindow.SmallScroll Down:=45
Range("A56:M151").Select
ActiveSheet.PageSetup.PrintArea = "$A$56:$M$151"......................
View 4 Replies
View Related
Mar 31, 2009
You will find two attachements to this thread. One is a completed example I found pasting charts into PowerPoint Presentation and the other is my example of what I would like done. Difference here is that I am not using charts, instead I am using selected ranges to paste in a PowerPoint Presentation.
Instead of pasting charts to Excel, I would like to make each colored range a slide in the PowerPoint (Please see attachment).
So by click on the command button "Create PowerPoint Presentation", I would like to have PowerPoint open and the two colored ranges should be in the PowerPoint Presentation as Slide 1 and Slide2.
I have done some research on this topic and found information, but I have not clue as how to do it.
View 13 Replies
View Related
May 20, 2012
I'm currently using Ron's BuildToHTML Coding in "Example 1" (as can be seen here: [Code] ....... ) but I'm unable to tweek the coding to paste multiple ranges into the same outlook body.
For clarification, I have 2 charts in different tabs: Sales & Purchases. Following Ron's code I can change the coding so it copies Sales but I am unable to code the macro to paste the Purchases chart in the same outlook directly below Sales.
Sub Mail_Selection_Range_Outlook_Body()
' Don't forget to copy the function RangetoHTML in the module.
' Working in Office 2000-2010
Dim rng As Range
Dim OutApp As Object
Dim OutMail As Object
[code].....
View 3 Replies
View Related
Aug 25, 2010
I am trying to build a macro to work with a template file.
The template file has set sheet numbers and names (with one exception, see 4) below).
There are close to 40 sheets in all.
Some sheets are never printed.
Some sheets are always printed.
Many sheets are printed only if they are used.
Most of the sheets are 'break out' sheets and a variable number of them will be used.
So... Here is what I'm trying to accomplish.
1) Always print Sheet4(Overview1)
2) Always print Sheet6(Overview2)
3) Print Sheets 11 thru 40 IF value in cell G50 on these sheets is > 0. Note that this cell has a name (Total) and I would like to reference the name if possible. (It could happen that further evolution of the Workbook moves the cell up or down a row.)
4) Print Sheet38(Data Sort) IF it exists. Otherwise, print Sheet1(Data).
If the information on the Data sheet is limited (eg only 1 or 2 pages), we print it off directly. If the information is more extensive, we copy it to a new sheet and sort it (Data Sort).
I can achieve 1) and 2). I'm not quite sure how to go about 3) as I'm still not very good with macro loops. 4) I haven't tackled yet.
View 3 Replies
View Related
May 24, 2008
My goal is to macro the creation of pivot tables into seperate worksheets based on each particular record in the "Office" (location). Ultimately, I will apply an email macro to send out each pivot table (and source data if necessary) to various recipients. I need to make sure that each recipient of a pivot table is limited to only drill into the detail for their particular "Office" and not able to view other location's information in the Source Data worksheet--is this possible, or do I need to create separate source data worksheets for each Office's pivot table in order to limit the viewing?
Items I need guidance on:
Creating a macro to breakout pivot tables into seperate worksheets based on "Office" locationPlease advise on how I can secure Pivot Tables so that the user can only drill into the information originally presented in the pivot table they receive and will not be allowed to view all of the source data.
Please find attached a file with my source data and an example of a pivot table for one of the Office locations (Chicago).
View 9 Replies
View Related
Aug 4, 2008
I have 1 workbook, with 3 sheets. Sheet1 (EVER) has 3000+ rows and 12 columns of customer information. This sheet is for all customers who have ever placed an order. Sheet2 (06-07) has 1500+ rows and 12 columns of customer information. This sheet has all customers who have placed an order in the last 2 years. Sheet3 has 1 row, which consists of the column titles (12 columns) that are on Sheet1 and Sheet2.
I need to put all customers that are on Sheet1, but not on Sheet2 in Sheet3. I have tried VLookup; advanced Filter and a number of codes in the last 3 days and have not been able to figure this out.
View 6 Replies
View Related
Sep 30, 2013
I am trying to write a macro where I have to select a name, copy it and search in a Pivot filter if a certain condition is met. I am stuck at a place where I am unable to paste the selected value as a variable.
Code:
For Each cell In .Range("I2:I" & .Range("I" & .Rows.Count).End(xlUp).Row)
If cell.Value = True Then
Range("G" & N).Select
Selection.Copy
Range("A3").Select
ActiveSheet.PivotTables("PivotTable1").PivotFields("QC POC").PivotFilters.Add _
Type:=xlCaptionContains, Value1:="selection.paste"
The portion which is in bold (Value1=) needs to contain my selection (which is actually a name)
View 8 Replies
View Related
Jul 23, 2009
Attached file where i m not able to split data in seperate seperate coloumn
View 3 Replies
View Related
Apr 21, 2013
I've got several worksheets that all have the exact same layout that a user will enter unique information in to each worksheet. Then I've got a final worksheet that I want to have a button that the user can click and when they do, it will look to each worksheet and do the exact same process for each worksheet as follows:
It first looks to see if the worksheet is visible. If it is, I want it to copy the range A5 to K5 down until it gets to the last non-blank cell in column C. The first non blank cell that will be referenced will be C7. Then I want it to paste this information into the range A5:K5 on the final sheet named Sheet8 with the same values and keep cell formatting such as width and height, font. If the worksheet is not visible, it skips the sheet.
I want it to do this for each visible worksheet, placing the next visible worksheet info under the previous visible worksheet info. My current code as shown doesn't do that. It requires that something be inSheet8 A6 before it will even paste, then it pastes the info from A5:K5 but it doesn't do just the values nor does it keep the formatting. What I mean about not doing just the values is some of the info that needs to be copied comes from a drop down they can choose from and it copies the actual drop down menu. Also, it seems to copy all of the ranges from each sheet and paste it into just A5:K5 on Sheet8 and overwrites each other instead of pasting Sheet2 just below the information from Sheet1. So the only information shown after the entire process is completed is the information from the last visible sheet.
If Worksheets("Sheet1").Visible = True Then
Sheets("Sheet1").Range(Sheets("Sheet1").Range("A5:K5"),
Sheets("Sheet1").Range("C7").End(xlDown)).Copy
Sheets("Sheet8").Range("A5").End(xlDown)
End If
[Code]...
View 4 Replies
View Related
Jan 27, 2012
I looking for a macro to look in a list in worksheet "Map_Ref", and take the Range Name of column "A" and copy that range in the corresponding Tab and range as specified in Columns "C" and "D" (i,e. take range name "BB Staff Counts_Tenured" from cell "A2" and copy that range in worksheet "Sheet2" (as specified in cell C2), range "A2" (as specified in cell D2). And so on.
List of worksheet "Map_Ref":
Column AColumn BColumn CColumn DTable/Range Title/Name:
Range in Tab "CMD_1"Copy to Tab:To Range:BB_Staff_Counts_TenuredA126..Q156Sheet2A2Branch_Counts_BBmarketsA35..
C47Sheet2A59Branch_Counts_Chase_SBRM_RegA30..E33
[Code] ........
View 6 Replies
View Related
Jan 28, 2009
I get several workbooks from co-workers in other cities. They include data like the total run time for production. When I copy the time 24:03 fom one cell in their spreadsheet to my spreadsheet it shows up as 0:03. I've already double checked that I'm grabing the right cell and that the format for the cell is correct.
View 2 Replies
View Related
Oct 12, 2011
I wish to copy a range which has the variable adderss in a cell.
Example the address is located in D2 and the address in that cell is B4:R113
I want to select the information in D2 for copying.
View 4 Replies
View Related
Aug 15, 2007
I am trying to write a very basic macro to copy and paste, but when I record the keystrokes, step 4 (see below) seems to be recording absolute cells and not relative (?). At any rate, I can't seem to figure out how to get it to select the text the way I want it to. These are the keystrokes I want:
1. Ctrl-c in the current cell <copy the current cell>
2. DownArrow <move down one cell>
3. Shift(hold)-End-Down <select the blank spaces from here down until the next occupied
cell>
4. Shift(hold)-Up <move the selection up one from the bottom to exclude the occupied cell>
5. Ctrl-v <paste>
6. End-Down <move down to the last occupied cell>
I have set the record tool to record "relative" references.
Below is the code that was recorded. It's line 5 that's not working - how do I fix it? What is the command to tell the program to press the shift key and an up arrow?? Such a simple thing, and yet I can't find the answer anywhere! Things sure have gotten complicated since the old Lotus 1-2-3 macro language...
Sub Fill()
Selection.Copy
ActiveCell.Offset(1, 0).Range("A1").Select
Range(Selection, Selection.End(xlDown)).Select
ActiveCell.Range("A1:A17").Select
ActiveSheet.Paste
Selection.End(xlDown).Select
End Sub
View 8 Replies
View Related
Dec 17, 2011
If I have a formula on Sheet2 which creates conclusions depending on data already existing on Sheet1 and then I need to paste the same formula on Sheet4 in order to get conclusions from Sheet3, then what can I do? Every time I am trying to paste the formula, it connects it with Sheet1 instead of Sheet3
In other words
Sheet1: Data
Sheet2: Extracted conclusions from Sheet1 data based on a formula
Sheet3: Data similarly organized as in Sheet1
Sheet4: How do I extract the same conclusions, but this time from Sheet3?
The formula on Sheet2 is:
=INDEX(Sheet1!$E$312:$E$5000;((COLUMNS($A4:B4)-1)*20)+1)
I would like to copy this formula from Sheet2, then paste it to Sheet4 and then to have it appearing as
=INDEX(Sheet3!$E$312:$E$5000;((COLUMNS($A4:B4)-1)*20)+1)
Is this possible?
View 7 Replies
View Related
Jun 27, 2014
I need a macro that will create a sheet at the end of the workbook.
Sum data from a variable amount of sheets and display that data on the created sheet.
Here is a step by step:
Starting on sheet 5.
Column D has a variable amount of part numbers in it. These part numbers would be different between the ascending sheets.
Column T, U, V has an inputed number in it that would need added up across all duplicate part numbers in all the sheets.
(Note: The data would also need started on row 4. Everything above row 4 is headers)
Here is a small example:
D E T U V
13019090W Part A1
68705500 Part B1
64202900 Part C-11
59634600 Part D1
26005300W Part E1
I need the macro to start with sheet #5(starting on row 4). Check to see if there is data in column T, U or V. If there is, to create a new sheet at the end. And copy the entire line into that sheet (starting on row 4).
After that, to check every sheet after (excluding the newly created one, starting on row 4) for data in Column T, U and V. And then check for duplicates in Column D on the newly created sheet. If there is a duplicate to add/subtract that number in Column T, U and V to the SUM in column T, U and V in the newly created sheet. If there is no duplicate, to copy the entire line to the new sheet.
So that when finished. On the new sheet, you have the SUM of T, U and V for everything that has data in T, U or V for all of the previous sheets, plus the entire line of the first instance (excluding the first 4 sheets).
View 2 Replies
View Related
Sep 24, 2013
I've found some code which works to print certain pages with value in cell A1 but I need to print dynamic ranges on some of the sheets as they will have filters on so the rows ranges will be different each time.
So far this is what I have but the dynamic range part is not working:
VB:
Sub Print_All_Worksheets_With_Value_In_A1()
Dim Sh As Worksheet
Dim Arr() As String
Dim N As Integer
[Code] ....
View 3 Replies
View Related
