Looking for a formula to accomplish the following:
I'm trying to populate cell A31 on a worksheet titled "VolumeTotals" with the data in Cell E23 from a worksheet titled "CurrentCustomers" if the merged cells F3-F22 on worksheet "CurrentCustomers" are equal to the word "Contract".
I am trying to have my spreadsheet pull data from one tab and cell if they match another.
Tab "Ag Orders" column H, I enter data in lets say cell H37. Whatever I enter, if it matches tab "reference List" C:C, then "ag orders" column G (specifically G37) should enter the data in "reference List" D:D
So since in H37 I entered 34000 - 314620, G37 should pull in Farm Operations since on the referene list tab that string of numbers (C11 matches up with D11)
a little confusing but I hope it makes sense.
13-14 budget-AG.xlsm
This isn't the exact formula I used but something like it and it wasn't working. It wouldn't match the data up correctly on a few of the department names
=IFERROR(LOOKUP(H35,("11000 - 311010","11000 - 311020","11000 - 311510","11000 - 311610","11000 - 312010","17800 - 311010","17800 - 311510","17800 - 312010","34000 - 314610","34000 - 314620","34000 - 314640","34000 - 314660","34000 - 314680","34000 - 314690","81008 - 840008","81009 - 840009","13863 - 312040","13864 - 312050","71060 - 521620"),
[Code] ..........
I have a spreadsheet that has been given to me by someone else, and unfortunately it has merged cells in it that are causing some trouble. I need to have a way to unmerge the merged cells, but for the data in the merged cell to then be copied into each cell that it splits into.
I've attached two spreadsheets - unfortunately I can't really attach the real one since it has research data in it, so I've reduced the size of the file and replaced some of the text. The first file shows how the file starts off, and the file named "result" shows how I would like it to be.
My real file contains some 10,000+ lines of data, and the merged cells are of varying sizes, with no consistency to the size, so I'd like a way to automate this instead of copy and pasting into every empty cell after I unmerge them.
I'm trying to make a floor plan which shows what seats are available depending on the time it is. So I made sheet1 = to the map (where the seats are located), sheet2 - rows = seat #'s, columns = Time (broken down by half hours). Now i have conditional format to show "t" in red (which means taken), "f" in blue (which means free), and "n" to show in gray (which means not working).
What i need is example - Seat # 200 in sheet 1 to show red, blue, or gray depending on the value in the row that corespond to this seat and the column that corespond to the current time.
I want to pull data from closed workbook based on cell values of open workbook of column B and the source file name is on cell J1. Actually I save monthly files and opening balnce of current month should take vakues from previous month file.
Suppose current month is May 2008. Then Column Column D for May month shold take value from column G of April 2008. For simplicity the previous month’s name and thus source file name will be placed on cell J1.
The code should loop from column B of source file and current May 2008 file and should pull values for only those items which are in the current file in the Column B. Thus those products which are deleted or newly added item in the current item should not copied. Though for new item no name will be thre in the source file but for deleted items the item might be there in the source file but the code should ignore those value.
I have a spreadsheet that is updated weekly -- but every week new info is added that needs a user to input corresponding info. I use a vlookup function to link to another spreadsheet that populates the info from previous weeks and the info that is missing shows up as #N/A...
First I was using a msgbox function to get the info:
HTML Code:Â
For Each b In myrange
If Application.IsNA(b.Value) Then
Employee = b.Offset(0, -2).Value
SSID = InputBox("Please enter ID# for " & Employee & " :", "New Employee Found")
b.Value = SSID
End If
Next b
But it can be up to 30 different new employees... and that is time consuming.
I would like to make it more user friendly by creating ONE userform that displays all of the employees as labels -- has a text box in which to put the ID # -- and then has a drop down box to choose the type of employee (2 options). I want all of that info to go back to the reference spreadsheet so it will be saved for following weeks, and then redo the vlookup to get the info into the new weekly spreadsheet (I can do that part)....
HTML Code:Â
Private Sub CloseButton_Click()
Unload UserForm1
End Sub
Private Sub ComboBox1_Change()
[Code] ......
I try to unmerge cells A1:A5 based on a value "unmerged" in cell G1.
Also if I select "merged" in cell G1 (data validation), then cells A1 to E1 will merge to a single cell A1.
I have a spread sheet with merged cells in that contain data, when i ask excel to seek blank cells and delete them moving the others up it also deletes the merged cells.
View 1 Replies View RelatedI am not sure how to pull the value/data from a merged cells, which is common a value/data for the corresponding entries.
The data is as under: -
OT HOURS
NAME
48
RAVI
RAJU
RAKESH
24
RANI
ASHOK
Here is what i'm working with:
http://img90.imageshack.us/my.php?im...uestionas8.jpg
what i want it to do is pull out the stuff in column C and put it in column F. But i don't want it to duplicate it at all. So for instance in this case, submarket 1 would be cary-morrisville-apex / submarket 2: northwest wake / submarket 3: north wake etc.
would this involve a VLOOKUP function but an if then function as well? I'm not really sure how to go about it.
I've been using the DSUM function to pull in data from another worksheet.
In brief, the problem is that when I Cut & Paste the formula from C7 to C8, I want the Column reference to change but not the Row reference.
If I copy across the Columns then the result is OK – e.g. The Formula will change from…
#=DSUM([HBAP_SHUTDOWNS_2008.xls]NWM_SuccessfulShutdownsByDepartment!$A$4:$E$2924,"Total",'Calculations Page'!A$17:A$18)#
To…
#=DSUM([HBAP_SHUTDOWNS_2008.xls]NWM_SuccessfulShutdownsByDepartment!$A$4:$E$2924,"Total",'Calculations Page'!B$17:B$18)#.........................
I recently created a spreadsheet to calculate the value of certain stocks. I chose to do the s&p 500. It can take a while to manually get the info I need, so I looked to videos on vba writing and different solutions. I do not want to use web queries. Rather, I'd like to use a simple formula that pulls the necessary "single" item from a webpage and puts in a cell, then I will simply copy and paste that cell for all stocks.
from my online endeavors and inquiries, I put together this POS:
Function vi_Price(ByVal Symbol As String)
Dim IE As New InternetExplorer
IE.navigate "[URL]...
Do
DoEvents
[Code]...
Using Google Chrome, I tried to find the "element" that I need. In this case, the last close price at the top of the webpage. It's hard to distinguish which it is. If I can just get the code to work for the price, I think I can modify it for the other 3 items I need.
How do you view or display data from cells that have been merged?
View 8 Replies View RelatedI am using the following functions to determine the highest row and column that contain data:
View 4 Replies View RelatedI have been using a macro to search and highlight customer addresses for me, however I have changed my worksheet and now have the addresses in two columns instead of one (D for the numbers, E for street names) for sorting purposes.
What I would like to do is either; find a way to search using data from 2 cells to get a result, or have multiple results highlight and popup.
Using: Excel 2010
Code:
Sub SEARCH_FUNCTION()
Set FoundCell = Sheets("Route").Cells.find(What:=Sheets("Intro").Range("G15"), LookIn:=xlFormulas, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False, SearchFormat:=False)
If Not FoundCell Is Nothing Then
With FoundCell
[Code] ...........
i have a sheet that i have been creating to pull information based on two things. The criteria is an emplyee # and the second is a date.
The data needs to be organized onto Sheet4. The Employee # will already be on Sheet4, so i have been trying to use that with Vlookup / hlookup with no success as i can't seem to get it to find the correct Date and place the data correctly.
Sheet4 layout:
Completed (with respective data from Sheet2)
A
B
C
D
E
1
[code]....
the data is located in Sheet2 (Emplyoee # is always in Column A, and the Date is always in Column B).
the data needs to be pulled into Sheet4. Essentially making the horizontal data of Sheet2, Vertical on Sheet4 under the respective date column.
Sheet2 Layout:
A
B
C
D
E
F
G
H
I
J
[code].....
I have a worksheet entitled 'Data'. In this worksheet there is a table consisting of 4 columns plus relevant data:
TABLE 1:
Project
Benefit Type
Delivered or Enabled
Benefit
PJ1
Financial
Delivered
Saving of $4M over 24 months.
[code]....
I have been trying to create a formula that will enable me to pull data from the 'benefit' column(column D) so that the cell contents populate in a single cell in a table in a different worksheet.
TABLE 2:
Financial - Delivered
Financial - Enabled
Tech - Delivered
Tech - Enabled
Green - Delivered
Green - Enabled
[code]....
So, as an example, I am hoping that a formula can be created which pulls the text from relevant cells in column D when criteria from columns A, B and C are met e.g. Tech benefits that are Delivered in PJ2 would populate cell E3 ('Tech -Enabled') in Table 2 with:
Continued maintenance of hardware.
Increased capacity.
I am moving along in my masters project and I am having a problem organizing some data I got dumped with.
What I have is a 196 x 196 matrix of the worlds countries and the distance between each one. So each Row has a title header of a country and each column has a country and the cells between the two are the distance of said countries.
On another sheet I have about 10 000 different combinations of dates/years/months ect that I need to populate in order for Stata to work properly.
Rather than manually enter thse in one by one or copy paste what I would like to do is write a code that would do something like this.
If on sheet 2 (the combination sheet) A3 = Afghanistain and C3 = China than F3 = The China/Afghanistain intersection (In this case AN3 on the Distance Sheet)
I am having problems because I can't see to figure out a way to have a program lookup the intersection and give me the China/Afghanistan number based on all the conditions. I am assuming I need to use a matrix lookup of some sort. This way when I do some like Canada/Denmark on the Combination sheet, it will automatically look up and populate the distance from the distance sheet (That being AZ33).
I'm compiling data from field reps that comes in a big spread sheet. I want to pull the rows out that fall into a certain date range. For example, if it falls between January and March. How would I do this?
Company 1
3/5/14
$54,000
Q1
Phase I
10%
Company 2
2/1/14
$16,000
Q4
Phase II
80%
Company 3
12/1/13
$18,000
Q2
Phase I
20%
I have a bunch of different worksheets that I need to pull a single cell from (lets say A1). On my summary sheet (first sheet) I have a list of all the worksheet names. Is there a macro that can pull data by referencing their names in the summary sheet.
Example: Column A has a list of all the worksheet names in my workbook. I want to extract cell A1 from each worksheet based off the name in Column A and be put into Column B. Otherwise, you would have to go through each tab and link it (I am working with 100+ tabs).
Column A Column B
PIN
CID
SIP
I have 2 worksheets (Sheet1 and Sheet2). Sheet 1 contains around 3000 records with multiple fields (columns). Column A contains the ID number. Sheet 2 contains some records with different fields except for the ID number which is common.
I need a macro to retrieve information from sheet1 and copy it to sheet 2 based on the ID Number; i.e the macro needs to get the ID number from sheet2, locate it in sheet1 and copy the data from column D in sheet1 for that particular record and paste it in sheet2.
I use my workbook to track sales data from one store to the next. I use my workbooks to compare data from year to year. Each year's data is displayed on a separate worksheet. '2013' has 2013's data, '2014' has 2014's. On the 2014 sheet, I have a Prior Year's Sales that pulls data from the previous year's spreadsheet using a formula which I just drag down each day I enter sales. I would like to automate this process and have the VBA code check for today's date and automatically pull the previous year's sales data from the '2013' sheet and put it in the appropriate cell on the '2014' worksheet. I hope I have explained this well enough to understand. I've included a link to my workbook for reference.
I had to use dropbox since I can't post a file over 1 MB. The file size is around 1.25 MB.
I used this forum to successfully prevent a user from saving a workbook without entering data in a certain cell. However, I now have a merged cell that I must refer to when writing my "before save" code and don't know how to refer to that cell. Below is what I have: One workbook with nine worksheets. The merged cells I want to refer to are H11 and I11 in sheet seven. User RYLO posted the below code that worked for me but I don't know how to alter it to refer to a merged cell.
View 4 Replies View RelatedI am including a sample. On sheet 1 I am trying to do data validation in that large merged cell using List and =Cements. Why do I get the error that pops-up?
View 5 Replies View RelatedHere is what I have and am trying to do:
I entered the date and day in this format in multiple sheets in workbook 1 (named 0101, 0102, 0103) from the start of the year to last night (B2:C4):
Date:January 01, 2013
Day:Tuesday
I then entered all the data needed below that (B5:E26):
TimeTransactionsTotal SalesAverage Sales
12:0039 $352.97 $9.05
13:0053 $416.98 $7.87
14:0044 $339.42 $7.71
15:0043 $304.96 $7.09
etc.....
In workbook 2, I have sheets named for each day of the week. I would like to take the information from the previous three weeks for each corresponding day from workbook 1 and put the averaged data into another table with the data all formatted the same in workbook 2. This way, each week when I go into the aggregate file (workbook 2), I can look at the chart I'll create and see the average of the past three weeks transactions, total sales, and average sales for each hour of the business day and be able to staff accordingly (assuming the trend continues).
I am trying to make Excel pull data out of a closed file based on a date range. The closed file is a log where people input data and enter the day they are doing it. I need to pull this data in my file and make it print into my worksheets so I can pass a report on to others with only the data they request from the log.
The range would be for 7 days and would have to be able to choose a few columns off this report.
I have a multiple column spreadsheet (Call it- "Money") whereby I need the data identified based on a list of account numbers and return this data to a new sheet.
In "Money" I have:
IE; columns B, C respectively have cust #A100 & 20.00
columns E, F respectively have cust #B100 & 40.00
columns G,H respectively have cust #C100 & 60.00
Etc.
(above for illustration-there are 100 lines of data in these columns with varied account numbers and respective dollars)
So what I have now is a new sheet I have named "Control". I have listed all my account numbers like A100,B100 etc. in column A. These are the account numbers for ident purposes.
I need the data entered in "Money" identified by those columns B,E,G with respective amounts from C,F,H and based on the list I have in "Control" whereby in "Control" if A100 is listed in column A then the figure to be returned in column B is all the data bits found in all columns C,F,H from the entire sheet "Money". Tough to explain but ie below....
I'm looking to create a macro that will take data from an input sheet, and paste it into a cell in another worksheet, based on criteria specified in sheet1.
Specifically in the attached example, the macro would copy the data in cells C8:C10 of sheet 1, then paste them into sheet 2 based on the data specified in cell B3 i.e. it would paste them into the column headed Mar-09. I intend to make this cell a drop down, so that the user can then select the next reporting month and run the macro again to paste the data into the Apr-09 column.
I wish to copy a merged cell (3 cells) based on if only 1 of 3 cells to the right contain "X". if the top cell does not contain "X" than the merged cell is not copied. Also, is therea more elegant to copy 3 columns at a time rather than do one at a time as my code shows:
Sub CopyICUCAPU()
'
' CopyICUCAPU Macro
'
Dim i As Integer
[Code].....
I would like to have a macro to automatically generate a statistics table (on the "statistics" tab) with the 5 following fields:
Fragment names / # samples / # of failed samples / % of success / # of variations in the fragment (SNP). At the bottom of this table, I would like to have a cell with the average % of success for all fragments. The data to generate these statistics are on the "gene name" tab (please note that this name will change every time I will work on a new gene). To make things easier, I think the macro should be run from this tab.
1. The Fragment names are displayed in row #5. I use one column per variation per fragment. If one fragment has 3 variations, there will be three columns and I will merge together the fragment name cells. The fact that some cells are merged can be a problem when copy-paste to the stats table (as I would like to get rid of the merging).
2. # of samples corresponds to the number of cells in blue in column A. The number of samples can change from one report to another but is always constant in the same report.
3. # of failed sequences. In the table, I type "Failed Sequence" (if the analysis has failed) and "Missing Sequence" (if the analysis has not been done). When a sample is failed or missing, it is for the who fragment, no matter how many variation there is in the fragment, so I usually merge the cells of all variations for this failed sample.
4. % of success: this is quite easy #sample/#of failed+missing sequence for this fragment
5. # of variation is equal to the number of variations for this fragment (can be 0, 1, 2, etc.). When there is no variation in a fragment, I put '-- in all cells of the corresponding fragment on the "gene name" tab. Fragment 3 on my file is an example of 0 variation.