Pasting Constant Formula Where Referral Sheet Changes
Jan 1, 2006
I am creating a data tracking workbook. Information is entered into cells on
different sheets, then the tallies are pulled to one easier to read sheet.
In creating the tally sheet, I am setting the cell formulas. The cells
referred to are constant, only the sheet referred to changes. For example,
the cell might read
='FP 1'!$I$25
and the next one should read
='FP 2'!$I$25
....and so on. I would like to be able to paste the formula and have the
referred to sheet change so that I do not have to go through and make
hundreds of little changes.
I wish to create a spreadsheet which has formulas which would enable me to see if a patient has had more than one referral created within the next 30-90 days [the actual number of days not important - the ability to modify the formula to reflect which time period required would be cool] and also to see if a patient has been referred for the same medical condition again. Thus in my mind at least two different formulas - has the patient been referred again within a time period of days and has the patient been referred again for the same medical condition.
Attached is an example referral spreadsheet I have created
On Sheet1, Row 2 I have my columns named January-December, which correspond to the names of the other 12 sheets in my workbook. I want to test and sum the same range of cells in each sheet by simply coping and pasting the formula. I am using INDIRECT and SUMPRODUCT, but is there a better way? It seems to have caused the sheet to run slowly. Perhaps it's just the amount of data. Here is an example of the formulas I am using:
I have a userForm (Form1) that contains a persons name that I would like to reference in a separate UserForm (Form2). In the separate UserForm (Form2) I need to reference this persons name many times, so I was wondering if there was a was to declare this name in the separate UserForm (Form2) as a constant. Only thing is that a constant, to the best of my knowledge, must be an expression and not a variable. Mainly, I'm trying to avoid declaring the myName variable in each Sub within Form2, which it will be needed for a ton of Sub's.
Code for Form2: Const myName As String = Form1.txtName.Value
Ok, I have a spreadsheet that I use to track the majority of my work throughout the day. I have about 10 columns that I use for my own information, and about 4 of them that my colleagues need updates on. I have one sheet "worktracking" and another sheet "printable." Printable has just the 4 columns of info that my colleagues might need, formatted in a way that prints out nicely. Each column in "printable" references a column in "work tracking" like this
='worktracking'!c2
Now the problem that I'm running into is that I routinely delete rows from the "worktracking" sheet, which results in a reference error on the "printable" sheet. I am wondering if there is a way to rework it, such that when I delete a row from "worktracking," then "printable" just does the same, and only retains rows that have data in them...
Most of the methods used for returning the sheet name are quite cumbersome. "=MID(CELL("filename",A1), FIND("]",CELL("filename",A1))+1,256)" takes up a lot of space in a larger formula.
Is it possible, please, to create a Name which returns the sheet name? For example I could write "=ThisSheet" and it would return the name of the sheet.
Of course I could resort to a UDF, but I wondered if it could be done directly in Excel.
When I try to insert the formula "=MID(CELL("filename",A1),FIND("]",CELL("filename",A1))+1,256)" into a Name, Excel helpfully converts A1 to "'Sheet1'!A1". So "=ThisSheet" in Sheet2 returns "Sheet1".
If I make the sheet name part of the Name, as in "'Sheet1'!ThisSheet, it works OK, but has to be added for each new sheet (though it works if an old sheet is copied).
If I have a formula that I want to copy throughout a column, but I want to keep one of the parts of the formula constant, is there a short way to do this?
For example:
First cell is A1*O24 Second Cell is A2*O24 Third Cell is A3*O24
Right now when I try to copy the formulas, the second cell always reverts to A2*O25, which is not correct.
I need an equation that lets me determine whether a cell contains a static constant value (either a string or a number), or an equation that generates a value.
Problem: I have a cell that contains a default equation that generates a default value, depending on a few conditions. The user can overwrite this cell with a constant. In another cell I need to know whether that cell is still the default equation or a new constant value.
I cannot simply test the value of the contents to see if they match my default, because the user may choose to enter that value.
I have the following array function that I am trying to get to work properly:
ActiveCell.FormulaArray = "=SUM(IF(NCR!O2:O100=39326,NCR!Q2:Q100,0))" 39326 is the value of 9/1/2007, and this formula works properly.
I am looking for a way to use this formula but replace 39326 with whatever date is in the first row of the same column as the active cell when it is run.
That is, if the macro was run with cell B8 as the active cell, "39326" would be replaced with whatever value was in cell B1.
I am creating on the fly an array (2 columns) in which the one row cell is mathematically derived from its neighbor (A left-hand cell). However, when the mathematically derived product exceeds a value, the row neighbor changes to another constant until its neighbor's product exceeds another value, etc. Can I create such an array without resorting to VBA?
I need to copy it to numerous other cells. However I need the row fourteen values to remain the same while the other values change according to which row I'm copying it to e.g
I have a template with formulas calculating a default value, but still allowing the user to override the cells with direct input.
I want to use conditional formatting to highlight any cells that have been overwritten, but can't find a way for Excel to differentiate between a cell with a formula or an inputted constant.
I realize there is a VBA "isFormula" function, but I don't want to have to use VBA for this.
I am trying to use a combination of dependent named ranges and variable length ranges, so one can select in eg Col A truck name from a drop down list, and then in Col B, the engine variant only for that make of truck. The indirect(substitute) function works well if I define the dependent range name (the engine variant) using actual cell refs. However if I use the variable length name definition as described in Ozgrid (ie with offset function), I get an error message and the dropdown menu freezes. Is there anyway to overcome this without resorting to VBA?
I have an excel workbook which requires us to enter the log details of some sites and then a report is generated using these logs (report attached) . [URL] .......
I want that excel should automatically identify the site and calculate its outage with the following formula:
Outage %age= Total Outage(min)/100.80 and add it in the respective column while identifying the outage.
e.g. if outage is of power then the calculated %age outage should be pasted in the power outage column in front of the respected site.
e.g. in the sheet attached above the first row in the first sheet states that SKU2326 was down for 50 mins
Now %age outage will be Outage %age= 50/100.80 Outage %age=0.496
Now as the outage is related to power so this outage should go into power column in sheet number 3 labelled as "Network Total Up time Week#17"
Now the next time SKU2326 becomes down it should be added with this 50 mins and the outage calculated as presented above.
I am trying to build a spreadsheet to calculate referral fees paid to our agents. These are sliding scale fees and I need the formula to consider both the high and low range of the project value. For example we pay a certain percentages for sales in the following ranges:
Up to $5,000,000 (I got this one to work) $5,000,001 to $7,500,000 $7,500,001 to $10,000,000 $10,000,000+
I assume the best way to do this is with an IF command but I only know how to use it for a single value, not a range. Also, if the statement is not true, then return $0.
I have several sheets with one master sheet. I have a trigger on each sheets that manipulates the data on that particular sheet. Here is the code I'm using:
Code: Private Sub Worksheet_Change(ByVal Target As Range) Dim r As Range Dim cell As Range
Set r = Intersect(Target, Range("A:A"))
[Code] .....
Now the point where i put new code is where i want the information from that particular row, column a thru column m to be special pasted linked to the first blank row from the top down to be pasted starting over from Column B. so A1 would be pasted on B1. I ran the recorder and got this as the code ActiveSheet.
Paste Link:=True so i do i incorporate what i want.
I have multiple worksheets and I am looking to take specific information from those worksheets and paste them into a new one, thereby compiling the information. The "C" column is populated with certain cells that say "Not Acceptable". This varies from sheet to sheet, but all in the C column. I'm looking for a code that will run through all the sheets, find the cells that say "Not Acceptable", copy that row of information it is in, and paste it onto a specific sheet that we'll call "Summary"
I'm trying to write very simple code that copies totals from one worksheet and pastes to a different worksheet. Normally, it is a one cell to one cell copy/paste. For instance, I want to copy the total found in cell "C4" in Worksheet "BalanceSheet" and paste it into cell "C14" in Worksheet "SpreadFinancials." I'm able to do this fine, and the code below is what I've been using.
Occasionally though I'm needing to sum up 2 cells in Worksheet "BalanceSheet" and only copy/paste the summed total into one cell in Worksheet "SpreadFinancials". For instance, I want to sum the totals found in cell C8 and C9 in Worksheet "BalanceSheet" and then paste that summed total into cell "C8" in Worksheet "SpreadFinancials". I'm looking for simple code that does this. Here's an example of what I've been doing so far for one cell to one cell copy/pastes:
Sub PopulateFinancials() Sheets("BalanceSheet").Range("C4").Copy Sheets("SpreadFinancials").Range("C14") Sheets("BalanceSheet").Range("D4").Copy Sheets("SpreadFinancials").Range("E14") Sheets("BalanceSheet").Range("E4").Copy Sheets("SpreadFinancials").Range("G14") End Sub
I am using 'Dim' to define a string for SheetName, a variable.
I have tried with no success various ways to try and paste data to a sheet with this variable. I know the variable is correct as I am using it to make a new sheet then rename it and also move it.
I need a macro which goes thru the columns A to K, picks up the value in the filled cells and paste them all in 1 column on another sheet, like sheet2 A1 onwards. Attached is an example of the file.
I am using the following code to paste an excel generated chart into ppt. How do I adapt it such that it only pastes the charts from sheet2 and not the entire workbook?
However, I need to hide the sheet, but it doesn't work because you can't use .select on a hidden sheet I believe. Any way of doing this to a hidden sheet?
I am trying to create a macro that will take inputs entered into a range of cells in 1 worksheet and then paste it into another range on another sheet. The target range is selected based on a condition and once the values have been pasted then the target range should be locked.
I have been trying the following code but keep getting the Run-time error 1004 telling me that the PasteSpecial method of range class has failed. Can some one explain what I may be doing incorrectly?
Code:
Dim i As String i = Range("Month").Value
Select Case i
Case "January" Sheets("INPUT SHEET").Select Range("Input_In").Select Selection.Copy
if anyone has some vba code that can help with keeping latest duplicates when pasting to another worksheet.
Basically, I have a worksheet with YTD data and another worksheet with data for the current month. I need to paste the data from the Month to the YTD sheet. However, if the data (a reference number in column A) already exists, the row from the Month data should be pasted over the duplicate in the YTD sheet, and if it doesn't exists, it should paste it as a new row.
At the moment I'm just copying the whole lot to the YTD sheet and then try to remove duplicates, however, once it's pasted, I don't know which ones to remove.....
I have values printed between from c5:c14 ( not always all 10 will be filled up. sometimes can be 1 also). Wanted some code or method where any value in this gets pasted in the second sheet from A1 onwards. Also whatever number of times I paste it keeps on adding one below the other in the A column in the second sheet . Important : If there are blank cells between one value and other in the working sheet, then it should eliminate the blank space and paste it in sequence in the second sheet. i.e if there are values in c5 , c8 , c14. Then when pasting in the second sheet it will be in A1,A2,A3.
I am looking at trying to develop a workbook for my job that would make things alot more efficient.
Firstly, I download data from a web based app into excel. I now want to take certain full rows and paste them into another sheet depending if they have certain text in a cell. So i want to search the entire coloumn for a value of "OR" and if this is present copy the entire row into a new sheet ?
I need to figure out a way to search for a string in column D and then paste the entire row that string is in to a new sheet. I'd like for this to continue until I paste all of the rows of that string into the next sheet. This is what I got so far, and when I run it, it says an error occurs and then it says either press enter or paste. After I hit enter, it pastes the first row to the next sheet, but that's it. Also should I be doing this with a button?
Code: Sub SearchForString() Dim LSearchRow As Integer Dim LCopyToRow As Integer
