Replace A Constant With A Variable In An Array Formula.
Oct 1, 2007
I have the following array function that I am trying to get to work properly:
ActiveCell.FormulaArray = "=SUM(IF(NCR!O2:O100=39326,NCR!Q2:Q100,0))"
39326 is the value of 9/1/2007, and this formula works properly.
I am looking for a way to use this formula but replace 39326 with whatever date is in the first row of the same column as the active cell when it is run.
That is, if the macro was run with cell B8 as the active cell, "39326" would be replaced with whatever value was in cell B1.
View 9 Replies
ADVERTISEMENT
Mar 15, 2013
My current dataset goes to row 256, when I use the Macro Recorder it produces the following "static" code.
ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _
"claim_export!R1C1:R256C23", Version:=xlPivotTableVersion12). _
CreatePivotTable TableDestination:="Sheet5!R3C1", TableName:="PivotTable1" _
, DefaultVersion:=xlPivotTableVersion12
QUESTION/PROBLEM:
Each month the amount of rows could be different (columns should be the same)... I have tried (3) different ways to replace the 256 with my variable name called "numbers"
SourceData:="claim_export!R1C1:R " & numbers & "C23" OR
SourceData:="claim_export!R1C1:R[" & numbers & "]C[23]" OR
SourceData:="claim_export!R1C1:R[" & numbers & "]C23
They all produce the same resulting error:
Run-time error '5': Invalid procedure call or argument.
Note* I am sure my variable is working, because when I "step into" (F8) my code and hover over my variable I can see it showing the number I expect.
View 1 Replies
View Related
Jan 8, 2012
I try to adjust chart range using variable value instead of constant value.
My current code :
ActiveSheet.ChartObjects("Chart 4").Activate
ActiveChart.SeriesCollection(1).Values = "='Check_2G'!$Z$2:$Z$32"
I need to make range ( "='Check_2G'!$Z$2:$Z$32" ) adjestable with varible like m instead of 32 in previous code.
View 2 Replies
View Related
Apr 10, 2007
when i am doing the coding
may i know if there is a way to replace the cell address $A9 below: ...
View 3 Replies
View Related
Jul 24, 2009
Is it possible to use a contstant array in Excel VBA? I have tried several differnt ways to declare it, but the VBA editor keeps yelling at me. The following did not work:
View 2 Replies
View Related
Apr 14, 2009
I want to basically set a varible that can be called back into a multiple of documents I will try and explain this as best as I can but it is a fortnightly pay date... i.e. 22/04/2009 Wednesday... as the payroll is fortnightly I want to be able to use the current date or todays date in a future proof macro.
i.e. if todays date is the 14/04/09 then the next pay date has to be the 22/04/09, if this was run in two weeks it would be 06/05/2009.
I was thinking a long the lines of lock in one start date... 14/01/09, then adding increments of 14 days until todays date - variable + 14 * r = "-"
View 9 Replies
View Related
Jun 30, 2006
i need to replicate what i did using array formulas with VBA macro (array variable). to make things clear and simple i created an example for illustration only. look at it & u will find what i did & what i need to do ,much of it
in writing so that i accurately describe my problem. attached is my example
View 4 Replies
View Related
Jul 30, 2008
I've never had to venture into Arrays as there was no need.
I'm now faced with Arrays.
Generally I'm able to figure things out, in this case I'm stumped.
What I have is a Constant Array, that output the amount of Rows the Array displayed in.
I know the information is there, what I don't know is how to extend the rows.
ie it Outputs 5 Rows right now, with a top row header.
What I want is 10 rows with a header.
View 9 Replies
View Related
Nov 18, 2008
assume we have constant P = 100, K=50 and F=10.
I would like to "lock" these cells, and have a variable which could adjust and this variable would multiplicate each one and put out the number.
For example:
P = 100
K = 50
F = 10
Variable: 10 this would generate a sum of:
P = 1000
K = 50
F = 10
View 3 Replies
View Related
Jul 17, 2008
Is it possible to make an named array constant from named constants to use in a lookup?
Eg
I have defined the following constants in Names:
Text1 = "AAAAAAAAAA"
Text2 = "BBBBBBBBBBB"
Num1 = "1234567890"
Num2 = "0987654321"
And would like to make the following array constant in Names:
Arr = {Text1,Num1;Text2,Num2}
However, it does not work.
I am using Excel 2007 by the way and the above values are made up.
View 9 Replies
View Related
Aug 26, 2008
I need to convert a cell that has a list of values A1 = 1,2,3. To a range expression {1;2;3}. I want to do this with a formula and not VBA. Example: Cell D1 has the formula = SUMPRODUCT(COUNTIF(C30:C31,A30:A32),B30:B32). I want to put the list range from column C into one cell.
ABCD
110140
2203
3305
450
560
View 4 Replies
View Related
Mar 3, 2014
I'm looking to loop a comparison code. I'm using dynamic referencing (using x and y) to find maximum values for specific time intervals. The code works on a cell to cell basis, meaning if I input the formula and change the cell referencing manually then the equation will give the desired results. However when I attempted to create a VBA code to speed up the process I kept getting a 1004 Unable to set FormulaArray Property of the Range Class error, I later figured out that the Formula Array function is limited to a certain number of characters so I split up my function into 3 different string formulas. I still get the same error.
[Code] ............
View 1 Replies
View Related
Oct 22, 2013
I have goal table on table A and i want it data fill to tabel B with constant sum. maybe like sudoku in sum right and sum down.
View 1 Replies
View Related
Jun 20, 2008
I try to understand what the syntax is to create and use an array named constant which would be composed of other constant.
Example :
Constant called AvgZone1 which is =AVERAGE(zone1)
Constant called AvgZone2 which is =AVERAGE(zone2)
and then create a named array constant based on the names : =AvgZone1,AvgZone2
is not working. You cannot for example do a SUM().
View 9 Replies
View Related
Jun 7, 2014
I have 800+ files the problem is that the file name ends in 80 different combination so I need to try all of those for each file.
eg: one of the 800 is "109 st no 103 av" the file could be called:
"109 st no 103 av nb1_cleaned.xls" or
"109 st no 103 av nb 1_cleaned.xls" or
"109 st no 103 av nb 1._cleaned.xls" or
"109 st no 103 av sb1_cleaned.xls"
.
.
.
.etc
I wrote a code to try all those combinations, the issue lies a space the code adds before _cleaned, how to remove it?.
So the name should be
"109 st no 103 av nb1_cleaned.xls"
but my code is letting it be
109 st no 103 av nb1 _cleaned.xls
Where the variable Ord is the "1" after nb.
Find the code below:
[Code] ....
View 2 Replies
View Related
Jul 30, 2009
I have data from 100 trials. Each trial has a variable number of data points (rows), but each row is labeled in the first column with the trial number. I would like a macro to identify the first row of each trial, calculate the difference of the value of the cell in column G of that row from a constant (718), and then add that difference to that cell and all other cells in that column of that trial.
So based on the attached sample, I would like all values in column G for trial 2 to be +1, for trial 3 to be -5, and for trial 4 to be +2.
In the file, I've cleared all the data from the impertinent columns. Eventually, I will also want to perform a similar process on column H but with a different constant.
View 2 Replies
View Related
Jan 7, 2009
I am running an array formula which is working fine except that I now need to add a further condition: that a one of a number of values in cells C1:C8 is found in range $a1:$A500. I've tried Or with comma separation and with * separations but nothing seems to work.
Can anyone advise me of the syntax?
View 9 Replies
View Related
Mar 14, 2012
Is it at all possible to refer to a array that may change in a formula?
For example I need to use a Vlookup formula, however the table array will change depending on the value of another cell.
I need the user to be able to select the column heading that the lookup should work off from a drop down list. So if the user selects column heading C, the array should start from column C though it will always end at column Z. If the user selects column heading Y the array would be Y:Z.
View 7 Replies
View Related
Nov 30, 2008
I'm trying to use arrays in a macro!
Here's my
Sub ArrayTest()
'
' ArrayTest Macro
'
Dim Array1() As Variant, Array2() As Variant
Dim R As Integer, ilR1 As Integer, iLR2 As Integer
ilR1 = Cells(Rows.Count, 1).End(xlUp).Row
iLR2 = Cells(Rows.Count, 7).End(xlUp).Row
ReDim Array1(1 To ilR1)
ReDim Array2(1 To iLR2)
For R = 1 To ilR1
Array1(R) = Cells(R, 1) & Cells(R, 2) & Cells(R, 3)
Next R
For R = 1 To iLR2
Array2(R) = Cells(R, 7) & Cells(R, 8) & Cells(R, 9)
Next R
For R = 2 To UBound(Array1)
If WorksheetFunction.CountIf(?????, Array1(R)) > 0 Then Cells(R, 4) = "old" Else Cells(R, 4) = "new"
Next R
'
End Sub
Basically, the macro concatenates the content of three columns from two different tables into two arrays. Array1 contains the current stuff and Array2, the old one. If I CountIf items from Array1 into the content of Array2, I should get what's new (count 0).
Now, ? in the code should refer to the content of Array2. How do I do that?
The errors I get are 424 object required [Array(iLR2)], 1004 method 'Range' of object '_Global' failed [Range(Array2) or Range(Array2(2), Array2(iLR2))], or type mismatched [Array2].
View 9 Replies
View Related
Dec 11, 2007
I'm working on a project in Excel (for a restauraunt) and I basically need to make a formula to work out what an item is, using it's ID number and referencing the certain menu that it is in.
as you can see the table array is defined in cell E3, but i still get a #N/A result, and when I replace the "E3" in the formula with "Deserts" it produces a result.
View 9 Replies
View Related
May 8, 2012
I have a userForm (Form1) that contains a persons name that I would like to reference in a separate UserForm (Form2). In the separate UserForm (Form2) I need to reference this persons name many times, so I was wondering if there was a was to declare this name in the separate UserForm (Form2) as a constant. Only thing is that a constant, to the best of my knowledge, must be an expression and not a variable. Mainly, I'm trying to avoid declaring the myName variable in each Sub within Form2, which it will be needed for a ton of Sub's.
Code for Form2: Const myName As String = Form1.txtName.Value
View 5 Replies
View Related
Feb 19, 2010
I am trying to write a macro which will autofill specific columns. The macro will set the range from the start of my autofill to the end of my autofill as a constant range.
The problem I need to get around is the end of my range can always change each time I run the macro. For instance, the first time I run the macro I may only need to autofill from row 4 to row 15. The next time, I may only need to autofill from row 4 to 23 (because of user updates). How can I make the end of my range not be a constant address but variable?
View 6 Replies
View Related
Oct 6, 2011
If I have a formula that I want to copy throughout a column, but I want to keep one of the parts of the formula constant, is there a short way to do this?
For example:
First cell is A1*O24
Second Cell is A2*O24
Third Cell is A3*O24
Right now when I try to copy the formulas, the second cell always reverts to A2*O25, which is not correct.
View 2 Replies
View Related
Nov 17, 2006
In cell A1 exists data. In cell A2, I would like to test A1 to determine if A1 is a formula or a constant.
Examples:
=A9+3 would result "formula"
="1+3 would result "formula"
3 would result "constant"
'Blahblah would result "constant".
View 9 Replies
View Related
May 2, 2013
I'm only starting to get to grips with arrays. I have what I consider to be a lot of data that I need to 'cut' into separate workbooks. I have written some code that does this by simply looping through each line, 250k+, checking against a variable and copying the row into a separate sheet. This took longer than it would have doing it manually. It was suggested to me that I use arrays to speed up the process. I have managed to store the test data into an array but am struggling to find a way to loop through and pull out an entire 'row' from the array based on a variable. I have looked for 2 days in various places to find some way to loop through the data held in the array, but to no avail.
That code will appear here from about 8am GMT tomorrow. I know that once I've cracked this I'm on the road to some very significant time saving and comprehensive report writing.
View 9 Replies
View Related
Dec 4, 2007
I need an equation that lets me determine whether a cell contains a static constant value (either a string or a number), or an equation that generates a value.
Problem: I have a cell that contains a default equation that generates a default value, depending on a few conditions. The user can overwrite this cell with a constant. In another cell I need to know whether that cell is still the default equation or a new constant value.
I cannot simply test the value of the contents to see if they match my default, because the user may choose to enter that value.
View 9 Replies
View Related
Jan 1, 2006
I am creating a data tracking workbook. Information is entered into cells on
different sheets, then the tallies are pulled to one easier to read sheet.
In creating the tally sheet, I am setting the cell formulas. The cells
referred to are constant, only the sheet referred to changes. For example,
the cell might read
='FP 1'!$I$25
and the next one should read
='FP 2'!$I$25
....and so on. I would like to be able to paste the formula and have the
referred to sheet change so that I do not have to go through and make
hundreds of little changes.
View 10 Replies
View Related
Jan 3, 2008
I am creating on the fly an array (2 columns) in which the one row cell is mathematically derived from its neighbor (A left-hand cell). However, when the mathematically derived product exceeds a value, the row neighbor changes to another constant until its neighbor's product exceeds another value, etc. Can I create such an array without resorting to VBA?
View 9 Replies
View Related
Feb 25, 2009
I have used the following long but simple formula.
=SUM((B17*B14)+(C17*C14)+(D17*D14)+(E17*E14)+(F17*F14)+(G17*G14)+(H17*H14)+(I17*I14)+(J17*J14)+(K17* K14)+(L17*L14)+(M17*M14)+(N17*N14)+(O17*O14))
I need to copy it to numerous other cells. However I need the row fourteen values to remain the same while the other values change according to which row I'm copying it to e.g
=SUM((B20*B14)+(C20*C14)+(D20*D14)+(E20*E14)+(F20*F14)+(G20*G14)+(H20*H14)+(I20*I14)+(J20*J14)+(K20* K14)+(L20*L14)+(M20*M14)+(N20*N14)+(O20*O14))
Is there any way of doing this without changing the formula manually every time?
View 3 Replies
View Related
Jan 28, 2013
I have a template with formulas calculating a default value, but still allowing the user to override the cells with direct input.
I want to use conditional formatting to highlight any cells that have been overwritten, but can't find a way for Excel to differentiate between a cell with a formula or an inputted constant.
I realize there is a VBA "isFormula" function, but I don't want to have to use VBA for this.
View 7 Replies
View Related
