Pasting Values From One Sheet To Another And Continue Adding It

Nov 9, 2013

I have values printed between from c5:c14 ( not always all 10 will be filled up. sometimes can be 1 also). Wanted some code or method where any value in this gets pasted in the second sheet from A1 onwards. Also whatever number of times I paste it keeps on adding one below the other in the A column in the second sheet . Important : If there are blank cells between one value and other in the working sheet, then it should eliminate the blank space and paste it in sequence in the second sheet. i.e if there are values in c5 , c8 , c14. Then when pasting in the second sheet it will be in A1,A2,A3.

View 3 Replies


ADVERTISEMENT

Continue Adding The Numbers Even If In One Cell Got An Error Value

Aug 30, 2009

how can i continue adding the numbers even if in one cell got an error value. Sample:

a1=5
a2=5
a3=#div/0! (this could be #name!, #value!, etc.)
=sum(a1:a3) returns #div/0! but i want it to return as 10. any clarification n how to do this?

View 3 Replies View Related

Pasting Values Into Cells Without Pasting Over Existing Values

Feb 9, 2010

For simplicity sake if I wanted to paste the letter A in to a cell that already had the letter B in it to make the cell read AB how could I achieve this?

View 10 Replies View Related

Save Sheet Then Continue From Active Workbook?

May 5, 2014

I got a workbook with a database in sheet1. I filter that database and copy - paste values the results to a new sheet. Next, I save that new sheet to somewhere on my drive. The thing is that I want to go back to my original database, and continue filtering. But that workbook is no longer the "active workbook". This is how it works:

sub DifferentClients()
For Each FieldWorkBy In Array("Client1, Client2,...")
MyDatabase.AutoFilter Field:=CountryCode, Criteria1:=Array( _

[Code]....

View 3 Replies View Related

Delete Sheet If A2 Is Blank And Then Continue MACRO

Nov 20, 2007

I have been able to put together a pretty hefty MACRO. I found out that some of the files I am importing may result in no data due to the manipulations I am doing. This causes a problem when I try to subtotal the data on each sheet. Is there a way to have the MACRO delete a sheet if cell a2 is blank and then continuw with the rest of the MACRO?

View 9 Replies View Related

Returning Match And Adding Values On Multiple Worksheets To A Master Sheet?

Aug 4, 2012

how I can keep a running total of information added to a different worksheetS. They would not always be the same peson ID so I would like to return a match on any unique ID number found on multiple worksheets and add their values on a master front sheet. i.e this becomes a running total of items purchased per ID number.

View 4 Replies View Related

Calculating Total Time In One Sheet And Pasting Results Automatically In Another Sheet

Apr 21, 2014

I have an excel workbook which requires us to enter the log details of some sites and then a report is generated using these logs (report attached) . [URL] .......

I want that excel should automatically identify the site and calculate its outage with the following formula:

Outage %age= Total Outage(min)/100.80
and add it in the respective column while identifying the outage.

e.g. if outage is of power then the calculated %age outage should be pasted in the power outage column in front of the respected site.

e.g. in the sheet attached above the first row in the first sheet states that SKU2326 was down for 50 mins

Now %age outage will be
Outage %age= 50/100.80
Outage %age=0.496

Now as the outage is related to power so this outage should go into power column in sheet number 3 labelled as "Network Total Up time Week#17"

Now the next time SKU2326 becomes down it should be added with this 50 mins and the outage calculated as presented above.

View 1 Replies View Related

Pasting Data On First Blank Sheet On A Sheet

Jun 19, 2012

I have several sheets with one master sheet. I have a trigger on each sheets that manipulates the data on that particular sheet. Here is the code I'm using:

Code:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim r As Range
Dim cell As Range

Set r = Intersect(Target, Range("A:A"))

[Code] .....

Now the point where i put new code is where i want the information from that particular row, column a thru column m to be special pasted linked to the first blank row from the top down to be pasted starting over from Column B. so A1 would be pasted on B1. I ran the recorder and got this as the code ActiveSheet.

Paste Link:=True so i do i incorporate what i want.

View 2 Replies View Related

Copying Sheet Data And Pasting It To A New Sheet

Jun 28, 2006

I have multiple worksheets and I am looking to take specific information from those worksheets and paste them into a new one, thereby compiling the information.
The "C" column is populated with certain cells that say "Not Acceptable". This varies from sheet to sheet, but all in the C column. I'm looking for a code that will run through all the sheets, find the cells that say "Not Acceptable", copy that row of information it is in, and paste it onto a specific sheet that we'll call "Summary"

View 4 Replies View Related

Pasting The Sum Of Two Cells From One Sheet To One Cell In A Different Sheet

Nov 10, 2006

I'm trying to write very simple code that copies totals from one worksheet and pastes to a different worksheet. Normally, it is a one cell to one cell copy/paste. For instance, I want to copy the total found in cell "C4" in Worksheet "BalanceSheet" and paste it into cell "C14" in Worksheet "SpreadFinancials." I'm able to do this fine, and the code below is what I've been using.

Occasionally though I'm needing to sum up 2 cells in Worksheet "BalanceSheet" and only copy/paste the summed total into one cell in Worksheet "SpreadFinancials". For instance, I want to sum the totals found in cell C8 and C9 in Worksheet "BalanceSheet" and then paste that summed total into cell "C8" in Worksheet "SpreadFinancials". I'm looking for simple code that does this. Here's an example of what I've been doing so far for one cell to one cell copy/pastes:

Sub PopulateFinancials()
Sheets("BalanceSheet").Range("C4").Copy Sheets("SpreadFinancials").Range("C14")
Sheets("BalanceSheet").Range("D4").Copy Sheets("SpreadFinancials").Range("E14")
Sheets("BalanceSheet").Range("E4").Copy Sheets("SpreadFinancials").Range("G14")
End Sub

View 4 Replies View Related

Adding Values In Cells (stops Adding After Row 14)

Oct 1, 2009

I am trying to add numbers from cells if it IsNumeric and for some reason in column K the macro doesnt recognize numbers after row 14?

The range column is "E4:E"
Search criteria is the letter "R" in column "E" Then using OffSet, I go thru other columns and process data. Most of the macro works except for column K after row 14?

View 5 Replies View Related

Pasting Data Onto Sheet

Feb 1, 2009

I am using 'Dim' to define a string for SheetName, a variable.

I have tried with no success various ways to try and paste data to a sheet with this variable.
I know the variable is correct as I am using it to make a new sheet then rename it and also move it.

View 9 Replies View Related

Copy And Pasting Onto Another Sheet

Jul 27, 2006

I need a macro which goes thru the columns A to K, picks up the value in the filled cells and paste them all in 1 column on another sheet, like sheet2 A1 onwards. Attached is an example of the file.

View 8 Replies View Related

Pasting Values In A List Already Filtered?

Mar 8, 2013

I would like to paste values from a list into a different list - different tab - that is already filtered. When I try to do so, the values will paste into the hidden cells - being filtered -.

Find attached an easy example of my problem. The list I am talking about is around 1,000 lines.

Pasting Example.xlsx

To explain my example, I filter sheet 1 so only item I need are showing - B, D and F in this case - and I would like to paste the value of Alarm 3 from the Sheet 2 to the corresponding line in sheet 1. But it does not really work - line F is not filled - and when I un-filter values are filled into Item C and D.

View 3 Replies View Related

Code Is Pasting Formulas Instead Of Values

Jul 10, 2014

I am trying to copy data from an employee worksheet into a database that tracks the history of that data when they click submit. Everything is working well, except I can't figure out how to change the code to copy and paste values instead of the formulas.

View 2 Replies View Related

Pasting Values Below Target Cell

Dec 27, 2011

Objective:
* I want to copy a range that starts at 1 cell immediately to the right of AddressStart and extends for 100 cells wide
* I want to paste 10 rows of this information
* AddressStart will be a variable address such as B2, B10, B1000

Here is my current code (which fails on copy/paste):

Code:
For NewRows = 1 To 10
WSReqs.Range(AddressStart).Offset(NewRows, 0).EntireRow.Insert
WSReqs.Range(AddressStart, Cells(0, 100)).Offset(0, 1).Copy Destination:=WSReqs.Range(AddressStart, Cells(0, 100)).Offset(NewRows, 0)
Next NewRows

Questions:
1) How do I set the relative reference to set the size of width of the row to be pasted?
2) Is it possible to refer to the end of the row (far right)

View 4 Replies View Related

Pasting Values With Merged Cells

Dec 10, 2013

I did the following, and get an error message, that itself seems erroneous.

Steps:
In the source sheet, i selected A9:G9, copied.
In the destination sheet, I selected A9:G9, and then "paste formatting"
In the source range, I selected the same cells, A9:G9, and copy
In the destination sheet, I selected A9:G9, and "paste values"

But, at "paste values" two error alerts come up (and the operation fails):

"The operation requires the merged cells to be the identical size"
"The information cannot be pasted because the copy area and the paste area are not the same size and shape"

Within the range, cells C9:D9 are merged. On the destination sheet, before i try to paste values, the cells that I am pasting into appear to be identically merged, if you just arrow by them, the cell highlighted is merged, and "Merge and Center" is highlighted in the ribbon.

So, I do not understand why i cannot paste in this case, since it would all appear to match up properly.

Upon further investigation, it appears that i cannot "paste values" with any cells along with the merged cell, in the same operation. If I only paste the merged cell alone, with "paste values" it works. But, if i add even one cell on either side, it fails in the same way, even though the selected paste region exactly matches the selected source region, in terms of what cell is merged.

View 4 Replies View Related

Condensing Worksheets And Pasting Values

Feb 7, 2007

I have a pretty slick macro that once ran will save the spreadsheet and copy the input to a master sheet, so far it is very functional. I borrowed most of the code from within this forum, as VBA is not my strong point. My problem being that when the script runs and posts the output to the master sheet, it is pasting formulas. I need it to strictly paste the values in, otherwise my master sheet is referencing hundreds of other worksheets.

Sub Finished()
Dim iReply As Integer
Dim countColumn As Integer
Dim MyFullName As String
MyFullName = ThisWorkbook. Name
iReply = MsgBox(Prompt:="This will upload your tracker and exit, Are you sure?", _
Buttons:=vbYesNo, Title:="")

If iReply = vbYes Then
'If Yes Do This

Application.DisplayAlerts = False...................

View 2 Replies View Related

Copy And Pasting From Only One Sheet From Excel To PPT

May 12, 2014

I am using the following code to paste an excel generated chart into ppt. How do I adapt it such that it only pastes the charts from sheet2 and not the entire workbook?

[Code] .....

View 11 Replies View Related

Copying And Pasting In Hidden Sheet?

Aug 14, 2012

I have the following code (which works fine when the sheet isn't hidden)

Code:
FinalRow2 = TtlRev.Cells(Rows.Count, 1).End(xlUp).Row
TtlRev.Range("AM6:AO6").Copy
TtlRev.Range(Cells(6, 39), Cells(FinalRow2, 41)).Select
ActiveSheet.Paste

However, I need to hide the sheet, but it doesn't work because you can't use .select on a hidden sheet I believe. Any way of doing this to a hidden sheet?

View 4 Replies View Related

Error While Pasting Data Into Another Sheet

Jan 10, 2014

I am trying to create a macro that will take inputs entered into a range of cells in 1 worksheet and then paste it into another range on another sheet. The target range is selected based on a condition and once the values have been pasted then the target range should be locked.

I have been trying the following code but keep getting the Run-time error 1004 telling me that the PasteSpecial method of range class has failed. Can some one explain what I may be doing incorrectly?

Code:

Dim i As String
i = Range("Month").Value

Select Case i

Case "January"
Sheets("INPUT SHEET").Select
Range("Input_In").Select
Selection.Copy

[Code] .........

View 1 Replies View Related

Working With Duplicates When Pasting To Another Sheet

Jul 3, 2008

if anyone has some vba code that can help with keeping latest duplicates when pasting to another worksheet.

Basically, I have a worksheet with YTD data and another worksheet with data for the current month. I need to paste the data from the Month to the YTD sheet. However, if the data (a reference number in column A) already exists, the row from the Month data should be pasted over the duplicate in the YTD sheet, and if it doesn't exists, it should paste it as a new row.

At the moment I'm just copying the whole lot to the YTD sheet and then try to remove duplicates, however, once it's pasted, I don't know which ones to remove.....

View 9 Replies View Related

Copying Row Information And Pasting Onto New Sheet

Jul 22, 2006

I just need a code that will copy items in a row from column A:F...

View 5 Replies View Related

Looping Through And Cutting / Pasting Values Between Two Dates

Jun 17, 2014

I am trying to cut all rows with the date less than 2 days older than the current date. Cut and paste it into a new worksheet in same workbook and save it into a specific folder.

[Code] ....

I am getting an error on the line :

[Code] .....

Saying Object doesn't support this property or method.

View 9 Replies View Related

Pasting Entire Row To New Sheet If Cell Contains Certain Text?

Jun 29, 2014

I am looking at trying to develop a workbook for my job that would make things alot more efficient.

Firstly, I download data from a web based app into excel. I now want to take certain full rows and paste them into another sheet depending if they have certain text in a cell. So i want to search the entire coloumn for a value of "OR" and if this is present copy the entire row into a new sheet ?

View 14 Replies View Related

Searching For String In Column And Pasting Into New Sheet?

Jul 16, 2014

I need to figure out a way to search for a string in column D and then paste the entire row that string is in to a new sheet. I'd like for this to continue until I paste all of the rows of that string into the next sheet. This is what I got so far, and when I run it, it says an error occurs and then it says either press enter or paste. After I hit enter, it pastes the first row to the next sheet, but that's it. Also should I be doing this with a button?

Code:
Sub SearchForString()
Dim LSearchRow As Integer
Dim LCopyToRow As Integer

[Code]....

View 3 Replies View Related

Copy And Pasting A Dynamic Range From One Sheet To Another?

Aug 5, 2014

I'm trying to copy a range of column headers from one worksheet and paste them in another using a macro
The source range starts at Q1 and runs along row 1 for a variable number of columns each time.The destination cells start at B1 and will run along row 1 for the same number of columns.

I've got as far as counting the number of source columns

PHP Code: 

Dim LastDate As Long

LastDate = Sheets("Edited data").cells(1, Columns.Count).End(xlToLeft).Column 

how to paste to a changing number of columns

PHP Code: 

 Sheets("Edited data").Range("Q1", cells(1, LastDate)).copy Destination:=Sheets("Variety Total").Range("B1", ????) 

View 2 Replies View Related

Grouping Objects Then Copying And Pasting Onto Another Sheet

Dec 18, 2008

doesnt work when recording a macro because the group name changes each time I group the pictures (visios) and the picture names change depending on what is on the sheet at the time.

Is there a way to group every picture on a sheet1 (excluding macro buttons), then copy them to sheet 2?

View 14 Replies View Related

Pasting Constant Formula Where Referral Sheet Changes

Jan 1, 2006

I am creating a data tracking workbook. Information is entered into cells on
different sheets, then the tallies are pulled to one easier to read sheet.

In creating the tally sheet, I am setting the cell formulas. The cells
referred to are constant, only the sheet referred to changes. For example,
the cell might read

='FP 1'!$I$25

and the next one should read

='FP 2'!$I$25

....and so on. I would like to be able to paste the formula and have the
referred to sheet change so that I do not have to go through and make
hundreds of little changes.

View 10 Replies View Related

Copy And Pasting One Sheet Under Another For X Number Of Sheets

Sep 27, 2013

Code:
Sub Copy_and_Layout()

Dim ws As Worksheet
ThisWorkbook.Activate
For Each ws In ActiveWorkbook.Worksheets
ws.Activate
If Left(ws.Name, 5) = "Sheet" Then
Range("B2:G" & ws.UsedRange.Rows.count).Copy
Sheets("Rev New").Range("B1").Insert xlDown
End If
Next ws
End Sub

So far I have this as a code but it seems to only paste the last sheet at the top ....

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved