I want to select the dates(from column H) in which the value(in column I) is greater than zero and paste them in column K(Attachment). At the same time, I want to expand each day for 24 hours. That means, I want to repeat the date 24 times while pasting in column K.
View 5 Repliesok is there a way to have excel fill a certain number of cells with specific data specified X times? For example, the end result would look something like the pic below. The column on the right would change according to the numbers specified in the yellow column.
View 9 Replies View RelatedI am trying to create a formula that would provide a result a specific number of times based on a table in a seperate worksheet. Here is an example:
Person: # of times
John 2
Joe 2
Frank 2
Jack 1
Based on an IF statement, the cell should bring back John, the next cell down should bring back John, the third cell should bring back Joe as John has reached his limit of 2, and have this repeat until all criteria that meet the IF statement have been met.
I am coding a macro that would take all information needed from an existing pivot to put in in a new report file.
Now the problem is that I couldn t get to paste the data (for some weird reason), so I did a loop that terminates with IsEmpty...
My problem is I have to write on loop per column, because I don t know how to tell excel to go to next column (that I know!) AND to the first row, which means doing an offset of (x,1), but how do you set the x for it to be adaptable if I change the length of the pivot table?
I really hope someone can help me with this, I tried to replace range("first cell") by cell(x,... and set x as a variable but i am not good enough obviously....
Here is what I have so far:
Dim k
Dim w As Integer
Workbooks.Add
ActiveWorkbook.SaveAs "C:Dokumente und EinstellungenCustomerServiceDesktopMonthlyReportAutomated.xls"
'iniatiation before loop
Workbooks("ChannelProductionlastestupdateJAN2007").Sheets("pivot").Activate
Workbooks("ChannelProductionlastestupdateJAN2007").Sheets("pivot").Range("a20").Select
k = Selection
I have a form that users will fill in, and I need to print a set number of labels (all identical) based on the info that is entered.
I have the form set up with data validation and indirect references(Lists on a separate sheet)
Example...
User enters in:
Customer name
Product name
Lot #
PO#
Date made
Number of items
From there I have a separate set of cells that reference the above info formated to how I want the label to appear when printed.
Now, I need to repeat that label the set number of times (# entered in as "number if items") in a label sort of format (not sure if a mail merge will work for this??)
Then, print off and stick identical labels onto each part that is manufactured per PO/Date etc.
I want to paste into cell A1 of Sheet1, but without selecting that cell first. This code works, but it selects the cell:
Range("A1").Select
Sheet1.Paste Range("A1")
I've tried different variations such as:
Sheet1.Range("A1").Paste Range("A1")
or
Sheet1.Range("A1").Paste
but they result in errors.
1. I need to paste data that is copied from an internet window into sheet1 without selecting the cell so that I can continue working on a data in sheet5. The macro prevents me from editing sheet5 in an orderly fashion because when it goes to paste the data into sheet1 it selects the cell in sheet1 interupting what I am trying to manually do with the data in sheet5. How to paste data into a cell withou selecting the cell so that my program stops interupting what I am doing in a different sheet?
2. My macro is meant for real-time defect monitoring in a production facility. The macro opens an IE window that contains the defect occurences, copies the data, pastes it in sheet 1 then sheets2 and 3 analyze the data, closes the IE window, and then waits for a time period before repeating the process. This macro is so slow though that it is hard to work on this file while the macro is running. How to run the macro in the background and speed it up so that I can continue working on Sheet5 of the file while the macro repeats itself over and over again? Here is my code.
The variable website is determined by earlier parts of the code that direct the macro to a specific network website.
Sub Half_Hour_Data
1
'Open Internet Window and Navigate to Website
Set myIE = CreateObject("InternetExplorer.Application")
myIE.Navigate Website
myIE.Visible = True
Application.Wait Now + TimeSerial(0, 0, 10) needed to wait until the page loads
[code]....
Is there a way to speed up the macro by removing the timeserials and just telling it to continue when the task is complete. Then run the whole thing in the background so I can work on another sheet while this program runs?
sorting data I use in a workbook for athletics. I've really chopped down my workbook for upload, In the worksheet "Leaderboard" I can call up stats for different lifts, and it finds (in this case) the top 5 lifts and the names for the kids that have those corresponding lifts.
My problem is that when two or more kids have the same lift, it will only call up the name of the first instance of that lift. You can see this in the "Leaderboard" worksheet, and the name "Adams, Andrew" appears for both lifts of 75. I would appreciate any help on how to correct this, as I've searched the Internet for weeks now looking for a solution. I've tried experimenting with different things as well, all to no avail.
I am trying to cut all rows with the date less than 2 days older than the current date. Cut and paste it into a new worksheet in same workbook and save it into a specific folder.
[Code] ....
I am getting an error on the line :
[Code] .....
Saying Object doesn't support this property or method.
I'm having some trouble with copying dates from certain worksheets into new worksheets. When the data is pasted into the new worksheet, the date changes by four years. Somehow, the process of copying and pasting is reducing the serial number by 1462 units (days).
I'm not sure whether this is a bug or a security restriction to prevent copyright breaches. There's a way of getting around it, but I'm curious as to why this is happening. The dates copy and paste correctly into the existing worksheet, but not a new one. An example is attached and the dates are in columns C & D.
I need a macro that will, (i) make a copy of the current sheet, (ii) let the user select the month to be selected from a list (Message box), then (iii) delete all other columns in the sheet that is not from the selected month and then, (iv) total the data of the selected month in the empty cell on the right.
The sheet contains data in the following way:
Column A = Description of data in rows
Column B to IV = in each column is a specifics day data
Row 1 = Branch Name
Row 2 = the date in the format 2006/05/16 for 16 May 2006
Row 3 – 361 = financial data
I am trying to come up with a macro that selects values from one sheet and inserts them into another sheet. The number of values will change each time based on the user's entry, as well as the number of times that each entry should be pasted.
For example:
Entry: X | Y | Z
Number of Times to be Inserted to New Sheet 3 | 2 | 1
Result:
X X X Y Y Z
I have spent a while trying to figure it out, however the best I can come up with is using an array, but I can only get one value from the array to paste multiple times:
(*Note: In my testing, I didn't insert into new sheet or set up the array to handle different values, I was just trying to get the basic idea to work)
Dim A(1, 3) As Variant
A(1, 1) = Range("C3").Value
A(1, 2) = Range("D3").Value
A(1, 3) = Range("E3").Value
[Code].....
I have a large spreadsheet which has a column of dates (dd-mmm-yyyy) in it. I would like to be able to filter by month regardless of dd and yyyy. I would like to see all quotes in Jun.
View 2 Replies View RelatedI am working with two files everyday: today's and yesterday's. Each report has the day's date in the name of the file.
So I'll take today's (11-5) and import it into yesterday's (11-4). Then, tomorrow I'll take 11-6 and import into 11-5. The day after, I'll take 11-7 and import into 11-6. So on and so forth. I'm trying to figure out how I can get VBA to accommodate these changes in names. So that it sees the date in the name of today's report, sees that it is today's, then selects yesterday's (or says "Open yesterday's report!"), and imports the information.
I can figure out everything else, just not the naming issue.
I guess I could always stipulate to the person running it that they should only have these two workbooks open and that they should run the macro starting in yesterday's workbook. Just writing VBA code to select the only other workbook so VLOOKUP can be done from it. But I am trying to make it fool proof.
I have created a calendar as part of main userform and I need to be able to select 2 dates and link them to 2 cells in the spreadsheet. According to your help on the calendar form at http://www.ozgrid.com/VBA/excel-calendar-dates.htm I managed to do the basic calendar but need to select in it 2 dates.
View 2 Replies View RelatedI have a file with two sheets.
Sheet1 Data are as follows :
Column A : Date (Data is : 31/01/2006,01/02/2006 ...... )
Column B : Name (Data is : ABC , XYZ, ABC .......)
Column C : Time (Format is : HH:MM) (02:00 , 03:00 .....)
Sheet2 Data are as follows :
A1 : Start Date and B1 : End Date
A2 : Name and B2 : Sum of Time
A3 : ABC and B3 : (i Want Result in this cell)
Result is :
I want Result in B3 cell : Name(ABC) of Time sum from sheet1 Column C between Start date(A1) to End Date (B1).
how to multiple dates can be selected using the calendar control object? I haven't actually explored this for very long
View 5 Replies View RelatedIf you have some low time resolution data you need to compare with high time resolution data how do you average the high resolution data. For example data that starts and ends a fortnight apart and you want to compare it with data that starts and ends 1 hour apart you need to average the hourly data to do so. I can't figure out how:
So if I had Sheet 1 with hourly data
A B C D E
1 Date, Time, Measurement
2 01/01/2014, 01:00, 62
3 01/01/2014, 02:00, 38
etc....
Then in Sheet 2, fortnightly data
A B C D E
1 Date on, Time On, Date Off, Time Off, Measurement
2 02/01/14, 15:23, 18/01/2014, 12:25, 52
3 18/01/2014, 12:25, 01/02/2014, 14:19, 34
etc....
I'd want to add a new column of data to average the hourly data so I can use the correl function.
In one column I need dates and every date has to appear 16 times.
So, I need date 2009-06-03 in 16 rows, in next 16 i need next day - 2009-06-04.
I have A1= Date A, B1 = Time A, C1 = Date B, D1 = Time B, E1 = Hours between Date&Time B and Date&Time A
How can I enter a formula that takes the date and times from separate columns and calculates them?
I have a table that I am storing into an array. I have an array FDate where I store a date and another array FTime where I store times.
FDate is formatted as m/dd/yyyy Hh:Mm: Ss
Ftime is formatted as Hh:Mm:Ss
I know in excel that you can add and subtract dates and times. How do you accomplish the same task in VBA?
I'm trying to get excel to calulate the difference using the following format
dd/mm/yyyy hh:mm
dd/mm/yyyy hh:mm
So really I need excell to tell me what the actual difference is between dates
I seem to have the worst luck when it comes to getting dates and times to calculate together. My logic just seems to go straight out the window.
What I am trying to do, the end result, is get a Time Worked (duration) that I have spent on a ticket, and a Total Time, the time a ticket was opened, to the time it was closed.
I guess we can try to do this one step at a time.
The first thing that I would like to know is if there is a way to calculate Date/Time in a MM/DD/YYYY, H:MM format?
IE:
Ticket Opened ...................Ticket Closed
5/16/2008 2:54 PM..............5/19/2008 10:47 AM
Total Time in Days / Hours / Minutes
Right now I have the Date and Time split into separate cells, simply because I couldnt figure out a way to subtract the combined date and time.
I am trying to create a "daily donut" to track how long it has been since I left for my current deployment, and how much time I have left until I return home. I would like to show exactly how many year(s), month(s), day(s), hour(s), minute(s), and second(s) (like 1 year, 4 months, 4 hours, 5 minutes, & 34 seconds not 1.0 year, 0.33 months, etc.) it has been (again, not 3600 seconds, 60 minutes, 1 hour, etc.), and how many I have left. I have spent many hours trying to figure this out, and I have even tried looking through this forum, but I still can't completely figure this out. I was close in figuring out the date differences in the x amount of years, months, and days format, but it wouldn't account for the time. I.E., 06/03/09 05:00:00 AM - 06/01/08 06:00:00 AM, would show 2 days, instead of 1 day (I'm not sure how to incorporate the time yet).
The variables are:
A1 Date I Left For My Deployment in M/DD/YY HH:MM:SS AM/PM
A2 =Now() Function in Same Date & Time Format as A1
A3 = Date I Get Home from My Deployment in Same Date & Time Format as A1
Any ideas or help? And if possible, I would like to be able to do this using excel's built in functions (not excel add-ons, vb, etc.), so that it would work on government computers.
I receive data from a company I deal with that has the date and time of all of my transactions with them listed in an excel worksheet. Only problem is that the date/time that I receive is not in my timezone, which is a bit of a problem for me!
What I want to do is to be able to adjust the date and time shown in the cell forward by 14 hours, so that the data is shown in the timezone that I am currently in. So the end result for the first line of data in the attached file would end up being 2006-08-11,10:28:51 instead of 2006-08-10,20:28:51.
I need to compare dates that include both the date and time of day, to find when the day changes.
I have a large list of dates (also includes the time of day in the same cell). There are specific values in the next column that correspond to that date. Some of the values that are too great and have to be changed. This I have figured out with some help from this forum. When a value is changed I need to add together all the values for the corresponding day, some could be above and some could be below.
I have a spreadsheet that contains dates in column A, the number of rows between each date can vary. Selecting a cell with a date in will activate a checklist in the form of a UserForm.
I am trying to create a macro that will count the number of rows from one cell with a date, to the next cell with a date, and then resize the selection for printing.
So far I have this;
Code:
Sub test()
Application.ScreenUpdating = False
Set InitialCell = ActiveCell
[Code]....
My problem with this code is that when it reselects the InitialCell, the UserForm is reactivated. Is there a way to achieve the same results without having to reselect the InitialCell, and therefore the UserForm wont pop up? I tried adding the Unload UserForm1 line but it doesnt have any affect, the form still pops up.
calculating project completion % based on Project start date and end dates .
View 5 Replies View RelatedIs it possible to seperate this sheet by Time - using column F, anything which is between the hours of 07:00 - 09:00 and 16:00 - 19:00? Response - column I - times up to 60 mins - 61 - 120 mins and over 120 mins
View 5 Replies View RelatedI am having difficulty finding the difference between two times and dates in Excel. I have researched this on Google and tried several formulas but none have worked for me. The format the data is currently in can be seen below:
A1: 1/3/2014 11:00:02.230 B1: 2/7/2014 08:42:37.637
A2: 2/12/2014 07:51:58.663 B2: 2/13/2014 05:36:31.893
(Note all times are military time format)
I want to display the difference in C1 in a format along the lines of "dd hh:mm". The data for seconds and fractions of a second is included in the source data but is not needed in the final results.
If the date and time falls on the same day, I have no trouble doing a simple "B3-A3" to determine the answer. For example:
A3: 2/5/2014 09:56:06.273 B3: 2/5/2014 10:39:51.34
Gives me an answer of: 0:43
Trying to do the same for A1 and B1 gives me this: "03 21:42" when I format it to "dd hh:mm".
Is there a formula that would give me the correct answer in both of these cases?