Pasting Values Below Target Cell
Dec 27, 2011
Objective:
* I want to copy a range that starts at 1 cell immediately to the right of AddressStart and extends for 100 cells wide
* I want to paste 10 rows of this information
* AddressStart will be a variable address such as B2, B10, B1000
Here is my current code (which fails on copy/paste):
Code:
For NewRows = 1 To 10
WSReqs.Range(AddressStart).Offset(NewRows, 0).EntireRow.Insert
WSReqs.Range(AddressStart, Cells(0, 100)).Offset(0, 1).Copy Destination:=WSReqs.Range(AddressStart, Cells(0, 100)).Offset(NewRows, 0)
Next NewRows
Questions:
1) How do I set the relative reference to set the size of width of the row to be pasted?
2) Is it possible to refer to the end of the row (far right)
View 4 Replies
ADVERTISEMENT
Nov 15, 2008
I have a spreadhseet where columns I and J (range from I6 to J300) serve as input cells, off to the right, 23 columns over in AF and AG respectively I have a hidden array formula (Index, match) calculating values based on input in either column I or J and several factors embedded in reference table in the same sheet. That works fine. I want cells in columns I and J to be interdependent, in other words, input in column I drives calculations in a hidden formula and I want the value of that calculaton to display in column J (in a adjacent cell input in I6 results in display in J6), but if I input value in J then this value will drive calculation in a hidden formula and display in I (let's say I is centimeters and J is inches). I have a code that works (I set it up as a try just for few rows) but only one code section at a time, not together. If I choose column I (#9) to go first in code, values update in J, but not the other way around, if I choose column J (#10) to go first in code, values update in I, but not the other way around. What am I doing wrong, I tried Target.address case, I tried Intersect ... is nothing then etc. They all work one at a time but not together. Here is the code as it stands now
View 3 Replies
View Related
Feb 9, 2010
For simplicity sake if I wanted to paste the letter A in to a cell that already had the letter B in it to make the cell read AB how could I achieve this?
View 10 Replies
View Related
Mar 31, 2014
I have browsed for two days looking for material on effecting this. The technique quoted most is watch for undolist for paste & auto fill then undo the change and paste the value again with specific formatting needs. This technique can be implemented in a worksheet_change event handler. The problem that I am facing is that the user can copy and past while my VBA is running. Once it is caught inside my own application class object event handler all that undo stack is already cleared. Therefore I have nothing that tells me if the user has entered the value via a paste action. By the time the value is pasted, all that formatting would have been entered. For example, a value that is interpreted by another workbook as DATE will have my destination formatting changed to DATE as well even though it is designed to be TEXT at design time.
So far I have not been able to think of a scheme to deal with this.
My basic intention is to always ensure the destination cell formatting remains as TEXT. If something is already interpreted as DATE after the paste even if I can convert to TEXT the string will appear totally differently. I have to find a way to paste the whole thing as TEXT in order to keep the string the same. The problem is that there is no intrinsic PASTE event in VBA. Without a method to undo that paste I cannot catch this at all.
View 1 Replies
View Related
Mar 19, 2013
How to copy and paste conditional formatting with our changing the cell values. My first row of data starts in row 4 and here is what I have in D4
If D4 is less than or equal to AA4, AW4, BS4, CO4 then it will highlight D4
Now I want to copy that format and paste it for all rows in column D. The problem I'm having though is when I paste the formula it doesn't change to match the row I'm on. For example, when I paste it in D5 this is what I get
If D5 is less than or equal to AA4, AW4, BS4, CO4 then it will highlight D5
How do I paste it so that it will update to show AA5, AW5, BS5, and CO5. I want to be able to do this for 500 rows.
View 6 Replies
View Related
Apr 24, 2012
I'm trying to sort values in order by how close they are to a target, whether they are above or below the target.
Example:
Target = 24
17
22
25
16
30
Result:
25
22
30
17
16
View 2 Replies
View Related
Sep 1, 2007
i am needing to issue a dos command in excel? basically i need to send a target link to a file. i cant use a hyper link for several reasons, and this is the only way i know how to go about this.
View 2 Replies
View Related
Nov 22, 2008
I have emails automatically being sent based on what is entered in the attendance columns, but now I need emails being sent on what is entered in the comments columns. Because the target range changes, I do not know how to combine them.
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("A11:A50, F11:F50, K11:K50, P11:P50, A55:A94, F55:F94")) Is Nothing Then Exit Sub
If LCase(Target) = "no" Then Call RouteActiveWorkbook(Target.Offset(, 1), Target.Offset(, 2), Target.Offset(, 3))
If LCase(Target) = "ex" Then Call RouteActiveWorkbook2(Target.Offset(, 1), Target.Offset(, 2), Target.Offset(, 3))
End Sub
This code results in two macros based on what it entered. Macro 1...........................
View 9 Replies
View Related
Aug 24, 2014
Data is;
83300 - hypothetical number of times I have fired my gun at target.
43209 - hypothetical number of times I have scored bullseye.
So, my bullseye percentage = 43209/83300, or ~51.87%.
Need formula to determine how many more consecutive bullseyes I need to shoot, in order to achieve 70% ratio.
Since each shot from now on will be a bullseye, both values (hits & shots) will increment together.
View 5 Replies
View Related
Mar 8, 2013
I would like to paste values from a list into a different list - different tab - that is already filtered. When I try to do so, the values will paste into the hidden cells - being filtered -.
Find attached an easy example of my problem. The list I am talking about is around 1,000 lines.
Pasting Example.xlsx
To explain my example, I filter sheet 1 so only item I need are showing - B, D and F in this case - and I would like to paste the value of Alarm 3 from the Sheet 2 to the corresponding line in sheet 1. But it does not really work - line F is not filled - and when I un-filter values are filled into Item C and D.
View 3 Replies
View Related
Jul 10, 2014
I am trying to copy data from an employee worksheet into a database that tracks the history of that data when they click submit. Everything is working well, except I can't figure out how to change the code to copy and paste values instead of the formulas.
View 2 Replies
View Related
Dec 10, 2013
I did the following, and get an error message, that itself seems erroneous.
Steps:
In the source sheet, i selected A9:G9, copied.
In the destination sheet, I selected A9:G9, and then "paste formatting"
In the source range, I selected the same cells, A9:G9, and copy
In the destination sheet, I selected A9:G9, and "paste values"
But, at "paste values" two error alerts come up (and the operation fails):
"The operation requires the merged cells to be the identical size"
"The information cannot be pasted because the copy area and the paste area are not the same size and shape"
Within the range, cells C9:D9 are merged. On the destination sheet, before i try to paste values, the cells that I am pasting into appear to be identically merged, if you just arrow by them, the cell highlighted is merged, and "Merge and Center" is highlighted in the ribbon.
So, I do not understand why i cannot paste in this case, since it would all appear to match up properly.
Upon further investigation, it appears that i cannot "paste values" with any cells along with the merged cell, in the same operation. If I only paste the merged cell alone, with "paste values" it works. But, if i add even one cell on either side, it fails in the same way, even though the selected paste region exactly matches the selected source region, in terms of what cell is merged.
View 4 Replies
View Related
Feb 7, 2007
I have a pretty slick macro that once ran will save the spreadsheet and copy the input to a master sheet, so far it is very functional. I borrowed most of the code from within this forum, as VBA is not my strong point. My problem being that when the script runs and posts the output to the master sheet, it is pasting formulas. I need it to strictly paste the values in, otherwise my master sheet is referencing hundreds of other worksheets.
Sub Finished()
Dim iReply As Integer
Dim countColumn As Integer
Dim MyFullName As String
MyFullName = ThisWorkbook. Name
iReply = MsgBox(Prompt:="This will upload your tracker and exit, Are you sure?", _
Buttons:=vbYesNo, Title:="")
If iReply = vbYes Then
'If Yes Do This
Application.DisplayAlerts = False...................
View 2 Replies
View Related
Nov 9, 2013
I have values printed between from c5:c14 ( not always all 10 will be filled up. sometimes can be 1 also). Wanted some code or method where any value in this gets pasted in the second sheet from A1 onwards. Also whatever number of times I paste it keeps on adding one below the other in the A column in the second sheet . Important : If there are blank cells between one value and other in the working sheet, then it should eliminate the blank space and paste it in sequence in the second sheet. i.e if there are values in c5 , c8 , c14. Then when pasting in the second sheet it will be in A1,A2,A3.
View 3 Replies
View Related
Jun 17, 2014
I am trying to cut all rows with the date less than 2 days older than the current date. Cut and paste it into a new worksheet in same workbook and save it into a specific folder.
[Code] ....
I am getting an error on the line :
[Code] .....
Saying Object doesn't support this property or method.
View 9 Replies
View Related
Jan 30, 2014
Is it possible to add a value to a target cell without VBA Ie I have 3 worksheets and I would like to pull a varying cell value from each sheet to give me cumulative total on another sheet in a single cell.
View 2 Replies
View Related
Mar 25, 2014
I have a simple sub below (CopyData) to copy a cell value (I2) to next unused row in column O. If I run the sub from the VB editor, it runs fine doing exactly what I intend to do.
I've tried several macros to cause this sub to run when the value of cell I2 changes but they all behave the same way. I am initiating worksheet changes using the F9 function key. I2 changes every time I press F9 but the CopyData sub doesn't run.
Below is the latest attempt:
Code:
Sub CopyData()
Range("I2").Copy
Sheets("Calculations").Range("O" & Rows.Count).End(xlUp).Offset(1, 0).PasteSpecial xlPasteValues
End Sub
Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$I$2" Then
Call CopyStuff
End If
End Sub
View 2 Replies
View Related
Jul 4, 2014
I am currently using this Formula to Search a table on sheet 2 (Tabelle2) and copy the date in the relevent cell (Cells) into the correct cell on Sheet 1 (Master Sheet).
[Code] ..........
Used in cells E10:AZ30 and E33:AZ46
This works perfectly and is the formula behind all relevent cells in Sheet 1.
I would like to keep this but to add that it also copies the background color of the cell in Sheet 2 to the cell in sheet 1.
If i can Bring this Formula into VBA and add the color changing part, It must only work on the cells listed above..
View 9 Replies
View Related
May 9, 2013
I have some text out of note pad in the following format
"cat" "dog" "bird" "turtle"
"cat" "dog" "bird" "turtle"
There is several lines like this. I need to copy it out of notepad and paste it into excel where every word in quotes is in its own cell. Right now if I paste it everything goes into cell A1.
I am using excel 2010..
View 4 Replies
View Related
Nov 8, 2013
I recently received an .xls book which I then saved as .xlsx (I'm using 2010). There are just under 8,000 rows and 20 columns. File Size 1MB.
The only formulas in the sheet are the ones in a column which I inserted and copied down for all 8,000 rows. Nothing too complicated: no arrays or anything. The sheet calculates fine.
I am simply trying to copy and paste these formulas as values (into the same cells), though at every attempt Excel crashes. I tried on smaller sets of the column and just got it to work for a few hundred rows, though it struggles with any more than that.
I opened a different workbook of mine, and tried the same operation on twice as many cells containing complicated, lengthy array formulas and the action completed instantly.
There is no Conditional Formatting in the book, no code, no 'last cell' issue, no Named Ranges, no external links.
I have even copied the data to a new workbook, then copied the text of just one of the formulas over into this book, added an equals sign, copied down and recalculated, then tried to paste as values again. Still crashes.
Formula:
=IF(AND(N3>1,ROWS($1:1)<>MATCH(M3,$M$3:$M$7979,0)),"Exact Duplicate","")
is far more resource-hungry than I thought, though if that were the case, wouldn't the issue be during calculation (which, as I said, is fine) and not during a paste attempt? No, it can't be this.
View 1 Replies
View Related
Feb 24, 2009
I'm trying to copy and paste this formula to multiple cells and am having difficulty doing so without everything in the formula changing.. SUMIF(Bankroll!Q14:Q6000,U143,Bankroll!Y14:Y6000)
I only want the U143 to change to U144, U145, etc. Yet when I copy and paste down the sheet it changes the Q14:Q6000 and the Y14:Y6000 values as well. I've been having to go through and paste the formula one line at a time and then manually change the U143 to the current U cell that I want it to represent in order to keep the rest of the values the same. Is there a faster way than this?
View 2 Replies
View Related
Jul 10, 2014
I have a data validation list in col A.
I don't want ppl to be able to paste values in cell - them must either type the data or select from list.
Also - the sheet is protected but col a is open
have tried...without success
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Intersect(Target, Range("A1")) Is Nothing Then
Application.CutCopyMode = True
End If
End Sub
View 9 Replies
View Related
Dec 3, 2012
I have main worksheet (target a) that I am trying to populate data from target(worksheet) b. The data I am trying to get from target b changes every month,(declining balance) based on a new month. So how can I get financial data from different cell each month from "b" into same cell in "a"? (so "A" # would be overwritten in same cell based on new # from "B". I have tried VLookup but can't be doing something correct.
View 2 Replies
View Related
Dec 10, 2011
I need to be able to get the color of my target cell (the target could be in red green or blue - background or foreground color could be used) - I realize this requires the use VBA, which I know nothing about - I want to find the color NOT change it or manipulate it in any way
View 9 Replies
View Related
Feb 6, 2014
I have code that "mostly" works great. I'm copying columns from one sheet to another sheet, but in different columns. I have unique code for each copy/paste. The source is mostly raw data. However, there are a few columns that are formula-based, and I'm having a problem. I've attached my code, and it works, but it takes 20 minutes to complete.
I'm very new to macros, but I think(?) I know enough that a data source with 2,000 rows and 30 columns shouldn't take 20 minutes to complete the macro calculations. All of the columns (copy and paste) in the code are pure data. The only exception is the column labeled "AI". Is there are shortcut, other than creating new columns in the source data sheet and pasting these results as values? I put the specific pieces of code that I'm referencing in bold.
View 3 Replies
View Related
Feb 22, 2010
Every time I think I've got this thing beat, they throw another curve at me!
If cell Q19 is blank, leave target cell blank
If cell Q19 is not blank, return the value of cell E$4
View 2 Replies
View Related
Oct 23, 2011
Copying the target cell to target.offset(0,-3)
View 5 Replies
View Related
Jan 4, 2007
I have a piece of code that does the following:
In Cell A1 if 0 is entered, it puts a diagonal line through the cell
If in Cell A1 anything other than a 0 is entered, then the the diagonal disappears.
I would like however for the code to recognize that if the cell is blank then to put a diagonal line through the cell as opposed to entering a 0. The code is listed below:
*The code below also does what is described above for cell A2*
_______________________________________________________
Private Sub Worksheet_Change(ByVal Target As Range)
Select Case Target.Address
Case "$A$1"
If Target.Value = 0 Then
Target.Select
With Selection.Borders(xlDiagonalUp)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = xlAutomatic
End With
View 9 Replies
View Related
Jan 12, 2009
I'm trying to make up a sheet that will be able to cope with users pasting in data from other sources. I thought simply running a TRIM function on any data entered in the target cell would be enough, but I've realized that many of the "space" looking characters are not really spaces and don't get trimmed. I've searched around here, but can't find a definitive answer... What can I use in VBA to trim anything that isn't a-z or 0-9 from around data that's entered or pasted in?
View 9 Replies
View Related
Apr 7, 2014
I have a table of data (say Column1 to Column 5) with multiple rows.
Column 1 to 4 will have the lookup values in multiple rows and Column 5 data should be picked up using vlookup or other lookup function.
I managed to somehow bring all these lookup values in (Column 1 to 4) in a single column in another sheet. I am now trying to use some lookup or other functions to match this single column and pick column 5 data in original sheet. Result i am expecting is lookup value in first column and next to it column 5 value.
It is basically a lookup wherein lookup value is spread over multiple rows and columns and result column is fixed. I tried using vlookup, but lookup value column and column number had to change every time when i moved from column1 to 4.
View 3 Replies
View Related
