Permanently Highlight Values Chosen From Drop Down
Aug 24, 2007
I am attempting to run a macro that will make conditional formatting I have applied permanent, and then remove the conditional formatting from the cell. My application for this is a master fantasy football cheatsheet, with multiple columns of the same player names ranked in different orders. When a player is drafted I type their name in cell A1, and conditional formatting is setup on so that name (presumably once in each column) will be highlighted/bolded/etc. For example, if I typed "LaDainian Tomlinson" in cell A1, I would be able to find his name in each list/column (from the conditional formatting that will make it stand out), and then run the macro to make this formatting permanent (show he has been drafted), and remove the conditional formatting code, leaving the effects. I found a macro online to do this at the following link, but am having some issues:
When I run the macro on any cells not containing conditional formatting, I get the message: "The formatting based on the conditions in the range (whatever is highlighted) has been made standard for those cells and the conditional formatting has been removed."
This messsage is precisely what I am trying to do, however, when I run the macro on a cell with conditional formatting (when it would actually be beneficial), I get "Run-time error '13' Type Mismatch"
When I go to debug, the error appears to be on the line
If CDbl(rng.Value) = CDbl(FC.Formula1) Then
View 9 Replies
ADVERTISEMENT
Aug 30, 2006
I have a column of values that I want to convert.
The are all generally along the same lines as the below example:
Values is 500000 I want to change it to 5000.00
does anyone have any idea how I can put in a decimal point to two digits before the end of the value.
View 6 Replies
View Related
Oct 4, 2007
I cant figure out how to do this, see attached example
I want to use a drop down list on sheet 1 to select a cell from column 1 on sheet 2 and fill in cell e1 with data from column 1 and 3 on sheet 2?
View 5 Replies
View Related
Nov 19, 2007
I'm trying to find out how I get a cell to automatically find a code based on the selection of a drop down menu. If drop down menu selction is Rent I want the cell to automatically find the code for rent 61100. It's a large selection that will grow alot bigger than it currently is so needs to also have growing room.? I can't seem to find any answers on here already that seem to work on this, (or understanding them is maybe my fault). I've attached the sheet
View 3 Replies
View Related
Aug 17, 2007
I need to create a function that by selecting a sheet name in a drop down box it will remove thinformation on the sheet from a consilidated sheet. The consolidation sheet is consolidating data from 30 sheets within the one worksheet
View 4 Replies
View Related
Sep 11, 2007
the attached spreadsheet is designed to record the number of days off workers have in a week. The drop down menu gives you choices to record the reason why a worker is absent but what I can’t do is total the number of days absent in a week as its words used to describe the absence and not numbers. If any one could assist me to total the days. I have attached an example which should explain the problem in a clearer manner.
View 3 Replies
View Related
Jun 25, 2013
I'm looking to use a drop-down to allow me to highlight a complete row depending on what I choose, each row is unique.
So if my drop-down is say 20 different words and I choose "Oil" I want it to look down the table and highlight the row that shows oil prices.
Example of column A might be as shown below (Starting in say A3).
(A3)Petrol
(A4)Wood
(A5)Oil
(A6)F/Fuel
(A7)Other
From my drop-down located in A1 I choose "Oil" I want it to select only row A5 and either highlight it or blank out the rest.
View 7 Replies
View Related
Feb 3, 2010
There is a macro i wrote that assigns buttons to different tasks, and it changes the name of each button to whatever task the user utilizes it for. I would like for the changes to be permanent, and i can do it if i can just keep the information in the userform. So, the most logical solution is to permanently change the names of the buttons in the userform, but this has to be accomplished by the users choice, which means i don't do it through the vbe. How do you change a button's caption permanently through macro?
View 9 Replies
View Related
Feb 6, 2014
Scenario: I have 5 different tables, all having the same headers. The values under are Vlookups.
Objective: Create a dropbox that lists (Table 1, Table 2, etc.) For whichever table is picked, is the one that will show.
For example, if I want table 1 to populate, I would chose table one in the drop box and so on for the rest of the other tables.
View 6 Replies
View Related
Feb 21, 2009
I am a trainee dermatologist. We undertake allergy patch tests. There is a long list of different patch tests which are selected based on the patients history. I have put each of the types of patch testing on a master sheet. What I would like to be able to do is to have a control button next to each set, and when clicked would add that particular set to a "new patient" worksheet tab. And with every set having its own button, more than one set could be added to a new sheet. In the new patient worksheet id like the sets added with a single row gap between them.
I had tried, and managed to get a single series to work, but then it wouldnt allow me to add the next set, saying that sheet already exists. Ideally finally, id like there to be some way, or message to make sure after printing the new patient worksheet gets deleted.
I hope that all makes sense ! Even if I had a code for a single button that added to a master sheet at the next available row +1 I think I could manipulate the code to suit.
View 9 Replies
View Related
Feb 22, 2009
Basicly I used conditional formatting and lots of "IF".My solution lacks in style and it's time consuming ..
Long story short: I need to modify the way some cells are displayed based on the selection in a specific dropdown list.
I need that whenI select Task3 from the dropdown list next to "step1: please select" , everything from row 15 to row21 (both 15 & 21 rows included) and from row 23 on, to disappear.
View 9 Replies
View Related
Apr 25, 2008
I am attempting to populate a row of several cells on a worksheet using a drop-down list, using data from a seperate worksheet in the same workbook. The worksheet containing the data will be hidden (I do not think that matters in this case). Do I place a VLOOKUP function in the first worksheet cells? see attached sample
DropDownSample.xls
As a follow-up question, as time goes by, the data in the source worksheet will be appended with new items (additional rows of data). As each new item is added, will I need to edit the formulas, or is there a way for Excel to dynamically add the new data? This might be stretching my wish list a bit but I thought I'd ask.
View 3 Replies
View Related
May 7, 2008
I have a set of data on excel and would like to make searching for it easier.
I have created a drop down list in cell B4 (say, "Banana", "Apples" and "Orange"). Is there a way that if i select "Banana" in cell B4, excel will automatically go to cell A20 ?
View 3 Replies
View Related
May 4, 2008
how to make a cell to change color oatomatically accordant to Year and Month reflexted already in the cell. I have a spreadsheet with Names,Surnames,DOB and also a column that is given the AGE years months and days.
If somebody reaches 21 -1 -2 -3 months this should show different colors in the persons row in a particular column. The function used for the AGE is fund on ozgrid.com: =DATEDIF(H4,TODAY(),"y")&" years "&DATEDIF(H4,TODAY(),"ym")&" months "&DATEDIF(H4,TODAY(),"md")&" days"
View 4 Replies
View Related
Jul 2, 2014
I need VBA code to do the following:
When cell H2 = "Weekly", I need cell I2 to return "50".
When cell H2 = "Bi-weekly", I need cell I2 to return "25".
The value in Column I should change as soon as the value in Column H changes.
NOTE: The value in Column H is chosen from a Data Validation List.
I'm assuming offset is the best option?
View 7 Replies
View Related
Mar 19, 2009
I'm trying to create a drop down list which returns values based on what has been selected in the previous drop down list in the adjacent cell, e.g. if 'Apples' is selected in the previous cell then you should only be able to select from 'Gala, Granny Smith', or if 'Oranges' is selected you should only be able to select 'Seville, Blood Orange'. Is there a formula which would do this, or can I use a pivot table somehow? I'm totally stumped.
View 2 Replies
View Related
Oct 26, 2009
I need to have a drop down list which displays a different set of values depending upon the value selected by a previous drop down list. ie. (drop down box 1)= x, y, z. (drop down box 2)= either x1, x2, x3, or y1, y2, y3, or z1, z2, z3. I can produce a single drop down box thats not a problem but linking several drop down boxes is beyond me .
View 4 Replies
View Related
May 23, 2009
I've attached a workbook which contains two sheets:
PAYM
DEVICE_PAYM
Data is updated on DEVICE_PAYM each day with the figures I need located in column "AN". I need to be able to copy the data from "AN" and paste it into a column on the PAYM sheet. The destination column on the PAYM sheet needs to be specified by inputting a specific date - ideally, I would like to use the calendar Add-In as part of this process. I've already input some code for the calendar but am unable to develop this further so that it finds the correct date column and pastes the data across from the other sheet.
View 2 Replies
View Related
Dec 22, 2008
1. I would like to be able to select a month from a drop down ( cell C4), and for Column B ('Cumulative Performance') to reflect the sum for each name between Jan and the month selected.
2. In Column D I would like to rank the relative position of the sum total; such that if I selected 'Dec', John would display '13' in D7, Anne '3' etc.
3. In Column E I would like to show by way of a coloured arrow (or even a smilie icon) the relative change in ranking of the sum totals evaluated for my chosen month with those calculated up until the previous month (e.g. for Anne, if I select June, the Jan to June total is 36 (rank 2 in the June total's), the May to Jan total for Anne is 32 (rank 1), therefore her relative rank movement between the June and May cumulatives moves down and cell E8 would show a red-down arrow (amber horizontal for no change and green up-arrow for an improvement in rank).
View 5 Replies
View Related
May 11, 2006
I developed a timesheet interface using Excel. I am creating an setup-like phase for when the time sheet is first opened which determines file path names and what not. I basically I have 2 questions which basically tie into each other:
1. How can I ensure that the code only runs the first time the workbook is opened?
2. Is there anyway to store the data (for example the pathname to a certain file) without storing the actual data on a spreadsheet for it to be pulled from? I guess I could use a seperate file but I'd like to avoid that if possible.
View 2 Replies
View Related
Jul 22, 2013
I would like to link two cells which are in different workbooks / Files. Now this is something I already know how to do, however there is complication and I am not sure if the following is possible. I would like to link these cells so that they stay linked even if the file name of the source cell changes. I am not sure if thats possible or how to go about it if it is. This sort of thing is possible (although a different concept) in the Solid Modeling program Solidworks. Often times assemblies are created using a number of files. When the filename of one subcomponent is changed, or the file is relocated the final assembly will no longer work. So a method has been created to automatically update the link if the file is moved or renamed.
I would like to be able to do this in excel. ( I should note that I was only using Solidworks as a reference, it really has nothing to do with what I want out of excel, the data will not have anything to do with solidworks or its files, it will be simple numbers letters and formulas that I wish to link between workbooks)
View 1 Replies
View Related
Dec 15, 2008
Working on a simple worksheet_change issue for someone, the thought came, "after this code runs" it would be good if the TargetRange changed to no longer include the rows it had run on already. This way, if you later accidentally deleted/edited a cell that already had data, it wouldn't cause the macro to run again and do the paste job again?
Anyway, here is the code original
View 11 Replies
View Related
Mar 30, 2007
AHH Scientific notation is annoying me, I don't want to see auction #'s in scientific notation. How can I disable the feature in excel 2007?
View 9 Replies
View Related
Jul 11, 2012
Is it possible to display a particular excel cell (for example cell A1) on Desktop permanently?
If yes then - HOW ?
View 4 Replies
View Related
May 29, 2013
Is there a way to permanently hide the toolbars and protect the workbook that when others open the document, they will not be able to view or have access to this.
View 6 Replies
View Related
May 8, 2014
I am tracking baseball batting statistics. The first column in each row is the player's name and the next column is the date. Several columns of statistics follow. I enter the batting stats game by game. I know I can use the SUBTOTAL function combined with AutoFilter to view each player's statistics individually totalled, but what I'd like is to see that subtotal line permanently displayed for each player.
View 2 Replies
View Related
Dec 9, 2009
I have a drop down box in column N, however I would like the options in that drop down box to change depending on what appears in column M.
If column M Says "Lapse" then I want one drop down box to appear in column N, If coumn M says "NTU" then I would like column N to show different drop down options.
View 12 Replies
View Related
Nov 29, 2011
I have sent a data sheet template to my client in which they paste their data, based on this data sheet analysis will be done automatically in next sheet "Summary".
Whenever they paste product code, vlookup is not working since the product code contains few are numeric (shows: "Number Stored as Text"). I advised my client to go with "Text to Column" and "Delimited" to change it as numeric. But my client feels this method is tedious one. Is there any alternate way to make that column as numeric permanently?
View 5 Replies
View Related
Feb 28, 2012
I have 100,000 lines of data and an trying to highlight values in column B based on those in column A.
For example if 1 appears in A then several times in B then it should highlight each instance in B where it appears in B. However is 2 appears twice in B - but not in A - then it should not highlight any cel.
Column A is the criteria list I think there are 140 unique values.
Column B is the data I need highlighted there are around 100,000 rows. In there values from column A appear multiple times. I need all of the multiples in B - where they match a value from column A - highlighted.
View 5 Replies
View Related
Jan 7, 2009
I have setup a worksheet with multiple drop down menu's, all with different available options to choose from. If I go to the 1st drop menu and select say option 2, is there a way I can assign a dollar value to option 2 so that when I select that option, it posts the dollar value next to the drop menu? Then go to the 2nd drop menu select say option 4 or whatever, and do the same with the value.
That way at the end of the list of drop menu's I have a total of what the options that I have chosen for this particular piece to have and have a running total of what it costs?
To get the drop menu's I just listed a bunch of options for question 1, then went to data, validation, list, and selected those options. Then did the same and so on for other options.
View 7 Replies
View Related