I have a cell with data validation that I would like to look at table and be dynamic rather than a manual selection. So when I add to the list the data validation will reconise there are more options.
View 7 RepliesHow can I select a particular data item in a data validation cell. My requirement is that I need a particular item to be displayed in data validation cell(I already have the item value with me)
I tried recording but it doesnt work.
I want to load the actual data exist in the rows by selection value from the data validation list.
E.g I have two worksheet in one excel file. One has a data activities of persons with their name like two columns i have in which one exist the name of person and second exist the activities which they perform.
On the second sheet, i made a data validation list of all the person names
Now my requirement is, when i select a person name from the list, load all the data from the 1st sheet to second sheet. Is this possible without VB code, because I want to share it on the Google sheet with my boss, where VB sheet is not supposed to work.
I have two fields that do the same thing [preset selection vs custom entry], and I need to restrict one from holding any data if the other already does. One field is a drop-down menu, and the other is a decimal entry. It was easy to restrict the decimal from being entered if a drop-down selection has already been made - Data Validation prevents any entry unless the drop-down cell is blank. It's not so easy to restrict the drop-down, however, as it already uses List-type Data Validation to allow only values from a specified range.
Does anyone have any ideas for allowing the drop-down to function as normal if a specific other field or range is blank, but not allowing a selection to be made if that specific field or range already has data in it? I've attached a simplified example worksheet.
I have a large set of data that I need to use for data validation in drop down lists. The data is arranged in 4 columns and entries within each column may repeat numerous times. The four columns are as this..
Category Subcategory 1 Subcategory2 Subcategory3
The first data validation will come from the first column. Once this is chosen the second drop down should populate with the subcategory that correspond to that category stored in column 2. once that is chosen the thrid data validation should populate with the corresponding subcategory from column three etc.. This is a small sample of the data in the columns.
I have researched and used some code that allows the user to select mutliple items from a list. This is using the Data Validation tool with a list and some code in the relavent sheet. It all works well and as described.
However, when I lock the Worksheet, the multi selection no longer works. Selection cells are ofcourse unlocked when sheet is protected.
I have also trialed unlocking the whole row that the multi selection exists in, no effect.
My understanding of this code is at about 50%.
Is there a way of being able to lock the sheet and retain this ability of multi selection. Maybe there is some other code I could refer too?
Code:
' Developed by Contextures Inc.
' www.contextures.com
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rngDV As Range
[Code].....
Basically I have a form where the list can expand and contract so there will always be varying row lengths.
What I would like to see is a drop down list that shows a) the actual populated field and b) a description of the field when the drop down list is present.
I believe this can be done with a combo box however that would be a lot of work.
I am trying to find something that would allow me to have a spreadsheet clear the contents of a certain cell based on the selection made from a data validation list which resides on the same row. This can best be described with an example.
The user selects anything but " " or "none" from the validation list, which for this example resides in C5, would trigger code to clear the contents, if any, in AA5. If " " or "none" is chosen the value remains.
This capability should be available for each row through 100.
I'm using Excel 2007. I would like to seek some advise on how i may update cells after selecting a month from a drop down list.
i have created a simplified version of what i intend to have. One the 1st tab 'Cash Budget 2009', i have filled up a table with numbers, sorted by months. On the 2nd tab 'Dec09', i would like to create an expense table, to be able to be selected by month. So i have created a drop down list based on the months that are created in the 1st tab.
Upon selection of the month from the drop down list, i would like the cells to display (fetch) the data from the 1st worksheet. It would also be helpful if the name of the 2nd tab can be updated to read as the month that is being selected.
I've created seven names in my data validation source list on Sheet 3 in the following range of cells, A2-A7. My data drop down validation list is located on Sheet 1, A2 in the same workbook. I would like to trigger a macro based on the name I select in this drop validation drop down list that will fill out an address, telephone number, and email address in the following cells next to my data validation drop down list on Sheet 1: B2, B3, and B4. I want it to be designed so that users will select a name and have that person's corresponding address, telephone number, and email address fill right next to their name on the same sheet.
View 6 Replies View RelatedI am using Excel 2002..
I have a spreadsheet that is used continuously. It is reset each month. My pivot table dropdown selection (Data) has data from previous months. How do I delete this data?
I'm building a workbook that has a tab for each department (sales, admin, tech, etc.) w/i a project. I also have an inputs and instructions tab where I have all of my lists and background info hidden.
Essentially, on each tab, the user will build a team for the project using drop down lists. The lists reference data on the inputs tab. This data includes a list of all of the titles in the company, as well as which department they belong to. I want the validation to be structured such that the sales tab drop downs only see sales titles, admin only sees admin titles, etc. I also need it to be dynamic in its drop down inclusions so that when I add/subtract titles, I don't have to reset the validation for new cell references. Below is an example of the what the reference data looks like.
Input Tab:
Col A --- Col B
Dept --- Title
Sales --- Rep
Sales --- Sr. Rep
Admin --- VP
Admin --- SVP
Sales --- Closer
Tech --- Analyst
Tech --- Developer
Possible to get a pivot table to automatically expand the range selection of data as it grows. I have a worksheet that grows daily and I am running a pivot table from this. If I refresh the pivot table it doesn't pick up new data unless i change the range or i have a huge range selected in the first place. Problem is if i select a huge range then the grouping options i am using won't work correctly.
View 5 Replies View RelatedI'm trying to create a table with drop down options for each cell (a different set of options for each column). Normally I'd use data validation, but I need to use Excel Services with this document, and that doesn't support data validation. I've seen mentions of using pivot tables to accomplish the same thing, but I can't find an example that works for my situation. I have eight or so column headers, and need a fairly large number of rows, all with the dropdown option. Is there a way to do this?
View 2 Replies View RelatedI have three lists and I want to summarize them in one table. I can do this by formula or using Data validation by position. Who is the best way? There is a difference between them?
View 3 Replies View RelatedSee the attached:
1/ Need to be able to populate a table with the following data (or as illustrated in ' Sheet 1'.
Company Name, Year, Manufacturing, Non-Manufacturing
This data will need to come from the lists for each of the variables as opposed to from the table, as this will be hidden from the user. Also, more company details will be added over time.
I am building an Excel file that will be used to track information and at the core of it all is a list of people from different offices where the number of people per office can change and/or a person leaves the company and is replaced by another. I'll simply:
Column A Column B
Office Employee
Hamilton Emp 1
Hamilton Emp 2
Hamilton Emp 3
Toronto Emp 4
Toronto Emp 5
Toronto Emp 6
Toronto Emp 7
Toronto Emp 8
Waterloo Emp 9
Waterloo Emp 10
This will be all on Worksheet 'Info'. I have a Worksheet for each Office and named them accordingly. On each worksheet I want to use Data Validation on a column, we will call it 'ChosenOne', set it as 'List' and have the Source pull all the employee names that belong to that office and use them as a selection
ex: Hamilton Worksheet, 'ChosenOne' would show Emp 1, Emp 2, and Emp 3 in the list.
If Emp 3 changed offices to Waterloo 6 months from now I would like to change A4 from Hamilton to Waterloo and the formula would not have to be changed and the next time someone selects 'ChosenOne' it would only show Emp 1 and Emp 2.
Of course this means on the Waterloo Worksheet, 'ChosenOne' would show Emp 3, Emp 9, Emp 10 now.
So basically I am trying to not specify a specific named range for each office and am hoping there is a way to poll information from a Table (or any other tool that can simplify this).
I would be ok with something like:
Column A Column B
Office Employee
Hamilton Emp 1, Emp2, Emp 3
Toronto Emp 4, Emp 5, Emp 6, Emp 7, Emp 8
Waterloo Emp 9, Emp 10
and just move Emp 3 from B2 to B4 but I don't know if a list can be created from multiple items in a single cell seperated by a , or ; or :.
I have a table with job numbers in one column and sub tasks for each job in a seperate column. I want to control the filter in the jobs column with a data validation cell. The data validation cell has all the job numbers in it and when I select job number "XYZ" in the data validation cell all other jobs are filtered out of the table.
View 1 Replies View Relatedi am attaching a sheet here.
i have put data validation list in three columns
from data lsts i select unit type , then hinge type then code.... the problem is that as soon as i select code all the values (H W D ) in the next three cells should automatically change.
the values against each cabinet code are also provided in the same sheet.
Sr No.
Unit Type
Unit Type
Code
H
W
D
Qty
1
Base Unit
Double Hinged Door
B60
720
600
580
2
2
Base Unit
Single Hinged Door
B30R
720
300
580
4
I have attached a sample data sheet which i am working on . ITs a comparitive matrix trable with Input validation between 0&2 . I also want the table to be dynamic .If i want to increase or reduce no. of rows and clumns i should do it some how . More details are mentioned in the attached file .
View 1 Replies View RelatedI found this code and am trying to use it to update the filter in my pivot table (sheet 6), based on the data validation selection in sheet 1, but when I make my selection on sheet 1, nothing happens.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim ws As Worksheet
Dim pt As PivotTable
Dim pi As PivotItem
Dim strField As String
strField = "Region"
[code]....
I have a spreadsheet where I am tracking several entries in a table that will keep growing. Three fields are Data Validation Drop Down Lists. The macro below works well to clear the two lists to the right when the first one is changed by the user.
[Code] .....
I want this to affect the rows below it in the table as they are added.
I am familiar how to perform the task of bringing in an access table into excel, then using a data validation filter to control the data set in Excel 2003.
How to replicate this procedure in Excel 2007?
The code below lets me select more than one item in a column 14 dropdown and put them in the cell.
I am trying to let another column have the same properties. This time it is column 17. I tried adding another line but it doesn't work. Can anyone help with the code.
A list in A2 of Sheet 1 of workbook has values "Select", "Yes", "No". How can I get the functionality using VBA so that until a certain rule is met (say A1 becomes 1) selection of items in the list is disabled? (Or any selection of items in the list returns a value of select only?
View 4 Replies View RelatedI'm trying to figure a to enforce dual data validation on a single cell. That is, I need to restrict the user to entering only a decimal value, only if a particular other cell (say A2) is blank. To put it another way, if A2 is blank, the user can enter a decimal value, but if A2 is not blank, the user cannot enter anything. I can use Data Validation to enforce either the decimal restriction or the ISBLANK, but I'm not sure how to make them work together.
View 2 Replies View RelatedI have my data with column A being the Week ending date (a saturday date) for which the data was entered. In column B it is simply the Month that the data was entered. On another tab...the user can select weekly or monthly. What I would like is a validation drop-down that corresponds to the selection.
IE - If weekly is chosen, the validation will allow the user to select a week that is found in Column A in the data. If monthly is chosen, the validation will show the months from Column B instead. Is it possible to have one validation dropdown, that the validation LIST can be conditionally select based on input in another cell? (A1 being Weekly or Monthly - and B1 being where the validation dropdown would be)
I have a workbook with various "in cell" validation selection boxes.
All worked well, but now the width of de dropdownbox is very big, stretching over several cells. The cell width is 70 pixels, but the dropdown box is 500 width.
I tried new validation, but no matter where I place a validation of what list I use in validation the width of the dropdown is always over 500 pixels? How to change that?
I have been searching through the site trying to find a solution to my issue, but I just can't seen to fixt it. Here is the scenario. I am working on a spreadsheet that will read some data, use that data to update the main chart and fill in the information in a table next to that chart. I recoreded 22 macros, total. Each macro corresponds to the especific type of chart that I need/want.
I want to be able to click on a drop down menu above the chart which will have each of the 22 options. Once the user clicks on the desired option, the specific macro will run and do that it should do. When I run the individual macro (without the VB that I wrote and will mention below), the system does what it should do. Everything looks dandy. But then I added this VB code to the sheet where the chart is:
Private Sub Worksheet_Change(ByVal Target As Range)
Select Case Target.Range("A12").Value
Case "1"
Call a
Case "2"
Call b
Case "3"
Call cc
Case "4"
Call d
Case "5"
Call e................
If I have a table as noted below with the following assumptions:
- this table will likely grow
- the 'Include' column data will change based on external criteria/formulas, so the 'Include' column will not be sorted.
- Macros aren't an option as this sheet needs to be macro free.
A
B
C
1
Item
Calories
Include
[Code]...
How do I build a formula that I can place in a data validation drop down to only include 'Item's that have Yes indicated in the 'Include' column?
I've been researching this and found answers if the 'Include' column was sorted via offset, but I haven't found any to sift through when unsorted. I feel like there is a simple answer to this that I am missing. Here is the sheet --> ExampleSheet.xlsx