The field list does not appear when I create a pivot table in Excel 2007. It works properly if I start Excel in safe mode. I have toggled the field list button in the PivotTable Tools show/hide ribbon and I tried repairing Office 2007 from the control panel.
Is it possible to set up the second level of a report filter based on the value of the first report filter. I have a pivot table that needs two report filters: first is the location and the second is the department. What I want to do is have the user be able to select the location and then only show valid departments for that location. I know that this is possible if I set up a form and have the second field be a query against the first. I can create a calculated field but I cannot put that in the report filter area.
I want to print one sheet for each of the values in a page field drop-down. I can do this by supplying the values individually (code below) but would rather determine the list of values dynamically. Can this be done?
Private Sub pbPrintAll_Click() Dim cix As Integer Dim Ctrct As String cix = 3 While (Sheets("Database"). Range("B" + Trim(Str(cix))).Value <> "") ' Get value from database sheet Ctrct = Sheets("Database").Range("B" + Trim(Str(cix))).Value ' Set CurrentPage value Sheets("Customer P&L Pivot1"). PivotTables(1).PivotFields("Cust 1A_Name").CurrentPage = Ctrct ' Print formatted sheet Sheets("Customer P&L").PrintOut cix = cix + 1 Wend ' Reset Current Page value Sheets("Customer P&L Pivot1").PivotTables(1).PivotFields("Cust 1A_Name").CurrentPage = "(All)" MsgBox "Prints sent to printer." End Sub
I've created a pivot table and I'd like to index through each "value" in the page field and then copy the results to another sheet, one sheet per field returned.
I can't figure out if it's possible to index through the list though. Is it possible?
In the "Pivot Table Field List" I have the option to "Choose fields to add to report". I have a large number of fields that I want to choose and "Add to Values" - so it is tedious to select each item individually.My question: Is there any possible way select multiple fields at the same time? e.g.
a "select all" option, orhighlighting a range of the available fields (either by dragging or holding the shift key)I've looked / tried above with no luck.
Any Excel Add-Ins out there that might address this? I'm fearing not since my searches have come up empty.
In building my pivot table my data that I want to show in the column area is showing up as rows stacked on top of each other. In the column section I'm trying to show Total Budgeted Amount next to Total Actual Amount but on the layout it's showing the two stacked on top of each other is there some kind of hidden key that I'm missing?
There is pivot table for some reason the last column (YEAccts), which sums all the other columns values is exluding the 1st column for some reason. This "YEAccts" shows up fine in the pivot table "field list". And I followed the source for this and it's a table in a different tab that pulls data from an access query connection.
The name of the column that is summing up the rest of the columns is "YEAccts", but for the life of me I can't seem to find where this column is in the source table tab or even in the access query where the data is being pulled from.
How to find this "YEAccts" column? Also, why would it exclude not summing up the data in the first column?
1. I am trying to record a macro where I select a Pivot Table. But in the recorded macro "Pivot Table name" is not recorded neither the Pivot Field Property only the Range name is recorded. But on other systems (workstations) these details get recorded. Does this have something to do with excel settings?
2. I uploaded a macro enabled excel file on my company's "sharepoint" the drop down boxes present in the file get populated via a macro in "ThisWorkbook" page but sometimes these drop down boxes don't show any values. What can be the reason for this? Can't share the file because of data security policy of my organization.
I created a pivot table. But when I enter a new value in a cell it doesn't appear in the pivot table. I have to create a new pivot table and than I can see that new data is entered in a cell. For instance, my pivot table holds dates as ROW LABELS and COUNT OF these. And when I enter a new date, that date is not shown in the ROW LABELS until I create a new pivot table.
I have two pivot tables on the same worksheet, tied to different tables, but both have a "date" column. When I change the date in either tables Report Filter this code does change the page field in the other one, but the data does not refresh. My primary table is PivotTable2, once I can get this working I would hide that report filter in PivotTable1.
Code: Private Sub Worksheet_Activate() Application.ScreenUpdating = False PivotMacro PivotMacro1 Application.ScreenUpdating = True End Sub
why the Group Field option is not available in my Pivot Table. Other Pivot Tables in the same document, using data formatted the same way will let me format the data (the original data is in MM/DD/YY [h]:mm format). I have floored my data so that I can group by hour of the day, but it's not letting me do that.
I have two fields in pivot table, "HATA TOPLAMI" and "SIRA NO". "Hata toplamı" is sum of items, and "Sıra no" is count of items. İ want to divide these two fields and add it to the pivot table, like "HATA TOPLAMI" / "SIRA NO". I have tried calculated field function from pivot table. İ wrote "="HATA TOPLAMI" / "SIRA NO"". But the summary is false. I want to divide Sum of "Hata toplamı" and count of "Sıra no" but instead it divides with sum of "sıra no". Is there a way to do this?
I have a problem in expanding/collapsing fields in pivot table.
I have source table with GROUP, SUBGROUP, ACCOUNT and AMOUNT. In pivot table I've put GROUP, SUBGROUP and ACCOUNT in Row labels respectivly, and AMOUNT in values. There are same names in SUBGROUP for different names in GROUP. (for example: groups are Production costs and Distribution costs and in each of them there are subgroups Personnel costs and Other costs).
The question is: Is it possible to expand only field Other costs in group Distribution costs while field Other costs in group Production costs stays collapsed?
Ihave a pivot table that takes data from a table, groups the duplicate items and adds their values up - so it shows just one entry for each item. I now want to add a calculated field in there so that I can divide one of the fields into another.
I have attached a simple test file. The data tab has two columns in the pivot range. The third column is _not_ in the pivot range, but is there to show the result I'm trying to get with the pivot.
The idea is to count the number of people whose entry dates are greater than 2/1/2009. My third data column gives a correct result, but a similar formula in the calculated field of the pivot table gives a completely wrong result (a date), where my goal is to generate a zero, a one, or a sum of zeros and ones.
It could be a formatting issue, but that would not explain why all the pivot results have the _same_ wrong answer.
I'm new to PTs and calculated fields, and expect I've made a naive mistake that an expert could easily spot.
I have a pivot table with 2 row filters (dept and name) and then three columns - Year 1, Year 2. I need to add a calculated field inbetween Year 1 and 2 to show the variance in dollars from ( Year1-Year2) as well as an additonal a column that shows the percentage change between the tw o years . I know I can copy this over and add formuals in Excel but I need to retain the features of the pivot tables due to the 2 row filters?
I want to show the field name (i.e Surname) before the value is shown in the Pivot Table. for Example if the Field is Surname and the value is 'Smith', I want to show - Surname Smith
I've created a Pivot Table with 30+ fields. I've recorded the following macro to add the first field. I need modifying the code so that it looks for and adds every field automatically. It'd save a lot of time.
Code: Sub PTAdd() ' ' PTAdd Macro ' ' With ActiveSheet.PivotTables("PivotTable3").PivotFields("Assigned To") .Orientation = xlRowField .Position = 1 End With End Sub
I have a pivot table Field, with 3 listed items, referencing data from 3 separate worksheets - named 2004, 2005, 2006. ( i renamed them from the original item1, item2 and item3, to 2004, 2005 and 2006. I have now redefined the range in worksheet 2006 by using the Pivot table wizard and going one step back. I have now got 4 listed items in my Field - 2004, 2005, 2006 and item4. I cannot rename item4 to 2006 unless I delete 2006. But do you think it's letting me do that???? So how do I remove unwanted items in a Pivot table field list?
I have a pivot table that picks up the month an invoice was generated. Since I have several invoices for a few months in 2005, I would like to sum all the 2005 invoices into one column. I have the impression that I can insert a field within a Pivot table to sum all the amounts related to 2005.
I know in Pivot tbale we could add calculated field into the data ,but I fail to put the added in the "Page","Row" or the "Column". Eg. in the sheet of data,I have a column " DATE",but no column for year.Is it possible to add year in the "page" without adding anything into the "data" sheet?
STO-Productivity-Feb0314.xlsxI work in cancer research and I'm trying to find a way to show the amount of studies that staff have in total and their role on the study. I have a data table that contains many fields but the crux of what I'm having trouble with starts with the following:
When I begin with a pivot table I start by just selecting the all of the studies listed in the table and then the two roles that staff can have data or regulatory. Staff can do both roles or just one on a study. I put the roles of data and regulatory into the row labels and the studies that we work on in the values. The problem is that I now only see studies that the staff member works on that meet working on both roles and not the studies that they serve only one role.
UPDATE: see the attached spreadsheet to illustrate further. Ablorh is the employee that I have it focused on and it only shows the one study she has both the regulator and data roles. The 7 other studies that the employee works on in the data role do not show.
I have two fields where users enter a security identifier (cell P1) and the declaration date (cell P2) and i'd like to be able to pull all the records from the master table (A1:K10) where the security id matches (column H) and the request date (column C) is <= the declaration date (i've attached a sample file for your reference). I tried using a pivot table but it doesn't let me filter for "less than or equal to" values for the request date.
I have a problem that I'm sure requires the most elementary fix. I have exhausted google on this. All I need is a drop down list for each value field. See picture attached.
I have a table with two columns: 'Serial' and 'Read Date'. The table represents all those serials that failed to read at a certain time and date. For example:
Serial Read Date 4028543 10am Dec 16 4028544 10am Dec 16 4028566 10am Dec 16
[Code].....
I know you can move them manually but I have 73 reads so far and that's a lot of manually moving columns about.
I'd like to get Excel to use the original order of the Read date entries.