I've created a pivot table and I'd like to index through each "value" in the page field and then copy the results to another sheet, one sheet per field returned.
I can't figure out if it's possible to index through the list though. Is it possible?
I want to print one sheet for each of the values in a page field drop-down. I can do this by supplying the values individually (code below) but would rather determine the list of values dynamically. Can this be done?
Private Sub pbPrintAll_Click()
Dim cix As Integer
Dim Ctrct As String
cix = 3
While (Sheets("Database"). Range("B" + Trim(Str(cix))).Value <> "")
' Get value from database sheet
Ctrct = Sheets("Database").Range("B" + Trim(Str(cix))).Value
' Set CurrentPage value
Sheets("Customer P&L Pivot1"). PivotTables(1).PivotFields("Cust 1A_Name").CurrentPage = Ctrct
' Print formatted sheet
Sheets("Customer P&L").PrintOut
cix = cix + 1
Wend
' Reset Current Page value
Sheets("Customer P&L Pivot1").PivotTables(1).PivotFields("Cust 1A_Name").CurrentPage = "(All)"
MsgBox "Prints sent to printer."
End Sub
I have:
Excel 2003ABCD1StockDatePriceReturn2MSFT31-Dec-1027.91-6.97%3MSFT31-Dec-093054.32%4MSFT31-
Dec-0819.44-45.39%5MSFT31-Dec-0735.619.22%6MSFT29-Dec-0629.8614.19%7MSFT30-Dec-0526.15-2.13%8MSFT31-
Dec-0426.72-2.37%9MSFT31-Dec-0327.37111.84%10MSFT31-Dec-0212.92-21.98%11MSFT31-Dec-0116.5652.77%12MSFT29-
[Code] .......
and would like:
Excel 2003ABCD1Sum of ReturnStock2DateBAINTCMSFT331-Dec-970.83851.14150.5659431-Dec-98-0.33350.68793.2921531-
Dec-990.27041.77732.3668629-Dec-000.59270.4606-0.6286731-Dec-01-0.41240.04620.5277831-
Dec-02-0.1493-0.5049-0.2198931-Dec-030.27741.05841.11841031-Dec-040.2285-0.2702-0.02371130-
[Code] ...........
Code:
Sub codedPTable()
Dim pt As PivotTable
Dim strField As String
Dim WSD As Worksheet
Set WSD = Worksheets("Data")
[Code] ..........
Only prints this:
Excel 2003ABCDE1Sum of ReturnStock2BAINTCMSFTGrand Total3Total1.99894.69867.331214.0287Sheet2
If you have a more compact macro than what I tried to change above even better (the data is in the simplest testing format).
I have a Pivot Table with pivot fields and data. I would like, through VBA, to get the list of values that can be chosen from a given pivot field.
For example, a list would be Product1 / Product2 / Product3 .... I would like to read that list and put it into a drop down list in a form.
GOAL: I have several Pivot tables on the same sheet with similar fields and I want through macro to allow the user to update them all with one click.
I know in Pivot tbale we could add calculated field into the data ,but I fail to put the added in the "Page","Row" or the "Column". Eg. in the sheet of data,I have a column " DATE",but no column for year.Is it possible to add year in the "page" without adding anything into the "data" sheet?
View 5 Replies View RelatedIs there any way how you can change value in page field in pivot table using formulas? I know this can be done with couple of lines of VBA, but I need to create VBA-free excel file.
View 4 Replies View RelatedI have created a system where users input data from a report into a spreadsheet, and after input it is sent off to various other workbooks depending on what was entered. I.e. The user is inputting test data on a location in a region. The regions make up the workbooks, and each location is a worksheet (While I can think of better ways to organise the data changing this is not an option here).
When the macro encounters a location in a region that hasn't been entered before it adds a new sheet based off the name of the location in the region's workbook, and creates a new named range for that sheet.
I'm running a pivot table in the central workbook, and I want to add the new named range to the page field when I create a new sheet. This is what I don't know how to do. EDIT: To clarify, the page field is choosing between which worksheet(via named range) is being shown currently.
i have pivot table that has a field called "supp" is it possible to write a macro that will open up the "supp" drop down box select the first result .print the results of the pivot table. then goto the next selection in the same drop down box and print them results . repeat this until allresults have been printed.
when the pivot table is run weekly the results in the field "supp" will change
in my Pivot Tables page field i could have 20 results. 10 could be customer identification codes
5 material codes, 5 a different material code, i called "inter", and the rest supplier codes, example i05,i05/1,i05/2, fo1,f01/1,f01/2 are both material codes,
what i want to do is have a macro /macros to select and print groups
as follows
1. (all)
2. inter
3 any containing the words i05 and f01 which includes i05/1 etc
4. then the rest
if any does not exsist ignor. if possilbe a macro for each or a drop down box to select
I have linked a graph to update from a pivot table. I would like to print a copy of a graph and pivot table for each item in the page field.
Can a macro loop through each page field and print?Is there a way to send them to the printer all at once? (I noticed the printer hangs when manually printing page by page)
I've tried "view all pages of pivottable" but then I lose the view of the chart. I tried recording the events but the number of items in the page field changes with each data update and I'm not sure how to write code to accept this.
I am trying to write a list of pivot table page filter pivot items to the Immediate window - but only hidden items. The code below should do the job where the active sheet is a pivot table.
However when I change the page filter pivot items being hidden, the pivot items returned by the macro don't change. It seems to assume that all pivot items are hidden when in fact it may be only one or two. It will work though for pivot row items (pvt.RowFields) and pivot column items (pvt.ColumnFields) where the user changes them.
Does the pf.HiddenItems collection work for RowFields and ColumnFields but not PageFields? If so, is there a pivot field object that reliably holds hidden pivot items residing in the page filters?
Sub ListHiddenPageFilterPivotItems()
Dim wb As Workbook
Set wb = ThisWorkbook
Dim ws As Worksheet
Set ws = wb.ActiveSheet
Dim pvt As PivotTable
Dim pf As PivotField
Dim pi As PivotItem
I have a pivot table which I want to force the all of the pivot table items to be selected for a particular pivot table field. One would think that this would be as easy as unlocking all cells on the sheet with the exception of this pivot field and then locking the worksheet. This doesn't work though as I am generating multiple pivot tables on the same workbook for the same range and I get this message: "this command cannot be performed while a protected sheet contains another PivotTable report based on the same data source...".
My thinking is that I can do something along the lines of this:
Private Sub Worksheet_PivotTableUpdate(ByVal Target As PivotTable)
Dim oPI As PivotItem
Application.ScreenUpdating = False
If Target.PivotFields("Item Sold").PivotItems.Count Target.PivotFields("Item Sold").VisibleItems.Count Then
[Code]..
This is failing right away though on the If Target.Pivot.... line.
I am trying to create a macro that will change all pivot fields with a certain name to the value I have the master pivot changed to. For example, I have 5 pivot tables, which each contain the field "Fruit". I want to change the 1st pivot table to "Apples", "Oranges", and "Pears" as active values, and then run the macro, making the other fruit fields also have these values. I can do it for single items, but when I need to do multiple items, I get an error message. I'm not sure how to write in VBA in order to do this.
View 5 Replies View Relatedon the pivot table field list-enable on the right hand side of the screen, only after that the needed fields can be dropped in.
Is there any other method to draw the pivot table?
The field list does not appear when I create a pivot table in Excel 2007. It works properly if I start Excel in safe mode. I have toggled the field list button in the PivotTable Tools show/hide ribbon and I tried repairing Office 2007 from the control panel.
I've a Pivot Table which i would like to get a list of it.
It is from an OLAP cube from Oracle
Based on the image below, every month i refresh this PT, there will be an additional WK. Lets say WK22.
How do i export the whole list from WK08 to WK21 everytime after i refresh my PT?
How do i select the last item in the Page field? If there is WK22, den it will auto select WK22. If not WK21.
How can I change my Pivot Table Field List to produce Sum of the values rather than Count of Values?
View 1 Replies View RelatedIs there any code or way to generate the compete list of fields that are selectable from the " PivotTable Field list"?
I have various cubes I need to check and compile the list of fields for each.
Is it possible to set up the second level of a report filter based on the value of the first report filter. I have a pivot table that needs two report filters: first is the location and the second is the department. What I want to do is have the user be able to select the location and then only show valid departments for that location. I know that this is possible if I set up a form and have the second field be a query against the first. I can create a calculated field but I cannot put that in the report filter area.
View 2 Replies View RelatedExcel 2003
I have a table with a header row of scores 1-10 in B4:K4.
In column A I have a list of locations A5:A68. People in each location were asked to score an event between 1 and 10. The count of their scores is under B4:K4, eg Location 1, 3 people scored 1 (entered in B5), none scored 2 (C5), 6 scored 3 (D5) etc through to the score for 10 in K5.
What I am after is the average for each location so that in L5 I can say 'for all the respondents for Location 1, the average was:...
This may be a bit more complicated than it appears as presumably there will be a requirement to multiply the number of respondents by their scores and then ... ?
In the "Pivot Table Field List" I have the option to "Choose fields to add to report". I have a large number of fields that I want to choose and "Add to Values" - so it is tedious to select each item individually.My question: Is there any possible way select multiple fields at the same time? e.g.
a "select all" option, orhighlighting a range of the available fields (either by dragging or holding the shift key)I've looked / tried above with no luck.
Any Excel Add-Ins out there that might address this? I'm fearing not since my searches have come up empty.
I have a Pivot table showing costs of several types of items.
The issue is, the cost of an item is not in U$, it is in amounts of the unit value (example: Unit value of an item (cell A1) = U$500, and Item Cost (cell B1) = 2, the total cost is U$1000).
So instead of showing just the Item Cost (U$500) in the pivot table, I need to show 500*2 (A1*B1) which would be U$1000.
Can this be done in Excel 2010?
I don't want to create a new column with that multiplication, because I'm doing a monthly cost for the items.
I believe that I am finally getting the hang of pivot tables and VBA ... pretty nice. Now for my latest frustration - calculated fields.
I have a pivot table created which compares two years of data. The problem seems to be that this data is from the same data field (PINSAL) even though it shows in two columns (year 2007 and year 2008).
1 - I need to subtract the 2007 figure (column C) from the 2008 figure (column D) in a calculated field called DollarVariance
2 - I need to divide DollarVariance into the 2007 figure to create a calculated field called PercentVariance
This seems easy to do if I had two different variables used to create the 2007 and the 2008 data but it is the same datafield. Can I use column letter? Can I use the column name assigned by the pivot routine (12 - 2007 and 12 - 2008)?
I have a table of data which I am analysing in a Pivot Table. For the majority of the data, the Pivot works very well: however I have a small issue, but it subsequently means the Pivot is useless.
Within the table array that I am referring to, there is a column of data of "Days per employee for a given period". The rows of data within the table array relate to every absence entry per employee, but this final column of data always contains the same figure (although can differ from employee to employee).
When I put the data into the Pivot, I can summarise the absence(s) as a simple sum. However, this final column of data should not be summed, since it is already the sum figure.
This figure though needs to be part of the Pivot, since I need to report on the percentage of absence days per type over the given period. So, the simple representation of =absence day(s)/worked days does not work... well I cannot get it to work. Additionally I have tried features like % of, but nothing.
I am using excel 2007.
Excel 2007
No empty rows
No empty cells
No calculations in cells
Field names look fine - no punctuation no merged cells
If I select one column - any single column I can generate a pivot table but not with multiple columns
I have a set of sales data and need to create a run rate which is simply = Total Sales/Selling Day
Selling day changes most days.
I put the calculation into my pivot data but it's summing up, (instead on 12 I get 720) so I changed this to Average so I get the right figure in the Pivot but when I then use this field, it doesn't use the Average amount, it uses the summed figure.
So what I need is Total Sales/X
X = Cell Reference
Using Excel 2013.
I am trying to get DistinctCount from a field if another field in the same table is greater than zero.
PowerPivot DAX -COUNTIF
[Code] .....
The count returned includes all not just values greater than zero. How can I get just values greater than zero?
I'm having an issue getting the correct results from a calculated field in a pivot table in Excel 2007.
In column A I have "Business Name", in B I have a sum of the amount of lines a customer has, and C is a MAX of the number of employees the customer has at their location.
In one example I have a business with sum 50 lines and max 30 employees but when I try to make the calculated field 50/30 (should equal 166%) i get 9.2% instead.
The reason appears to be because there are 18 types of lines the customer has and 18 x max 30 = 540 and 50/540 is 9.2%. In the attached example it's all the same business location so the total number of employees (30) is the same for each row and each row in the raw data is a set of lines with similar features.
I attached an example. CalcFieldProblem.xlsx
I'm using Excel 2007 and am having an issue with grouping/ungrouping fields in pivot tables.
I have 2 separate pivot tables, both from the same named data source, but summarizing different data selections. Both tables include the date field, I am trying to produce both a daily and a monthly table, but whenever I change the grouping/ungrouping of the date field setting on one table, the other table changes to the same grouping.
Is there anyway to have one table with an ungrouped date field and one table with the grouped to month date field?
How do I create a Named Range that is dynamic (I think using the OFFSET function) that automatically expands and contracts as the rows and columns of my data changes?
Next step, I then want to use that Named Range as the source of the data for a PivotTable.
Yes, I know starting in Excel 2007 you can use Tables and don't need to create a dynamic named range. That is not an option at this time.