Is there any code or way to generate the compete list of fields that are selectable from the " PivotTable Field list"?
I have various cubes I need to check and compile the list of fields for each.
In the "Pivot Table Field List" I have the option to "Choose fields to add to report". I have a large number of fields that I want to choose and "Add to Values" - so it is tedious to select each item individually.My question: Is there any possible way select multiple fields at the same time? e.g.
a "select all" option, orhighlighting a range of the available fields (either by dragging or holding the shift key)I've looked / tried above with no luck.
Any Excel Add-Ins out there that might address this? I'm fearing not since my searches have come up empty.
I am trying to use a summary field in the pivot table in a new calculated filed, but am unable to do so. Let me first describe the context so its easier to understand:
I have a collection of customer purchase records, which look like the following:
Customer Name, Customer ID, Purchase Amount, Activation Date
-------------------------------------------------------------
John , 100 , $150 , 2011-04-01 17:07:50.0
John , 100 , $250 , 2011-04-01 17:07:50.0
Paul , 101 , $125 , 2011-08-20 11:10:27.0
I have several 1000 records like the above and I need to create a summary report which looks like:
Customer Name, Total purchased, Activation date, Avg monthly purchase
-----------------------------------------------------------
John , $350 , 2011-04-01 , $175
The average monthly purhcase needs to be calculated based on the date of report generation. So in the case above, the average is calculated as of 2011-06-01.
In order to generate the report above, I created a pivot table with "Customer Name" in the "row labels" section and "Pruchase amount" and "Activation date" in the "values" section of the pivot table. When I try to calculate the "Avg Monthly Purchase", I'm running into the following problems:
1. The activation date is not being displayed as a date, but instead shows 0, when I set the value field settings to "Min"
2. I tried to create the "Avg Monthly Purchase" as a Calculated Field and then use the "Sum of Purchase Amount" field that the pivot table calculates. However, I'm unable to reference the "Sum of Purchase Amount" field in the calculated field.
I have a Pivot table that pulls the Avg of two fields for two months, see example below.
Avg Gross $ Avg Net $
Jan 2014 20 10
Feb 2014 30 20
sample 1.png
See sample attached.
The Avg Gross and Net is shown by going into the values and selecting "Summarized value by -> Average".
On the right side of this Pivot, what I wanted to do is to show a Avg Gross to Net $ in this pivot. So the formula should take "Avg Gross $" - "Avg Net $" = Avg Gross to Net $.
I am having trouble calculting this new field in the pivot table using a calculated field because the Calculated field pulls the variables from the existing field list and there isn't a field called "Avg Gross/Net"....I need to find a way to calculate the Avg Gross to Net into the Pivot table so I can pull a pivot graph out of it.
on the pivot table field list-enable on the right hand side of the screen, only after that the needed fields can be dropped in.
Is there any other method to draw the pivot table?
The field list does not appear when I create a pivot table in Excel 2007. It works properly if I start Excel in safe mode. I have toggled the field list button in the PivotTable Tools show/hide ribbon and I tried repairing Office 2007 from the control panel.
How can I change my Pivot Table Field List to produce Sum of the values rather than Count of Values?
View 1 Replies View RelatedI have a Pivot Table with pivot fields and data. I would like, through VBA, to get the list of values that can be chosen from a given pivot field.
For example, a list would be Product1 / Product2 / Product3 .... I would like to read that list and put it into a drop down list in a form.
GOAL: I have several Pivot tables on the same sheet with similar fields and I want through macro to allow the user to update them all with one click.
Is it possible to set up the second level of a report filter based on the value of the first report filter. I have a pivot table that needs two report filters: first is the location and the second is the department. What I want to do is have the user be able to select the location and then only show valid departments for that location. I know that this is possible if I set up a form and have the second field be a query against the first. I can create a calculated field but I cannot put that in the report filter area.
View 2 Replies View RelatedI want to print one sheet for each of the values in a page field drop-down. I can do this by supplying the values individually (code below) but would rather determine the list of values dynamically. Can this be done?
Private Sub pbPrintAll_Click()
Dim cix As Integer
Dim Ctrct As String
cix = 3
While (Sheets("Database"). Range("B" + Trim(Str(cix))).Value <> "")
' Get value from database sheet
Ctrct = Sheets("Database").Range("B" + Trim(Str(cix))).Value
' Set CurrentPage value
Sheets("Customer P&L Pivot1"). PivotTables(1).PivotFields("Cust 1A_Name").CurrentPage = Ctrct
' Print formatted sheet
Sheets("Customer P&L").PrintOut
cix = cix + 1
Wend
' Reset Current Page value
Sheets("Customer P&L Pivot1").PivotTables(1).PivotFields("Cust 1A_Name").CurrentPage = "(All)"
MsgBox "Prints sent to printer."
End Sub
I've created a pivot table and I'd like to index through each "value" in the page field and then copy the results to another sheet, one sheet per field returned.
I can't figure out if it's possible to index through the list though. Is it possible?
I have a worksheet with two pivot tables, one of which is visible to the user. Ideally, the user should be able to change the "Row Label" field settings of the visible pivot table and then press an "update button" that then adds the same field to the second pivot table.
Ideally, the ordering of the fields should also be made similar between the two tables, though this is of less priority.
I imagine it would be something in the style of:
"If number of Pivot1 active row label fields = X then
Pivot 2.AddRowLabelField = Pivot1.RowLabelField(X)
end if"
I have a spreadsheet similar to this:
Name........Cat....Dog....Fish....Mouse
NY............Cat.....Dog....Fish..........
NY............Cat...............Fish....Mouse
DC.....................Dog..............Mouse
DC...............................Fish............
CA ...........Cat................................
I want to create a pivot table to do this:
Name.........Cat....Dog....Fish....Mouse
NY...............2.......1.........2........1..
DC...............1......1..........1............
CA ...............1.............................
I have been unable to get it formatted correctly. The closest I get are "sub-colums" with counts.
In building my pivot table my data that I want to show in the column area is showing up as rows stacked on top of each other. In the column section I'm trying to show Total Budgeted Amount next to Total Actual Amount but on the layout it's showing the two stacked on top of each other is there some kind of hidden key that I'm missing?
View 3 Replies View RelatedI have a set of data that I'm trying to identify the unique values in a column and then sum the related quantites against each of those values:
View 14 Replies View RelatedI have two or more fields of data, where parts of them are auto populated based on inputs from elsewhere. That part i have working fine, however the problem arises in taking that information and displaying it as a Bill of Materials list on another tab in my excel file. I want to take the information, and only display it in the BOM tab if that piece of information is being used (ie item count field not being 0). I know how to do that part in a rather simple format, however i'd prefer to make it so that when i have the list, and a certain item isn't used then its not included in the BOM, and an empty space is not left behind. I would prefer this to be all be done automatically by a formula if possible instead of just having to resort to sorting the table every time the tool is being used.
Is this even possible in excel, A quick example doc is attached, shows 2 example fields. i'd like to take the information from those 2 fields. and somehow create a single list, with a single heading along the top, with all row containing a 0 "Unit Count" to be omitted entirely from the list, and not have a blank space where the item should be. Keep in mind these fields may be greater than 2, and may not be position one after the other in a strait down line.
Example.xlsx
CountryHourDataTotalData
Austria - A10Sum of SeiA51CountryHourSum of SeiASum of SeiT
Sum of SeiT4.88Austria - A10514.88
1Sum of SeiA561562.83
[Code]....
left side pivot created in vb 6.0 & right side pivot table created manually in excel.
i want to generated pivot table using vb 6.0 same as right side pivot.
Set PRange = ws1.Range("R1:Y" & finalrow)
Set PTCache = wb.PivotCaches.Add(SourceType:=xlDatabase, SourceData:=PRange)
Set PT = PTCache.CreatePivotTable(TableDestination:=ws2.Cells(1, 1),
[Code]....
I am trying to find a way to count the total number of pivot fields in a pivot table so I can remove ghost pivot items that are no longer in the pivot table data. My code for this subroutine is as follows;
Sub RemoveGhostPivotItems()
Dim ghost As PivotItem
Dim pt As PivotTable
Set pt = ActiveSheet.PivotTables(1)
pt.ManualUpdate = True
For Count = 1 To 10
On Error Resume Next
For Each ghost In pt.PivotFields(Count).PivotItems
ghost.Delete
Next ghost
Next Count
pt.ManualUpdate = False
End Sub
My code makes an assumption that I have 10 Pivot Fields or less. It would be nice to actually know the number of Pivot Fields so my "For Count" Loop would be more efficient. In otherwords;..............
1. I am trying to record a macro where I select a Pivot Table. But in the recorded macro "Pivot Table name" is not recorded neither the Pivot Field Property only the Range name is recorded. But on other systems (workstations) these details get recorded. Does this have something to do with excel settings?
2. I uploaded a macro enabled excel file on my company's "sharepoint" the drop down boxes present in the file get populated via a macro in "ThisWorkbook" page but sometimes these drop down boxes don't show any values. What can be the reason for this? Can't share the file because of data security policy of my organization.
I'm trying to loop through all pivot fields in a table and change the format to be 0 decimals and comma seperated.
Here's my
I have a question regarding pivot tables. how do I hide a field but still maintain that filter? I have a field in the Column Fields titled "International". Right now I've filtered out only the YES entries, but I don't want to see a "YES" column beside each. When I try to hide the column the filter is reset and all entries, international or not, are seen. Can I hide the column but maintain its filter?
View 6 Replies View RelatedI was wondering if it were at all possible to add multiple columns to the values portion of a pivot table at once, instead of individually dragging. When you click on them, it auto-sends them to Row Labels, which I don't want. I have a bunch of colums I want to add to Values and don't want to waste a bunch of time dragging them individually.
View 2 Replies View RelatedMy data has a field for "Donor Type." There are about 2 dozen types of and about half of them start with the letters CF. When I do a pivot table, instead of getting 2 dozen rows of data I'd like all the CF donors to be in the same row. Is there a way to do that without changing my data? Some sort of filter or grouping within the pivot table?
View 1 Replies View RelatedI have fields "Day", "Posts", "Impressions" in a pivot table and I need to create a new metric for the average Impressions per Post. Ideally, this new metric should function just like the other fields in the pivot table, and not just static, because I'd like to break it out not just by Day, but also Time, etc.
Day
Count of Posts
Sum of Impressions
Impressions Per Post
Monday
52
1,881,468
[Code] ........
Found what it think is the correct methodology (Pivot table) for doing this, but I'm struggling to apply it.
I have a very simple excel 2007 document that has one column with multiple rows;
blue
Blue
green
red
red
green
Green
blue
red
Blue
blue
Bleue
Rouge
red
Bleue
I would like the easiest way to count the total of each and sort in highest first,
e.g.
red 4
blue 3
Blue 2
green 2
I have written code to add datafiels to pivot table but I need to remove the ones that are their prior to adding.
Does anyone have a technique using vba to do this.
Im using the following VBA code, but the on error resume does nothing, excel throws out the error 1004 "Unable to get the pivotfields property of the pivottable class" (i know why the error is caused and how to fix it but my error trapping wont work). Is there some option which i have turned off which prevents me from trapping errors?
Dim ws As Worksheet
Set ws = Excel.Sheets("Sheet1")
On Error Goto err:
If ws. Range("IV1").Value = "dog" Then
ws.PivotTables("PivotTable1").PivotFields("Price Euros").Orientation = xlHidden
Else
ws.PivotTables("PivotTable1").PivotFields("Price Dollars").Orientation = xlHidden
End If
err:
msgbox "invalid"
Basically I've jumped straight in and have tried to recreate a report I need to produce which requires a pivot table. I have managed to create the code I need to produce a pivot table in a new sheet with all of the headers available for analysis. Where I'm struggling is in getting the pivot to show the datafields correctly.
The list that I am creating the pivot from has about 30 headers. 20 or so are analysis fields with the remainder being various figures; monthly plan, monthly actual, monthly variance etc..
The pivot table I need to create needs all analysis fields available to the end user for manipulation, which I have managed to do. I have created rows for sales areas, also with no problem. It also needs the above plan, actual and variance fields in columns and as datafields. This is where I'm having trouble. When I create the pivot manually it ends up with 1 row and 3 separate columns with summed data in each. I have checked the VBA code, copied it and used it again. The pivot table comes out with 1 row but with the data fields stacked one on top of each other. Any minor alterations that I can think of, (for example adding a position = 1, position = 2 etc.), either creates a chaotic looking sheet or an error.
I've checked various posts on pivot tables but am having trouble understanding the way in which I can correct this. Is there a straightforward command that I'm missing? Do I need to start declaring variables for pivot items?
I'm trying to create a pivot table, but there is a problem. Although my data only has 2 years (1996 and 1997), it creates a new year it calls "blank," and a lot of the data that is supposed to be under 1996 and 1997 appears under this "blank" year. How do I fix this? See the attachments for the data and pivot table.
View 2 Replies View RelatedI have pivot tables in diff pages
im trying to make a button to reset all the fields in all the pivot tables..
i tried recording a macro to do this but it only works for page fields..
it wont work for the column fields.. act, adopt and check are page fields at the top... region is a column field ... goto_AQcheck is a macro to switch to that sheet which is assigned to another button....
this isthe code it gave: