I need to format some information in an Excel file, before exporting it. All the pivot table information I have found online is primarily for account management, using counts and sums. The data is currently in this format:
DEV#WIRE#SWITCH-1A123AMP-1A124AMP-1A125AMP-1A126SWITCH-2A127
I need to sort it into this format in another sheet or another area in the same sheet:
DEV#WIRE#1WIRE#2WIRE#3AMP-1A124A125A126SWITCH-1A123SWITCH-2A127
On a worksheet, I created:
- a list of data
- a pivottable based on these data
When moving this worksheet this worksheet to another workbook, the pivot table can't refresh anymore. This throws an error message "Reference is not valid". To work around this problem I need to adapt the datasource. The same occurs if the list and the pivot table are on separate sheet, with the added strange behaviour that, when data an PT are split, it is not possible to move both sheet together.
This would not be a big issue if my problem had to be solved manually. The real problem is that I need to move the sheets from a C# program.
I have a pivot table and if i select my headers i have the availability to sort a-z and z-a plus manual ...manual says to drag the item where i would like it... I have tried the excel database..they reference manual sort but really give no explanation.
Scenario.. I want to sort a-z.. then manual sort a few items to the top of the list..
I have a table that looks like this:
Code:
TechNum | FirstName | LastName | System | WorkDate | Values
I need the pivot table to look like this:
Code:
-->System
--> TechNum - FirstName LastName
--> WorkDate
I need the sorting to look like this:
Code:
-->System
--> TechNum
--> WorkDate
How do I show the first three fields in the same level of the pivot table and still maintain the sort cascade?
Everyday I've to make Pivot Table from Data given by Branch Manager. When I create Pivot, my Row Label comes in order like
ICV TRUCK
LCV BUS
LCV TRUCK
MCV BUS
MCV TRUCK
PICKUP &
SCV shown in "automaticPivot" sheet in attached file. Later I arrange it in order of
MCV BUS
LCV BUS
MCV TRUCK
ICV TRUCK
LCV TRUCK
PICKUP
SCV by dragging manually everyday shown in "desiredRowLabelSort" sheet.
Is there any way that sort Row Label automatically instead of manually OR any other faster way than doing manually?
I wonder if someone can tell me if it is possible to sort rows in a pivot table based on a range in the same workbook.
I have the pivot table set up as I need it but the values in the row change each time the macro is run (it is run when new data is added)
As part of the macro a list of Grades is imported into the Workbook. These grades are always imported in the correct order. As such I would like the pivot table to follow the order of imported grade list. The grades in the list will always be the same as the list in the pivot table.
Is this something that would be possible to do?
I need to put a worksheet together that has multiple columns that I can then sort in order (on any one columns that affects each row together) in "vehicle type".
I want to set it up so the full listing can be sorted top to bottom in colour or then click sort to sort in MAX SIZE and or again sort in SPEED. (So sort in Alpabetical order or by value).
I havent used pivot tables before and assume its the best way. I dont want to use the filter system to sort as its too clumsy for the end user.
sort>sort>sort>sort>VEHICLECOLOURSMAX SIZESPEEDA9brown50100PRONTObrown100110VELICITOgreen200120
SPECIALpurple50155ZEROpink2585GREENVgreen5155MIDEOblack2000135DELVOpurple300155ASPIROblack6155
attached is a spreadsheet 6 people in my area use daily(ive copied and pasted the sheet in question to a new worksheet, as the file was too big). Ive been trying for about 3 days now to make a pivot table to summarise this data.
View 6 Replies View RelatedI've got a group of data within a pivot table that I want to be sorted based on only part of the string. For example,
Standard Kitchen
Standard Master Bath
Standard Hall Bath
Optional Kitchen
Optional Basement Bath
First they would be sorted by whether they begin with Standard or Optional. Then within those groups, they would be sorted whether they contain Kitchen anywhere in the string. So that the order would be Standard Kitchens, Standard Anything Else, Optional Kitchens, Optional Anything Else.
I have entered a custom sort order under 'first key sort order,' but the field is not sorting according to the list.
I'm sure I entered the list correctly, because I actually entered it a long time ago, and it was working for a while. However, today the underlying data was temporarily erased, and the pivot table, when refreshed, basically went blank. I restored the data and refreshed the table, but this field is back to sorting in the wrong order. Refreshing the pivot table and re-choosing the appropriate sort options do not work.
Is there a way to generically sort all pivot rows of a pivot table alphabetically each time the table is refreshed? I have a pivot table that pulls its data from a dynamic named range on a separate worksheet. As users add data to the range and refresh the pivot table the newly added items appear at the bottom of the table rather than alphabetically. I know how to specifically call out a pivot row and have it sort alphabetically (see code below) but I still want to allow users the flexibility of changing the fields and order of the pivot rows so specifically calling out a pivot row by field name isn’t going to work. I need to somehow add code that says: For each pivot row (1 to n, where n = number of pivot rows) sort each in alphabetical order.
ActiveSheet.PivotTables("ptDWDM").PivotFields("Project Name").AutoSort _
xlAscending, "Project Name"
So in the above code I don’t want the reference to “Project Name” to be hard coded.
Im using a pivot with 2 rows entrees and 1 column entree. I would like to sort my data from the biggest value to the smallest. It works for the first group, but when i sort the second the first change aswell and mess with my data.
View 1 Replies View RelatedI have enable Refresh on Open for my excel pivot table, but user need to click "Enable Automatic Refresh" , only solution i came across is to change the registry setting. Which i dont have access to edit registry(admin disable the access).
Alternate solution i try to use Access macro to automate the process and use Outputto save it as a excel file A. Then use excel file B to update pivot table from excel file A.(as excel A data is always latest)
The problem is i will get "....A file name already exist...do you want to overwrite.." prompt.
Which defeat the automate process.
Any other solution to enable the automatic refresh on open the excel workbook?
Or Access can overwrite the exist file or save it as another file name with timestamp ?
I manage a team that quote for business. They are targetted on number of quotes per month but then also wins per month, however a win may come a number of months after the original quote was generated.
They work off a spreadsheet where they log:
Quote date (And month)
Quote Value
... customer info etc
Win month (against orginal quote information)
Win value (against orginal quote information)
I started writing my pivot using the Quote month as the main reference point, IE Quote Month in the Row, and then put all the data in the central drop data section... However, there are two immediate problems with this:
They are targetted on quotes generated per month, some business won has come from last year, which they are lifting from the old spreadsheet and puttin in my new one... meaning that quotes they generated in Oct 2012 are now showing up as quotes for October this year.
If the wins span a number of months they are showing in January (if quoted in January) and not in March (when actually won)
Is there a better way of writing my pivot table??? There must be... ideally what I would like is half the table referencing the Quote date and half referencing the order date... but I don't know how to do this? I could probably do this with pages but I would like to show all on one sheet...
I was wondering if there is any way possible to link your pivot table filters to filter the data the same way in the table that it comes from? So if i had date as one of my headers and i filtered the date to a specfifc date, is there a way to also filter the date in the data source sheet?
View 2 Replies View Relatedi have a pivot table an extract of each data contained in this table.
[img]Count of NAMdate
SERVICENAM12-oct10-déc11-décGrand Total
Commercial-lauralaura11
Commercial-laura Totalgh11
custody-jonathanjonathan112
k11
custody-jonathan Totalgh1113
settlement-ludovicludovic11
settlement-ludovic Totalgh11
SPQC-elodieelodie112
SPQC-elodie Totalgh112
Grand Total1337
The first sheet is the row data given to me, the second one is where I want my data to be analysed automatically by macros.
I managed to create a pivot table manually to give me the info I want but then I still have to copy all the results from the pivot table sheet to my analysis sheet.
How can I create a macro able to do all that by it self? I tried to record a macro using the recorder but then when I try to play it it gives me an error straight at the beginning in the definition of the pivot table I think.
An example of what I want the pivot table to do is:
in the first sheet, go in the small table in column K and L, take the value of L1, then in the row data in column A to J, in column C look for the value in L1, once found, look for the value 1 in column J then do the average on the values in column E and put the result in my second sheet in cell F5
then do the same but look for 2 in column J and put it in F8, then 3 in F11, ... until 7 found (the data is in ss.000 and so the results in the second sheet should be formated the same way)
then do the same all over again for value in L2
etc etc etc
this should be done for the 6 values in column L, each having values up to 7 in the J column.
Then I need to do the same for other columns and not only averages but minimums as well but I can adapt the code I think.
I have a spreadsheet with 3 tables (all side-by-side). Table one has 8 rows of data; table two has 2 rows of data; table three has 3 rows of data. I am looking for assistance on how to sort each table in desceding order (by sales). Basically I want to do a sort everytime there is a change of values in any of the tables. I have attached a sample spreadsheet to clarify the table layout and the manner in which the values change within each table.
View 2 Replies View Relatedam working on a spreadsheet that requires sorting a list of names and numbers. The numbers have a sum formula attached. I can set up the macro to sort the list fine by selecting the appropriate cells and creating the macro.
The code for this is below
Sub SurnameSort()
'
' SurnameSort Macro
' Sorts by mechanic surname
'
'
Range("A10:H13").Select
Selection.Sort Key1:=Range("B10"), Order1:=xlAscending, Header:=xlGuess _
, OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
End Sub
However, I want the macro to still be able to sort the data when I add new rows to the list later on. In other words, the code above in bold somehow needs to be modified so that "H13" extends as far down as needed.
I'm trying to write a macro that will create a pivot table, and am getting an Error code 1004: Cannot Open Pivot Table Source File "Sheetname". My code is below. I've tried to note what each section does, and it all seems to work well except for the Pivot Table creation.
View 14 Replies View RelatedI have a worksheet with two pivot tables, one of which is visible to the user. Ideally, the user should be able to change the "Row Label" field settings of the visible pivot table and then press an "update button" that then adds the same field to the second pivot table.
Ideally, the ordering of the fields should also be made similar between the two tables, though this is of less priority.
I imagine it would be something in the style of:
"If number of Pivot1 active row label fields = X then
Pivot 2.AddRowLabelField = Pivot1.RowLabelField(X)
end if"
My problem this time is in regards to auto sorting a table as data is changed in another worksheet and is auto copied within the said table.
I.E. I need the Fax page (second last), the table has to auto sort based on column " C ". This is easily done using custom sort but can it be done automatically ? I want to lock the page so nobody modifies it.
I attached a copy of my work so far, using Excel 2007.
All the sheets are locked except " Player DATA " and " Fax ".
The password is " Moose ".
I am trying to sort a table of data by "Status" and automatically populate another Sheet. In Sheet 1, I have data as follows:
Issue Status Issue - 1 Open Issue - 2 Closed Issue - 3 Closed Issue - 4 Open Issue - 5 Closed Issue - 6 Open
I want Sheet 2 to automatically sort this information by Status = "Open".
Issue Status Issue - 1 Open Issue - 4 Open Issue - 6 Open
How I can accomplish this by Excel functions (I do not want to use Pivot table)?
I have data that develops 3 to 4 pivot table each day. I would like to know if there is a way to change the date on one of the pivot table and have the other pivot tables date change to match with the first pivot table. At this time I am going to all 3 or 4 pivot table to select the correct date. The date is in the page position of the pivot table. I have attached a small sample of the data and the pivot tables.
View 2 Replies View RelatedI have created a pivot table that is connected to an input sheet with data. The input sheet retrieves data automatically from a external source through an add-in to Excel. When updating data the fields expands, but only for the items which have been changed. I want the table to be updated automatically, but not the fields expand automatically. Is there any pivot options to prevent this problem?
It should be mentioned that the pivot table is not directly connected to the input sheet (which is updated from the external source), but from a "help-sheet" reflecting the input sheet with some additional columns. I use conditional formatting and name range in the pivot.
vba in excel 2013 pivot table that updates from an online CRM rows are a to h and it can be any number of rows. What I am trying to do is track progress. In column f values indicate probability for success 10 25 45 90, which can go up or down. The pivot table is refreshed to get the latest values from CRM. the update is handled by a connection to the crm not in the vba.
So far I been researching methods to conditionally format values that went up, down or remained the same since the last refresh with up down and across arrows. I have managed to piece together what I think should work but alas it is not. So I have come to you internet.
My code first clears any formatting and goes down the column avoiding null or empty cells, comparing the values in column f to values in column j.
I have 3 conditions greater than, less than or equal to, and would like add an icon for each based on the result of the comparison.
Finally when it finishes the column the code copies the current values in the pivot table column f to column j outside the pivot table which i hope to be able to hide once the cf works. The code is below
[Code] .....
is there any way to NOT Displaying Items with No Data when filtering data in my pivot table?
For instance, I have 2 report filters: Category and Subcategory, when I select a category in the first filter I want to see only the options of subcategories with data in the second filter, I mean display only the subcategories of the Category previously filter.
Same scenario I have with a report with Directors and Organizations, when I filter one Director it would be nice to see only the organizations of this director and not all options on the data.
I have a excel sheet with following 4 columns
Division Name:
Location Name:
Transformer capacity:
Transformer earth resistance:
Now how can I get answer of following queries in Pivot table. (Excel 2007)
1. % of a particular capacity of transformers in a division say % of 400 capacity transformers in all divisions.
2. % number of transformers having Transformer earth resistance value above a particular value in all divisions. Say % of Transformers having Transformer earth resistance above 2.6 in each division.
I'm using Excel for bookkeeping and balancing a budget. I've created one sheet for all my raw data and the other is to summarize the data using a pivot table. On the raw data sheet I have labeled my columns for the pivot table. I was hoping that in the pivot table I can select a year and have all the months for that year and data of that year be available, but not other years. I was also trying to have only the month selected of a year selected and that data be available. I also wanted to show an accounting of money spent by item.
Instead, I have a pivot table that is confusing and very unattractive. The example of this will show my limited knowledge in pivot tables. I'm hoping some of you more affluent "guru" members may be able to help me get something usable and presentable.
I tried creating a dynamic named range for the pivot table "BookKeeping" and a dynamic named range for the money out and money in "Accounting", but I'm not sure if I did that right. I did this because more columns will be added over time. This is the reason I'm asking the above two paragraphs.
Should I be using filters some how?
The Summary Sheet also has the balance of available funds that I'm somehow looking to include in this pivot table. Can the pivot table keep a running balance?
Data Analysis . I have 7 tables gathered in one spreadsheet but in seperate sheets. Tables have the same columns but different data baceause they come from different locations. Now I would like to create pivot table to combine data from all 7 tables. I read a little and I got to know that relationships is needed between the tables but I can't create it because I don't have unique data in the table. Usually tables consist repeating names, locations, some numerical data.
For example every table consists worker's name. I create pivot table from one of 7th starting from worker's name in row field and put some data in value field. Then I add another workers from another table. I can do it but when I put in row field I have workers from second table under those from first one. And of course data are badly calculated. I would like to have all workers in row field with proper data. It means one column with all workers from all 7 tables an then some their data
I know I can copy all of them into one big table and then create pivot table but this is solution what I wanted avoid. I know it will work but these data can change from time to time and it will be very hard to maintain spreadsheet. When data will change I will have to copy manually .Is there any solution to create such a pivot table from multiple tables sources but with the same column structures?