Pivot Time Series With Two Different Categories
Dec 29, 2013
I have a series of up to 40 or so entries for given dates. These entries are categorised by either "bid" or "offer" and I'm trying to find a way to chart them both using a pivot table. I'm stuck as it seems that a pivot can only count the number of bids and offers on any given day, but it cannot differentiate between them.
Note: that the original list the pivot depends on will constantly be updated so I can't just develop a custom chart.
I've attached a spreadsheet with an example of what I'm playing with. Pivot graph is in "PIVOT" worksheet, data is in "DATA".
pivotland.xlsx
View 6 Replies
ADVERTISEMENT
Jun 24, 2008
I have a list of data on one sheet and a 'reports' page on another sheet. The reports page has several pivot tables and a pivot chart. I want the pivot chart to format the bars on the chart relevant to the series name. The series names are "R" "A" amd "G" for Red Amber and Green respectively, I want the chart to change the colour of the series so that it is the correct colour ie. "R" would be coloured Red, "A" would be Amber and "G" would be green.
Sub PivotLoader()
Dim Red As Integer
Dim Amber As Integer
Dim Green As Integer
Red = Range("H9").Value
Amber = Range("H10").Value
Green = Range("H11").Value
Range("B8").Select
ActiveSheet.PivotTables("PivotTable4").PivotCache.Refresh
Range("D25").Select
ActiveWindow.SmallScroll Down:=18
Range("B49").Select...........................
View 2 Replies
View Related
Apr 28, 2014
I have a list of customer satisfaction scores that are pulled in from a sharepoint list. The list is then used to create a pivot chart that is used in a web part on a dashboard in sharepoint. The chart is supposed to show average customer satisfaction scores per category per month.
The problem I have is that I can't filter the categories using a slicer, I can only filter the categories' values (i.e. the scores). I can filter by date though.
When I try to filter the various score categories/series (Support, Change Management etc) I only get the option to filter their values i.e. 1,2,3,4,5.
I want to be able to use a slicer or similar to be able to display either all of the series or just selected ones.pivottable.JPGpivotchart.JPG
View 14 Replies
View Related
Mar 17, 2008
I can not get my Pivot Chart to count, sort and categorized my data. I have included a sample file for your viewing. I basically want the data in cells C2:E18 counted, sorted and totaled by categories and locale. I thought the pivot charting was simple, but I'm having quite a challenge with this one. The pivot chart data should reflect as my sample indicates in cells E24:K27
View 3 Replies
View Related
Jun 19, 2009
I am using a pivot table to summarise information with a list of tonnes and sources from civic amenity sites. All was fine until I got to this month to do monthly reports. The pivot table appears to be treating what appears to be exactly the same categories of "CIVIC" and "TRANSFER" differently. By this I mean that although the values in the column appears to be "CIVIC" or "TRANSFER", some get treated differently in the pivot table making it pretty useless. I have made sure that all spellings of the words are the same. there are no spaces before or after the word e.g " CIVIC" but to no avail!
View 4 Replies
View Related
May 29, 2012
Is it possible to aggregate data in a pivot table from different categories?
I have excel 2003.
For PURE illustration, I have 6 columns, A-F, respectively:
"TV Show", 4 columns for names of people who watched the show (Persons 1, 2, 3, and/or 4), and finally, the duration / "Time" of the show.
I want to see in a final output:
Anytime a person has watched the show (whether i have penned him in columns 1, 2, 3 or 4), Excel to aggregate the total hours watched by that person.
When i try to do this with my pivot table i run into an error: if Person A watched "TV Show X" in row 1 and his name is in the Person 1 Column, Excel will not aggregate his TV time with "TV Show Y" in Row 2 when his name is in the Person 2 column.
It will sum up the categories separately even if the "Person" inputs in the separate "Person" columns are exact matches.
View 2 Replies
View Related
Nov 2, 2012
I have 2 columns of dates on which 2 separate events occur, e.g columns 1 is dates of receiving incoming calls (and there can be multiple incoming calls , so there are multiple rows with same date) and the other column is dates of outgoing calls (same deal of having multiple rows with same date, each row = 1 outgoing call). I want to plot both as line graphs and find out where they intersect , each one peaks and tapers.
View 2 Replies
View Related
Jan 19, 2013
I have a data set that I'm trying to present in a pivot chart and am wanting to use one series to color code or weight another series in the chart. For instance, let's say I have different product categories and two metrics for each, a profit margin (expressed as a %) and a revenue figure (expressed as $s). I want the height of individual bars to represent the profit margin but have the level of opaqueness represent the revenue figures...ie the more revenue associated with a product the more opaque it becomes.
View 6 Replies
View Related
Mar 12, 2008
I'm trying to format the color of the data series in a graph that was produced from a pivot table. The pivot table contains a count of each traffic light in each project phase. eg.
. Traffic Light
Phase Amber Green Red Total
Initiate 1 3 2 |6
Design 5 3 |8
Implement 3 5 |8
---------------------------------------------
Total 4 13 5 |24
From this I have created a bar graph. (graph does not represent above data). Now, I'm trying to get each data series to represent their own colour. Instead of the default formatting. Cause every time I click on refresh data on the pivot table, it resets it to default.
ActiveChart.SeriesCollection(1).Select
With Selection.Interior
.ColorIndex = 45
.Pattern = xlSolid
End With
ActiveChart.SeriesCollection(2).Select
With Selection.Interior
.ColorIndex = 43
.Pattern = xlSolid
End With........................
View 3 Replies
View Related
Mar 26, 2008
I'm trying to calculate and average using a time frame in the day. I want to use a certain number "X" that correlates to a hour/minute in the current time. How do I write a statement to get me the correct "X" value?
example:
8:00 .005
8:01 .006
8:02 .0075
8:03 .0077
8:04 .008
time now is 8:03
How do I get the .0077 in excel?
View 10 Replies
View Related
Aug 21, 2007
I've got two time series (growth rates: what was the forecast for any particular year and what was actual growth rate for that year). I need to compare them to flag those most different. Actually I want to check the accuracy of the forecast. What would be the best function to do it?
View 5 Replies
View Related
Jun 1, 2008
I attached the excel file with two time series data next to each other – the price and an indicator data. I have to automatically identify when the two time series DIVERGE from each other. Diverging occurs when the price makes a new high and the indicators doesn’t make a new high (called “bearish divergence”) and also when the price makes a new low and the indicator doesn’t make a new low (called “bullish divergence”). I attached the two pictures I made to demonstrate these two divergencies.
To spot the divergencies one would go through the price data – finding new highs and lows and then compare each consecutive high and low with the corresponding reading on the indicator field to see if it is also making new high or low. There would be a minimum and the maximum of data points to look back – that would ideally be configurable from a separate input cell. The problem is that I do not know how in principle such task should be approached - is it best to make a macro or can this be done through a series of formulas each building upon the previous?
View 6 Replies
View Related
Oct 24, 2007
I am trying to plot two data series in one chart. The first series has monthly corn prices for last 10 years (~130 data points). The second series has bimonthly chicken prices over the last 10 years ( ~72 points). How can I plot them together?
The bi-monthly periods for the second series do not exactly coincide with calender months ( e.g. Aug 19 to Oct 13, 2007). As a result, I can not adjust the points to match with calender months.
View 2 Replies
View Related
Apr 21, 2008
I just joined ozgrid and this is my very first post. I have read the rules but spare me if I make some errors.
My question is related to plotting time series charts using VBA. I have data in the following format.
04/21/08 9:04:47 4.5055
04/21/08 9:04:48 4.5055
04/21/08 9:04:49 4.5055
04/21/08 9:04:49 4.5055
04/21/08 9:04:50 4.5055
04/21/08 10:05:00 3.5055
04/21/08 10:05:32 3.5055
04/21/08 10:05:40 3.5055
04/21/08 10:05:48 3.5055
04/21/08 10:05:51 3.5055
04/21/08 11:07:59 5.5055
04/21/08 11:09:00 5.5055
04/21/08 11:10:01 5.5055
04/21/08 11:11:02 5.5055
04/21/08 11:13:08 5.5055
04/21/08 11:14:11 5.5055
04/21/08 11:15:16 5.5055
The column on the left is NOW() output and the one on the right is data corresponding to the given date and time. You may interpret the above data as snapshots taken at regular time intervals.
Now what I want to do is make a chart with the above data. Where ever there is a break in the snapshots, represented by a blank line, I want the graph to jump to the next data point much as the way stock prices move from the closing price to the opening price on the next day. I am not able to figure how to do that. Since I want the x-axis to represent time, using scatter charts does not work since the intervals are not proportional to the time then.
View 9 Replies
View Related
Jul 27, 2014
I'm trying to create a spreadsheet for irrigation system program times. Each program has a start time, say 2 a.m. Multiple zones then run for varying times in a cycle. I need to add the run time to the start time to produce the next start time, and continue that through many zones. I can get the first few by simply formatting the cells as ##:## and using =F2+G2 (the start time is in F and the run time is in G) using 20 minute run time as a test. But when it gets to the third zone, my results show 2:60 a.m. and all results are incorrect from there on. Is there any way to do what I need in Excel?
View 2 Replies
View Related
Dec 21, 2006
I have been browsing here off and on, and have found many excellent answers. I use Excel to process data on time series, as an adjunct to consultancy work on statistical analysis of industrial data . Usually the data has irregular gaps, e.g., daily data might have 2-10 day gaps. If I want to take, say, 7-day averages, SKIPPING OVER gaps longer than 2 days(say), is there an easy way to do this (I don't really know VBA,and it is not worth my time to try and write long code for this, which will eventually be done by some professional programmers)!
View 9 Replies
View Related
Aug 9, 2008
i have a time series of data at one hour interval ( from 6:00 hrs to 18:00 hrs ) each day and again from 6:00 to 18:00 hrs next day and so on for several years. in this series many data are missing. i ve to fill in these missing data in such a manner so that the new values becomes the linearly interpolated values in between the data given at any two hours. no rows are allowed to be inserted in between 18:00 hrs of the previous day to 6:00 hrs on the next day. pl see the attatchment.
View 2 Replies
View Related
Mar 1, 2014
I need to calculate the INTERCEPT and SLOPE of following daily stock prices, but 60 days before the announcement days. Its for my dissertation and Its the first time i have to work with that much data. Event study.jpgEvent.xlsx
View 6 Replies
View Related
Apr 24, 2014
I have a chart with 5 different series. Instead of editing each one, say the marker size, is there anyway I can change the marker size for all of the different series at the same time?
View 1 Replies
View Related
Mar 1, 2014
I need to calculate the INTERCEPT and SLOPE of following daily stock prices, but 60 days before the announcement days.
My data is organized like this
60 days before
25/05/07
-
20/03/09
-
23/11/03
[code]....
View 1 Replies
View Related
Jul 6, 2014
I've been trying to get a graph that looks like the image below for a while now and can't seem to get it to appear how I want. I am looking to duplicate it exactly, but the issue I'm having is getting the individual bars to be separate and appropriately spaced.
[URL] .....
View 7 Replies
View Related
May 22, 2014
I'm having some problems with the removal of duplicate values in a time series. The time series consist of stock data for about 10000 firms, but about 3000 of these firms died(delisted) before the end of the sample. The database I used to extract these data, however, does not remove the firm values from the sample, but keeps the last known value of the firm for the remainder of the time. Therefore, I need to remove these duplicate values, but only if they are sequential. Furthermore, normally if you remove duplicate values, excel will delete the cell and shift the data upwards, since it's a time-series I would rather have excel just blanking out the cell instead of removing it.
I've looked at normal solutions, like using the countif functionallity in excel, but this is not feasible because of the size of the worksheet, also, it does remove non-sequential duplicate values as well.
summary:
- Want to remove duplicate values, but only sequential values.( It's possible firm value is the same somewhere in the time period)
- The cells should be blanked out instead of deleted.
View 2 Replies
View Related
Jan 8, 2014
I have A:1 - X365 filled with hourly energy prices for 2013. I need to convert these to a single column - A1:A8760. I have tried writing some code and some macros with no success.
If I were to do it manually 365 times, the macro would look like this:
Copy Row A1:X1
select sheet 2
Paste Special > Transpose (fills A1:A24)
repeat for rows 2-365
Tried using this from a previous post, but it takes A1:A24 then B1:B24 and so on and makes them a single column - so it doesn't work unfortunately.
Sub MakeColumn()
Dim rng As Range
Dim LastRowSrc As Long
Dim LastRowDst As Long
Set rng = Worksheets("Sheet1").Range("A1")
[Code] .....
View 3 Replies
View Related
Aug 4, 2014
I run a large simulation experiment. I have a loop plotting data in excel of a user defined area. Because of the limit of 255 series I have allowed a maximum of 250 simulations (they all need to be plotted). But the length of each simulation is free. I know there is a limit of 32.000 data points in a graph and I have this as a condition too.
If I set the data range to 100 columns and 3000 rows the graph is produced when I plot by columns. (code below)
But if I set the data range to 250 columns and 1000 rows I get the above mentioned error message. Even though I only have 250 series.
After the data is plotted it is the code below that gets the error:
[Code] .....
View 1 Replies
View Related
Dec 22, 2011
I have the following code:
Sub Macro5()
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveChart.SeriesCollection(1).Delete
ActiveChart.SeriesCollection(2).Delete
End Sub
However, if there is no SereisCollection(1) actually present in the chart I get an error. How can I work around this? I will need an IF statement I assume, just not sure what it will look like.
View 4 Replies
View Related
May 31, 2008
I just recently installed Excel 2007 and I would like to know if it's possible to change all data points of a chart at the same time. In Excel 2003, I would normally hold down shift while clicking on each of the data points to make a global change. However, it appears I cannot do that in 2007.
I would like to display each data point's series name. When I go to Layout on the Excel Ribbon, and click on "Data Labels", and click on "More Data Label Options", the actual Y-axis values are shown for each data point. However, I do not want this - I actually only want the Series Name, but when I uncheck "Value" and check "Series Name" instead (under "Label Contains"), it only changes it for one of the series. Is there a better way, instead of going through each and every single series to make this change?
View 4 Replies
View Related
Aug 21, 2006
The following code is supposed to produce six series on an xlXYScatter chart. It produces seven with the seventh series being a repeat of the sixth but named series 7.
Sub Chart2()
Dim DataRange As Range
Dim CellString As String 'Stores a cell range in the form "AA27:AB39"
Dim CurrentSeries As Integer
Dim SeasonCount As Integer
Worksheets("Hemisphere").ChartObjects(2).Activate
CurrentSeries = 1 ............
View 9 Replies
View Related
Aug 22, 2014
I consider myself decent at Excel, but I don't have quite the depth of knowledge I would like. Here is my issue:
I currently have a series of 50 numbers for each row on a 300 row spreadsheet. I would like to write a formula that identifies the six largest numbers in that series and adds them together. So, for example, if the series was 8-6-4-4-4-5-1-1-0-15-3-9, the formula would spit out 47 (15+9+8+6+5+4)
How do I write that kind of formula?
View 8 Replies
View Related
Sep 21, 2011
I would like to have two series of data using the same X axis (date, formatted in months). The Y axis is in intervals of 100,000.
The first data series is historical (actual) data (i.e. Jan 2009 to August 2011). The second data series is forecast (Sept 2011 - August 2012). So i want the forecast series to start immediately after the historical series. It is a 'line with markers' chart. The key objective is that the forecast data looks visually distinct from the historial series.
Excel version: Excel 2010
OS: Windows 7
View 5 Replies
View Related
May 15, 2008
I'm using the following code to set the colours of the slices of all the pie charts in my spreadsheet based on each slice's legend's label: ....
View 9 Replies
View Related
