Adding Series Of Runtime To Start Time
Jul 27, 2014
I'm trying to create a spreadsheet for irrigation system program times. Each program has a start time, say 2 a.m. Multiple zones then run for varying times in a cycle. I need to add the run time to the start time to produce the next start time, and continue that through many zones. I can get the first few by simply formatting the cells as ##:## and using =F2+G2 (the start time is in F and the run time is in G) using 20 minute run time as a test. But when it gets to the third zone, my results show 2:60 a.m. and all results are incorrect from there on. Is there any way to do what I need in Excel?
View 2 Replies
ADVERTISEMENT
Aug 21, 2006
The following code is supposed to produce six series on an xlXYScatter chart. It produces seven with the seventh series being a repeat of the sixth but named series 7.
Sub Chart2()
Dim DataRange As Range
Dim CellString As String 'Stores a cell range in the form "AA27:AB39"
Dim CurrentSeries As Integer
Dim SeasonCount As Integer
Worksheets("Hemisphere").ChartObjects(2).Activate
CurrentSeries = 1 ............
View 9 Replies
View Related
Jul 11, 2007
i am trying to both identify the start date and the end date of a series in excel.
if you will, picture a spreadsheet with two rows with data. the top row is comprised of dates in mm/dd/yy (end of month) format. the bottom line is percentages . . . a corresponding % for each date directly above. these percentages add to 100%. in two separate formulas, I would like to identify:
1. the date in which the first %>0 occurs (start date)
2. the date in which the cumulative addition of all months %'s equate to 100% or the date in which the last %>0 occurs (end date)
keep in mind many if not most of the %'s will be 0%.
View 13 Replies
View Related
Apr 16, 2014
The formula used to create the marked series line.
Code:
=SERIES(Rolling_window_data!$B$2;Rolling_window_data!$A$3:$A$122;Rolling_window_data!$B$3:$B$122;1)
The statistics in Rolling_window_data.
I need the marked line to be different from/to a point in time (x scale), depending on the backfill date in Rolling_window_data. All the contents are generated programmatically so the backfill date cell with a value will almost always be different. From what I've researched, I should make 2 series that overlap each other (in the current case, the 1st series should end on line 27 and the second should start from line 27 and continue to the end). The start is always line 3 and the end is always line 122.
How do I dynamically set the series start/end so I can make them overlap each other? I'm assuming I should add some kind of 'IF Statement' to the series code but I'm very new to excel formulas.
Code:
=SERIES(Rolling_window_data!$B$2;Rolling_window_data!$A$3:
IF(FOR Each Cell in Range("D3:D122") cell.value #N/A, Cell, "D122");Rolling_window_data!$B$3:$B$122;1)
View 2 Replies
View Related
May 3, 2009
I have different series number from column B to Q in Data Sheet, what I want is see strat and end range in temp sheet and delete(Shift xlup) numbers from Data Sheet from col a to q. If Series is like .....
View 9 Replies
View Related
Dec 19, 2008
I have a worksheet which contains START TIME in column A, then TIME USAGE in column B and END TIME in column C. User enters start time, followed by the number of time usage in minutes, how could i possibly display the end time automatically in this scenario? how do you add the entered time usage to the start time to display the end time? Say if I enter 1:00 AM at start time and 00:15 minutes on time usage, how can 1:15 AM be displayed on the end time automatically?
View 2 Replies
View Related
Jan 18, 2008
I have a excel sheet of data numbers which blongs a packet of inventory where i found number series like this:
Start Range End Range Qty
2101200 2101499 300
I have to draw this onto a series like 2101200 then 2101201 then 2010202 etc.
but some time these numbers are in qty 30000 or more. I have questions
1- If any macro colud fill series suppose if write number in A2 and qty in B2 so it reads the qty of b2 and fill the series in A. If i write 1 in A2 and write 50 in B2 so the series should be auto fill 1 to 50.
My Second question is opposit of my above question.
2- if i have different number series in column a and i want them to be as start number in column b and end number in column c and qty in column d based like mentioned below example.
Series [b]Start Range End Range Qty
1 1 1 1
3 3 3 1
5 5 7 3
6
7
View 8 Replies
View Related
Mar 3, 2009
I am trying to provide a tool for department leaders to monitor productivity for order processing in their departments. The variables I have are: Number of orders(variable), number of pickers (variable), start time(variable). Then, I know each order takes 1 picker 4 minutes to pick on average, and there are 45 minutes worth of breaks during the picking process. So after entering the variables I used =(((C3*4)/60)/D3) to come up with the time needed to process the orders. What I can't get to is how to add this number to the start time, factor in break minutes and get to the projected completion time. I have Excel 2003 at work. Clearly I need to take a class!
View 4 Replies
View Related
May 5, 2006
I have a user form with textBox1 = start time (entered as "[h]:mm") and text Box2 = finish time (entered as "[h]:mm"). I would like textBox3 to display the difference between the start time and finish time as a general number!
For example
Start time: 21:00
Finish time: 06:30
Hours worked: 9.50
Start time: 12:30
Finish time: 23:00
Hours worked: 10.50
View 9 Replies
View Related
Apr 19, 2007
I have some code which adds a series of textboxes at runtime depnding on some info on my spreadsheet.
Due to these textboxes being added programmatcally, they curently have no macro's assigned to them.
I was wondering if there was a way of adding code to the textboxes at runtime.
Dim choosebefore As MSForms.Control
Set choosebefore = Me.Frame1.Controls.Add("Forms.Textbox.1")
With choosebefore
.Name = "Before" & i
.Left = 0
.Top = (((i * 18) - 18) - 8) + 6
.Width = 24
.Height = 15.75
.Visible = True
.TextAlign = fmTextAlignRight
.Text = Chr(149)
.SpecialEffect = fmSpecialEffectFlat
.BorderStyle = fmBorderNone
End With
View 9 Replies
View Related
Jun 19, 2014
I have a userform that time stamps on my userform as soon as i open the form, is there a way that when I submit, that the amount of time that I was on the call to be put in my column on my worksheet as minutes?
View 2 Replies
View Related
May 23, 2007
how to include a line of code, to start a sub running at a selected time? Given that the workbook is already opened before that time?
View 6 Replies
View Related
Dec 25, 2007
Can I adapt this code so that users receive the alert if they try and go to the next field without filling in the required ones, or - better - to combine it with a code that does not run a macro, but instead gives the alert, if the required fields have been missed. (I don't require anything to do with printing, this was the closest code I could find)
Private Sub Workbook_BeforePrint(Cancel As Boolean)
If Sheet1. Range("A1").Value = "" Then
MsgBox "Cannot print until required cells have been completed!"
Cancel = True
End If
End Sub
View 4 Replies
View Related
Jan 12, 2008
I have phone numbers imported from outlook in csv format. Now these numbers are like 2782512512, i want to add Zero at the start of this number. So, it will become 02782512512. How can i do this. Find and Replace method doesn't work.
View 9 Replies
View Related
Jan 24, 2007
I have the following code which puts a series onto a chart
With Charts("Test Chart")
.SetSourceData Source:=Sheets("Data").Range("A1:B" & Nreadings), PlotBy:=xlColumns
.Axes(xlCategory).MinimumScale = 1
.Axes(xlCategory).MaximumScale = Nteeth
.Axes(xlValue).MinimumScale = Miny
.Axes(xlValue).MaximumScale = Maxy
End With
I would like to add a 2nd or third series onto the same chart using the same scale etc. How do I do this in VBA code? Whenever I add another line to add a series it just overwrites the first series I have shown here.
View 9 Replies
View Related
Mar 5, 2014
I'm trying to set up a macro that will capture all the unique values in a column, and then create a new sheet for each value. What I've got so far technically works, but it's also adding an extraneous sheet (with a generic sheet name, not the specified name I'm giving the sheets) and also giving me "Run-time error '1004': Application-defined or object-defined error" when it runs.
View 3 Replies
View Related
Sep 25, 2009
I have a workbook that is generated from the system(AS400)but it wont subtract the time finish -time start. I get a #Value error in the cells I tried two different formulas.
View 2 Replies
View Related
May 3, 2008
This may be a bit vague but here goes.
I have to calculate the difference between the start time and end time of a job. The only catch is, how can I avoid calculating "out of hours" time. So, if a job goes from 9am to 9am the next day, I want it to avoid calculating between the hours of 23:30 and 03:30.
Another example is if a job goes from 02:00 to 04:00, I want it to avoid the tim between 02:00 and 03:00.
If there is a difference in days, so the job goes overnight, how do I take that into consideration also.
View 9 Replies
View Related
Nov 14, 2006
I want to copy and paste a PARTICULAR RANGE from one workbook to another workbook. I want to select the data range from "09:55:00" to "10:00:00" which is in the cells in Column "A" an copy paste it to another workbook. The rows are not constant. The data "09:55:00" to "10:00:00" can e present on any row but is present on the same column i.e "A".
View 2 Replies
View Related
Jun 6, 2014
I want to use 4 toggle buttons to be able to add and remove 4 different series to a chart. When the toggle button is clicked, a specific series is added to a chart, and when it is unclicked then the series would be removed.
The problem I am running into is that unless I add and remove each series in a specific order, I will get an error because I may be trying to remove a series whose series number is not on the series collection in the chart.
for example: if I remove series number 2 with the toggle button for that specific series, then the toggle button for series number 3 will remove the old series 4 (which is now 3), and the toggle button for series 4 won't work because series 4 will now have become series 3.
Therefore, would there be a way to remove a series based on the name of the series, rather than the series collection number?
View 5 Replies
View Related
Jun 18, 2014
How to make fill series number with simple excel formula, like table below :
col.a (desired result)
col.b
1.
john
2.
lia
3.
leo margarette
4.
david lee
etc....
note : not use Vba...
View 9 Replies
View Related
Jul 12, 2007
I have a worksheet where I am collecting data and a seperat Chart. The first part of this code which adds a new row in my table works perfectly fine, but the latter part (based on a macro recording) does not. I need to specify the relevant row for the new series in the bubble chart. The colums are of course the same.
Private Sub CommandButton1_Click()
Dim LastRow, LastRef As Long
'Works!
ThisWorkbook.Worksheets("Projektradar - input").Select
Range("Q3").Activate
LastRef = ActiveCell.Value
Range("Q3").Value = LastRef + 1
View 4 Replies
View Related
Mar 28, 2008
I have a column of times: e.g. 10:03:00 and I would like to add them all up.
=A1+A2 works fine.
=sum(A1:A10) does not.
View 14 Replies
View Related
Feb 7, 2014
the vendor has a 21 hr working window; start from 7am and goes until 4am; Mon to Fri.
Here is a scenario:
- i request for a product information from a vendor on 3-Feb-14 8:00am (Monday)
- he replies with all of the product info on 6-Feb-14 12:00pm (Thursday)
can you find the time in above scenario consideration the working window?
Here is another scenario:
- i request for a product information from a vendor on 6-Feb-14 8:00am (Thursday)
- he replies with all of the product info on 11-Feb-14 12:00pm (Tuesday)
- Sat & Sun are days off but keep in mind that my Friday shift ends on sat at 4am so the networdays formula wont work.
View 2 Replies
View Related
Jun 6, 2014
I have a list of numbers with 2, 3, and 4 digits. Is there a formula that can recognize if there are only 2 digits, it will add 2 zeros in front of the number.
For example,
47 will become 0047
234 will become 0234
1234 will become 1234
View 4 Replies
View Related
May 8, 2014
How to find the elapsed time between two times, but I need the start time in this instance.
Attached is my spreadsheet for a callcenter in which has exported data showing what time the data is exported and how long someone has been their state if they are out of adherence. I have selected fields explaining what I am wanting where on the spreadsheet.
I am wanting to subtract the elapsed time in MM:SS from the End Time which is in HH:MM AM/PM (Imported as text). I do not mind moving these to separate cells to the left to format them correctly, I want to be able to right click in A1, paste, and the rest trickle.
I am having difficulties subtracting the time to get the start time.
Time Conversion (IEX Import).xlsx
View 5 Replies
View Related
Mar 3, 2009
I have four different times on my report, enroute, on scene, clear of scene, in service. I need to make sure that the user's input for each time is < or = the previous time. Also I would like for my time to show in 24 hr format. Do I need to change my clock or can I do it without changing the clock format. users will use the CTRL +SHIFT+: to insert the current time
View 2 Replies
View Related
Feb 6, 2008
I'm not getting that early in the morning
In A1 I've the start time
In B1 I've the end time
in C2 I have a time value ie 6:30 AM
I need a formula IF C1 is between the start time and end time to return the value 1 and if not to return 0
View 2 Replies
View Related
Jul 23, 2014
I have an Excel workbook with two sheets "DataSheet" and "Actual Peaks", "DataSheet" contains a column with dates and a column with values. "Actual Peaks" has a bunch of dates listed in a column. For each date in 'Actual Peaks', another column goes back to the "DataSheet" finds the date, then starts adding values until a specified sum is reached, once the sum is reached, it returns the date at which the sum was reached. However, I have found that sometimes it is off by a day or two.
See the attached workbook for a much clearer example : Excel_forum help 7-23-14 DD validation.xlsx
View 7 Replies
View Related
Mar 2, 2013
I have a userform for a time sheet i am working on. I used the following code to enter the time difference between time in and out.
Code:
'FIRST SET
v = (Me.TimeIn.Value)
w = (Me.TimeOut.Value)
x = Int(v / 100) + (((v / 100) - Int(v / 100)) / 0.6)
y = Int(w / 100) + (((w / 100) - Int(w / 100)) / 0.6)
[Code] ........
The code works fine, however, I have I need to place another time difference in based on from the sameuserform but different comboboxes. I thought it wouldbe easy just to add a second code.
Code:
v = (Me.TimeIn.Value)
w = (Me.TimeOut.Value)
x = Int(v / 100) + (((v / 100) - Int(v / 100)) / 0.6)
y = Int(w / 100) + (((w / 100) - Int(w / 100)) / 0.6)
[Code] ....
When i add the second code i get the runtime error 13. The worse part is that i was going to do this like five times.
View 2 Replies
View Related
