Point To Custom Named File

Jun 15, 2009

How can i change this code to point to a file which is on my desktop which is in a folder called "cell n1" and the file is called "Cell n1"

View 2 Replies


ADVERTISEMENT

Custom Data Point

Apr 24, 2007

If I check the box labeled catagory name on the intial creation or within chart options on the right click menu each data point gets labeled with the name of the catagory.

I would like to label a significant event at one of these data points does anyone know how to do this? If this isn't a built in feature does anyone have a work around that would look good?

View 9 Replies View Related

Have Array Point To Named Range

Aug 21, 2012

Going off this excellent thread : [URL] ....

I'm looking to replace the words in

VB : myWords = Array("dog", "cat", "hamster")

with a named range.

Here is what I did. I added the lines:

VB:
Dim myArray As Variant
myArray = Range("colorbold")

And replaced mywords with

VB:
myWords = Array("colorbold")

Something is clearly wrong.

View 3 Replies View Related

Search File On Share Point?

Jun 20, 2014

I need to read an excel file on share point. The file name is like 'file_name.Vx.x.xls'

Where x.x is an incremental and can change. How can I retrive the correct name?

View 1 Replies View Related

Dynamic Starting Point For Dynamic Named Ranges

Jun 21, 2009

I would like to replace the blue bit of this Dynamic Named Range (DNR) with an INDIRECT formula in order to modify the starting point for the DNR: =OFFSET(DATA!$C$60,0,0,20,1). Unfortunately, I canít seem to get my INDIRECT formula to work in order to use it to replace the blue bit above: INDIRECT("'"DATA"'!&ADDRESS(MATCH('SHEET1'!AC8,DATA_Date,0)+22,3)"). The orange bit of the formula above returns a value of 60, therefore the ADDRESS formula should return $C$60, that can then feed into the INDIRECT and act as the equivalent of DATA!$C$60. But it doesnít.

View 2 Replies View Related

Sorting By Variable File Instead Of Specific Named File?

Jul 18, 2014

I recorded what I wanted but don't know how to generalise it so regardless of sheet name it can be sorted instead of specifically looking for "leanne final test" worksheet and sorting it by precise cells.

I have starred the section out so you don't have to focus on the rest of the code. Initally I ask for the file to be opened using WeeklyFN, would I need to use it again somehow ?

View 4 Replies View Related

Automatically Change The Point Name To Match The Point Name In Column

Dec 10, 2008

I have a pivot table as shown below which is pretty straight forward however I am trying to create a macro that will automatically change the point name to match the point name in column E then copy that resulting dispaly to another sheet then pick the next point name in line and do the same thing and repeat for 50 rows, so my end result will be 50 pivot tables ready for printing. I can do this manually but I am trying to make it automatic...BTW the point names in column E change everyday but the pivot table supports the name changes.

Option Explicit
Sub PointName()
Dim Ws As Worksheet
Dim Rng As Range, Cel As Range

Set Ws = ActiveSheet
Set Rng = Range(Cells(2, 7), Cells(Rows.Count, 7).End(xlUp))

For Each Cel In Rng
Ws.PivotTables("PivotTable1").PivotFields("Point Name").CurrentPage = Cel & " "

Ws.Columns("A:B").Copy
Sheets.Add
With ActiveSheet
.Paste
.Name = Trim(Cel)
.Range("A1").Select
End With
Next
Ws.Activate
End Sub

I turned it off for a while and when I turned it back on I am getting an error
Unable to set the _Default property of the PivotItem class

Debugger is highlighting

Ws.PivotTables("PivotTable1").PivotFields("Point Name").CurrentPage = Cel & " "

View 9 Replies View Related

Custom Toolbar .xlb File

Apr 6, 2008

I am tring to find the xlb file, but it does show in my laptop. I open and close the xl App, but still could not find it

View 3 Replies View Related

Saving Custom Toolbar With File

Oct 7, 2008

The file who containd the toolbars informations is C:Documents and Settings<<USER>>Application DataMicrosoftExcelExcel.xlb

I copied this file to another computer and my custom toolbar appeared there.

In a file, I created a custom toolbar with submenus. It is possible to save this toolbar with file, so that I can use the file on other computers without the need to create each time this bar.

View 2 Replies View Related

VBA To Create Word File And Add A Custom Property To It

Apr 1, 2009

I have an Excel sheet with a long list of data. A short example is shown below:

Section | Title | Item
1 | INTRODUCTION | a
1.1 | title2 | b
1.2 | title3 | c
1.2.1 | title4 | d
1.2.2 | title5 | e

I made a VBA macro in Excel that runs through this list and creates a new Word file for each item. The filename of the document is based on the data in the Excel file (section and title). Now I would like to add a custom property to each of the newly created Word files, i.e. the value in the 'item' column. Does anyone of you know how I should do this? Or should it be better if I write a macro in Word that runs through the Excel data to create the word files? Here is the code I use to generate the word files:

View 2 Replies View Related

Custom Macro To Create New File From Data

Jun 12, 2009

I'm looking to create a new file from data in my table. I don't want to even imagine having to do this manually again...I'm optimistic there is a solution. All the data needed to create the file is in the table, but i need it stacked and organized in a weird way. It's almost to hard to explain...so I color coded an attachement that basically says it all. It's pretty much the same thing repeated over and over except the last 2 lines. It's just a really messed up organization. In the real version I need the new file in a new workbook. I'm extremely grateful to anyone who can automate this thing

View 2 Replies View Related

Reading Custom Properties From A Closed File

Jul 7, 2008

I would like to read a few custom properties of excel workbook, even if they are close.

My intention is to build a list of compatible workbooks.

The compatibility woul be determined fom a custom property.

How can I read a custom property from a file wothout opening it?

View 9 Replies View Related

Custom Add In: Add The File Name Extension And Relevant VBA Code

May 21, 2007

Has anyone got the add in code? I have my own custom menu bar on my excel. But every time i want to add a new link i must go into the code and manually add the file name extension and relevant VBA code. Is there a method of just entering the file extension in a cell range and excel will automatically update or pick up or link from this location?

View 9 Replies View Related

Create Custom Menus For Specific File

Sep 14, 2007

I tried to create a custom menu for a specific file. However, after creating the menu, I posted the file in Sharepoint. When a user download the file from the sharepoint site, the custom menu doesn't work because it is looking for the macro links from my computer. Another problem is that now the custom menu shows up in all other excel files that I open.

My questions are:
1. How do I do it so that the custom menu shows up only when this file is opened up.
2. How do I go about making the menu to look for the macros embeded in the file itself instead of looking for it in my file folder.

View 9 Replies View Related

Write Data To HTML File With Custom Tags

Nov 14, 2006

I'm trying to take the contents of an excel speadsheet and write it to an html file with my own formatting. For example I would like the row:

|32|55|28|

to end up in the html file as:

<tr>
<td class="align-right">32</td>
<td>55</td>
<td class="">28</td>
</tr>

In theory it seemed fairly simple to loop through a sheet and write before and after each cell, but once I tried writing the code I realized I was in way over my head.

View 9 Replies View Related

Custom File Name At Startup Using Macro Enabled Template Format (XLTM)

Jul 17, 2012

So I am trying to make a file that when opened will act as a template does and change the file name on start-up.

Typically, the template changes the file name by appending one number (e.g. "Book Template REV 1.1.xltm' upon opening would change the file name to 'Book Template REV 1.11.xlsx'). What I want to do, however, is to custom the name change so I could use the file 'Book Template REV 1.1.xltm' while having it change the file name upon opening to 'Custom Name 567.xlsx', without a user being notified of the change (since typically when a template opens the file, the user has no notification that the file name has changed ever so slightly).

View 1 Replies View Related

Excel 2010 :: Custom List Deletion Appears To Be Corrupting File?

Nov 13, 2013

We are in the process of switching from running Excel 2007 under Windows XP to running Excel 2010 under Windows 7. Most of my Excel reports are not having any issues. However, I have several macros that cause Excel to crash when they go to save the file. Through trial & error, I have found that the problem seems to occur after deleting custom lists that were created earlier in the macro. Here's the pertinent code:

' Declare Variables
Dim VarListNum1
Dim VarListNum2
Dim VarListNum3

[Code]....

When I execute the macro line-by-line, it is creating & deleting the custom lists as expected. However, if I try to save the file after any of the custom lists have been created, Excel crashes. Has something changed in Excel 2010?

View 2 Replies View Related

VBA Open File In Dynamic Named Folder

May 16, 2008

Anyone up for getting me started on code to open a file in a "dynamic" directory, specifically:

Where

Main directory is G:REPORTS
The file name is "Pivot_xx-xx-xx.xls"
The directory where the file is located is G:REPORTSxx-xx-xx
xx-xx-xx is yesterday's date

View 9 Replies View Related

Copy Data From Named File And Location

May 27, 2006

I am trying to set up a file name and path in a cell, and then use this from a number of other cells but with a cell location added to it. So for example:

cell A1 contains a file name "c:mydirectoryexcelfile.xls"

cell A2 needs to contain the contents of the cell at location K12 (for example) from the file referred to in A1
cell A3 needs to contain the contents of the cell at location K13 (for example) from the file referred to in A1

This is to save having to put the filename and cell reference in all of the of cells. I would then do the same thing with another file in column B of this file and the same with column C etc.

View 2 Replies View Related

Excel 2007 :: Saving File With Name Based On Cell Contents With Custom Formatting

Aug 16, 2012

I have a worksheet that has a number in cell K5 - the number is generated on "file open" code and is custom formatted as "TN"0000. Thus 1 appears as TN0001, 2 as TN0002 and so on. I am trying to save a copy of the workbook based on the this cells contents i.e. TN0001.xls, TN0002.xls etc. but the files are saved as 1.xls or 2.xls. The code I am using is

ActiveWorkbook.SaveAs Filename:="C:DataExcelFORMSDelivery Note" & Range("K5") & ".xls", _
FileFormat:=xlNormal, ReadOnlyRecommended:=True, CreateBackup:=False

I know I must make reference to format within the above....but how? if try something like

" & Format(Range("K5").Value, ("TN""0000")) & ".xls"

I get TN00000.xls

View 2 Replies View Related

Save Single Worksheet As File Named From Range

Jun 18, 2007

About 2 weeks ago Reafidy posted a reply to the following thread. Save Individual Sheet Based On A1. As I do not want to hi-jack anyone elses thread so I am starting a new one. The code posted does basicly what I need however I was wondering if it is possible to save only "ONE" specific sheet which could be specified in the code, to a specific folder specified in the code and under a name defined by a cells contents. eg.

Save a single sheet named "MatData" from a workbook, name the saved sheet from a "named range on sheet1" & "Cutlist" & ".xls"
to a Folder on the "D" drive called "Saves"

View 3 Replies View Related

Excel 2010 :: How To Activate File And Create A Folder In Named CustomUI

Jul 28, 2013

I have a Excel 2010 file that I want to activate the file and create a folder in it named customUI.

the steps to achieve this?

View 7 Replies View Related

How To Make A Custom Conversion Program / Formula Between Custom Data

Feb 15, 2014

I'm trying to make a converter between about 8 various types of values. These are not units like Km or miles or something like that, but rather numbers that represent a specific "hardness value" on a variety of scales (to name a few: HRC, HRA, K)

What I've been doing so far is plotting the two types against eachother and then getting the best trendline I can so that I can use that formula to convert between the two with relative certainty. (for example, when plotting HV vs HRC my fourth order polynomial trendline with an Rsquared of 1 is y=0.0001x4 - 0.0188x3 + 1.0768x2 - 20.709x + 350.69)

My questions comes up where I was hoping to make a window or box of some sort allowing the user to input a numeric value, then selecting the Input units and the hopeful output calculated units, and have the box spit back to the user the conversion.

View 9 Replies View Related

Custom Transferable Toolbar Of Custom Functions

Sep 2, 2008

I want to be able to create a range of VBA userforms to quickly perform long tedious tasks. I want these userforms to be accessed from a nice tidy toolbar.

I have done this and it looks nice and works well. What I would like to be able to do is have my custom toolbar of userform controlled functions be transferable so that if someone else wants my toolbar and attached functions they can install it easily much the same way you can do with an add in.

Is this sort of thing possible or does it require them to manually install all my userforms, modules and toolbar? If it is possible what sort of things should I be looking at?

View 9 Replies View Related

Mastersheet - Auto Input Named Rows Onto Other Named Sheets

Apr 1, 2014

I have a master sheet and 102 'advisor named sheets'. The master sheet is updated daily with information (number and text) along 1 row in different columns (A:W). I would like when the advisors name is typed (W) =joebloggs! for this whole row to be auto input on joebloggs sheet. There can be multiple of these entered daily for same person, so the information would need to populate on the next row so not to type over the previous entry.

View 3 Replies View Related

Named Ranges On Multiple Sheets With The Same Named Range & I Cant Figure Out How To Do This

Jun 2, 2006

I need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...

View 2 Replies View Related

Countif- Use A Named Criteria As Well As A Named Range

Oct 25, 2009

if I can use a named criteria as well as a named range. In essence what I am looking to do is count certain cells that meet the criteria in a certain named named range,

View 9 Replies View Related

Combine Two Named Ranges Into 3rd Named Range

Mar 14, 2013

Merge two columns into one list in excel

I would like to combine List1 and List2 into a 3rd named range called List3. I was wondering if this were possible without using any additional cells/columns (i.e. I don't want to use Column C like in the example shown in the link above).

Here's the formula from the example:

Code:

=IFERROR(INDEX(List1,ROWS(C1:$C$1)),IFERROR(INDEX(List2,ROWS(C1:$C$1)-ROWS(List1)),""))

I've played around with it, but could not come with any that worked.

View 3 Replies View Related

Copy/Paste Cell To Named Range Named In Adjacent Cell

Sep 4, 2007

I have read post re this question but have not been able to answer my problem. I get the error message 'Application defined or object defined error' when running the code below. I should indicate the range counter currently indicated about 6,200 rows that this code will work on and the individual range names in the list of 6,200 rows are spread over at least 20 worksheets.

The code appears to be running but after some time it stops on the line of code 'Range(Cells(i, 1).Value) = Cells(i, 2)'.

Sub PopulateWithImportData()
Dim counter As Integer
counter = Sheets("Imported Data").Range("Counter")

Application. ScreenUpdating = False
Application.Calculation = xlCalculationManual
Worksheets("imported data").Select
Range("a1").Select

i = 1
Do Until i = counter
Range(Cells(i, 1).Value) = Cells(i, 2)
i = i + 1
Loop

View 8 Replies View Related

For Every Point Above X Do Y

Mar 22, 2014

I want to pay salespeople a bonus when they sell things at a higher Gross Profit. There is a minimum markup. I want to say for every additional point above the floor (F) well pay (B*C). There is also the actual attainment filed (A). For this example lets say the floor (F) is 22% and the actual attainment is 26%.

Illustrations:
.22 = 0(B*C)
.23 = 1(B*C)
.24 = 2(B*C)
A = .26
F= .22

What I want is:
if A >= F THEN for EACH POINT above the floor add 1*(B*C)

Its actually buried in a larger IF(AND function and I need to be able to drag the function down a long column and have it scale with volume sold. But its just this bit of logic I'm hung up on.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved