Anyone up for getting me started on code to open a file in a "dynamic" directory, specifically:
Where
Main directory is G:REPORTS
The file name is "Pivot_xx-xx-xx.xls"
The directory where the file is located is G:REPORTSxx-xx-xx
xx-xx-xx is yesterday's date
I am trying to open a website, then for excel to download the csv file, then for it to save it in a specific folder under a specific name and file format (excel).
I am successful at opening the website with the following code, but how to do the rest.
Sub Searchez() Dim IE As Object Set IE = CreateObject("InternetExplorer.Application") IE.Navigate "http://quote.morningstar.ca/Quicktakes/stock/keyratios.aspx?t=clwr®ion=USA&culture=en-CA&ops=clear" 'load web page google.com IE.Visible = True While IE.Busy DoEvents Wend
'IE.Navigate2 "javascript:SRT_keystuts.exportcsv()" 'this is the name of the download link as from when i hover my pointer over download link. End Sub
I am using the code below to Open the most recent file in a folder.But once it Identifies the most recent file I get a run time error"1004"
xxxxxxxxxxxxx(name of File) could't be found.At line "Wookbooks.Open strFilename".My question is , why can't it open it, it has the location and the file name?
This code works as long as the macro and target file are in the same directory(Folder)
I am using excel 2007 and I’m trying to open a file folder from a worksheet using a control button. They are both in same file folder. I’ve have tried Workbooks.Open Filename:=ThisWorkbook.Path & "Report"
I also tried to record a macro but would not record going to file folder.
I have a folder called 'Refresh'. Every week a new file is dropped into that folder. Instead of me placing that new file into my workbook, i would like my macro to just grab it. Is there a way for VB to grab the most recently created file that comes into my 'Refresh' Folder.
I am trying to write a macro to find a file in a specific folder. The file name changes weekly. (Ex. C:My Folder31207.xls). I need to find the most recently modified version of the file and open it.
I would like to run a macro that is going to open a file (Test.xls) Simple so far.... However, this file is 1. stored every month in a different folder (eg: 200709,200710, etc..) and the file is named according to the month (eg: Test09.xls, Test10.xls, etc...) In my excel book, I did created two cells which I already use to save a document according to those cells. One cell with Acct Period (200710) and another one with the month (10). I have tried the following formula with no success:
I am trying to open a folder so I may choose the workbook to open. I am able to open a workbook but I want to open the folder which contains the workbook.
I have a requirement to search workbooks in a particular folder with specific string in file name. For example, let us assume I need to find a file which contains the name 'RR' in it. The position of 'RR' will vary with files i.e. 'RR' might be present either in the beginning, middle or at the end of file name. All I wanted is to search for file with 'RR' and do some activity and close the file and then goto next file. Similarly, the next search has to be performed with the files containing the name 'BB' in it.
I have an Excel Worksheet (let's call it "AA.xlsm") which uses VBA code to loop through column A, update column B with some results/values, and then (for each value in column A) SaveAs the worksheet into a different filename/path as a ".csv" type file.
My line of code for the SaveAs is as follows: Workbooks("AA.xlsm").SaveAs LEpath & CurrFldr, FileFormat:=xlCSV
My problem is that my original worksheet, AA.xlsm, gets closed whereas I need it to stay open/active after each SaveAs iteration.
I have some daily text files in a folder (so about 30 of them each month), which in the end of month, I need to open them up in excel, format them so that I can use the information for my analysis.
I would like to create a macro, to quickly open them all up at once and save them each individually in .xls or .xlsm format.
I am new to VBA and after some research online, I was able to have the files open with the following code. but now I don't know how to proceed further to save them one by one with the same name but in .xls or .xlsm format.
Sub Opentxtfiles() Dim MyFolder As String Dim myfile As String
I would like to replace the blue bit of this Dynamic Named Range (DNR) with an INDIRECT formula in order to modify the starting point for the DNR: =OFFSET(DATA!$C$60,0,0,20,1). Unfortunately, I can’t seem to get my INDIRECT formula to work in order to use it to replace the blue bit above: INDIRECT("'"DATA"'!&ADDRESS(MATCH('SHEET1'!AC8,DATA_Date,0)+22,3)"). The orange bit of the formula above returns a value of 60, therefore the ADDRESS formula should return $C$60, that can then feed into the INDIRECT and act as the equivalent of DATA!$C$60. But it doesn’t.
I make calculations for these projects using an excel file. In this excel I also type the projectnumber (cell J2)
Now i would like to make a button. When pressed, it checks the projectnumber cell J2, looksup the corresponding folder and saves the excelfile in PDF format in this folder.
I have found macro to find files in folders, but none which do the above.
I need a macro in a workbook to look at all the files in the same folder that have "*att*.xls" in the name and determine and copy from the range A15:W515 only the rows that have data in at least columns A, C and D. Each file will vary as to how many rows there will be and there are more than the files with "*att*.xls" in the folder. The data will be on the only worksheet in each file and the worksheet is named "G2WAttendee_xls" the data from all the files need to be copied to the file called "Consolidated webinar reports.xls" (I am using Excel 2003) and to a sheet called "Attendance Data" and added to the end of the last paste.
At the start of the macro the current file "Consolidated webinar report.xls" should be saved to a sub folder of the current directory and have the date saved added to the name. The sub folder is called "Completed reports". The data in the original file on worksheet "Attendance Data" should be deleted.
At the end of the process all the files that have had data copied from them should be moved to the sub folder "Attendance reports consolidated" (This could be done as each file is closed if that is easier).
I have headings in row 1 of the "Attendance Data" worksheet that match the headings in the various files in the folder (which will always be in row 14 of the individual "*att*.xls" files).
The folder with all the files and the "Consolidated webinar report.xls" file is at path "Z:P and S MEvaluationsWebinar series 2012-13TB".
I have a tool file which contains Excel VBA codes. When I click button it asks to select a file. I want that anytime I click the button the dialogue box should open in the folder containg the tool.,
I want it to return the subfolders from a named folder, but only the folder name, right now it returns the whole path. So my code has to then text to column that path, then delete the columns I don't need. Is there a way to shorten this? Here is my code so far:
'Lists Folders' Worksheets(1).Range("A3:A300").Value = ClearContents Worksheets(1).Activate Dim row As Integer Dim SearchFolders As Variant row = 3 LookInTheFolder = "I:projects2Koch58MY8900PROCESS2013 Work (Phase 3)DIH_SulfolaneEquipment"
I want a Macro to take a sheet (same named sheet) from several workbooks in one folder into a new workbook and paste each in one sheet in this new workbook. i want to rename the sheets in the new workbook based on the value in cell D2 ( i can manage that
How can i manage that by simple opening the folder or do i need to open all those workbook manually for that to be done.
I have several excel files in a folder, and they are named:
AA v.5 AA v.6 AA v.7 AA v.8 BB v.5 BB v.7 CC v.8 CC v.6
The "AA" and "BB" are names of who created it and v.5 are the week it was created.
What I would like to do is in an Excel file be able to choose to retrieve information about for example how man files with v.5 in its name.
OR information about all files with "BB v." in its name (to see all files created bye BB)
Or "BB v.4" (all files created bye BB in week 4) Or "BB v.4"+"BB v.5"+"CC v.6"
The reason for this is that I would like to be able to create statistics from this so that I can see how it has changed like in a graph. So that I can see the difference and compare how many files BB and CC have created and which week.
The code below looks at file names in column A and then goes to a folder and opens and copies the data in range c2 -lastrow from each file and pastes the data into sheet2.
how I could add to the code so that it also inserts the file name in column c?
It would make it easier to track the data in column B.
VB: Sub CopyFromFile() Dim fPath As String Dim lRow As Long
[Code].....
I have attached a sample workbook. The list of file name is in sheet 1. An example of the output is in sheet 2. The data in column A is dummy data generally spans 100's of rows not just 10 as in the example.
The purpose of the code is to be able to put a list of file names in column a in sheet 1 and extract data from those files in a folder. The data extraction works fine. The reson for adding the file names is so that I know what file the data came from.