I need to link the textboxes of a form to the appropriate cells associated to the selection made by a combobox. And in the process I need to be able to Edit one of those Textboxes on the fly while the rest will be locked to the user.
Not sure if the editing of the Notes section can be real time of if it must be updated through a button.
My data resides in a workbook in sheet2 and sheet3. I have 4 comboboxs refering to different columns in sheet2 and sheet3. Basically when the user selects all the four comboboxs, the criteria should be satisfied and the results in terms of rows matching those values should be shown in the textboxs below.
Each three of the textboxs refers to individual columns in sheet2 and sheet3. All I want to do is simple search criteria on both sheet 2 and sheet3 and put the results in textboxs.
I have populated my comboboxs but dont know the macro to do the search results .
my userform,which has 4 comboboxs
combobox1 = sheet2 column C
combobox2 = sheet2 column BL
combobox3 = sheet3 column K
combobox1 = sheet3 column F
The results which satisfy the above 4 criteria should come from ,when user presses POP UP DETAILS BUTTON,
textbox1= sheet3 column C
textbox2= sheet3 column N
textbox3= sheet2 column T
Actually I have many records which satisfy the above 4 criteria, dont know how to display them whether in textbox or any another method.
I have a table, headers "FirstName" and "SurName".
Further a Userform with 2 Comboboxes "FirstName" and "SurName"
I'd like to choose the FirstName (say Jack) in the "FirstName" combobox, and based on that get the choice of the Surnames of all my Jacks in the "SurName" combobox.
Actually my sheet has much more fields and comboboxes, but i think my problem is just that I do not find a way to populate them dynamically.
I have created a UserForm that has a ComboBox and depending on the number selected I want it to show that number of Labels/TextBoxes...
So if I select "0" nothing is shown, if I select "1" one set of Labels/TextBoxes is shown, select "2" and two sets of Labels/TextBoxes are shown... but also if I have selected "2" and then select "1" I want the second set to be hidden again...
Also I know I should have renamed the Label/TexBoxes to make it easer but I was adding things and making it up as I went along...
I'm using Excel 2010 on windows 7.
Code:
Sub UnHide_NewRoutings()
If (Engineering.ComboBox2.value) = "0" Then
Engineering.Label4.Visible = False
Engineering.TextBox5.Visible = False
Engineering.Label9.Visible = False
Engineering.TextBox9.Visible = False
[Code] ..........
How do we populate a List Box based on two Combo Box Selection on a userform?
Sheet2 has 5 Columns of datas all the way down...
Combobox1 is the Column A
Combobox2 is the Column B
I have created a userform to keep track of "Customer Call Cycle".
This is what I have:
1) I have 3 Sales Reps with 50 Customers each.
2) Each customer has multiple contact persons
I have a userform with 2 combo boxex, 1 list box, 1 textbox and 2 buttons.
I want to be able to select Sales Rep from the 1st combobox which will automatically populate the second combobox with customer names related to that sales rep.
and when I select a customer name from 2nd combobox, I want all the contact persons in the database that are related to that customer name to populate in the listbox.
Attached is my sample data.
In sheet "support data" I have two columns.
One column is a client reference and the one next to it is a client name.
On my form the combo box is populated with the client references.
When i select a reference in the combo box I would like to populate textbox1 with the corresponding client name from "support data"
(as an advanced feature it would be good if the textbox1 kept changing as the mouse was hovering over the list of client references in the combobox)
I need to populate a textbox based off 2 combobox selections. My first combobox selects the worksheet. "08BOG, 09BOG, 10BOG...15BOG" My second combobox lists majors based off of the worksheet selected in combobox 1. I need my textbox to populate the value 18 rows over the selected worksheet and the selected row.
Currently I have something like this:
[Code] ......
But obviously this is all wrong because it is only referencing one sheet instead of the selected sheet in the combobox.
My table contains 26 columns, I have Column E header as 'Assignee' and Column J for 'Date_Closed'.
I have a form containing a combobox and a listbox. The combobox is populated with 10 Assignee Names.
I want the listbox to be populated with all rows containing the selected Name ONLY if Date_Closed column (J) is blank/null.ie.date not filled yet.
For example, if i select "Ann", the listbox will show all rows in the table that have Assignee Ann for and closed date is still blank.
My table contains 6 columns, one of which is 'season'.
I have a form containing a combobox and a listbox. The combobox has 4 options (spring summer autumn and winter). I want the listbox to be populated with all rows containing the selected season. For example, if i select "spring", the listbox will show all rows in the table that have spring in the season column.
I realise this is a very remedial question but i am very new to VBA and programming in general!
I have a form that an administrator will open to search for items needing approved (ie. status is "Submitted" and they'll be going in to confirmit). The datasource is a table. For these purposes I'll arbitrarily call it Table1 for ease. There are multiple columns in the table, and I'll set the column width to "0" for those I don't want displayed, so we'll call the columns to be displayed Col2, Col3, and Col22. There are two dependents, because Col2 is the Division, of which there are 3 (Central, East, and West). The administator will select their Division and the associated ListBox will display results for all locations having a item status of "Submitted". Col3 will be the branch name, and Col25 with be a total $ amount of the order. Cbo1 (ComboBox1) will house the Private Sub Change() for the macro after a division has been selected.
Thus far I have thought of using a loop such as:
Code:
Private Sub ComboBox1_Change()
For n = 1 to ws.ListObjects(1).DataBodyRange.Rows.CountIf ws.ListObjects(1).DataBodyRange.Cells(n,2) = Me.ComboBox1.Value and ws.ListObjects(1).DataBodyRange.Cells(n,25) Like "*Submitted*" ThenMe.ListBox1.AddItem = If ws.ListObjects(1).DataBodyRange.Rows(n).Value2End IfNext n
End Sub
I've got a mismatch in the the Value2 type for the .AddItem. Not sure how else to approach though.
I need to populate a worksheet's rows with values from 2 comboboxes and a listbox which can have multiply selected items. After finding the row's last free cell, I have the listbox values properly populating correct column. However, I not sure how to get the corresponding combobox values assigned to the appropriate columns.
View 2 Replies View RelatedI have a question on how I could populate data using a combo box selection in Excel 2010.
For example, I have a table with values in Sheet 1, & below that table there is a combo box whereby another table of values can be populated based on the selection of the combo box.
Maybe to make it clearer...
Table 1
Name | Address | Phone number
Andy | Avenue 2 | 999
John | Road 5 | 998
Combo box (selection of names): John
Data derived from combo box - Table 2
Name | Address | Phone number
John | Road 5 | 998
how I could solve this Also, do let me know if this can be done without the use of VBA.
I need to populate two combo boxes from excel sheet, the data will be like below:
Column A Column B
A 1
A 2
A 3
A 4
A 5
B 100
B 101
B 102
So from the above data, one combo box should hold unique values A & B.
On selecting a value from the 1st combo box A or B, respective values should be populated in 2nd combo box.
So the data should be like below:
If A is selected in the 1st combo box, then 2nd combo box should only show the values 1,2,3,4 & 5.
If B is selected in the 1st combo box, then 2nd combo box should only show the values 100,101 & 102.
Friends I need it in a macro and one important point is, this is dynamic and it is not static and the data can be more.
I am trying to do is when a user puts in an RMA number into a textbox (txtReviseRMA) on the userform, it will search column B on the spreadsheet to find the matching RMA number. Then I want it to look in column G for the Serial number and populate another textbox (txtSerial1) on the userform with that number.
My problem is that there can be a little as 1 serial number to an RMA or as many as 14, and each serial number has to go into a different textbox (they are named txtSerial1 all the way to txtSerial14).
If there are multiple serial numbers being sent in on one RMA, they are on different lines.
For example:
Column B (RMAs) Column G (Serials)
(B1) R66245 (G1) AA-10-1000
(B2) R66245 (G2) BB-20-2000
(B3) R66300 (G3) CC-30-3000
(B4) R66305 (G4) DD-40-4000
(B5) R66305 (G5) AA-10-1000
(B6) R66305 (G6) FF-60-6000
(B7) R66375 (G7) GG-70-7000..................
I have a combobox in which are the numbers 1 thru 10. I'd like for the user to be able to choose a number and then that number of textboxes appear below. I have the textboxes invisible on the userform and I'm trying to work out to code to show them when the number is selected (by command button). Heres my code, it only seems to show my first set of textboxes no matter what number is in the combo box. Can someone please help me make this work? And is there a more concise way to do this?
i changed the names of the textboxes because i built the form before i thought about the code and frankly there are too many all together for me to remember their names
Private Sub CommandButton7_Click() 'Ok button page 3
Dim i As Integer
Dim j As Integer
For i = 1 To 10
Select Case Val(ComboBox21.Text) = i
Case 1
I have 3 text boxes. and a numpad of 9 command buttons.
I wish to click on one text box and then click each of the "numpad" command buttons to populate the actve textbox with the number buttons that i click. What VBA code would i use to do this?
I think i can code something like this quite easily, the bit i am struggling with is how to make it so that only the active textbox text is amended.
I have a simple user form that has a combobox and 5 textboxes.
The combobox gets its row source from all the data in column A of the worksheet and the 5 textboxes will have decimal number inputted.
when commandbutton 1 is clicked I would like exel to find the value in the combobox on the worksheet and input the 5 textboxes in colums B-F. I'm sure it has something to do with "offset", but I can't quite figure it out.
I've been trying for hours to populate a textbox on a userform based on a combo box. I'm including a zip of my workbook to see. (don't laugh to hard at my code, like I said I'm green...:) When you select a mix design in my form I want the next six combo boxes to populate. The way I have it now is based on one of the many examples found here, (none of which have worked for me so far, but this one said "the simplest way to do this is......") And I get an error 425 - "Object not found". I've done searches based on the error but haven't found an answer.
View 4 Replies View RelatedIts a phone number directory. the data is retrived based on nickname. when a nickname is selected, its phone number and details will be updated in the textboxes ... example: tony (in A2) is selected from the combobox, his phone number (in B2) and details (in C2) are updated in the textboxes.
View 2 Replies View RelatedI have three textboxes (16,17,18) that need to be disabled if a certain value ("Regular Hours") is in combobox1. Would I use an If statement? Also, is there a way to "gray out" the textboxes to show they are disabled?
View 6 Replies View RelatedI created a UserForm then linked ComboBox1 to range A2:A, TextBox2 to range E2:E, and ComboBox3 to range M2:M of the same worksheet, named Sheet3. The row contents in Column A, Column E, and Column M are associated. Therefore, when the UserForm is active I want to be able to select a row from Column A in ComboBox1 and have the UserForm pull the contents from the same row of Column E into TextBox2, and Column M into ComboBox3. Here is what I have so far, but its not quite doing it.
Code:
Private Sub UserForm_Initialize()
Sheets("Sheet3").Activate
Dim ColARange As Range
[Code].....
I want to enter a value in a textbox, search for it in an worksheet, and populate other textboxes with adjacent values if the value is found. Anyway, the problem is that if the value is not found, I get a debug error.
Dim test1
test1 = TextBox1.Value
Worksheets("data1").Activate
Find_Range(test1, Cells, xlFormulas, xlWhole).Select
TextBox2 = ActiveCell.Value
TextBox3 = ActiveCell.Offset(0, 1).Value
I'm sure there's far better code to do what I need, but I tried to keep it simple. With the above code, it only works if the value is found. If it's not, I get an error. So how do I make it so that if the value is not found, the value of the textbox2 is "Not Found" or something...
when i choose material from my combobox Options (cboTM), i wanted, only the textboxes regarding to the sheet material unlocked, and the others locked with the color of the form, and the same for the other options like worklabor and equipments. i could blocked for material with this code :
[Code] .....
The prob is, worklabor and equipments will be blocked too, and i dont know how to put correct info on the textboxes.
Attached File : teste1.zip
I want it to populate a combobox in a userform. Should it go in the code segment for the userform, in a module, or some other place? The following is code I originally found (by Leith Ross of this board) to find the last row in column "A", and load the combo box "ComboBox1"
View 3 Replies View Relatedable to populate a combobox from data elsewhere in the workbook as follows:
View 7 Replies View RelatedIt's a customer form where I need the contact person (txtContact) to be filled out when selecting the customer (in the cboCustomer).
The data is listed on the sheet "Customer", where all the customer names are in column from B2. The contact names are from C2 in the same sheet.
I have made a list in the namemanager called Contactlist (=OFFSET(Customer!$C$2;0;0;COUNTA(Customer!$C:$C)-1;1)
I have this VBA for getting the customer to the cbobox
I have created a combobox1 and I have written a code to populate the box the problem is when I run the form and select the data from the dropdown list it gives me an error. I can see the data but just can't select it. I have a command button that I use to save the data I select and insert it into fields on my worksheet. All I just need the drop down box to let me select the data I chose below is my code.
Private Sub ComboBox1_Click()
ComboBox1.Value = .Range("A2:A14")
End Sub
i would like to create a vba that will populate based on the comboboxes value
like this code
Code:
'for cmb1
'if cmb1 = major 1 then
'if range"F4" is empty then
'copy sheet1 range"A5:R5" to sheet2 range"F4"
'if cmb1 = major 2 then
'if range"F4" is empty then
'copy sheet1 range"A16:R16" to sheet2 range"F4"
[code]....
i have the following
Dim cn As ADODB.Connection
Dim qc As ADODB.Recordset
Dim Equip_File As String
Dim Equip_ID As String
Dim Equip_Param As String
Set cn = New ADODB.Connection
Set qc = New ADODB.Recordset
cn.Open "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=\ServerDISK 1UncertaintiesUncertainties.mdb"
'Populate QC Number Dropdown menu
qc.Open "SELECT [Equipment_QC] FROM [Equipment_Table]", cn, adOpenStatic
With ComboBox12.List
.Clear
Do Until qc.EOF
.AddItem
qc.MoveNext
Loop
End With
Equipment_Title.Text = rst.Fields.Item("Equipment_Title").value
qc.Close
however, i cant seem to populate the list, i get error :424 object required
is this because the first record in the db has the Equipment_QC field blank? i need to be able to have blank fields..