VBA Command Button - Calculate Average Of Textboxes And Put Into Cells
Feb 9, 2014
I need the code to calculate the average of 4 textboxes and then put them into the cells, and every time new calculation is given, it is put into the new cell :
i have textbox (1,2,3,4)
my commandbutton needs to the calculation average of the value that is put into those textboxes.
I am trying to disable a command button if 4 textboxes are empty. I can make it work if one of the textboxes are empty but not all of them. this is what i have so far.
Private Sub TXT3_Change() If TXT3.Value = "" Or TXT4.Value = "" Or TXT5 = "" Or TXT6 = "" Then CommandButton13.Enabled = False End If If TXT3.Value "" Then CommandButton13.Enabled = True End If End Sub
I have created a command button, right clicked the button and selected 'View Code'. In the code window I've entered the following code:
Private Sub CommandButton1_Click() IB_FB_Hedge_3 Outcome.range(W10:X11).ClearContents End Sub
As soon as I enter the code a message pops up:
"Compile error:
Expected: list separator or )"
Is my syntax wrong? Is the sheet name, 'IB_FB_Hedge_3 Outcome' not allowed?
When I created this code a few minutes before I was not having the 'Compile error' problem, but the Command Button was not working either. When I clicked the command button it would just show the circles at the corners, suggesting that it is still in editing mode and not properly activated as a command button.
Sheet1 A2 = Name (chosen off sheet2) A3 = Job Title (chosen off sheet2) A4 = Department (chosen off sheet2)
Sheet2 Column A = List of names Column B = Corresponding Job Title Column C = Corresponding Department
I need to be able to choose a name off sheet2, click the command button and it send selected name, job title, and department to sheet1 to the respective cells.
i want the user to be able to change the cell color on the click of a command button. the worksheet is protected. when the user click the command button the active cell changes to red and offsets by 1. then the work sheet is locked again.
The two problems I am having is 1. I want the range to begin from row 10, column k to column FD. all cells down
the second problem is the current code allows me to edit locked cell columns A to J ...
Is it possible that when you press a command button, that the first thing it does is to execute the code assigned to another command button (IE in another sub).
What I would like to do is both calculate the Average value of the visible cells and the Sum as well. I have tried to adapt the code I have but my knowledge is just not good enough to do this.
I have 3 text boxes. and a numpad of 9 command buttons.
I wish to click on one text box and then click each of the "numpad" command buttons to populate the actve textbox with the number buttons that i click. What VBA code would i use to do this?
I think i can code something like this quite easily, the bit i am struggling with is how to make it so that only the active textbox text is amended.
How can I return name of a command button on click? I want to create some sort buttons on a sheet I will use regularly to speed things up. I thought if I could call each sort button by the column letter the button sits in I can use this in a single sub for all buttons
e.g the button sitting in column A is called "A". when i click the button, it returns it's name to a variable which I can then use to sort column A. I know I could create a seperate routine for each button but I was just trying to think of something neater.
i want to create a save button in sheet 1, on clicking the same the data entered in the particluar cells of sheet 1 should get saved in sheet 2 in given format
This is probably really straight forward but cant see why it happens, the following macro works fine when called by a button created by the form toolbar but doesnt when called by a command button, get the runtime error 1004, "select method of range class failed"
I have read several articles saying using a command button as a toggle button can't be done but some articles have said it is possible using the state properties.
.State = msobuttondown .State = msobuttonup
Is there any way to combine this with the onaction property so that when you press the button, it stays down and activates a macro then when you press it again it pops back up and activates another macro.
I'm trying to create a command button on my sheet that when clicked will find all rows in column u that read Engineering Evaluation and then copy certain cells from that row to another sheet. The kicker is that this button will be used over and over again as more entries are entered into the log. I only want each row counted once.
Right now I get a run time error for the "For Each Cell In Application.Intersect(Range("u:u"), target)" line.
I have a row data corresponding to the measuring of load cell per min and I need to average the values per hour. So I have a column B for the date (from 1-01-2013 to 31-01-2013, column C for the time (0:00:00 to 23:59:00), and D de values per min I want to average. I have to do the same for the rest of the month of 2013 (February, ...., December).
I would like to know if there is a way to create a formula to calculate the average of the first 60 values (to get the average of the first hour of 1-01-2013), and then copy it to get the average of the following 60 (average of the second hour in 1-01-2013) and so on.
If there is no way to do it, I would like to know if I can do it using functions like average, match, index, offset, what would be the best match of those functions.
I also tried it by doing the analysis in another tab and using the function "averageifs" with two criterias: one for the date (example 01-01-2013) and another one for the hour (example 0:00:00), but it didnt work, it show error: #value. I inserted an extra column in the data tab with just the hour (example 0:00:00) in front of the corresponding column with (example 0:01:00, 00:02:00, etc) Equation I used for this:
=AVERAGEIFS('Data (min)'!D$6:D$43206,'Data (min)'!$A$6:$A$44646,A6,'Data (min)'!$B$6:$B$44646,B6) =AVERAGEIFS(TAB AND COLUMN WHERE THE RAW DATA IS,RANGE OF CRITERIA 1,CRITERIA 1,RANGE CRITERIA 2,CRITERIA 2)
Essentially the user will enter their responses from a drop down list (assigned to about 30 textboxes in the userform: named txt1code, txt2code, txt3code....txt30code) and at the bottom of the userform the number of responses ('Yes') will be counted in real time and displayed in a textbox. (without using a command button)
For example:
The possible responses in the textboxes are 'Yes', 'No', 'Not Applicable', ''.
Yes = 1
I'd like the calculation to ignore No's, Not Applicables and ; however, count all the 'Yes' responses.
If there are 17 'Yes' responses, 10 'No', 2 'blanks', and 1 'NA' in the form, the Totals textbox will display '17'. As the user is entering information-"Yes" responses only (added or deleted), he or she can visually validate that the number of 'Yes' responses has changed.
Is a real-time calculation possible in a userform?
I have a UserForm that Dead Head Miles will be entered into one text box. The Trip Miles will be entered into the second text box I would like for the user form to show the answer after the first entries are made something like this:
1)Dead Head Miles 20 + 2) Trip Miles 500 ----times---$2.00 3)Projected Rate $1040 --show this after the DH and Trip is entered and Multiplied by $2.00
I'm trying to figure out if there is a formula I could use that will calculate the average of a group cells in one column based on the condition of another column. It's hard to explain, so I will show an example. All the data is on a one worksheet and I'm trying to show totals and averages on another worksheet. Location, Days
17, 4 17, 3 17, 5 26, 4 26, 8 26, 10 26, 7
On a different worksheet I would want to know what the average days are for each location. So is there a formula that I could use that will look at column A for a specified location number and then average all the days in column B for that location? I'm using Excel 2003 and have tried using the Average(if) but with no success.
I have searched this topic but I came up with nothing regarding my exact situation.
I have 5 buttons on sheet 1. I want them to all direct me to another sheet in the same workbook. However, some buttons will contain more than one sheet.
Example: Button 1 will direct me to 4 different sheets. Is this possible?
Also, When I open the workbook, I see many sheets that I am working from but I do not want them to show up when I open the workbook. The only way to see these sheets is to click on the command buttons at the top of sheet 1.
I know that this may seem a little strange to request as you can just select the row and delete it, however the sheet is designed as "idiot proof", so I would like to implement this.
Basically, I have a box which states "If you need to delete a row due to incorrect entry, please type the row number here (next cell), and click delete".
I want to know if by using VBA, you can reference the number entered in the cell, and use this to determin the row in which we are required to delete.
I have a 2 worksheets. One "Projects in Process"and the other "Project Completed". when the users fill in the information in cells A4-F4 (line 4 is the starting line and it could go down as far as line 23 or a23 - f23) In Projects in Process they press a "completed Project" command button and the data in a4-f4 copies over to worksheet "Projects completed". In the next available row (starting at row 4).
I am running Excel 2003 and in my workbook I created a macro and assigned it to a toolbar comman button, "Copy Filtered Data". This macro copies the visible data into a new workbook.
This works well but others in my company will also be accessing this workbook from a sharepoint and I discovered that when they open it this command button is not on their toolbar.
Would anyone know what I need to do to have this button load on the toolbar when the workbook opens?
Also, I would like this button to either unload or greyout when the workbook that this button is intended for is closed.