I am having trouble with populating a combo box on a user form. I wish for the combo box to be populated using the names of the sheets of the workbook. I am using sheet1 as the control sheet where a user form will open up from this sheet, this will allow me to select the sheet that I require from a combo box that is placed on the form however I do not seam to be able to code the VBA to populate the combo box with the sheet names.
View 3 RepliesAll I want to do is
put a combo box on a spreadsheet,
have it populated, and sorted - ideally, alphabetically with range names already created.
And
I'd like to be able to click on the Range Name and GoTo the location.
I want to be able populate a combobox with all defined ranges in the workbook?
View 4 Replies View RelatedI have successfully used the course booking form as a base for an input form in an accounting workbook that has several pages. (Thanks to Roy and others for the info; the course booking form on [url]is the best explained piece I have found on the net)
What I would like to do is use a range of cells to populate the combobox so that a user can make a choice from the account descriptions (from a sheet named Intro, b63:99) and have the form return the account number (Intro, a63:a99) to the relevant cell elsewhere in the workbook. The user would then have meaningful descriptions rather than numbers to choose from.
My coding for the form thus far is as follows.
iam trying to populate a listbox with only the workbooks hidden sheets. iam trying to adapt this code which i found in the forums
Private Sub UserForm_Initialize()
Dim wsSheet As Worksheet
Dim lngIndex As Long
With ThisWorkbook
Redim strarray(.Worksheets.Count - 1, 1) As String
lngIndex = 0
For Each wsSheet In .Worksheets
strarray(lngIndex, 0) = wsSheet. Name
lngIndex = lngIndex + 1
Next
End With
With ListBox1
.List = strarray
End With
End Sub
I am attempting to populate a ComboBox ( named "SRnumber2") on a userform (named "UpdateSR"), but have hit a brick wall. The following testing code was working but now it is not:
Private Sub UpdateSR_Initialize() 'This section of code initializes the drop-down boxes.
'Add list entries to SR Number combo box. The value of each
'entry matches the existing SR Information spreadsheet entries in column "A"
Sheets("SR Information").Select
SRnumber.ColumnCount = 1
SRnumber.RowSource = "A2:A200"
SRnumber.BoundColumn = 0 ...........
I need to populate two combo boxes from excel sheet, the data will be like below:
Column A Column B
A 1
A 2
A 3
A 4
A 5
B 100
B 101
B 102
So from the above data, one combo box should hold unique values A & B.
On selecting a value from the 1st combo box A or B, respective values should be populated in 2nd combo box.
So the data should be like below:
If A is selected in the 1st combo box, then 2nd combo box should only show the values 1,2,3,4 & 5.
If B is selected in the 1st combo box, then 2nd combo box should only show the values 100,101 & 102.
Friends I need it in a macro and one important point is, this is dynamic and it is not static and the data can be more.
I have a table, headers "FirstName" and "SurName".
Further a Userform with 2 Comboboxes "FirstName" and "SurName"
I'd like to choose the FirstName (say Jack) in the "FirstName" combobox, and based on that get the choice of the Surnames of all my Jacks in the "SurName" combobox.
Actually my sheet has much more fields and comboboxes, but i think my problem is just that I do not find a way to populate them dynamically.
I want it to populate a combobox in a userform. Should it go in the code segment for the userform, in a module, or some other place? The following is code I originally found (by Leith Ross of this board) to find the last row in column "A", and load the combo box "ComboBox1"
View 3 Replies View Relatedable to populate a combobox from data elsewhere in the workbook as follows:
View 7 Replies View RelatedIt's a customer form where I need the contact person (txtContact) to be filled out when selecting the customer (in the cboCustomer).
The data is listed on the sheet "Customer", where all the customer names are in column from B2. The contact names are from C2 in the same sheet.
I have made a list in the namemanager called Contactlist (=OFFSET(Customer!$C$2;0;0;COUNTA(Customer!$C:$C)-1;1)
I have this VBA for getting the customer to the cbobox
I have created a combobox1 and I have written a code to populate the box the problem is when I run the form and select the data from the dropdown list it gives me an error. I can see the data but just can't select it. I have a command button that I use to save the data I select and insert it into fields on my worksheet. All I just need the drop down box to let me select the data I chose below is my code.
Private Sub ComboBox1_Click()
ComboBox1.Value = .Range("A2:A14")
End Sub
i would like to create a vba that will populate based on the comboboxes value
like this code
Code:
'for cmb1
'if cmb1 = major 1 then
'if range"F4" is empty then
'copy sheet1 range"A5:R5" to sheet2 range"F4"
'if cmb1 = major 2 then
'if range"F4" is empty then
'copy sheet1 range"A16:R16" to sheet2 range"F4"
[code]....
i have the following
Dim cn As ADODB.Connection
Dim qc As ADODB.Recordset
Dim Equip_File As String
Dim Equip_ID As String
Dim Equip_Param As String
Set cn = New ADODB.Connection
Set qc = New ADODB.Recordset
cn.Open "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=\ServerDISK 1UncertaintiesUncertainties.mdb"
'Populate QC Number Dropdown menu
qc.Open "SELECT [Equipment_QC] FROM [Equipment_Table]", cn, adOpenStatic
With ComboBox12.List
.Clear
Do Until qc.EOF
.AddItem
qc.MoveNext
Loop
End With
Equipment_Title.Text = rst.Fields.Item("Equipment_Title").value
qc.Close
however, i cant seem to populate the list, i get error :424 object required
is this because the first record in the db has the Equipment_QC field blank? i need to be able to have blank fields..
I'm looking to change the value of a variable using the selected value of a combobox. I've used the following
Dim DatabaseVal As String
'then on selecting my option from the combo box: "JVU" or "VPU" are the only two options.
DatabaseVal = cmbDbase.Value
When I try and use the variable 'DatabaseVal' to populate a value in another workbook (the workbook contains a reference to the add-in running the above macro), the cell just gets populated with a blank value. I'm sure I'm doing something stupid, but can't see what.
I am trying to populate a combo box with two columns of data read from two consecutive (or non consecutive) columns of data. The following code is what I have come up with after visiting several of the previous threads on similar topics (couldn't find one that gave a general, concise solution).
Private Sub UserForm_Initialize()
Dim lngRow As Long
Dim lngRowtot As Integer
Parameters1.SG1.Clear 'Clear combobox SG1 in userform named Parameters1
'Find the number of rows required for the array and combo box
lngRow = 12 'Start searching on row 12
Do While Sheets("Timber Properties").Range("H" & lngRow).Value <> "" 'Read until empty col H lngRowtot = lngRow - 11
lngRow = lngRow + 1
Loop
Dim MyArray(1 To lngRowtot, 1 To lngRowtot) As String 'I get an error with the last ingRowtot on this line.....................
I would like to populate the names in the G column as shown below. the formula which can yield the result?
Sheet2 ABCDEFG1LocationJohnTrevorMikeBillDukeDesired
Result2AYes John3B YesYes YesTrevor/Mike/Duke4CYes Yes John/Bill5DYesYesYesYesYesJohn/Trevor/Mike/Bill/Duke
I have a VBA form and on form initialize I want to populate a combo box… My array to populate it with could be a massive list so I need to set my array before it populates
I have this code so far but I need my array to be from A5 to the last row in sheet 1
I know how to set an exact range but not one that changes.
VB:
Dim myArray As Variant
myArray =
With Me.ComboBox1
.List = myArray
End With
Here is a sample of the data I need to populate in the combobox.
client_ref
A0008
A024
AA005
AA009
[Code] ....
I have a userform (uf_PaxInput) with a Combobox (cmb_flight_dest) which I am trying to populate from a worksheet range ("Dest") using the following code:
VB:
Sub LoadForm()
With uf_PaxInput.cmb_flight_dest
For Each Item In Range("Dest")
.AddItem
Next Item
End With
uf_PaxInput.Show
End Sub
The code seems to run okay however whent the form loads the combobox drops down to show only blank items to select. These blank items number them same number of items that are in my named range ("Dest").
I am looking for a way to have 1 combo box, but be able to click on any cell in a range and yield an individual results. In this particular case I am tracking maintenance, and what my crew's corrective actions were for each location. As this varies day by day I cannot use HLookup or VLookup. Also, the lists vary, and have over 100 options.
What I would like is to be able to click in the cell, and instead of scrolling through a list of 109 options be able to start typing the action and it to auto populate. This gets tedious when there are often 50+ locations with maintenance calls per night.
Furthermore, keeping the results exact for VLookup that is being used on another sheet.
I've attached a blank sheet. Columns B, E, F, & H each would ideally have their own combo box. I could click on any cell in the column and when I begin typing the option it would autofill to the correct list item.
Their respective List are currently to the right under columns J, L, N, & P with their headers matching the exact name they've been given.
I need to link the textboxes of a form to the appropriate cells associated to the selection made by a combobox. And in the process I need to be able to Edit one of those Textboxes on the fly while the rest will be locked to the user.
Not sure if the editing of the Notes section can be real time of if it must be updated through a button.
Ive got 12 sheets, one for each month, and I've got a combobox in each sheet, and Ive got a macro for each combobox, that makes it jump to the correct sheet number. The problem is that when I try to populate the comboboxes under the workbook_open() sub, it doesnt work.
Tried
Code:
Private Sub workbook_open()
ComboMaaned.List = Array("Januar", "Februar", "Mars", "April", "Mai", "Juni", "Juli", "August", _
"September", "Oktober", "November", "Desember")
End Sub
tried with
Code:
Sheets("Sheet1").select
and
Code:
Sheets("Sheet1").ComboMaaned.list = Array ...
Seems to crash every time.
How do we populate a List Box based on two Combo Box Selection on a userform?
Sheet2 has 5 Columns of datas all the way down...
Combobox1 is the Column A
Combobox2 is the Column B
I am trying to populate (via VBA) a textbox/combo box from one user form to another user form.
The first user form has a room number in a text box1. If certain conditions exists, a button is selected to bring up another user form (both forms are modeless).
I want to pass/populate some of the 1st user Form info into the other user form.
I have tried the on initialize textbox1.value = textbox other.value but no dice. I can populate a user form text box from a spreadsheet but from box to box in separate user forms has me a little stumped.
I want to create a userform that selects a Staff members name from a combo box, once selected the listbox would then display what time off that person has taken - ultimately I would then like to be able to select a date taken and either edit or delete it from the sheet that holds the information.
View 7 Replies View RelatedI have a userform with a combobox and a textbox, I would like that when I click the dropdown on the combobox I can pick an item from a list found on a spreadsheet in column A. This spreadsheet has two columns of data A & B. I would like to automatically populate the textbox with the data (from Column B) based on what was chosen in the combobox for (column A).
Example
A B
Don $5.00
John $6.75
Jerry $4.75
If I was to pick John in the combobox, I would like for the textbox to populate with $6.75.
I have a userform that contains 5 combobox. The userform will be initilized on sheet1 and the data is on sheet3 in the following columns:
Combobox1 = sheet3 ("A3:A6000")
Combobox2 = sheet3 ("B3:B6000")
Combobox3 = Sheet3 ("C3:C6000")
Combobox4 = sheet3 ("D3:D6000")
Combobox5 = sheet3 ("E3:E6000")
Combobox6 = sheet3 ("F3:F6000")
When the userform is loaded, I want the data in each range to be available in the dropdown for each respective combobox. It would be great if spaces can be removed from each list, but from what I read, this may be an issue.
How I can refer to sheet...Without activating sheet. i have this
Private Sub carga_click()
Sheets("Codigos de Area").Select
Sheets("Codigos de Area"). Cells(1, 2).Select
While ActiveCell <> ""
ActiveCell.Offset(1, 0).Select
ComboBox1.AddItem ActiveCell
Wend
End Sub
I use
Set rnData = ActiveSheet. Range("ProductList")
vaData = rnData.Value
With Me.model
.Clear
.List = vaData
.ListIndex = -1
End With
to populate a combobox list. 'ProductList' is a Dynamic Named Range with the definition
=OFFSET(Stock_List!$L$2,0,0, COUNTA(Stock_List!$L:$L)-1,1)
The '-1' allows for a heading at the top of the column.
This works fine when the list in col. L has more than one entry under the heading. But with only one entry I get 'Runtime error 381 - Could not set the List property, Invalid property array index' and the debug highlights on
.list=vaData
I have created a userform to keep track of "Customer Call Cycle".
This is what I have:
1) I have 3 Sales Reps with 50 Customers each.
2) Each customer has multiple contact persons
I have a userform with 2 combo boxex, 1 list box, 1 textbox and 2 buttons.
I want to be able to select Sales Rep from the 1st combobox which will automatically populate the second combobox with customer names related to that sales rep.
and when I select a customer name from 2nd combobox, I want all the contact persons in the database that are related to that customer name to populate in the listbox.